Just curious on other peoples opinion/theory.
So while using my HTC One on AT&T the 3G signal jumps around. I assume its two towers one obviously being farther away and the phone doesn't seem to stick with the one that's closer. So if i force the phone to connect to WCDMA (3G/HSPA) no celluar service works on the device. Eventually I switch it back to 2G and then it starts receiving calls/sms etc. I have been to locations in the area where there are full bars of 3G constantly yet the phone fails to connect properly eventually I give up and switch to 2G at some points the phone drops down to GPRS.
On an international HTC 8X it maintains a strong connection to 3G/H+ using the same simcard. Only thing that has changed is the actual device. I've tried literally all the radios available for the HTC one and all have the same result.
If using a T-Mobile simcard and I go into an area that has been refarmed I pick their 3G/H+ just fine.
So it's not the simcard and its not the phone. I've called AT&T and all they do is make me turn off the phone while they resend the signal from the tower (so they say) then thats when the phones sticks to 3G and functions correctly but eventually it stops working and returns to how it was.
Right now AT&T offers the stronger call/sms coverage while T-Mobile doesn't so I'd rather stick with AT&T even if they suck.
So my question is.
Anyone else experiencing or has had this issue before on the HTC one or another device? If those who have had this was it resolved?
Was it a simple device exchange or were you bumped up the change of tech support eventually reaching some one who knew how to fix the issue or atlease gave more then "Please turn the device on/off, it will fix all your problems"
On my m7 I was able to talk on the phone and continue to use my internet connection. I don't seem to have that functionality on this device. Every time a receive a phone call it drops LTE. I thought running on two simultaneous networks (CDMA + LTE) I could do both. Anyone experiencing the opposite? Did I mess something up? Or is that just how this particular device is? Any input would be deeply appreciated. Thanks.
skuddy said:
On my m7 I was able to talk on the phone and continue to use my internet connection. I don't seem to have that functionality on this device. Every time a receive a phone call it drops LTE. I thought running on two simultaneous networks (CDMA + LTE) I could do both. Anyone experiencing the opposite? Did I mess something up? Or is that just how this particular device is? Any input would be deeply appreciated. Thanks.
Click to expand...
Click to collapse
well, lte is data only, calls cant go through lte. you need VoLTE to have voice over the lte network. and sprint doesnt offer volte, not yet at least. well, that or you need two radios in your device. the n6 only has one radio.
^This exactly. However, you can use WiFi, if available, and have the same functionality.
I completely understand what voice over LTE is and the fact that my phone uses CDMA for voice. My question was if my HTC one could use my LTE data and voice at the same time on the same network (even the same tower) why the heck can my n6 not do it? I'm actually disappointed with the lack of this functionality. I thought it was standard when sprint switched to LTE because it is essentially using two networks simultaneously.
skuddy said:
I completely understand what voice over LTE is and the fact that my phone uses CDMA for voice. My question was if my HTC one could use my LTE data and voice at the same time on the same network (even the same tower) why the heck can my n6 not do it? I'm actually disappointed with the lack of this functionality. I thought it was standard when sprint switched to LTE because it is essentially using two networks simultaneously.
Click to expand...
Click to collapse
It sounds like you didn't read the memo when it came to spark enabled devices,let me explain. Since sprint is using spark (or for tech people, 800mhz, 1900mhz and 2.5ghz) the newer phones that are spark enable (our nexus 6 being one of them) in order to take advantage of the HD voice upgrade and higher speed data, everything basically goes through one channel instead of two (basically all the older lte enabled phones). So before you had a dedicated channel for lte and a dedicated channel for voice. Now when a voice call is initiated, it's all going through the one channel for HD voice (trust me, when you hear it, you'll know it) instead of being broken up into two. Referring to what you said, it's not a lack of functionality, just the way the phones work now until, like the other posters said, volte is enabled on sprint, which hopefully will be happening this year.
Sent from my Nexus 6 using XDA Free mobile app
Excellent. I didn't know that happened on spark. I knew it was triband and the data speed shows it. I was getting true 24mbps download speeds on msdn subscriber downloads. Thank you for the thorough explanation. Aren't we all giant nerds on XDA?
SO now that the M8 and M9 both have wifi calling, has anyone found a way to port that over to our M7? Sprint service sucks inside my building. I am running a Sense 7 build from the M9 and it has a wifi calling toggle in the quick settings but the internal software isn't there to show the settings. Since wifi calling is essentially software, shouldn't we just be able to run some software to get native wifi calling. (yes yes I know google voice and hangouts dialer will let me do wifi calling but I want it built in through my own phone number)
No. When sprint updated the m7 to lollipop we were supposed to get Wi-Fi calling. At the last minute sprint backed out claiming that the m7 wasn't capable of Wi-Fi calling which is a bunch of bs cause t-mobile has it for the m7
So I was bored and wanted to play around and try to get this to work. So far I have been successful to get data text and mms working on 3G. Now I have noticed that when I boot the phone that it connects to LTE with a strong signal then it reconnects back to 3G its almost like its possible but something it blocking it. Has anyone had success getting further?
UPDATE: I have gotten FULL LTE on Verizon working. Currently trying to figure out a way to allow CDMA as well for calls
Ya good luck I had same issue as you . Talk text 3g working good. Or LTE only working .Never could figure out how to get them both going
Yea I know after hours of messing around lol and two sim cards wasn't satisfying enough I like the phone enough to jump off big red to try T-Mobile. I honestly like this phone better then my Pixel XL
I ditched my Verizon unlimited data plan for cricket unlimited and have no regrets. Best choice I ever made
joeyac02 said:
So I was bored and wanted to play around and try to get this to work. So far I have been successful to get data text and mms working on 3G. Now I have noticed that when I boot the phone that it connects to LTE with a strong signal then it reconnects back to 3G its almost like its possible but something it blocking it. Has anyone had success getting further?
Click to expand...
Click to collapse
Can you explain in detail exactly how you got this to work? I am dying to get this phone I had 1+1 when first realeased and left Verizon to get it, but now Im back on Verizon with my business phone and want this phone nothing else is close to this phone
bigtymeplayer85 said:
Can you explain in detail exactly how you got this to work? I am dying to get this phone I had 1+1 when first realeased and left Verizon to get it, but now Im back on Verizon with my business phone and want this phone nothing else is close to this phone
Click to expand...
Click to collapse
It won't work it's one or the other. You are wasting your time
The city I live In has Verizon's xlte network and if you upgrade to advanced Calling then voice calls and messages all use 4g LTE data instead of CDMA, so I would only need LTE data to work, I was able to get the 1+1 to get Verizon's signal but after 5 mins they noticed and intentionally blocked me off their Network a message popped up on the 1+1 saying I had been blocked
bigtymeplayer85 said:
The city I live In has Verizon's xlte network and if you upgrade to advanced Calling then voice calls and messages all use 4g LTE data instead of CDMA, so I would only need LTE data to work, I was able to get the 1+1 to get Verizon's signal but after 5 mins they noticed and intentionally blocked me off their Network a message popped up on the 1+1 saying I had been blocked
Click to expand...
Click to collapse
You have to add VoLTE on the phone AND with the carrier. you did both of these options, and t hen were blocked? Did you ever call and ask "why?"?
Thanks
joeyac02 said:
UPDATE: I have gotten FULL LTE on Verizon working. Currently trying to figure out a way to allow CDMA as well for calls
Click to expand...
Click to collapse
Just curious how you have "LTE" activated on the phone. I turned on "only LTE", but I get absolutely nothing. I am only interested in LTE on t he phone, I do not need to make voice calls of SMS
Force LTE provisioning
I know that people had the same issue on the ZTE axon 7 but we're able to force LTE provisioning by going into the dialer and dialing *#*#4636#*#*. This brings up a hidden test menu and under phone information there is a switch for LTE provisioning. It takes a few tries but eventually sticks on the axon. Can someone try this on the one plus phones to see if it works?
I know this has been rehashed many times, but I thought I'd share a my experiences of how to make the 3T usable on Verizon. Main reason I have the 3T is dual SIM and OEM bootloader unlock. Fantastic device. Switched from Verizon to AT&T just for the phone. The problem is my work uses Verizon. I refuse to carry two phones. So what I've done to solve this is bought the GravityBox app, which has a feature that allows, (among many things!) you to add a custom quick setting shortcut for Network Mode. It lets you decide which SIM the setting applies to, as well as any network modes to cycle through when pressing the shortcut. I of course pick the Verizon SIM. And only select two network modes: 1 CDMA only and 2 LTE only. CDMA only allows calls,text and 2G to work perfectly. When a sending or receiving a MMS on Verizon SIM, or needing to use Verizon LTE, I toggle to Verizon LTE only. This does kick AT&T offline for some reason, but beings that I rarely need to use Verizon data, it's not that big of deal.
I recently bought an Unlocked HTC M9 that was originally under AT&T network. While it makes calls and works fine, one thing I do have a problem with is Wi Fi calling. Since this is technically an AT&T phone I can't call on Wi-fi ( which is important because my apartment has no signal in it) with my T-Mobile sim card. I was wondering if there was a way I could download T Mobile software to make such calls, and if so how would I go about doing this.