Database Develop

[Q] Keyboard disappearing with the latest gapps

Hello,
I just installed the latest cyanogen rom (cm-10.1-20130113-NIGHTLY-p990.zip), everything was working fine. Then I installed the latest gapps (gapps-jb-20121212-signed.zip) to get gesture typing, which causes this problem: when I write in an empty input, if I press one letter or after the second word wrote with gesture typing, the keyboard disappears for 5 seconds, then everything works fine.
I did a factory reset, format /system and dalvik cache, but the problem is still here.
Someone has also this bug?

Dreamkey said:
Hello,
I just installed the latest cyanogen rom (cm-10.1-20130113-NIGHTLY-p990.zip), everything was working fine. Then I installed the latest gapps (gapps-jb-20121212-signed.zip) to get gesture typing, which causes this problem: when I write in an empty input, if I press one letter or after the second word wrote with gesture typing, the keyboard disappears for 5 seconds, then everything works fine.
I did a factory reset, format /system and dalvik cache, but the problem is still here.
Someone has also this bug?
Click to expand...
Click to collapse
It is a Rom's bug... Just download Swift Key
Sent from my Optimus 2X with Paranoid Android. Thanks button is here ↓ !!! Just use it

Gjot said:
It is a Rom's bug... Just download Swift Key
Sent from my Optimus 2X with Paranoid Android. Thanks button is here ↓ !!! Just use it
Click to expand...
Click to collapse
Ok, it was a while when you posted in this theme, but I have the same problem with Swift Key. I'm using Paranoid Android latest build.

Professor_Woland said:
Ok, it was a while when you posted in this theme, but I have the same problem with Swift Key. I'm using Paranoid Android latest build.
Click to expand...
Click to collapse
Does this have anything to do with the gapps? What gapps are you using? I think the right ones for Paranoid Android are gapps-jb-20121011. But I think that SwiftKey should work anyway. Is everything ok in "Language & input" in the settings?

filarod said:
Does this have anything to do with the gapps? What gapps are you using? I think the right ones for Paranoid Android are gapps-jb-20121011. But I think that SwiftKey should work anyway. Is everything ok in "Language & input" in the settings?
Click to expand...
Click to collapse
I used to use those, but now I tried Aroma Multipack by tantrums after full wipe and it's still the same... In Language & input I see only Swift Key and I can only go to Swift Key settings from there.

Professor_Woland said:
I used to use those, but now I tried Aroma Multipack by tantrums after full wipe and it's still the same... In Language & input I see only Swift Key and I can only go to Swift Key settings from there.
Click to expand...
Click to collapse
"Instructions:
Coming from another ROM:
Make sure everything is set up properly (correct CWM for your bootloader etc.)
No need for a full wipe you're coming either from a official CM10 old bl or from a CM10 new bl ROM.
Any other ROM: Do a full wipe! Apperantly even needed if you come from CM10.1.
Just do the wipe, you will be thankful afterwards when everything does run better.
Format /system
Choose the correct ROM for your bootloader
Flash ROM + Gapps
Flash the latest kowalski kernel!
Reboot
Don't restore system apps (like Settings) or system data (like Wifi data) with TitaniumBackup!
You'll find a new Settings entry "Paranoid Settings" - to get a first impression of PA choose "Launch" and then "tonyp's profile".
If you want to use adb in recovery, here are my modded adb drivers for ICS.
Updating from a previous version:
Backup your PA Settings (at Settings - Paranoid Settings - Tools)
Download new build
Flash ROM (you don't need to do a full wipe - or any other wipes)
Flash the latest kowalski kernel!
Reboot
done"
You did everything as tonyp said??

filarod said:
"Instructions:
Coming from another ROM:
Make sure everything is set up properly (correct CWM for your bootloader etc.)
No need for a full wipe you're coming either from a official CM10 old bl or from a CM10 new bl ROM.
Any other ROM: Do a full wipe! Apperantly even needed if you come from CM10.1.
Just do the wipe, you will be thankful afterwards when everything does run better.
Format /system
Choose the correct ROM for your bootloader
Flash ROM + Gapps
Flash the latest kowalski kernel!
Reboot
Don't restore system apps (like Settings) or system data (like Wifi data) with TitaniumBackup!
You'll find a new Settings entry "Paranoid Settings" - to get a first impression of PA choose "Launch" and then "tonyp's profile".
If you want to use adb in recovery, here are my modded adb drivers for ICS.
Updating from a previous version:
Backup your PA Settings (at Settings - Paranoid Settings - Tools)
Download new build
Flash ROM (you don't need to do a full wipe - or any other wipes)
Flash the latest kowalski kernel!
Reboot
done"
You did everything as tonyp said??
Click to expand...
Click to collapse
I did, I'm on PA for a while now, but when I saw that crashing I did a full wipe and still nothing.
EDIT: I went from old bootloader to new and for now everything looks fine.

N-7000 always messes up after flashing rom

Hi Guys!
Okay, so I have a problem here. Everytime, I try to flash a rom onto my Galaxy Note, it either gets stuck in a bootloop or most functions don't work (quick functions, WiFi, home button etc.) This is starting to get pretty annoying as I hate stock android and love CyanogenMod. I even tried the new CyanogenMod quick install using the computer client and android app.
I'm not sure if you need to know this but I am running CyanogenMod 10.2 (not fully functioning as problems above occur).
Andoird Version:- 4.3.1
Baseband Version:- N7000XXLT3
Kernel Version:- 3.0.64-CM-gd6f2f4a
Build Number:- cm_n7000-uderdebug 4.3.1 JLS361 28760a496f dev-keys
How do I fix this guys? Really need a solution!
Thanks in advance,
Rohan

sometimes repeated hard reboot (5-6 times) helps till ROM is properly setup.

ashutoshgoyal said:
sometimes repeated hard reboot (5-6 times) helps till ROM is properly setup.
Click to expand...
Click to collapse
Cheers man i'll try this and get back to you

Between each flash of a new ROM you should perform a full wipe before flashing in recovery:
in mounts and storage:
-format /system
-format /preload
-format /data
also you can format cache and dalvik cache(in advanced I believe).
-flash zip (or stock ROM with odin)
-flash gapps if needed
If you don't do those wipes then you will have many bugs, performance issues, battery issues, bootloops, random reboots etc.

[Q] SGT7 OmniRom 4.4.2 official nightly SystemUI has stopped working

Good day. New member here but long time lurker, can't post on official android development yet.
I've been able to flash terenceng's cm11 on my p1000 with no problems. Today I just saw the official Omnirom nightly builds and I wanted to try them out. http://forum.xda-developers.com/showthread.php?t=2634278
When I flashed the rom, on bootup a popup shows up with "unfortunately systemui has stopped working". I can't even use the rom as the status bar is always crashing. For now I reverted to cm11.
Is this just a bug on the nightly build? or did I do something wrong?
Steps done: wipe data, factory reset, wipe cache, dalvik cache, flash, reboot.

did you try to format /system as well? Actually you should be doing that each time you flash a ROM.

yup i also wiped system and android secure..

[Q] [Help] Flashing CM11 - M9 on S3(I9300), CM stock camera is missing.

I have flashed CM11 - M9 on my Samsung Galaxy S3 (I9300) freshly, doing factory reset and wiping all the data, then flashed PA Gapps Full Modular version. After booting the phone, was getting a prompt "Google Keyboard has stopped", there after was unable to get the keyboard option at all, during setting up the phone and CM account. Again, wiped, factory reset, clear cache and freshly flashed the CM11 - M9 without flashing PA Gapps this time. Booted the phone, got the setting done, noticed that Gapps are already installed in the phone. And CM stock Camera is missing
I have been using CM 11 since a long time, but issue arrived when I flashed Gapps 4.4.3 (Google Stock) to get the latest Google Play , but my CM camera has been replaced with Google Camera which sucks, thereby I have decided to reflashed my phone with CM11 - M9. Now the Stock CM Camera is missing.
Installed CynogenMod Version: 11-20140804-SNAPSHOT-M9-i9300
Someone, please suggest, how to fix this issue?? How to flash a fresh CM11 along with Gapps, which doesn't replace CM stock camera??

[Solved] [Q] problem with Cyanogenmod 12.1 [UNIFIED]

I unlocked my device (moto g2 dual sim xt1068) , rooted , installed TeamWin Recovery , made a backup of stock and wiped everything (cache, dalvik, system, data, internal storage)
Then flashed
[TITAN][5.1.1] Cyanogenmod 12.1 [UNIFIED]
http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-12-t2993932
& Gapps
It booted but all I got was " Unfortunately, System UI has stopped "
I went back to stock and tried again and again with Gapps , without Gapps , with everything wiped and without wiping any thing
What should I do to use this ROM ?

Notice :-
I tried that with Nightly builds 20150513 and 20150514

have you try the rom without gapps?
if works you have a gapp problem.
try others rom and or gapp combinations.
i use this and is flawless.
http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
http://forum.xda-developers.com/moto-g-2014/development/rom-blisspop-v3-0-t3079125
:good:

EAEN said:
I unlocked my device (moto g2 dual sim xt1068) , rooted , installed TeamWin Recovery , made a backup of stock and wiped everything (cache, dalvik, system, data, internal storage)
Then flashed
[TITAN][5.1.1] Cyanogenmod 12.1 [UNIFIED]
http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-12-t2993932
& Gapps
It booted but all I got was " Unfortunately, System UI has stopped "
I went back to stock and tried again and again with Gapps , without Gapps , with everything wiped and without wiping any thing
What should I do to use this ROM ?
Click to expand...
Click to collapse
Your problem is most probably because of gapps . Use different gapps I have never got such problem. I use minimal gapps .! best of luck!:good:

I tried installing without Gapps..... And tired installing with Gapps
Both gives systemUI FC
.
.
I TRIED DIFFERENT Rom (TeamUB) AND it works perfectly
Maybe this problem with cm12.1 is because I use dual sim version of moto G2 or it supports dual sim?

EAEN said:
I unlocked my device (moto g2 dual sim xt1068) , rooted , installed TeamWin Recovery , made a backup of stock and wiped everything (cache, dalvik, system, data, internal storage)
Then flashed
[TITAN][5.1.1] Cyanogenmod 12.1 [UNIFIED]
http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-12-t2993932
& Gapps
It booted but all I got was " Unfortunately, System UI has stopped "
I went back to stock and tried again and again with Gapps , without Gapps , with everything wiped and without wiping any thing
What should I do to use this ROM ?
Click to expand...
Click to collapse
I had this problem too. Flash a different CM build. There was a bad build that made this problem. I believe it was the May 16th one. (I may be wrong)

EAEN said:
I tried installing without Gapps..... And tired installing with Gapps
Both gives systemUI FC
.
.
I TRIED DIFFERENT Rom (TeamUB) AND it works perfectly
Maybe this problem with cm12.1 is because I use dual sim version of moto G2 or it supports dual sim?
Click to expand...
Click to collapse
It works perfectly with the XT 1068, you must download the latest cm build, because are better than the previous ones.

the problem was solved after flashing the latest build
Thanks everyone