So like a moron I installed ViperRom 5.0 with regular old CWM. Now as a result I'm stuck at the bootloader with no access to recovery.
I have no idea what to do now. PLEASE HELP!!!!
S-ON
Hboot 1.55.0000
Can you not boot into recovery from the boot loader or reboot and hold the volume down button?
Sent from my HTC One Max using Tapatalk!
gimmeitorilltell said:
Can you not boot into recovery from the boot loader or reboot and hold the volume down button?
Sent from my HTC One Max using Tapatalk!
Click to expand...
Click to collapse
I only have access to my bootloader......can't get into recovery or boot into the rom.
My terminal window keeps hanging on "waiting for device" so I don't think USB Debugging was enabled.....
The only thing that is looking bright is that my computer is recognizing my phone in Fastboot.
I'm completely clueless on what to do now.....
Please anyone help
Maybe try flashing recovery again?
Sent from my HTC One Max using Tapatalk!
Does it say fastbootusb? If not press the power button to select fastboot.
BD619 said:
Does it say fastbootusb? If not press the power button to select fastboot.
Click to expand...
Click to collapse
I can get to fastboot USB but from there I'm honestly lost...
nickhernandez said:
I can get to fastboot USB but from there I'm honestly lost...
Click to expand...
Click to collapse
I can help you remotely PM if interested
i'm in the same boat, but when I go to flash another recovery in fastboot my phone freezes after it fails to flash.
sending 'recovery' (9786 KB)...
FAILED (data transfer failure (Unknown error))
finished. total time: 0.016s
Then my phone freezes and I have to reboot into bootloader.
Never mind solved it.
Morghan said:
i'm in the same boat, but when I go to flash another recovery in fastboot my phone freezes after it fails to flash.
sending 'recovery' (9786 KB)...
FAILED (data transfer failure (Unknown error))
finished. total time: 0.016s
Then my phone freezes and I have to reboot into bootloader.
Click to expand...
Click to collapse
I had to run RUU to fix mine
Hello, everyone.
So, about an week ago, I posted a thread to ask for your help regarding my broken N6. Since then, nothing has changed(but got worse, I guess...?). Here is what is happening with my N6 right now.
1) It powers up(thank god) but goes straight to the boot-loader screen(I believe this means that my device doesn't have system image file within the device)
2) On boot-loader menu(Start, Restart bootloader, Recovery mode, Power off, Factory, Barcodes, BP Tools, QCOM, Bootlaoder logs), only few are working(Restart bootlodaer, Power off, Barcodes). When I try to perform other than these, it just goes back to main boot-loader screen.
3) I tried to use both Nexus Root Tool kit and manual installation of each image but doesn't work for both of them(From this, I believe that my phone is just BROKEN)
With this happening, conclusion that I can think of is
1) There is no 'Recovery' available in my device(that's why I can't do anything to recover my device)
2) ADB is not functioning.
Only solution that I can think of from this point is that contact Motorola and replace my device(which is what I am currently doing but Motorola has huge problem with their customer service that I am waiting for their answer for about 2 weeks now)
If possible, would there other options that I can repair this device by myself?
I appreciate your attention.
Sincerely.
Adb has no impact on bootloader. What do you mean doesn't work when you fastboot the factory image?
Sent from my Nexus 6 using XDA Free mobile app
your problem is the use of toolkits. stay away from them, unless you know what you are doing!
your phone doesnt have any rom on it. you can.. 1. flash the factory img via fastboot, like you are supposed to do(not via a toolkit), or 2. unlock the bootloader, flash a custom recovery then while in the custom recovery adb push a rom, gapps, and supersu and flash them that way. what you did does not give you the right for a trade in.
The two previous posters are correct. You just need to fastboot flash the factory rom and factory recovery. It is fairly simple, if you take the time to read how to do it. There are posts all over XDA for beginners on how to do this. And I cannot stress how correct @simms22 is. Toolkits may seem to make things easy, but when there is a problem, you need to know how to manually fix it. I just personally stay away from toolkits. And I was in your shoes. I didn't know jack about flashing roms and such. Just reading XDA got me to where I am. (and i am still learning!)
Like the others have pointed out, you are fine. You have access to your bootloader screen, this is a Nexus. Take a deep breath. Take some time and read this site about flashing a factory image. Please do it the best way - manually with fastboot commands. If you get stuck come back here and someone will help. It really is easy. Please repeat after me "I will avoid all toolkits from now one".
Start with this and read lots.
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Flashing the factory image should still work from boot loader with fast boot.
Follow the second link for manual flashing after downloading the zip from the first link.
https://developers.google.com/android/nexus/images
If you run into the missing system.img problem here is the link to fix it:
http://www.androidpolice.com/2014/11/12/running-into-the-dreaded-missing-system-img-error-flashing-android-5-0-factory-images-heres-how-to-get-around-it/
This way you can start from the beginning.
Problem with flashing factory image manually.
First, thanks everyone for helping me by providing useful information but there is a problem when I flash factory image manually.
Whenever I try to flash image(for example, 'boot.img', or other images, I always get the same error 'FAILED <remote failure>' and not installed on my device. From here, I have no idea what to do.
chg911225 said:
First, thanks everyone for helping me by providing useful information but there is a problem when I flash factory image manually.
Whenever I try to flash image(for example, 'boot.img', or other images, I always get the same error 'FAILED <remote failure>' and not installed on my device. From here, I have no idea what to do.
Click to expand...
Click to collapse
first off, does fastboot see your device?? you can check by typing.. fastboot devices
if it doesnt see your device, do you have the driver instslled?
simms22 said:
first off, does fastboot see your device?? you can check by typing.. fastboot devices
if it doesnt see your device, do you have the driver instslled?
Click to expand...
Click to collapse
fastboot detects my device. but when I tried to TWRP recovery, it shows following error.
sending 'recovery' <11668 KB>...
OKAY [ 0.375s]
writing 'recovery'...
<bootloader> Failed to erase partition
<bootloader> Failed to flash partition recovery
FAILED <remote failure>
finished. total. time: 6.133s
chg911225 said:
fastboot detects my device. but when I tried to TWRP recovery, it shows following error.
sending 'recovery' <11668 KB>...
OKAY [ 0.375s]
writing 'recovery'...
<bootloader> Failed to erase partition
<bootloader> Failed to flash partition recovery
FAILED <remote failure>
finished. total. time: 6.133s
Click to expand...
Click to collapse
look for the command to erase the recovery partition. youll have to google it as i dont know(or remember) it. i dont even own a computer :angel:
then youll have to reflash the recovery.
simms22 said:
look for the command to erase the recovery partition. youll have to google it as i dont know(or remember) it. i dont even own a computer :angel:
then youll have to reflash the recovery.
Click to expand...
Click to collapse
found the command "fastboot erase recovery" but not working with following error message.
fastboot erase recovery
erasing 'recovery'
<bootloader> Erase allowed in unlocked state
<bootloader> Failed to erase partition
FAILED <remote failure>
finished. total time: 5.763s
*my phone is unlocked for sure(I checked 'fastboot oem unlock' and it said
fastboot oem unlock
...
<bootloader> Device already unlocked!
FAILED<remote failure>
finished. total time: 0.003s
chg911225 said:
found the command "fastboot erase recovery" but not working with following error message.
fastboot erase recovery
erasing 'recovery'
<bootloader> Erase allowed in unlocked state
<bootloader> Failed to erase partition
FAILED <remote failure>
finished. total time: 5.763s
*my phone is unlocked for sure(I checked 'fastboot oem unlock' and it said
fastboot oem unlock
...
<bootloader> Device already unlocked!
FAILED<remote failure>
finished. total time: 0.003s
Click to expand...
Click to collapse
i have no idea, but this is a good thread to read and post questions about fastboot in http://forum.xda-developers.com/nexus-6/general/noob-read-adb-fastboot-how-help-t3006500
RIP. What did you do to your N6?
OP how did you install your fastboot. I would assume you did it from within a toolkit. That is probably your problem. If that is the case, please do this. Go here and install the .exe: http://developer.android.com/sdk/index.html#Other
It's big I know it but just do it please.
Make sure everything (SDK) gets installed in a folder path like c:\android or something you will easily remember. This is very important because it is within this folder you will place the extracted factory image files (.img). Place all full unzipped .img files in this folder.
Please follow method #2 in this excellent guide:
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
zetsumeikuro said:
RIP. What did you do to your N6?
Click to expand...
Click to collapse
One day it just shut down by itself and since then it's like this. I just contact Motorola and they are going to ship me new device with different color(idk y they are still having problem with their stocking their devices in because what I had was Cloud White 32Gb but only model that were present when I contact them was Midnight blue with 32Gb, other options are all out of stock. really wished they had a white color...)
This phone is a damn Nexus, it can't die. It's user error.
Sent from my Nexus 6
Hi,
i need help with this strange problem, i want update my phone to android 6.0 but when i start local update phone reboot and freeze on Honor logo, when i try factory reset or reboot to stock recovery menu - its same, again only Honor logo. Bootloader work ok, its unlocked, phone rooted, but when i for example try flash twrp recovery - fastboot send me "Failed...command not allowed"...Cant access recovery menu by fastboot, any app in phone and by keys combination too..also vol up, vol down and power for update from sd card not work, trying to seek for solutions to more than 2 weeks, can anybody here help me please?Thx.
If you are sure bootloader is unlocked and using Linux OS, run fastboot commands as root/admin (as sudo).
oppili said:
If you are sure bootloader is unlocked and using Linux OS, run fastboot commands as root/admin (as sudo).
Click to expand...
Click to collapse
Yes, im sure. On bootloader mode is in red color - Phone unlocked, but i not using Linux, im on Windows 7 and this not help me....
Try fastboot oem unlock - command again.
If still not works, try fastboot erase of that *.img file before flashing that new img file.
oppili said:
Try fastboot oem unlock - command again.
When i try this command...
c:\Minimal ADB and Fastboot>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.004s]
finished. total time: 0.006s
If still not works, try fastboot erase of that *.img file before flashing that new img file.
Click to expand...
Click to collapse
I know about this but im above when i try erase all after this fastboot send me "Failed..." and i will be have dead phone, tell me - when i try erase command for all partitions - will be phone work wit fastboot after this??
THX
Are you the only user in pc ? Do you have admin rights ?
or
try any other pc
or
use Ubuntu OS
Lulu_568 said:
Hi,
i need help with this strange problem, i want update my phone to android 6.0 but when i start local update phone reboot and freeze on Honor logo, when i try factory reset or reboot to stock recovery menu - its same, again only Honor logo. Bootloader work ok, its unlocked, phone rooted, but when i for example try flash twrp recovery - fastboot send me "Failed...command not allowed"...Cant access recovery menu by fastboot, any app in phone and by keys combination too..also vol up, vol down and power for update from sd card not work, trying to seek for solutions to more than 2 weeks, can anybody here help me please?Thx.
Click to expand...
Click to collapse
the reason for this case, that you should not apply updates while you are rooted.
(assuming that you are in lollipop stock )I suggest you check for the driver .. try to run adb (when your phone is in the active state, not powered off)
now, reboot to bootloader and try any other fastboot commands, like fastboot reboot (just to check that fastboot is responding to the device drivers..)
if it does respond, then I'm afraid you have a serious problem, if it doesn't respond, then you have to deal with the drivers, or you have to double check if your phone is unlocked
thilak devraj said:
the reason for this case, that you should not apply updates while you are rooted.
(assuming that you are in lollipop stock )I suggest you check for the driver .. try to run adb (when your phone is in the active state, not powered off)
now, reboot to bootloader and try any other fastboot commands, like fastboot reboot (just to check that fastboot is responding to the device drivers..)
if it does respond, then I'm afraid you have a serious problem, if it doesn't respond, then you have to deal with the drivers, or you have to double check if your phone is unlocked
Click to expand...
Click to collapse
Yes, i allready try, commands like fastboot reboot, or devices - its work, but when i try fastboot flash .... or erase cache - Command not allowed, when fastboot oem unlock - data parse fail...fastboot just respond but i cannot write or erase flash - dont know why....
Lulu_568 said:
Yes, i allready try, commands like fastboot reboot, or devices - its work, but when i try fastboot flash .... or erase cache - Command not allowed, when fastboot oem unlock - data parse fail...fastboot just respond but i cannot write or erase flash - dont know why....
Click to expand...
Click to collapse
then you should take it to the service center. the only best thing you can do now..
Lulu_568 said:
Yes, i allready try, commands like fastboot reboot, or devices - its work, but when i try fastboot flash .... or erase cache - Command not allowed, when fastboot oem unlock - data parse fail...fastboot just respond but i cannot write or erase flash - dont know why....
Click to expand...
Click to collapse
erase cache command is blocked by huawei in fastboot irrespective of locked or unlocked state. somewhere i read unlock lost permissions after update. if you have not tried unlock after update try it. driver can also be an issue, install hisuite it comes with drivers.
Lulu_568 said:
Hi,
i need help with this strange problem, i want update my phone to android 6.0 but when i start local update phone reboot and freeze on Honor logo, when i try factory reset or reboot to stock recovery menu - its same, again only Honor logo. Bootloader work ok, its unlocked, phone rooted, but when i for example try flash twrp recovery - fastboot send me "Failed...command not allowed"...Cant access recovery menu by fastboot, any app in phone and by keys combination too..also vol up, vol down and power for update from sd card not work, trying to seek for solutions to more than 2 weeks, can anybody here help me please?Thx.
Click to expand...
Click to collapse
Try this once,
copy firmware in folder 'dload' in sdcard root.
press vol up + vol down + power for 20 secs then release power but keep pressing vol up and vol down
shady143 said:
Try this once,
copy firmware in folder 'dload' in sdcard root.
press vol up + vol down + power for 20 secs then release power but keep pressing vol up and vol down
Click to expand...
Click to collapse
This not work, when i try this - phone freeze on Honor logo, same as on factory reset or when i try go to Recovery menu...
I check 100 times that is bootloader unlocked, can be problem in bad root or...?
Lulu_568 said:
This not work, when i try this - phone freeze on Honor logo, same as on factory reset or when i try go to Recovery menu...
I check 100 times that is bootloader unlocked, can be problem in bad root or...?
Click to expand...
Click to collapse
okay. are you sure the bootloader is unlocked? no harm done. just hold vol down + power up. and you get that green android with white background and the text in RED that says UNLOCKED. if its LOCKED, get the UNLOCK CODE first. just a reminder, you can only fastboot flash those *.imgs if you are UNLOCKED. and there are only some files will be flashed properly (recovery.img, recovery2.img, boot.img, you can try). yes, you can use Huawei Update Extractor to get those files, even in Marshmellow files. but for reviving the phone, use B067 Kitkat or any Kitkat you can get from Huawei Downloads.
1. Get into bootloader mode. I guess you already know how to do that. Plug the phone to wall charger. Yes, leave it charged with white screen showing. Leave it until you finished preparing the PC.
2. Make sure you can use fastboot. You can use Minimal ADB and Fastboot.exe found somewhere in XDA. And make sure that it can detect the phone when you write fastboot devices. It will show up if set up properly.
3. Huawei Update Extractor + Any Kitkat firmware. Extract everything. Note the tags beside each .img inside that Update Extractor. Youre gonna need those tags in order to flash properly.
4. Copy all those *.imgs that extracted into Minimal ADB and Fastboot folder. Check program files (x86).
5. Now ready the pc by launching that minimal adb and fastboot.exe as admin. THIS IS IMPORTANT!
6. fastboot devices. pull the phone from wall charger. plug it to pc. listen to usb connecting sound and driver installation. hit enter and the device should show up.
7. This is where its getting interesting. remember the tags? use that tags like this.
RECOVERY.img = fastboot flash RECOVERY RECOVERY.img
BOOT.img = fastboot flash BOOT BOOT.img
CHECK THE TAGS BEFORE FLASHING!!! and yes, just 5 or less files will be flashed successfully. Ignore it. fastboot reboot it. Yes, its stuck, plug it to the wall again while we prepare the microsd.
8. update.app file. Put that update.app file inside /microsd/dload/update.app folder. Put the microsd inside the phone. Yes, its stuck.
9. Now do the force update. when you see the emui logo, immediately plug it back to wall charger. wait until 100% and it rebooted itself, and you can see the language selection screen again.
DO WITH YOUR OWN RISK. Ive already done it, I hope it worked for you too.
zzztidurvirus said:
okay. are you sure the bootloader is unlocked? no harm done. just hold vol down + power up. and you get that green android with white background and the text in RED that says UNLOCKED. if its LOCKED, get the UNLOCK CODE first. just a reminder, you can only fastboot flash those *.imgs if you are UNLOCKED. and there are only some files will be flashed properly (recovery.img, recovery2.img, boot.img, you can try). yes, you can use Huawei Update Extractor to get those files, even in Marshmellow files. but for reviving the phone, use B067 Kitkat or any Kitkat you can get from Huawei Downloads.
1. Get into bootloader mode. I guess you already know how to do that. Plug the phone to wall charger. Yes, leave it charged with white screen showing. Leave it until you finished preparing the PC.
2. Make sure you can use fastboot. You can use Minimal ADB and Fastboot.exe found somewhere in XDA. And make sure that it can detect the phone when you write fastboot devices. It will show up if set up properly.
3. Huawei Update Extractor + Any Kitkat firmware. Extract everything. Note the tags beside each .img inside that Update Extractor. Youre gonna need those tags in order to flash properly.
4. Copy all those *.imgs that extracted into Minimal ADB and Fastboot folder. Check program files (x86).
5. Now ready the pc by launching that minimal adb and fastboot.exe as admin. THIS IS IMPORTANT!
6. fastboot devices. pull the phone from wall charger. plug it to pc. listen to usb connecting sound and driver installation. hit enter and the device should show up.
7. This is where its getting interesting. remember the tags? use that tags like this.
RECOVERY.img = fastboot flash RECOVERY RECOVERY.img
BOOT.img = fastboot flash BOOT BOOT.img
CHECK THE TAGS BEFORE FLASHING!!! and yes, just 5 or less files will be flashed successfully. Ignore it. fastboot reboot it. Yes, its stuck, plug it to the wall again while we prepare the microsd.
8. update.app file. Put that update.app file inside /microsd/dload/update.app folder. Put the microsd inside the phone. Yes, its stuck.
9. Now do the force update. when you see the emui logo, immediately plug it back to wall charger. wait until 100% and it rebooted itself, and you can see the language selection screen again.
DO WITH YOUR OWN RISK. Ive already done it, I hope it worked for you too.
Click to expand...
Click to collapse
First...many thanks for your interest!
Look, about bootloader, on boot mode is in red PHONE UNLOCKED, i try this command in fastboot:
C:\Minimal ADB and Fastboot>adb reboot bootloader
C:\Minimal ADB and Fastboot>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Minimal ADB and Fastboot>fastboot oem backdoor info
...
(bootloader) FB LockState: LOCKED
(bootloader) USER LockState: UNLOCKED
OKAY [ -0.000s]
finished. total time: -0.000s
so what is FB Lockstate??Is my bootloader unlocked or locked??
Here is another command which i try....
C:\Minimal ADB and Fastboot>fastboot -w
wiping userdata...
Erase successful, but not automatically formatting.
Can't determine partition type.
FAILED (remote: Command not allowed)
erasing 'userdata'...
FAILED (remote: Command not allowed)
finished. total time: 0.000s
Cant derermine partition type - is this problem?
I also try this....
C:\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 524288000 bytes
sending 'recovery' (25034 KB)...
OKAY [ 0.783s]
writing 'recovery'...
OKAY [ 1.033s]
finished. total time: 1.831s
C:\Minimal ADB and Fastboot>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.801s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.801s
It seems that fastboot write recovery (with your help i need use admin rights now this work) but i still cant boot to recovery no matter how...
I can also flash and backup boot and recovery via Flashify or Rashr and when i open backup with HEX editor it seems that i succesfully upload TWRP but still cannot acess TWRP recovery....
This is all what i try in this time, of course i read your help words about Huawei extractor etc. but not try at this time, i hope i explain more detailed my problem. Look im not a newbie, i allready flash etc. my Lenovo and P9 lite what i have here but not understand where can be problem in this Honor 4x, it seems like corrupted recovery partition or can be problem in read only/write partition - i play with this option before....
anyway - run as admin - this help me a lot i think, THX and wait your answer.
EDIT: one thing, you think that when i try flash stock recovery (i can, no problem of course) it will be work?
Update: Big success, i just try flash stock recovery B064b and now im in stock recovery menu, im surprised but what now? I want update to Marshmallow 6.0....?
But in stock recovery is: phone and the data cannot be recovered. Continue?
Oh sorry, this is about "not sd card inserted" problem
What will now progress? I have inside B130 firmware and want Marshmallow, also TWRP recovery must i flash now especially for B130 firmware for work?
Update: Yes, all working now, factory reset, recovery etc. you help me a lot, only if you can tell me what number of firmware must i upload for Marshmallow, thx
Last update: So finally, coz im too hurry and dont want wait for your answer :angel:, i just upload from local update first Android 5.1.1. after this 6.0 and all is perfect and working!
My big thanks and kisses goes to you zzztidurvirus, im lucky and still cant beleive that all works, again thx!!
I did once on Win to revert back to Stock from CM12.1 by using img from update.app file. For my case, it's the MM update.app not working, I couldn't flash img files into phone, then I tried to flash files from LP, it worked. I boot into LP ROM and update from there to MM.
Hey hey people.
I was trying to upgrade my friend's Honor X4 Che2-L11 variant to 6.0 age from it's lollipop and ****ed up - big time. It seems to have a recovery, and it bootloops. I can't get it to install any update.app though, it either errors or gets stuck/crashes at 5%.
Now I am trying to flash a individual stock recovery with fastboot. Like the guide by zzztidurvirus there, but whenever I try to issue flash command this is what I get:
target reported max download size of 471859200 bytes
sending 'RECOVERY' (9304 KB)...
OKAY [ 0.258s]
writing 'RECOVERY'...
FAILED (remote: Command not allowed)
finished. total time: 0.261s
- so basically any flash command sends OKAY, Writing Fails with Command not allowed. Bootloader is unlocked, "PHONE unlocked" on screen and same status messages from fastboot as Lulu up there when making queries.
What gives, what could I try still?
Lulu_568 said:
This not work, when i try this - phone freeze on Honor logo, same as on factory reset or when i try go to Recovery menu...
I check 100 times that is bootloader unlocked, can be problem in bad root or...?
Click to expand...
Click to collapse
I had faced same issue but get back by using the that method.
Sumea said:
Hey hey people.
I was trying to upgrade my friend's Honor X4 Che2-L11 variant to 6.0 age from it's lollipop and ****ed up - big time. It seems to have a recovery, and it bootloops. I can't get it to install any update.app though, it either errors or gets stuck/crashes at 5%.
Now I am trying to flash a individual stock recovery with fastboot. Like the guide by zzztidurvirus there, but whenever I try to issue flash command this is what I get:
target reported max download size of 471859200 bytes
sending 'RECOVERY' (9304 KB)...
OKAY [ 0.258s]
writing 'RECOVERY'...
FAILED (remote: Command not allowed)
finished. total time: 0.261s
- so basically any flash command sends OKAY, Writing Fails with Command not allowed. Bootloader is unlocked, "PHONE unlocked" on screen and same status messages from fastboot as Lulu up there when making queries.
What gives, what could I try still?
Click to expand...
Click to collapse
In this case help me i think run adb/fastboot as a admin and i use stock recovery .img from Huawei extractor when i got first success with writing as i remember, hope this help you...
Lulu_568 said:
In this case help me i think run adb/fastboot as a admin and i use stock recovery .img from Huawei extractor when i got first success with writing as i remember, hope this help you...
Click to expand...
Click to collapse
Sadly not, as I tried both running ADB fastboot as admin from administrator command line and I tried three different recovery images from huawei, 6.0 (because the flash went bad during attempt to flash a 4.1EMUI with 6.0 B506 ROM for CHE2-L11) - And it keeps denying the write attempt with the same message. More info on the flash: I tried to TWRP flash from 5.1 rom to the EMUI4.1 6.0 ROM following guide someone made with updateappflasher.zip or something, during the flash the phone just crashed 60% in the bar and after that the phone is boot looping into recovery but it can't do anything. Like said any attempt to flash a stock rom even if a recovery seems to exist when booting VOL+ & POWER at the same time, but it will fail if attempting to do wipe data/factory reset in 40% mark. Forced updater can also be accessed but again, thanks to the firmware situation the phone is in it does not flash anything beyond 5% without crashing and being stuck or just giving an error message outright.
Only thing I might have not have is the right kind of ADB drivers but googling about CHE2-L11 I really cannot find a ADB drivers for this phone for life of me and dealing with windows 10 these days makes it worse. At least it used to be that I was with windows 7, back when I myself unlocked the bootloader of the phone and rooted it myself, I have some memory of that being harsh to deal with too, as I had hard time getting drivers that worked right with the phone etc.
I will check into this... At this point my friend bought a new phone already but I still will try to fix the phone for him since I feel personally pretty bad for pretty big mess I made.
I will also try this with a windows XP machine I have still, it is meant entirely for different things but at times like these it is somewhat nice to have a XP around. At least the darn driver problems are not a problem.
UPDATES:
I unbricked the phone. The stock recovery was intact enough for just a normal dload install of a update.app from huawei - why it did not initially work was probably the USB connection to computer and/or 64gig microSD card my friend had, not being compatible with Huawei's recovery updater. I myself had a 8gig card around which worked and I restored the phone ultimately to a 6.0 official ROM. I also went ahead to root it - and final find really was that the reason why recovery etc. would not flash, was because I wrote "fastboot flash RECOVERY twrp.img" - instead of "fastboot flash recovery twrp.img" - the latter works, and the all caps for "RECOVERY" results in illegal command error - and it was no bigger than that.
Meanwhile even after sorting this all out my friend already ended up buying a new phone so it hurts but I hope some other people find some info here useful.
Hello guys. Thanks for tacking a look at this thread.
I have a P8Lite ALE-L21 that some time ago I seat my ass on it and screen broke and even bend a bit the frame. I have lots of pictures from a trip that I´m desperate thinking that maybe I will lose them.
First of all I brought a new frame with new screen. Replace the good looking board to new frame. Tried to turn on the phone and starts to loop trying to boot but never boots. I have read that this is an usual issue with this phones.
Now I´m stuck at the fastboot & rescue mode not knowing what to do next.
Is it possible to restore the phone to factory settings and after that try to recover the pictures? If it´s possible to restore it can someone give me some instruction on how to do it?
I will apriciate all the help from you guys.
Thanks
tcolaco said:
Hello guys. Thanks for tacking a look at this thread.
I have a P8Lite ALE-L21 that some time ago I seat my ass on it and screen broke and even bend a bit the frame. I have lots of pictures from a trip that I´m desperate thinking that maybe I will lose them.
First of all I brought a new frame with new screen. Replace the good looking board to new frame. Tried to turn on the phone and starts to loop trying to boot but never boots. I have read that this is an usual issue with this phones.
Now I´m stuck at the fastboot & rescue mode not knowing what to do next.
Is it possible to restore the phone to factory settings and after that try to recover the pictures? If it´s possible to restore it can someone give me some instruction on how to do it?
I will apriciate all the help from you guys.
Thanks
Click to expand...
Click to collapse
Hmm, if you have twrp dirty flash personas mod. If you don't, try t flash twrp, and after flash the mod. That won't delete your files, only make your phone to boot. Hopefully you had Android 6 already.
tcolaco said:
Hello guys. Thanks for tacking a look at this thread.
I have a P8Lite ALE-L21 that some time ago I seat my ass on it and screen broke and even bend a bit the frame. I have lots of pictures from a trip that I´m desperate thinking that maybe I will lose them.
First of all I brought a new frame with new screen. Replace the good looking board to new frame. Tried to turn on the phone and starts to loop trying to boot but never boots. I have read that this is an usual issue with this phones.
Now I´m stuck at the fastboot & rescue mode not knowing what to do next.
Is it possible to restore the phone to factory settings and after that try to recover the pictures? If it´s possible to restore it can someone give me some instruction on how to do it?
I will apriciate all the help from you guys.
Thanks
Click to expand...
Click to collapse
flash twrp, if your internal storage isnt encrypted then put a microsd card into your phone and copy your data.
Sent from my LG-K220 using XDA Labs
D1stRU3T0R said:
Hmm, if you have twrp dirty flash personas mod. If you don't, try t flash twrp, and after flash the mod. That won't delete your files, only make your phone to boot. Hopefully you had Android 6 already.
Click to expand...
Click to collapse
In the fastboot & rescue mode it the bottom it says in green "PHONE Locked". This might be a problem to flash ?
I run adb and my device is detected if I use "fastboot devices". When I try to run "fastboot flash recovery" it gives me the message below;
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (26000 KB)...
OKAY [ 0.621s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.627s
tcolaco said:
In the fastboot & rescue mode it the bottom it says in green "PHONE Locked". This might be a problem to flash ?
I run adb and my device is detected if I use "fastboot devices". When I try to run "fastboot flash recovery" it gives me the message below;
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (26000 KB)...
OKAY [ 0.621s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.627s
Click to expand...
Click to collapse
Unlock your bootloader... Get the unlock code, unlock it, and than repeat.
D1stRU3T0R said:
Unlock your bootloader... Get the unlock code, unlock it, and than repeat.
Click to expand...
Click to collapse
How do I get the codes ?? can you please clarify me.
Thanks
tcolaco said:
How do I get the codes ?? can you please clarify me.
Thanks
Click to expand...
Click to collapse
Search in the megathread and you will find it