Hi. I have HTC one and just installed NAdroid Revolution 20 by mike with Android 4.3. TO use the Sense 5 toolbox I know you need xposed. One of the mods I use is battery percentage inside icon. It works when i activate it but everytime i restart my phone the percentage goes away. Is there a way to keep it on all the time
Mods
ramsharmjarm said:
Hi. I have HTC one and just installed NAdroid Revolution 20 by mike with Android 4.3. TO use the Sense 5 toolbox I know you need xposed. One of the mods I use is battery percentage inside icon. It works when i activate it but everytime i restart my phone the percentage goes away. Is there a way to keep it on all the time
Click to expand...
Click to collapse
Sorry to be jumping on your thread without an answer for you but I have the exact same setup as you but none of the mods will activate when I reboot! I have Xposed installed as well which appears to be working but won't permit a reboot, so I downloaded Quick Boot instead to do this. Not sure if that is related to the mods not activating, there are one set of mods that do activate and these are CleanBeam Mods by vomer but nothing else.
More chance of a reply if we have 2 similar problems!
Just a heads up. If you have Android Revolution HD Google Play Edition (3.2 and below) and love GravityBox, may be worth holding off. I flashed 4.0 and GravityBox stopped working. When I try to launch it, I get the error "GravityBox system framework not responding. Exiting."
I guess I'll wait until GravityBox is updated because the new ARHD is great. Super smooth.
Anyway, curious if it is working for anyone that has already updated?
mcox1124 said:
Just a heads up. If you have Android Revolution HD Google Play Edition (3.2 and below) and love GravityBox, may be worth holding off. I flashed 4.0 and GravityBox stopped working. When I try to launch it, I get the error "GravityBox system framework not responding. Exiting."
I guess I'll wait until GravityBox is updated because the new ARHD is great. Super smooth.
Anyway, curious if it is working for anyone that has already updated?
Click to expand...
Click to collapse
It's not working for me either. I also have a problem with BusyBox. I upgraded from 3.2 to 4.0 earlier today. BusyBox says there's an update. The ROM came with v1.21.0.git installed to /system/xbin, but when I try to install 1.21.1 I get a message saying "It looks like BusyBox is installed, but It does not appear to be the version you selected to have installed, you may want to try the installation again but this time using a different installation location".
Not sure if they're related, though.
Probably the same root cause. I'm guessing they just aren't compatible with the updated firmware. I tried installing the GravityBox update but the issue persisted.
Sent from my HTC One using Tapatalk 4
Well, I seemed to have fixed it up. It was probably a noob fix. I had to install/update Xposed and reboot. This ended up fixing GravityBox (I was still on 2.5.5 at the time). I've since upgraded to GB 2.5.7, and had some issues, but cleaned the framework, reactivated the GB module, and rebooted and all is well again.
I cannot turn my Bluetooth on using any of the toggles nor any program I've tried.
HTC One Dev. Edition Rooted
Android Revolution 30 ROM
Sense 5 and Exposed Toolbox Installed, but not activated right now.
Its embarrassing, but I have no idea WHAT I did that could have done this. Aside from Revolution and Exposed, I have no really flashed anything like a firmware or a radio in months. Aside from the "Flash back to stock and see if it works then" does anyone have any ideas? Its happened in the last few weeks sometime (I use it infrequently).
Copp said:
I cannot turn my Bluetooth on using any of the toggles nor any program I've tried.
HTC One Dev. Edition Rooted
Android Revolution 30 ROM
Sense 5 and Exposed Toolbox Installed, but not activated right now.
Its embarrassing, but I have no idea WHAT I did that could have done this. Aside from Revolution and Exposed, I have no really flashed anything like a firmware or a radio in months. Aside from the "Flash back to stock and see if it works then" does anyone have any ideas? Its happened in the last few weeks sometime (I use it infrequently).
Click to expand...
Click to collapse
Try fixing permissions of the Bluetooth.apk in /system/app
Alright, so I posted a thread a while back regarding how MagicJack crashes on my HTC One (M7). I simply open the app, it remains on a black screen for about 5 seconds then it crashes.
I am on ARHD 61.1.
I have tried all of these solutions:
-reinstall the app from Playstore
-reinstall the app from another source
-reinstall the app from both of the above with autosync off
-installed an earlier version of the app
-flashed the following roms: ARHD, Viper, Maximus (same issue on all roms)
-did a full wipe of my phone from TWRP
-reflashed ARHD again, and this is where I am at now
So I even took the extreme routes and it still didn't help. It simply just doesn't work with my phone.
Can anyone help me out with fixing this problem?
I have link of the logcat of when I try to open up MagicJack... http://pastebin.com/Gb90s8AH
Sorry for double posting.... this is the last time. If no one has any ideas this time then I'll give it up.
So I had a problem like this earlier, the issue was that everytime I installed a new rom, one of the first things I did was install Android Tuner and let that app install a lot of tweaks to speed up the system, and some of the tweaks in the build.prop caused a certain app to keep crashing because it kept running out of memory. Have you installed any tweaks after flashing any of the roms?
Prophet16 said:
So I had a problem like this earlier, the issue was that everytime I installed a new rom, one of the first things I did was install Android Tuner and let that app install a lot of tweaks to speed up the system, and some of the tweaks in the build.prop caused a certain app to keep crashing because it kept running out of memory. Have you installed any tweaks after flashing any of the roms?
Click to expand...
Click to collapse
Well first I was on ARHD 52. MagicJack didn't work, so I figured it was an issue with ARHD.
When ARHD 53 came out a couple of days ago, it STILL didn't work. At that point I figured something must have been wrong.
(I do install the ElementalX kernel (specifically for double tap to wake, I keep everything else at stock.)
But this time, I completely wiped my phone. I installed a fresh ARHD 61.1, and I tried out MagicJack BEFORE I installed ElementalX again. Turned out, MagicJack still didn't work.
So other than ElementalX, I do not install any tweaks.
Well that's odd,sometimes a clean install of a rom is still not enough to make a certain problem go away. I had issues with a specific base, when I install 4.19.401.8 base, I can't sign in to Google, but when I install a newer or older base, the problem is gone. Now if I were to install the same base over and over again the problem would resurface in a different base. So I decided to use the stock AT&T RUU and start over. The RUUs usually restore nearly everything. So I think you should give that a try. And if you can try to run an RUU exe, not a zip.
Prophet16 said:
Well that's odd,sometimes a clean install of a rom is still not enough to make a certain problem go away. I had issues with a specific base, when I install 4.19.401.8 base, I can't sign in to Google, but when I install a newer or older base, the problem is gone. Now if I were to install the same base over and over again the problem would resurface in a different base. So I decided to use the stock AT&T RUU and start over. The RUUs usually restore nearly everything. So I think you should give that a try. And if you can try to run an RUU exe, not a zip.
Click to expand...
Click to collapse
Problem with that is... I have a Latin American International HTC One with a CID which is not supported by any RUU.
So I SuperCID'd to 11111111, and none of the RUUs seem to work.
(so I'm probably not selecting the correct RUU)
But tell you what. I'm going to do another wipe. I'm going to start again from the beginning with a new TWRP, new rom, and new everything.
If at this point MagicJack is STILL not working, then I'm literally out of ideas and I'll try RUUing.
Okay so I formatted and wiped my entire again, and I flashed a new TWRP, and I had no OS installed (nearly bricking my device). I installed a clean ARHD 61.1, and everything was from the beginning. I didn't sync any account, I didn't add the Google account either.
All I did was download Root Explorer, and installed a MagicJack.apk I downloaded from another source. It STILL didn't work. wtf
At this point, I'm going to assume that MagicJack needs to update their app and that it's not my phones fault.
It's just weird because for other people it works on ARHD 61.1.
The RUU might not work if your device is unlocked, you'll have to re-lock the bootloader to use an RUU.exe. But guess what, I decided to find the app and install it myself to see what's going on and I have the same issue. I'm running 4.19.401.11 base, the rom is my own and I have Elemental X kernel, so I think it's just the developers messing up here.
Prophet16 said:
The RUU might not work if your device is unlocked, you'll have to re-lock the bootloader to use an RUU.exe. But guess what, I decided to find the app and install it myself to see what's going on and I have the same issue. I'm running 4.19.401.11 base, the rom is my own and I have Elemental X kernel, so I think it's just the developers messing up here.
Click to expand...
Click to collapse
Ohh, so you're getting a black screen and just having the app crash too? Then yeah... the developers messed up.
Guess all that wiping went nowhere... at least I have a fresh start though. (didn't mean it to sound disgusting)
arbank94 said:
Ohh, so you're getting a black screen and just having the app crash too? Then yeah... the developers messed up.
Guess all that wiping went nowhere... at least I have a fresh start though. (didn't mean it to sound disgusting)
Click to expand...
Click to collapse
Yeah I'm sure they'll get it fixed.
I awaiting a fix for this problem as well. It sucks that magicjack doesnt seem to be working on sense roms. I have this same problem when I was using 4.3 as well but only on sense roms.
Same problem here on ARHD 53. I open Magic Jack, get the black screen for 10-20 seconds, then it exits. I wouldn't call it crashing because I don't get any error displayed.
I tried clearing data plus uninstalling and reinstalling multiple times and it always gives this result.
Is there anyone who has been able to get Magic Jack to work with the M7?
magicJack has been finally fixed, but only on the newest InsertCoin roms. I really wish Android Revolution HD would fix the problem as well since I prefer it over the former...
arbank94 said:
magicJack has been finally fixed, but only on the newest InsertCoin roms. I really wish Android Revolution HD would fix the problem as well since I prefer it over the former...
Click to expand...
Click to collapse
I have the same problem with Magicjack. Waiting for fixing from ARHD!
QuangAK said:
I have the same problem with Magicjack. Waiting for fixing from ARHD!
Click to expand...
Click to collapse
I'm sorry for the huge bump.
But, Android Revolution HD 81 has fixed the magicJack issue!! (for me at least) I simply flashed the zip, and installed with Sense 6 Toolbox. So I can finally remotely use my magicJack app.
http://forum.xda-developers.com/showthread.php?t=2183023
arbank94 said:
I'm sorry for the huge bump.
But, Android Revolution HD 81 has fixed the magicJack issue!! (for me at least) I simply flashed the zip, and installed with Sense 6 Toolbox. So I can finally remotely use my magicJack app.
http://forum.xda-developers.com/showthread.php?t=2183023
Click to expand...
Click to collapse
Thank you! I will try ARHD 82 (current version)
I have been happily running ViperOne 5.8 for a while.
When trying to upgrade to the 6.0.0, after the updating apps window finished, a very persistent window kept reappearing : setup wizard has stopped working. I pressed OK a few dozen times before giving up on that.
I was able to access the notification bar and the venom tweaks were working too, so I was able to access Task Manager (through a longpress setup in tweaks in 5.8) and kill the process . I noticed that I had lost all my settings; screensaver, folders, downloaded apps were gone, etc. When I went to recovery I saw that the TWRP 2.7 I had was back to 2.6.3.3 and the red HTC warning was back.
Now I'm back to my Nandroided ? Viperone 5.8 no issues.
I haven't seen any reports on this yet. Thoughts or solutions?
Thanks for the great work everyone on this forum.
Surlyinvancouver said:
I have been happily running ViperOne 5.8 for a while.
When trying to upgrade to the 6.0.0, after the updating apps window finished, a very persistent window kept reappearing : setup wizard has stopped working. I pressed OK a few dozen times before giving up on that.
I was able to access the notification bar and the venom tweaks were working too, so I was able to access Task Manager (through a longpress setup in tweaks in 5.8) and kill the process . I noticed that I had lost all my settings; screensaver, folders, downloaded apps were gone, etc. When I went to recovery I saw that the TWRP 2.7 I had was back to 2.6.3.3 and the red HTC warning was back.
Now I'm back to my Nandroided ? Viperone 5.8 no issues.
I haven't seen any reports on this yet. Thoughts or solutions?
Thanks for the great work everyone on this forum.
Click to expand...
Click to collapse
5.8 to 6.0 is a full version update do a factory reset / wipe before install
clsA said:
5.8 to 6.0 is a full version update do a factory reset / wipe before install
Click to expand...
Click to collapse
Thank you, that did it.
Funny, I thought I'd tried that , but only after flashing the 6.0.
Thanks again from a Noob.
Viper install stuck in boot loop after complete
Surlyinvancouver said:
I have been happily running ViperOne 5.8 for a while.
When trying to upgrade to the 6.0.0, after the updating apps window finished, a very persistent window kept reappearing : setup wizard has stopped working. I pressed OK a few dozen times before giving up on that.
I was able to access the notification bar and the venom tweaks were working too, so I was able to access Task Manager (through a longpress setup in tweaks in 5.8) and kill the process . I noticed that I had lost all my settings; screensaver, folders, downloaded apps were gone, etc. When I went to recovery I saw that the TWRP 2.7 I had was back to 2.6.3.3 and the red HTC warning was back.
Now I'm back to my Nandroided ? Viperone 5.8 no issues.
I haven't seen any reports on this yet. Thoughts or solutions?
Thanks for the great work everyone on this forum.
Click to expand...
Click to collapse
I have installed the viperone on my htc one m8. however after the install and it reboots. it reboots back to boot loader and I am currently stuck there. Any help would be appreciated.