Hi gays, I bought today Lg g flex D955 (EUR ver.), it's very huge mobile! but I like it,
however, I noticed that developers did't support this device very much, so I hope from flexs' users to answer me about this questions
- How can I enter to recovery, first, I thought it just like way Lg g2 d802 (Vol down + power twice), but it didn't enter to recovery with me.
- After upgrading to kitkat, I search for TWRP and root for D955, but I coudn't find it here, Is gflex D955 Kitkat still dosn't have a root and recovary,I hope sombody guide me to root thread if it is avalibe
- I feel the screen not good, there is very light line on screen, is that OK ? I think because its lower ppi, maybe!
This root method works fine
http://www.androidpolice.com/2014/0...ve-and-maybe-almost-any-other-current-device/
No custom recovery for KitKat yet for this phone
Related
Hi, now before I start I apologize if this has been covered or if this has not yet been explained very well.
Recently my phone experienced some water damge to which the pkwer button now does not respond-or when it does, very sporadicly- now I read somewhere about remapping buttons, to say volume down being a wake button. But when I went about the task of doing so the methods I found did not work. First I found an sdk on an forum here which did little to solve. Then I moved onto Xposed and a module made for this. Although installj g the frameowrk with my phone somehow had some known issues, and wouldnt install... so lastely I tried editing the keyboard .kl file in /system and again had no success as tyere was no way to gain r/w privileges.
Would anyone be able to shed some lihht on this issue.
Phone is fully rooted and is running originalrom. Android ver 4.4.2 EMUI 2. 3 btw
Also I saw a custom rom for the p7 that had Xposed embed so wondering if this would work as a workaround??
Cheers and apologies if anything here doesnt make sense
Did you ask for replacement at your local repair? Alternatively you may DIY for a fiver, search Side Key Flex Cable for Huawei Ascend P7.
Cheers, good luck!
Printusrzero said:
Did you ask for replacement at your local repair? Alternatively you may DIY for a fiver, search Side Key Flex Cable for Huawei Ascend P7.
Cheers, good luck!
Click to expand...
Click to collapse
Thanks but I was more looking for a way to change buttons. And does anyone know if it is possible to flash a custom rom to the phone if the power button does not work. Eg boot recovery menu is unusable atm...?
You can reboot into recovery using ADB:
Code:
adb reboot recovery
Or using any reboot applications from Play Store.
Help with D405n bootloader and stock recovery
Ok, so I am completely new to the rooting, bootloader and recovery community, and Android in general. I was trying to unlock my bootloader, following an XDA tutorial, on how to do it on all "LG L90 varients". It was an old post, from 2014. I hard bricked my phone, waited a long time for someone to be able to help, and thankfully someone referred me to a very helpful post on how to unbrick LG L90's. So now I am unbricked, I rerooted my phone, and trying to install the Cyanogen ROM. I believe my phone still has the stock recovery and the bootloader is locked. After about an hour of searching, I found nothing helpful. So I want to know if anyone can help me. I want to unlock my bootloader and change my recovery. I don't know what I have to do first, and don't know how. Here is some info on my phone which may be helpful.
Android version: 5.0.2 (Lollipop)
Kernal version: 3.4.0+
Software version: V20a-OP1-SI
LG D405n L90
Firmware: VUK/Virgin Mobile (United Kingdom) V20a
Please reply in a noob friendly way, so I understand. Thank you.
Check this link for instructions for unlock boot loader and install custom recovery but don't use its files because you are in version 20a (android 5.02) and they maybe outdated:
http://forum.xda-developers.com/showthread.php?t=2839690
Go here for updated custom recovery and check some posts down for aboot for 20a
http://forum.xda-developers.com/showthread.php?t=2826150
Don't forget to read well the posts and don't make any mistake or you may brick your phone again.
Good luck [emoji1]
Warimation said:
Check this link for instructions for unlock boot loader and install custom recovery but don't use its files because you are in version 20a (android 5.02) and they maybe outdated:
http://forum.xda-developers.com/showthread.php?t=2839690
Go here for updated custom recovery and check some posts down for aboot for 20a
http://forum.xda-developers.com/showthread.php?t=2826150
Don't forget to read well the posts and don't make any mistake or you may brick your phone again.
Good luck [emoji1]
Click to expand...
Click to collapse
I saw it before, which is how I bricked my phone, using the wrong version. However I found a v20a download on some cyanmod.pl forum, went with Cyanogen, hated it so went back to stock, lol. Anyway, thank you for the help.
Why the CM hate?
Can you pls share why did you hate it? Currently I am in process of figuring out how get custom rom on my d405n v20a, but from what you say, maybe I should stop trying. But I cannot imagine something can be worse than L90 Lollipop...
TRBiteMyFury said:
I saw it before, which is how I bricked my phone, using the wrong version. However I found a v20a download on some cyanmod.pl forum, went with Cyanogen, hated it so went back to stock, lol. Anyway, thank you for the help.
Click to expand...
Click to collapse
Hello! I would like to ask you for a favor. Could you pretty please explain to me how you unbricked your device the first time? I did the exact same mistake and used the wrong version in that post Now my device doesn't display anything, except when I plug it into the computer or to the charger without the battery on it. Also I see a 63,9 MB drive when I plug the phone into the pc. I believe you experienced the same things since we did the same mistake. So please help me, it's my only phone and I really want it back :crying: If it's a big and hard process, then just give me the links you used to find the instructions/solution. Thanks for your time and I count on you!
Lazgeor said:
Hello! I would like to ask you for a favor. Could you pretty please explain to me how you unbricked your device the first time? I did the exact same mistake and used the wrong version in that post Now my device doesn't display anything, except when I plug it into the computer or to the charger without the battery on it. Also I see a 63,9 MB drive when I plug the phone into the pc. I believe you experienced the same things since we did the same mistake. So please help me, it's my only phone and I really want it back :crying: If it's a big and hard process, then just give me the links you used to find the instructions/solution. Thanks for your time and I count on you!
Click to expand...
Click to collapse
Hey, Lazgeor. I'm really sorry for the late reply. If you still have the same problem, here is the reply that I followed: http://forum.xda-developers.com/showpost.php?p=61808443&postcount=9
Make sure you have the right LOADER.img file. Take your battery out and whatever it says on the label is your phone model, if it's an LG L90 D410 then you can download the LOADER.img file from the reply, if not you can Google the right LOADER.img for your phone.
If you brick it even hard to where it only shows in Device Manager under "Ports (COM and LPT)" I can also show you what thread I followed. You loose everything when it gets bricked but you might be lucky if you had a gmail signed in with auto-sync on. It should recover most data such as app data, photos, etc.
TRBiteMyFury said:
Hey, Lazgeor. I'm really sorry for the late reply. If you still have the same problem, here is the reply that I followed: http://forum.xda-developers.com/showpost.php?p=61808443&postcount=9
Make sure you have the right LOADER.img file. Take your battery out and whatever it says on the label is your phone model, if it's an LG L90 D410 then you can download the LOADER.img file from the reply, if not you can Google the right LOADER.img for your phone.
If you brick it even hard to where it only shows in Device Manager under "Ports (COM and LPT)" I can also show you what thread I followed. You loose everything when it gets bricked but you might be lucky if you had a gmail signed in with auto-sync on. It should recover most data such as app data, photos, etc.
Click to expand...
Click to collapse
Hello! Thanks for your reply I found that reply about a month ago as I was searching desperately to find a solution about my phone. Thankfully it worked and since then my phone has been working perfectly. However, my IMEI number became 0 after that tutorial, but I found a solution about that too in another post (after I asked for help first ). It's here for people who are wondering: http://forum.xda-developers.com/lg-l90/help/lost-imei-device-t3285130 Thanks for posting me this message. I may have fixed my problem but others have not and it will help them!
One morning i restarted my phone( Moto G 2nd gen.) with Android Marshmallow because it went slow, but after that it restarted in fastboot mode when i pressed the power on button. Normal startup or recovery were also not working.
I checked this forum, then unlocked the bootloader and downgraded to Android 4.4.4 . My phone operated well, then at night it started asking for lollipop update again and again, i allowed for OTA update (that was my biggest mistake), and after downloading the data and during update, my phone went off and didn't start again.
Although the indicator light glows solid for sometime when connected to wall charger or to PC via USB cable.
I have tried blankflash, ADB and fastboot utility, Volume down + Power combination, pressing power button for over 120 seconds, but all in vain.....
Please suggest me a way to solve this problems, i have important data in my phone and i want to save those too.
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Feel blessed, you don't have to use moto g anymore.
Anniepoo said:
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Click to expand...
Click to collapse
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
aninishu said:
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
Click to expand...
Click to collapse
. I wish I could say it was, but unfortunately Motorola won't release this file. There have been some serious attempts to solve this problem but none have succeeded.. As far as I know the only way to fix this problem is by getting a new motherboard..
Hellow
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Diego799 said:
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Click to expand...
Click to collapse
no blankflash.zip for our model available
if you are from india then you can try out this solution for xt1068 by an guy mobile unbrick something contact him but remember it will be paid not free
Code:
https://www.youtube.com/watch?v=WynBaVyW0oU
if you from another region then need to wait for blank flash zip
There are some methods to extract the partition layouts...one can be using dd cloning & extracting img files...another can be through B2bSupportLg Tool, also calleld BoardDiag. It does have MSM8226 chipset option, but that device is W7 G2MDS. Take a working Moto G 2014 from someone, ask them to use this tool to extract the partition schemes, then you'll get .mbn files, especially prog_emmc_filehorse_msm8226.mbn . Use that to dump into the bricked device using either QFIL Tool or use this blankflash tool, replace it's singleimage files with the one you got, then execute blank-flash.bat.
Also I had some emmc prog firehorse files, all 4 related to 8x26...You can try those & confirm me if they work or not
Hi you all guys, I own a Kazam Tornado 348 and with little android knowledge decided to root it, which I managed.
After that I decided to keep playing and I did something wrong since I got the boot screen loop, the one where you are only able to enter the TWRP recovery mode but not the OS, I tried to restore it, wipe and reboot it multiple times without success. Now it seems I did even something worse because I am not able to enter recovery mode anymore and it seems will keep turning off and on (just enough to show the phone logo) until it runs out of battery
It is possible I deleted something else last time I was there, like deleting the TWRP itself? I am on total darkness here, I will appreciate if someone point me towards a possible solution, which I hope there is. Thanks for the help
Simply flash it with sp flash tool with gionee elife s5.1 firmware which is Android 5.1 or with kazam official firmware 4.4.2... It will boot up..
My answer is not for u becaus its too late but for those who came here to the thread having same problem...
help for my tornado 348
afaqktk2 said:
Simply flash it with sp flash tool with gionee elife s5.1 firmware which is Android 5.1 or with kazam official firmware 4.4.2... It will boot up..
My answer is not for u becaus its too late but for those who came here to the thread having same problem...
Click to expand...
Click to collapse
Hi, I have a similar problem but I am not an expert... so I need very easy and step by step instructions...
Could you please snd detailed information about the procedure to flash my Tornado 348 (including links or pgms to execute) ?.
Please note that the major problem is when i connect it to internet: in this case I cannot use the smartphone because it starts to open and close apps and downloads an infinite number of apps...until the memory is full and it stops.
So the best solution should be to keep it disconnected from internet (no wifi) and access it from a PC.
For this reason I kindly ask you if you could help me with sending the right sw tool to flash it from my PC connected to my Kazam.
Just in case I leave you my mail : [email protected].
Really hope you can help me. I paid my Tornado 348 € 300,00 and I have NO ASSISTANCE by Kazam... (they say they supended the assistance in Italy and I am waiting since months without any help)
Thanks a lot
Antonio
renox51 said:
Hi, I have a similar problem but I am not an expert... so I need very easy and step by step instructions...
Could you please snd detailed information about the procedure to flash my Tornado 348 (including links or pgms to execute) ?.
Please note that the major problem is when i connect it to internet: in this case I cannot use the smartphone because it starts to open and close apps and downloads an infinite number of apps...until the memory is full and it stops.
So the best solution should be to keep it disconnected from internet (no wifi) and access it from a PC.
For this reason I kindly ask you if you could help me with sending the right sw tool to flash it from my PC connected to my Kazam.
Just in case I leave you my mail : [email protected].
Really hope you can help me. I paid my Tornado 348 € 300,00 and I have NO ASSISTANCE by Kazam... (they say they supended the assistance in Italy and I am waiting since months without any help)
Thanks a lot
Antonio
Click to expand...
Click to collapse
Download official firmware of tornado 348 and see tutorial how to flash mediatek phones with sp flash tool.. Hope u'll get it
Same
This happened to me too, and not only I couldn't flash a newer Android version (5.1), my IMEI number got destroyed, and I have tried many things to fix it and restore it, but that didn't work.
Hi everyone,
I own a Motorola Moto G2 (XT1068, dual sim) that came used with Android 6.0 on it.
I installed TWRP (twrp-3.0.2-3-titan.img) on it but failed to root Android 6.0 as well as 5.0 for whatever not yet understood reason. I don't do Android development for a living but I'm an IT professional, so handling adb and fastboot as well as reading and understanding instructions isn't a problem.
I flashed stock Android 4.4.4 (RETDEALL_XT1068_4.4.4_KXB21.85-14) which I successfully rooted by installing SuperSU via TWRP.
Next I updated SuperSU, verified that root access is indeed working and installed FlashFire, which I hoped to use to install OS upgrades, possibly without losing root. FlashFire is new to me (as of yesterday), everything else mentioned up to here is not.
I used the "Flash ZIP or OTA" action from within FlashFire and the previously downloaded update file in the /cache directory. I can't reproduce the file name since the phone is currently unusable and I didn't write the file name down prior to using FlashFire.
The state of the phone after this unsuccessful attempt was that of a broken USB device, i.e. unable to even register as whatever type of USB device. I learned that this can be fixed by holding the power button down for more than one minute, after which I managed to
get the phone to be shown as working "RELINK HS-USB QDLoader 9008" USB serial device in Windows 7 device manager.
I used the information in these two threads:
http://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Since I started with Android 4.4.4 trying to upgrade to 5.0, I had hoped that the blank flash package for one of these Android versions would help fix my problem, but as of now, this doesn't seem to be the case. At the end of the blank flashing process, I get the message
FAILED <blank-flash:sdl-transfer-image:sdl-hello: error sending packet>
After that, the phone still has a black screen and cannot boot into anything. Repeating blank flash works after resetting whatever part of it is still working by holding the power button down for about 30+ seconds.
Is there anything obvious (or maybe even not so obvious) that I missed?
Thanks for reading and any help and/or pointers in the right direction.
hey , contact me on pm
salkollizz said:
hey , contact me on pm
Click to expand...
Click to collapse
Did you solved the problem of hard brick of Moto G 2014?