Database Develop

Moto x At&t rooted and I Can't update to 4.4.4

Hello xda community I have problem I have At&t unlocked boot loader 4.4.2 rooted and I receive the ota I Can't update to 4.4.4 when press install it reboot to recovery and show message in red color "security failed recovery downgraded"
Pls help me

MoMoGAX said:
Hello xda community I have problem I have At&t unlocked boot loader 4.4.2 rooted and I receive the ota I Can't update to 4.4.4 when press install it reboot to recovery and show message in red color "security failed recovery downgraded"
Pls help me
Click to expand...
Click to collapse
You will not be able to take an ota with a rooted rom. The rom must be unmodified in any way for the ota to succeed in the upgrade. So your only chance is to either unroot the rom or factory restore the rom. If you factory restore, remember to backup your data.

iam on stock rom and I can't factory reset it show me the same message

MoMoGAX said:
iam on stock rom and I can't factory reset it show me the same message
Click to expand...
Click to collapse
You just said you were rooted, and you can not be rooted to take an ota. I am pretty sure of it.

Thanks for replay but Iam rooted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Root=no upgrade. FleetPhone is saying because you are rooted your phone will not update. You can't have root.

Guys....it's not about being rooted. It's about NOT having STOCK RECOVERY, *or* about changes that were made to /system.
Usually just being rooted won't stop you from taking updates. But you can NOT take an update without Stock Recovery. You probably have TWRP recovery still installed - this will prevent the OTA from installing.
Aside from that, any significant modifications to /system, for example Xposed will need to be uninstalled first.
If you can't figure out the problem, use RSD Lite to flash the entire 4.4.2 ROM, then you can take the OTA.
NEVER DOWNGRADE. You can only do this because you are still on 4.4.2 and haven't updated to 4.4.4. Once on 4.4.4, any attempt to downgrade will likely result in a brick.
Good Luck :good:

You must hide root with SuperSU & use STK recovery

I just got ota last night for att. Is there any root method?

cell2011 said:
I just got ota last night for att. Is there any root method?
Click to expand...
Click to collapse
Nope, not unless you unlock through the China middleman. Just search 'China middleman' and you will find the thread.
Good luck

MoMoGAX said:
Hello xda community I have problem I have At&t unlocked boot loader 4.4.2 rooted and I receive the ota I Can't update to 4.4.4 when press install it reboot to recovery and show message in red color "security failed recovery downgraded"
Pls help me
Click to expand...
Click to collapse
Hey I have the same att moto x. Could you please tell me how you unlocked your bootloader? And rooted? Thanks a lot man.

alimzia said:
Hey I have the same att moto x. Could you please tell me how you unlocked your bootloader? And rooted? Thanks a lot man.
Click to expand...
Click to collapse
I didn't unlocked the boot loader I used jcase root method slap my moto from 4.2.2

I have the OTA 4.4.4 and cant root any suggestions?

MoMoGAX said:
Hello xda community I have problem I have At&t unlocked boot loader 4.4.2 rooted
Click to expand...
Click to collapse
MoMoGAX said:
I didn't unlocked the boot loader I used jcase root method slap my moto from 4.2.2
Click to expand...
Click to collapse
?
Sent from my XT1060

rocketsaucev2 said:
?
Sent from my XT1060
Click to expand...
Click to collapse
Sorry it's locked boot loader I root on 4.2.2 then I enable survival mode in super su then take ota to 4.4.2 but I don't l don't know if I install the stock firmware using rsd I will lose the root I will give it try

MoMoGAX said:
Sorry it's locked boot loader I root on 4.2.2 then I enable survival mode in super su then take ota to 4.4.2 but I don't l don't know if I install the stock firmware using rsd I will lose the root I will give it try
Click to expand...
Click to collapse
Yes, you'll lose root by using rsd
Sent from my XT1060

I have AT&T Moto X with unlocked bootloader and root. All I did to take update was restore stock recovery and apply 4.4.2 system.img to ensure there were not system changes and my phone accepted update fine (didn't lose anything either). Then I got root back I installed TWRP and SuperSU again. Done.
You can do all of this with the MotoX tookit. http://forum.xda-developers.com/moto-x/development/tool-moto-x-toolkit-v1-4-0-t2477132
Lots of great info and walkthroughs http://mark.cdmaforums.com/MotoX.htm

MoMoGAX said:
I didn't unlocked the boot loader I used jcase root method slap my moto from 4.2.2
Click to expand...
Click to collapse
MoMoGAX said:
Sorry it's locked boot loader I root on 4.2.2 then I enable survival mode in super su then take ota to 4.4.2 but I don't l don't know if I install the stock firmware using rsd I will lose the root I will give it try
Click to expand...
Click to collapse
Ok, your problem of not being able to take the OTA... that is because of how SlapMyMoto works, and tricks it plays to give you root and write protection disabled.
If you want to take the OTA, you will have no choice but to flash completely back to stock (using RSDLite) and WILL lose root. For how, see -> http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Keep in mind that with a LOCKED bootloader, you will NOT be able to DISABLE Write Protection when on 4.4.2 and above. If on 4.4.2, PIE or TOWELPIEROOT can be used to root, but write protection will still be enabled, so root and changes made by root apps would be lost at power off/on or "hard boot" and root apps done have the ability to create files in /system and such. There is no root for 4.4.4 with locked bootloader. For more see -> http://forum.xda-developers.com/moto-x/general/one-stop-shop-how-root-moto-x-confusion-t2826159 its not a very long thread, so please read ALL of it... including Post #70 of that thread
And before you ask... No, if you are on 4.4.4 you can NOT fully downgrade to 4.4.2 or lower. If you are on 4.4.2 you can NOT fully downgrade to 4.4 (aka 4.4.0) or lower! If you try, you will likely brick your phone or set it up to brick with future OTA's. (this is true for locked and Unlocked bootloaders)
IF you have an ATT, Verizon or Republic wireless, you can try the China Middleman thread in the general section to see if you can get a bootloader unlock code if you want to root and disable write protection no matter what ROM is on your phone.

KidJoe said:
Ok, your problem of not being able to take the OTA... that is because of how SlapMyMoto works, and tricks it plays to give you root and write protection disabled.
If you want to take the OTA, you will have no choice but to flash completely back to stock (using RSDLite) and WILL lose root. For how, see -> http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Keep in mind that with a LOCKED bootloader, you will NOT be able to DISABLE Write Protection when on 4.4.2 and above. If on 4.4.2, PIE or TOWELPIEROOT can be used to root, but write protection will still be enabled, so root and changes made by root apps would be lost at power off/on or "hard boot" and root apps done have the ability to create files in /system and such. There is no root for 4.4.4 with locked bootloader. For more see -> http://forum.xda-developers.com/moto-x/general/one-stop-shop-how-root-moto-x-confusion-t2826159 its not a very long thread, so please read ALL of it... including Post #70 of that thread
And before you ask... No, if you are on 4.4.4 you can NOT fully downgrade to 4.4.2 or lower. If you are on 4.4.2 you can NOT fully downgrade to 4.4 (aka 4.4.0) or lower! If you try, you will likely brick your phone or set it up to brick with future OTA's. (this is true for locked and Unlocked bootloaders)
IF you have an ATT, Verizon or Republic wireless, you can try the China Middleman thread in the general section to see if you can get a bootloader unlock code if you want to root and disable write protection no matter what ROM is on your phone.
Click to expand...
Click to collapse
Thank you for help and quick reply you made my day

At&t rom is fkn awesome in batery life

Re-locked Bootloader and now facing problems

Hi there this is my first post so excuse me if i'm unclear about stuff. if you need any info just gimme a shout and i can find it for you!
I have an M7 on O2 (UK), I've had it pretty much since it release in 2013.
Upon getting the phone i immediately rooted whilst on Android Version 4.4.3, it's the Sense Version too (i don't know if that's relevant or not).
Anyway it's been a while since this, and i've lost a lot of the knowledge i had on Android & Rooting etc.
I'm looking to un-root my phone to get the OTA Updates which have been alerting my (very annoying) since 2013!
Last week i began watching tutorials and reading up, a few days in and i gave it my first attempt..
I first re-locked my Bootloader successfully and then tried using the RUU Software but was unlucky with numerous versions (i'm still unsure about how to find the RIGHT one). After hours & hours i was at and end and couldnt seem to find the right one for my phone and i gave up.
Since "re-locking" my Bootloader i've been facing an issue where every time i power up or restart my phone it boots in the Bootloader's Fastboot mode, from here i have to navigate to 'reboot'... the phone then restarts and this time round i get my usual home screen.
I'm unsure as to what direction to go now as i'm scared i will brick my phone, i guess i have 2 options;
A. Continue to try and return to stock and then decide if i wish to re-root (probably not)
B. Unlock the Bootloader once again (only this will wipe my phone, and i can't find the original stock rom thus leading to a brick i expect?)
Hope someone can help, any questions please do not hesitate to ask!

gemodubz said:
Hi there this is my first post so excuse me if i'm unclear about stuff. if you need any info just gimme a shout and i can find it for you!
I have an M7 on O2 (UK), I've had it pretty much since it release in 2013.
Upon getting the phone i immediately rooted whilst on Android Version 4.4.3, it's the Sense Version too (i don't know if that's relevant or not).
Anyway it's been a while since this, and i've lost a lot of the knowledge i had on Android & Rooting etc.
I'm looking to un-root my phone to get the OTA Updates which have been alerting my (very annoying) since 2013!
Last week i began watching tutorials and reading up, a few days in and i gave it my first attempt..
I first re-locked my Bootloader successfully and then tried using the RUU Software but was unlucky with numerous versions (i'm still unsure about how to find the RIGHT one). After hours & hours i was at and end and couldnt seem to find the right one for my phone and i gave up.
Since "re-locking" my Bootloader i've been facing an issue where every time i power up or restart my phone it boots in the Bootloader's Fastboot mode, from here i have to navigate to 'reboot'... the phone then restarts and this time round i get my usual home screen.
I'm unsure as to what direction to go now as i'm scared i will brick my phone, i guess i have 2 options;
A. Continue to try and return to stock and then decide if i wish to re-root (probably not)
B. Unlock the Bootloader once again (only this will wipe my phone, and i can't find the original stock rom thus leading to a brick i expect?)
Hope someone can help, any questions please do not hesitate to ask!
you can also contact me here [email protected]
Click to expand...
Click to collapse
Post the output of "fastboot getvar all" (hide your imei and sn)

alray said:
Post the output of "fastboot getvar all" (hide your imei and sn)
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

gemodubz said:
Click to expand...
Click to collapse
If you want to return to stock, you can use the 7.18.206.51 ruu (its the latest version for your phone)
Instructions as post #1, ruu at post #2:
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Once the RUU flashed you can unlock the bootloader again and re-root. Be sure to use the latest version of supersu.

alray said:
If you want to return to stock, you can use the 7.18.206.51 ruu (its the latest version for your phone)
Instructions as post #1, ruu at post #2:
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Once the RUU flashed you can unlock the bootloader again and re-root. Be sure to use the latest version of supersu.
Click to expand...
Click to collapse
Thanks a bunch man! Please could you tell me how you found the specific RUU for my phone?
Please could you tell me the method you used to locate the RUU as i had so much trouble before, i was wondering if there is an easy way find the correct RUU (by looking for certain codes etc) ?

alray said:
If you want to return to stock, you can use the 7.18.206.51 ruu (its the latest version for your phone)
Instructions as post #1, ruu at post #2:
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Once the RUU flashed you can unlock the bootloader again and re-root. Be sure to use the latest version of supersu.
Click to expand...
Click to collapse
won't unlocking the bootloader after flashing RUU just wipe the phone again?

gemodubz said:
won't unlocking the bootloader after flashing RUU just wipe the phone again?
Click to expand...
Click to collapse
Unlocking will wipe user data only.
Sent from my HTC One using XDA Labs

alray said:
Unlocking will wipe user data only.
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
So would that be my media files like photos, music, apps etc?

gemodubz said:
So would that be my media files like photos, music, apps etc?
Click to expand...
Click to collapse
Exactly
Sent from my HTC One using XDA Labs

How can i back to Factory ROM TMOBILE?

Hi everybody,
I have an LG G4 H811, i installed TWR and a Custom ROM CyanogenMod. Im from Chile [sorry for my english ;( ], and now i need to unlock the phone, to make calls. I have always bought the unlock code through a page, but it seems that this model is through the app tmobile. I need to factory software to unlock by thirds.
Please help!
Sorry for my english, is very poor, i did my best

shakarder said:
Hi everybody,
I have an LG G4 H811, i installed TWR and a Custom ROM CyanogenMod. Im from Chile [sorry for my english ;( ], and now i need to unlock the phone, to make calls. I have always bought the unlock code through a page, but it seems that this model is through the app tmobile. I need to factory software to unlock by thirds.
Please help!
Sorry for my english, is very poor, i did my best
Click to expand...
Click to collapse
what android version you have right now.? you want to flash sotck firmware from tmobile. right
you need a KDZ file and LGUP program. but tell me whats you android version? 10n-20i or 20o?
because there is antiroll back and you need to know wich one you have so you can download correct KDZ file. and not hard brick phone.

raptorddd said:
what android version you have right now.? you want to flash sotck firmware from tmobile. right
you need a KDZ file and LGUP program. but tell me whats you android version? 10n-20i or 20o?
because there is antiroll back and you need to know wich one you have so you can download correct KDZ file. and not hard brick phone.
Click to expand...
Click to collapse
I think the version 20i had before, and then I put a ROM CyanogenMod with TWR recovery. This is what shows the system now:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

shakarder said:
I think the version 20i had before, and then I put a ROM CyanogenMod with TWR recovery. This is what shows the system now:
Click to expand...
Click to collapse
not sure about the unlocking maybe try with Tmobile if not buy the unlock code and yes its expensive..
to go back to stock firmware if you were on 20i
i would say wipe in twrp then go into download mode... make dure you can go into download mode first.
install LGUP phone drivers i assume you have them.
select in LGUP upgrade so KDZ will show up select it. then close the LGUP program , open it now tick the refurbished so this way it wipes everything and press start and let it finish flashing.
heres KDZ 20i and if you read LGUP link
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
if you want latest 20o.. here but once you are on 20o you can not go back to lollipop 10n. or 20i.. youll be stuck there. link of KDZ in bottom if you dont know how to use LGUP search LGUP LG G4..
http://forum.xda-developers.com/tmo...ck-guide-h811-20-o-bootloader-unlock-t3421589

I can install "LG-H81120i-Flashable.COMPLETE.zip" directly with the TWR, clicking on install, select the .ZIP, and reboot? The other form of LG Up do not know. "Download Mode" not know what that is.

raptorddd said:
not sure about the unlocking maybe try with Tmobile if not buy the unlock code and yes its expensive..
to go back to stock firmware if you were on 20i
i would say wipe in twrp then go into download mode... make dure you can go into download mode first.
install LGUP phone drivers i assume you have them.
select in LGUP upgrade so KDZ will show up select it. then close the LGUP program , open it now tick the refurbished so this way it wipes everything and press start and let it finish flashing.
heres KDZ 20i and if you read LGUP link
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
if you want latest 20o.. here but once you are on 20o you can not go back to lollipop 10n. or 20i.. youll be stuck there. link of KDZ in bottom if you dont know how to use LGUP search LGUP LG G4..
http://forum.xda-developers.com/tmo...ck-guide-h811-20-o-bootloader-unlock-t3421589
Click to expand...
Click to collapse
Done!! I have again Tmobile Stock ROM. Thank you man!! Now i have H81120i
Thank you. Now im going to buy the Unlock Code xD!! because my device is not eligible for unlock.
Thank you again

shakarder said:
Done!! I have again Tmobile Stock ROM. Thank you man!! Now i have H81120i
Thank you. Now im going to buy the Unlock Code xD!! because my device is not eligible for unlock.
Thank you again
Click to expand...
Click to collapse
am glad i could help, good luck with the unlock thingy.. :good:

[TUT] Debrand Sprint hTC 10, flash any RUU, any firmware then unlock simcard

After figured out how to flash any firmware without change the radio, now I'm going further to flash any RUU into my Sprint hTC 10. Not really Debrand but still promising
Before we start, please read my old TUT for more experience: http://forum.xda-developers.com/sprint-htc-10/how-to/tut-flash-firmware-sprint-htc-one-t3458721
Now we start. As everyone already know, the only reason we can't flash any RUU because It'll lock your sim card and your imei and we all know the method to debrand any hTC one or ever other version of hTC 10. That's why I am going to do the same method.
1/ S-off, Change CID, MID (Super CID if you want)
2/ Download RUU that match your MID
3/ Download the Sprint radio here https://drive.google.com/open?id=0B3JWmvvPdlHZYUdGVUVraGZsZmc
4/ Flash radio
5/ Check Radio version. It must be [email protected]
Ok, now U can use your hTC 10 with working radio. For someone isn't using sprint simcard, Unlock the simcard using this following method:
6/ download any Sprint carrier supported rom like Viper, Leedroid, etc
7/ TWRP
8/ Choose carrier as Sprint inside Aroma, flash it
9/ Unlock sim card following this TUT http://forum.xda-developers.com/sprint-one-m9/general/nv-unlock-sim-t3314755

Ryan Long said:
After figured out how to flash any firmware without change the radio, now I'm going further to flash any RUU into my Sprint hTC 10. Not really Debrand but still promising
Before we start, please read my old TUT for more experience: http://forum.xda-developers.com/sprint-htc-10/how-to/tut-flash-firmware-sprint-htc-one-t3458721
Now we start. As everyone already know, the only reason we can't flash any RUU because It'll lock your sim card and your imei and we all know the method to debrand any hTC one or ever other version of hTC 10. That's why I am going to do the same method.
1/ S-off, Change CID, MID (Super CID if you want)
2/ Download RUU that match your MID
3/ Download firmware update that match your RUU carrier for most compatible here http://forum.xda-developers.com/show....php?t=3387520
4/ Open your firmware update zip file, delete radio.img, save it.
5/ Download the Sprint radio here https://drive.google.com/open?id=0B3JWmvvPdlHZYUdGVUVraGZsZmc then import it to your firmware update zip file.
6/ Flash the RUU
7/ Flash the modified firmware update zip file.
8/ Check Radio version. It must be [email protected]
Ok, now U can use your hTC 10 with working radio. For someone isn't using sprint simcard, Unlock the simcard using this following method:
9/ download any Sprint carrier supported rom like Viper, Leedroid, etc
10/ TWRP
11/ Choose carrier as Sprint inside Aroma, flash it
12/ Unlock sim card following this TUT http://forum.xda-developers.com/sprint-one-m9/general/nv-unlock-sim-t3314755
Click to expand...
Click to collapse
Hi, friend, did you try this method? it works? Can I convert my htc 10 2ps64 to a 2PS65 without any errors in the applications?
Thank you

fello781 said:
Hi, friend, did you try this method? it works? Can I convert my htc 10 2ps64 to a 2PS65 without any errors in the applications?
Thank you
Click to expand...
Click to collapse
Of course at least everything works like a charm in my phone because I'm using cook rom Sprint carrier.
I still don't know what happen to your phone. In theory, you can convert to 2PS65 by this method. Change your RUU, your MID but I can't confirm there won't be any error because I haven't test in any original RUU. I only can confirm this method won't brick your phone and won't lock your imei then u can unlock your sim card manualy.
When I test with Ledroid, US Unlocked, applications still turned black so I'm back to Sprint carrier.
So sad but until now, I can't find any reason cause those troubles. Maybe because the different of hardware between 2PS64 & 2PS65. Too bad but so many people had trouble using Sprint phone outside original carrier.

Ryan Long said:
Of course at least everything works like a charm in my phone because I'm using cook rom Sprint carrier.
I still don't know what happen to your phone. In theory, you can convert to 2PS65 by this method. Change your RUU, your MID but I can't confirm there won't be any error because I haven't test in any original RUU. I only can confirm this method won't brick your phone and won't lock your imei then u can unlock your sim card manualy.
When I test with Ledroid, US Unlocked, applications still turned black so I'm back to Sprint carrier.
So sad but until now, I can't find any reason cause those troubles. Maybe because the different of hardware between 2PS64 & 2PS65. Too bad but so many people had trouble using Sprint phone outside original carrier.
Click to expand...
Click to collapse
Hello friend I need help I did the procedure as it is indicated in the tutorial but now the phone lost imei and signal, the radio is [email protected] and with no rom I get signal, I do not understand what happens already install several firmware and none get signal.
Please help every step after installing the modified firmware with the radio you said.
The strange thing is that if the firmware has a different radio I always see [email protected] as a radio.
I do not know what is happening
help plis

fello781 said:
Hello friend I need help I did the procedure as it is indicated in the tutorial but now the phone lost imei and signal, the radio is [email protected] and with no rom I get signal, I do not understand what happens already install several firmware and none get signal.
Please help every step after installing the modified firmware with the radio you said.
The strange thing is that if the firmware has a different radio I always see [email protected] as a radio.
I do not know what is happening
help plis
Click to expand...
Click to collapse
Have you flash the full RUU ? after U flash full RUU of other carrier, does your radio still [email protected] ?
U can back to original Sprint RUU and try again. U also can dump your own radio.img and put it into the firmware update.

lilares said:
Have you flash the full RUU ? after U flash full RUU of other carrier, does your radio still [email protected] ?
U can back to original Sprint RUU and try again. U also can dump your own radio.img and put it into the firmware update.
Click to expand...
Click to collapse
Hello friend if I have put the complete RUU and I keep the radio [email protected] but the signal is lost, the strange thing is that so put a firmware with another radio does not make changes.
I do not understand what happens

fello781 said:
Hello friend if I have put the complete RUU and I keep the radio [email protected] but the signal is lost, the strange thing is that so put a firmware with another radio does not make changes.
I do not understand what happens
Click to expand...
Click to collapse
that's strange. Have you try to flash radio once again using htc_fastboot ??

lilares said:
that's strange. Have you try to flash radio once again using htc_fastboot ??
Click to expand...
Click to collapse
My bad, hTC 10 can flash radio through bootloader. Please reboot into bootloader, flash radio using fastboot. You don't have to mod the firmware again.

fello781 said:
Hello friend if I have put the complete RUU and I keep the radio [email protected] but the signal is lost, the strange thing is that so put a firmware with another radio does not make changes.
I do not understand what happens
Click to expand...
Click to collapse
I'm just back to US Unlocked RUU and flash the radio. It would unlock my sim and Imei. Unfortunately, errors still occur for some app. I'm trying to disable some sensor to firure out cause of those problem

Ryan Long said:
My bad, hTC 10 can flash radio through bootloader. Please reboot into bootloader, flash radio using fastboot. You don't have to mod the firmware again.
Click to expand...
Click to collapse
I have tried many times to modify firmware by fasboot and nothing, also when installing a complete RUU of sprint with radio [email protected] I lose signal and the imei disappears
I'm lost I do not know what to do now I do not have a signal and the imei disappears, the radio I have is [email protected] because that shows in bootloader, and the rom is 2PS6IMG_1.80.651.20_RUU.zip.

Could you tell me from the beginning step by step what should I do to recover my htc 10 that now I can not have a signal do not recognize imei?
Which firmware should I install?
Which RUU?
soff
unlock
I appreciate help

fello781 said:
I have tried many times to modify firmware by fasboot and nothing, also when installing a complete RUU of sprint with radio [email protected] I lose signal and the imei disappears
I'm lost I do not know what to do now I do not have a signal and the imei disappears, the radio I have is [email protected] because that shows in bootloader, and the rom is 2PS6IMG_1.80.651.20_RUU.zip.
Click to expand...
Click to collapse
Download Sprint stock rom. Should be exe file. Flash it again. What it your MID now ? can U take some print screen ?

Ryan Long said:
Download Sprint stock rom. Should be exe file. Flash it again. What it your MID now ? can U take some print screen ?
Click to expand...
Click to collapse
cid 11111111 mid 2PS640000
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

try to flash cook rom, sprint carrier, flash radio again, unlock sim card

Ryan Long said:
try to flash cook rom, sprint carrier, flash radio again, unlock sim card
Click to expand...
Click to collapse
Ok friend, I already have it, I have a new signal and thanks for the help.
No black screen solution in applications?
thanks for your help

Ryan Long said:
After figured out how to flash any firmware without change the radio, now I'm going further to flash any RUU into my Sprint hTC 10. Not really Debrand but still promising
Before we start, please read my old TUT for more experience: http://forum.xda-developers.com/sprint-htc-10/how-to/tut-flash-firmware-sprint-htc-one-t3458721
Now we start. As everyone already know, the only reason we can't flash any RUU because It'll lock your sim card and your imei and we all know the method to debrand any hTC one or ever other version of hTC 10. That's why I am going to do the same method.
1/ S-off, Change CID, MID (Super CID if you want)
2/ Download RUU that match your MID
3/ Download the Sprint radio here https://drive.google.com/open?id=0B3JWmvvPdlHZYUdGVUVraGZsZmc
4/ Flash radio
5/ Check Radio version. It must be [email protected]
Ok, now U can use your hTC 10 with working radio. For someone isn't using sprint simcard, Unlock the simcard using this following method:
6/ download any Sprint carrier supported rom like Viper, Leedroid, etc
7/ TWRP
8/ Choose carrier as Sprint inside Aroma, flash it
9/ Unlock sim card following this TUT http://forum.xda-developers.com/sprint-one-m9/general/nv-unlock-sim-t3314755
Click to expand...
Click to collapse
This actually saved my mobile network, long story short, I flashed an unlocked US, played with AOSP, then tried to restore my nandroid after RUU back to Sprint. Long and short left me without mobile network which freaked me out. I went 4 hours trying to fix this with flashing modems, wiping, RUU'ing, then I ended up doing exactly this (without first finding this post). So skip ahead to now, I find your post and then the post on Viper, so I did just that, I flashed the open US mode, the installed Viper, selected Sprint and low and behold its working. Thanks for this post!

fello781 said:
Ok friend, I already have it, I have a new signal and thanks for the help.
No black screen solution in applications?
thanks for your help
Click to expand...
Click to collapse
Best news of the day, I've updated to US Unlock Nougat 7.0 and suddenly all the black screen gone. I don't have enough time to test but at least, the dialer, google map and some other app I knew would cause the black screen in Mashmallow now no longer black screen anymore.
Just update to latest US Unlocked with US Unlocked CID and MID then OTA to 7.0
U will lost root and TWRP. Maybe, we have to wait for a few day for a new TWRP

lilares said:
Best news of the day, I've updated to US Unlock Nougat 7.0 and suddenly all the black screen gone. I don't have enough time to test but at least, the dialer, google map and some other app I knew would cause the black screen in Mashmallow now no longer black screen anymore.
Just update to latest US Unlocked with US Unlocked CID and MID then OTA to 7.0
U will lost root and TWRP. Maybe, we have to wait for a few day for a new TWRP
Click to expand...
Click to collapse
You're on Nougat with Sprint calls and data still working?
Sent from my 2PS64 using Tapatalk

FlowingAway said:
You're on Nougat with Sprint calls and data still working?
Sent from my 2PS64 using Tapatalk
Click to expand...
Click to collapse
Cant confirm cause I'm traveling outside US so I'm using another carrier. Now the Nougat only available for US Unlocked so I need someone to check with sprint Carrier. Buts yes, U need to flash Sprint radio. I can confirm U can unlock your sim card with my old radio.img.

lilares said:
Best news of the day, I've updated to US Unlock Nougat 7.0 and suddenly all the black screen gone. I don't have enough time to test but at least, the dialer, google map and some other app I knew would cause the black screen in Mashmallow now no longer black screen anymore.
Just update to latest US Unlocked with US Unlocked CID and MID then OTA to 7.0
U will lost root and TWRP. Maybe, we have to wait for a few day for a new TWRP
Click to expand...
Click to collapse
Confirmed. Nougat will fix every problem about black screen.
Still no TWRP and also no root

Network Stopped Working - Need Help!

First of all, i have a bootloader locked XT1254 with SU4TL49 firmware. I use Nova Launcher and was just looking through Nova Shortcuts hoping to make a GSM/UMTS switch on my home screen. I came across BandMode under Settings, and accidentally clicked USA Band. After that my SIM couldnt find any network, i tried everything: Clicked USA Band, Cellular, changed network mode to Global and back to LTE / GSM / UMTS. I even tried everything in the hidden Phone Menu (RadioInfo). After nothing worked i tried Factory reset twice, but still the same.
The phone detects the SIM and shows the SIM contacts too, but cant find any network operators. I know the last thing to try is updating firmware to Marshmallow, but that would also close the window for bootloader unlock if i later need to repair the firmware through custom recovery.
Any help would be greatly appreciated. Screenshots on how to kill the Network and also get to hidden Phone Menu are attached.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

killerxda said:
First of all, i have a bootloader locked XT1254 with SU4TL49 firmware.
I know the last thing to try is updating firmware to Marshmallow, but that would also close the window for bootloader unlock if i later need to repair the firmware through custom recovery.
Click to expand...
Click to collapse
So, go ahead and unlock your bootloader right now. What are you waiting for? You still have Wi-Fi, right?
By the way, Sunshine works with Marshmallow now -- just not the most recent Marshmallow (MCG24.251-5-5, earlier this week). You can re-flash Su4TL-49 firmware or the first Marshmallow image, MCG24.251-5.
[FXZ] Official Stock Firmware 6.0.1 MCG24.251-5
https://forum.xda-developers.com/dr...official-stock-firmware-6-0-1-mcg24-t3531571\
Besides unlocking your bootloader, the first thing you can do is try to re-flash your Lolllipop radio:
firstEncounter said:
Instructions for using fastboot packages:
Code:
mfastboot flash radio radio.img
5.1 (SU4TL-49)
Fastboot package (Mirror)
SHA1 sum: a297a5fd84f906cdfacf4efb8c656babbfe2452f
Click to expand...
Click to collapse
If that doesn't work, then re-flash the entire SU4TL-49 firmware or flash the first Marshmallow image above. But go ahead and unlock your bootloader!

ChazzMatt said:
Besides unlocking your bootloader, the first thing you can do is try to re-flash your Lolllipop radio:
If that doesn't work, then re-flash the entire SU4TL-49 firmware or flash the first Marshmallow image above. But go ahead and unlock your bootloader!
Click to expand...
Click to collapse
Before your reply here i got to the radio thread and tried flashing SU4TL49 radio. BUT what i did was flash all 3 files (radio, GPT, bootloader) as instructed in that thread. Next thing i know my baseband is Unknown and no IMEI is being shown now..... The problems seem to be stacking up.
Was some file not compatible? Do i flash any files from SU4TL44 zip now?
EDIT: FINALLY!! After flashing GPT and Bootloader of SU4TL49 i flashed radio from SU4TL44 and the command fastboot oem config fsg-id ""
Everything back to normal now! :good: :highfive: :laugh: :victory:
Thanks to your reply on the other thread about 2G not working i found out about radio flashing possibility otherwise i was thinking nothing is possible on a locked bootloader :highfive:

Now go unlock your bootloader.

ChazzMatt said:
Now go unlock your bootloader.
Click to expand...
Click to collapse
Haha i think i'll just sell it soon and buy some other