Related
Hello,
Few days ago i bought HTC At&t Tilt/8925 in USA. Now i'm at home in europe and need to unLock it.
Also find in Ebay lots, where people who have access to some databases sell "UNLOCK Code For *At&t/Cingular* Tilt/8925", but they need IMEI code of phone at first.
So my question is how to find IMEI phone on locked phone?
As i know i must type "*#06#", but how can i do it, if the only sreen that i can view is
Network is locked, please input unlock code.
To make an emergency call, type the emeregency number and tap emergency
And field under that, where i must type unlock code?
Click to expand...
Click to collapse
So where i must type "*#06#"? in the that field and click ok? I'm afraid, that phone can understand that it's unlock code (and as i know i cann't type more than 5 wrong codes )
Any advice will be appreciated
remove the battery and it should be listed on the phone.
Or type *#06# in your phone dailer .
denco7 said:
Or type *#06# in your phone dailer .
Click to expand...
Click to collapse
i cann't type, as there is one field just for UNLOCK CODE.
Typing in this field will be understand, as UNLOCK CODE
remove the battery and it should be listed on the phone.
Click to expand...
Click to collapse
really
thx
there are 3 codes:
P/n
IMEI
S/N
Waw .. thanks ... so it's the right IMEI code?
Btw, need you advice , does unclocking phone with just codes (as on ebay) work really?
A check this guys have nice rating, but as you know sometimes, just ratings don't mean anything.
Once again, thank you ChumleyEX !
Normally you are able to get a code from at&t to unlock it so I would pay for anything. Also I think you can use a method from this site to unlock.
I'm not sure if you're able to call at&t, but if you can, just call them and tell them you are traveling over seas and you need to unlock it.
http://forum.xda-developers.com/showthread.php?t=361039
;-)
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
REMOVE YOUR SIM CARD!
That will stop the "Network Lock" Message from displaying.
Then you can get your IMEI from the Device Information Page or actually get into Windows Mobile and be able to use the Unlocker found here in the forums.
alexod said:
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Click to expand...
Click to collapse
Is it mean, that at first i must downgrade it to 6.0, unlock and only after this upgrade to 6.1 ?
Exactly.
filler
hello,
due to my stupidity, I blocked the sim unlock counter (over three trials).
this is not the pin code, this is the code to unlock permanently the phone.
Now, how do I unlock please?
Puk code from provider?
Sent from my LT30p using xda app-developers app
[email protected] said:
Puk code from provider?
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
this is not the pin code, this is the code to unlock permanently the phone.
Ooops - sorry, my mistake. I have No idea what you would need to do, you could start by contacting your provider or Sony if Google search doesn't have the answer. Good Luck.
Flash a generic ftf with flashtool, performing a data reset. Easy
.coomb. said:
Flash a generic ftf with flashtool, performing a data reset. Easy
Click to expand...
Click to collapse
and that would help how exactly??
tumult said:
and that would help how exactly??
Click to expand...
Click to collapse
It will perform a factory reset and thus erase the security settings...
.coomb. said:
It will perform a factory reset and thus erase the security settings...
Click to expand...
Click to collapse
so read the first post again. no hard feelings.
edit: don't want to be another smartass as some on this forum, sorry.. if I read it correctly it is code to unlock phone that is SIM LOCKED to a network and hard reset will not help in this case.
Yeah well maybe it's that one, it isn't very clear though.
Unlock phone
The sony unlock bootloader pages refer to the procedure of unlocking the phone, but they go on to say something along the lines of- if you don't get the code right you are permanently locked. Was that what you were attempting?
Same problem here
I want to reset the counter too but I don't know how. I have the code to unlocke my phone to ant network but I have no more attemps.. Is there any solution to that problem?
Afaik there exists an unblock code as well for such cases, you need to ask the provider of the unlock code for that second code and a tutorial how to enter it. However, most unlock code providers state in their howtos that most devices have 10 attempts to enter the sim unlock code before you get blocked and you should only use up to five, and make a video proof that the code does not work, then they will either provide the unblock code, help you with the procedure or refund your money if they can not help.
_________________________
tapatalked from GalaxyS3
plz post download link
.coomb. said:
Flash a generic ftf with flashtool, performing a data reset. Easy
Click to expand...
Click to collapse
sir where i can download generic ftf plz provide download link
Read the all in one thread
Sent from my LT30p using xda app-developers app
sir plz provide generic download link
kmrnmth said:
sir where i can download generic ftf plz provide download link
Click to expand...
Click to collapse
gregbradley said:
Read the all in one thread
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
kmrnmth said:
sir plz provide generic download link
Click to expand...
Click to collapse
Please read the all in one thread.
Its the very first thread in the Q&A section.
I have my simlock counter with 0
Hi, I would like to unlock the simlock of my Sony Xperia T (lt30p), but system information show:
"[X] Network 0"
Is ther any method (Sofware, adapters, etc), to unlock it?, well, until someone finds some method to permanently unlock.
Thanks :good:
link8517 said:
Hi, I would like to unlock the simlock of my Sony Xperia T (lt30p), but system information show:
"[X] Network 0"
Is ther any method (Sofware, adapters, etc), to unlock it?, well, until someone finds some method to permanently unlock.
Thanks :good:
Click to expand...
Click to collapse
same problem here what is solution !!! please help thx
Information regarding Sim Lock in Service Info, Xperia J
Hello all. A few days back one of my friend gave me his xperia j and asked me to help him unlock his phone. Now that i go into Service info -> Sim lock, this is what i see:
[0] Network 0
[x] Network Subnet 0
[x] Service Provider 0
[x] Corporate 0
[x] Sim 0
Im not sure about this " [0] Network 0 " and wanted to know if this phone is counter blocked or is there any chance to unlock it?
Thanks for your help
Scetian said:
Hello all. A few days back one of my friend gave me his xperia j and asked me to help him unlock his phone. Now that i go into Service info -> Sim lock, this is what i see:
[0] Network 0
[x] Network Subnet 0
[x] Service Provider 0
[x] Corporate 0
[x] Sim 0
Im not sure about this " [0] Network 0 " and wanted to know if this phone is counter blocked or is there any chance to unlock it?
Thanks for your help
Click to expand...
Click to collapse
I have the same situation! Did you find a solution? I would very appreciate if you help me!
Hi. I have the Moto X xt1058 (AT&T) and I bought the code on 2 different pages. In one them they gave me 2 codes to try and when I tried to put the codes the phone showed an error to unlock the network and then in the other page they gave me the same 2 codes. I've reseted the phone and it keeps showing me the same error when I try to unlock it.
I have android system 4.4.4 stock.
Taling said:
Hi. I have the Moto X xt1058 (AT&T) and I bought the code on 2 different pages. In one them they gave me 2 codes to try and when I tried to put the codes the phone showed an error to unlock the network and then in the other page they gave me the same 2 codes. I've reseted the phone and it keeps showing me the same error when I try to unlock it.
I have android system 4.4.4 stock.
Click to expand...
Click to collapse
I thought AT&T unlocked phones if you requested it due to that law that was put into effect for global capable phones?
I don't know how to do that process and I have another moto X from AT&T which I unlocked by buying the unlock code on a page.
very often its not working because custom ROM or custom baseband flashed, so please make sure that your phone is completely stock
its completely i updated by OTA to 4.4.4
First, you can try -> https://www.att.com/deviceunlock/?#/ it appears by the conditions that even NON-ATT customers can request the SIM/Carrier unlock code now.
Also, there was discussion about some SIM or Carrier Unlock codes not working on devices with a particular series of IMEI numbers... I don't know the specifics because I don't have an ATT X. See -> http://forum.xda-developers.com/moto-x/general/sim-unlock-moto-x-gens-t3011662 and start around Post #21 for more details, and more importantly post #31 of that thread for a possible resolution.
And be careful, I'm not sure how many attempts you get to enter the SIM/Carrier unlock code.
i try here https://www.att.com/deviceunlock/?#/ but dont work cuz said me: "Error: We found no record of the IMEI Number you entered. Check your device's 15-digit IMEI Number by dialing *#06# (errorCode.ULP2003)"
i bought another unlock code on ebay... i will try again
Taling said:
i try here https://www.att.com/deviceunlock/?#/ but dont work cuz said me: "Error: We found no record of the IMEI Number you entered. Check your device's 15-digit IMEI Number by dialing *#06# (errorCode.ULP2003)"
i bought another unlock code on ebay... i will try again
Click to expand...
Click to collapse
What are the first 5 digits of the IMEI? Is it 35321? If so, did you see -> http://forum.xda-developers.com/showpost.php?p=60680211&postcount=31
Yes, is 35321 but i have other Moto X start 35321 and i can unlock, but this one i cant do it....
Taling said:
Yes, is 35321 but i have other Moto X start 35321 and i can unlock, but this one i cant do it....
Click to expand...
Click to collapse
And that is why I pointed you to that post... it is another forum member explaining the exact situation you are having, and how he resolved it. (FOR FREE)
Its worth a try... if you would only take a few minutes to read the discussion, and that post.
Saythis said:
I thought AT&T unlocked phones if you requested it due to that law that was put into effect for global capable phones?
Click to expand...
Click to collapse
That's SIM unlock, not bootloader.
There's no official support from anyone on either side, AT&T or Motorola, for unlocking the bootloader on the XT1058. In fact if you call them and ask, they'll just tell you "no".
Furthermore, even senior developers for the platform like jcase have said that unlocking the bootloader on the XT1058 running KitKat 4.4.4 is more-or-less impossible (at the moment).
DarkWolffe said:
That's SIM unlock, not bootloader.
There's no official support from anyone on either side, AT&T or Motorola, for unlocking the bootloader on the XT1058. In fact if you call them and ask, they'll just tell you "no".
Furthermore, even senior developers for the platform like jcase have said that unlocking the bootloader on the XT1058 running KitKat 4.4.4 is more-or-less impossible (at the moment).
Click to expand...
Click to collapse
The OP was asking about SIM Unlocking (or carrier unlocking)... notice the BOLD/Italic I added to the following quote...
Taling said:
Hi. I have the Moto X xt1058 (AT&T) and I bought the code on 2 different pages. In one them they gave me 2 codes to try and when I tried to put the codes the phone showed an error to unlock the network and then in the other page they gave me the same 2 codes. I've reseted the phone and it keeps showing me the same error when I try to unlock it.
Click to expand...
Click to collapse
Yes i order another unlock code and all web page send me the sames code that i used :l
Taling said:
Yes i order another unlock code and all web page send me the sames code that i used :l
Click to expand...
Click to collapse
PLEASE READ -> http://forum.xda-developers.com/showpost.php?p=60680211&postcount=31 and follow what is described there (email to the address listed)... Make sure you ask for SIM Unlock aka Network Unlock... and don't just say "unlock"
Let us know how you make out.
i read that and i send a email to [email protected] and they said me cant help me :l
Taling said:
i read that and i send a email to [email protected] and they said me cant help me :l
Click to expand...
Click to collapse
Was your subject line ATTN: Donald Hicks - Global Leader Service Operations as stated in that post?
Did HE reply? or someone from Moto support? Did they explain why they can't help?
This:
Hello Starling,
Thank you for contacting Motorola. Unfortunately, as SIM issues are largely carrier-related, the spectrum of assistance we have to offer on the manufacturer's side of things is rather limited. When trying to use the subsidy unlock code to unlock your device, are you trying this with the new SIM card or the old one in your device? You should input the subsidy unlock code with the new SIM card if you have not already done so and try it again. If you have reset the device and you're still experiencing the issue, you will likely need to contact AT&T about this issue and they can look into things more fully on their end. The IMEI of your device shows as valid in our system, so if AT&T is having an issue with it, that would be on their end and you would also need to contact them about that. If you would be more comfortable with it, either a member of our tech support team or myself could reach out to you and make a conference call with AT&T to get this resolved for you as well.
Please let me know how you would like to proceed and I will assist you to the best of my ability.
Thank you for choosing Motorola and have a great day!
Cas
Motorola Mobility
Click to expand...
Click to collapse
Taling said:
This:
Click to expand...
Click to collapse
I would take them up on their offer in the final sentence of the first paragraph... To have a member of Moto support reach out to you and make a conference call with AT&T to get this resolved.
KidJoe said:
The OP was asking about SIM Unlocking (or carrier unlocking)... notice the BOLD/Italic I added to the following quote...
Click to expand...
Click to collapse
Whoops! Sorry about that, I guess my eyes skipped over that bit.
In that case, yeah! You should be able to grab it from AT&T's website or by calling in and asking about it.
I spoke with ATT and Motorola Agent and NOTHING.!
Motorola only help me to contact with ATT and they said me... "We cant help you with that, sorry"
Hi ,
My brother bought P7-L10 from Kuwait and it worked well using SIM card from there. But when he reached India and tried Indian SIM card , it's not detecting. Tried different Service Providers SIM card, but still it's not detecting. Please let me know whether upgrading the firmware will solve the issue or not. It's having Build No: P7-L10V100R001C00B126 . Please help me to fix the problem. I've tried factory reset, but it doesn't worked.
RAJEEV A said:
Hi ,
My brother bought P7-L10 from Kuwait and it worked well using SIM card from there. But when he reached India and tried Indian SIM card , it's not detecting. Tried different Service Providers SIM card, but still it's not detecting. Please let me know whether upgrading the firmware will solve the issue or not. It's having Build No: P7-L10V100R001C00B126 . Please help me to fix the problem. I've tried factory reset, but it doesn't worked.
Click to expand...
Click to collapse
i think it's locked on that kuwaitien Service Provider, you have to unlock it
go to huawei Kuwait website get leatest update for your p7 from there
install it and i think its fix your problem
zaabolla said:
i think it's locked on that kuwaitien Service Provider, you have to unlock it
Click to expand...
Click to collapse
But "Enter SIM Unlock Code" prompt is not showing after inserting the SIM. After buying the code does it work?
RAJEEV A said:
But "Enter SIM Unlock Code" prompt is not showing after inserting the SIM. After buying the code does it work?
Click to expand...
Click to collapse
When you power on the phone, it is shown something else than Huawei (something like vodafone or orange)?
If so, the phone is locked on the respective network, and you must unlock it, like our collegue ranaji said.
If not, it is possible to be a cust problem. That means that your phone was made for a geaographic region, and it will not work properly with other networks than the ones on the specified region. If so, you must change your cust number.
First, you must see what your cust number is. For that, search on Settings, phone properties, the last line <Cust Number< and tell us what is it. Good luck!!!
The phone is a very good phone!!!
vd1122 said:
When you power on the phone, it is shown something else than Huawei (something like vodafone or orange)?
If so, the phone is locked on the respective network, and you must unlock it, like our collegue ranaji said.
If not, it is possible to be a cust problem. That means that your phone was made for a geaographic region, and it will not work properly with other networks than the ones on the specified region. If so, you must change your cust number.
First, you must see what your cust number is. For that, search on Settings, phone properties, the last line <Cust Number< and tell us what is it. Good luck!!!
The phone is a very good phone!!!
Click to expand...
Click to collapse
During power on, nothing else is showing other than Huawei. Then I think, as you said, it was made for a geographic region. Custom Version: CUSTC433D619.
I've done firmware update for the respective region, but it's of no use.
Please help to solve the problem.
ranajii said:
go to huawei Kuwait website get leatest update for your p7 from there
install it and i think its fix your problem
Click to expand...
Click to collapse
Updated latest firmware for the respective region, but same issue exists.
RAJEEV A said:
Updated latest firmware for the respective region, but same issue exists.
Click to expand...
Click to collapse
As i told you you have to unlock it, the problem is not in update firmware.
you have 2 choices:
1/ contact the koweitien opérator to get your unlock code
2/ go to repair office to unlock it with phone boxes (if exist)
zaabolla said:
As i told you you have to unlock it, the problem is not in update firmware.
you have 2 choices:
1/ contact the koweitien opérator to get your unlock code
2/ go to repair office to unlock it with phone boxes (if exist)
Click to expand...
Click to collapse
From Where you buy it in Kuwait?
Mine is from viva and im using it in Pakistan no any problem here
Some time when you cut you sim then its not working on some set check any other sim on your set
ranajii said:
From Where you buy it in Kuwait?
Mine is from viva and im using it in Pakistan no any problem here
Some time when you cut you sim then its not working on some set check any other sim on your set
Click to expand...
Click to collapse
It's also from VIVA. Tried different service provider SIM card (both cut & Micro). I think, I've to unlock it as suggested by Mr. Zaabolla.
zaabolla said:
As i told you you have to unlock it, the problem is not in update firmware.
you have 2 choices:
1/ contact the koweitien opérator to get your unlock code
2/ go to repair office to unlock it with phone boxes (if exist)
Click to expand...
Click to collapse
I've one doubt. "Enter SIM Unlock Code" prompt is not showing after inserting the SIM. Then how can I enter it after buying the code through online unlock website. Please help if it's a valid doubt.
RAJEEV A said:
I've one doubt. "Enter SIM Unlock Code" prompt is not showing after inserting the SIM. Then how can I enter it after buying the code through online unlock website. Please help if it's a valid doubt.
Click to expand...
Click to collapse
ok, to remove doubts, type this code in phone dialer ( * # * # 2846579 # * # * )
now you are in "ProjectMenu"
choose n°3 ( Network information Query )
now choose n°2 ( Sim Lock info )
if the phone is locked you will see " SIMLOCK_ACTIVE "
if not locked you see " SIMLOCK_DEACTIVE "
Hi,
It's showing "SIMLOCK_DEACTIVE".
zaabolla said:
ok, to remove doubts, type this code in phone dialer ( * # * # 2846579 # * # * )
now you are in "ProjectMenu"
choose n°3 ( Network information Query )
now choose n°2 ( Sim Lock info )
if the phone is locked you will see " SIMLOCK_ACTIVE "
if not locked you see " SIMLOCK_DEACTIVE "
Click to expand...
Click to collapse
Hi,
It's showing "SIMLOCK_DEACTIVE" .
Ok is your Kuwaiti sim still working on it?
ranajii said:
Ok is your Kuwaiti sim still working on it?
Click to expand...
Click to collapse
Currently my brother is using that SIM in Kuwait. Hence unable to check it.
zaabolla said:
ok, to remove doubts, type this code in phone dialer ( * # * # 2846579 # * # * )
now you are in "ProjectMenu"
choose n°3 ( Network information Query )
now choose n°2 ( Sim Lock info )
if the phone is locked you will see " SIMLOCK_ACTIVE "
if not locked you see " SIMLOCK_DEACTIVE "
Click to expand...
Click to collapse
Hi,
It's showing "SIMLOCK_DEACTIVE" .
RAJEEV A said:
Hi,
It's showing "SIMLOCK_DEACTIVE" .
Click to expand...
Click to collapse
can you post screen shot of mobile info pages?
ranajii said:
can you post screen shot of mobile info pages?
Click to expand...
Click to collapse
Hi,
Please find the attached snapshots.
You can flash B853 directly, try it
By force update ( 3 bottons )
May be it resolve the problem
hi brothers, my device huawei p9 eva-l09 is bricked, he cold in huawei logo and reboot, boot loop i do.. i need product id for unlock bootloader.. help me please..
MODEL EVA - L09
benfica017 said:
hi brothers, my device huawei p9 eva-l09 is bricked, he cold in huawei logo and reboot, boot loop i do.. i need product id for unlock bootloader.. help me please..
MODEL EVA - L09
Click to expand...
Click to collapse
please don't post your IMEI number on here for security
can you get into Bootloader still?
or recovery?
Do you try with the three buttons method?
wILLRoiD said:
please don't post your IMEI number on here for security
can you get into Bootloader still?
or recovery?
Click to expand...
Click to collapse
i can only enter in fastboot mode nothing else
henryco11 said:
Do you try with the three buttons method?
Click to expand...
Click to collapse
yes but don't work, in unlocker bootloader from huawei site appears this (Please fill in the correct identification code; please check the product type is entered correctly, if it is more IMEI / MEID phone, use a different IMEI or MEID retry)
benfica017 said:
yes but don't work, in unlocker bootloader from huawei site appears this (Please fill in the correct identification code; please check the product type is entered correctly, if it is more IMEI / MEID phone, use a different IMEI or MEID retry)
Click to expand...
Click to collapse
https://www.dc-unlocker.com/?utm_so...um=email&utm_campaign=huaweibootloaderapp_t32
I downloaded the app on my telephone and got the unlock it's going to cost money to unlock it from this company it took 12 hours to get the code for me
wILLRoiD said:
https://www.dc-unlocker.com/?utm_so...um=email&utm_campaign=huaweibootloaderapp_t32
I downloaded the app on my telephone and got the unlock it's going to cost money to unlock it from this company it took 12 hours to get the code for me
Click to expand...
Click to collapse
i phone don't wake, what option u choose to buy.. ?
I have same problem. How to fix it?
This is the last resort method which uses DC-Phoenix and costs money, if your phone is bootloader and FRP locked:
https://forum.xda-developers.com/showpost.php?p=71767614&postcount=7