I tried 5 RUU's but non of them worked. I know I'm doing something wrong. But if you guys could point me to the correct RUU it would be one less problem for me. Thanks in advance. and More power
****UNLOCKED****
M7_UL PVT SHIP S-OFF RH
CID-HTC__044
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Apr 25 2014
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
Lucky for you yatindroid just posted this, it's not an ruu but will get you back to stock, especially as you are s-off.
http://forum.xda-developers.com/htc-one/general/stock-rom-reset-t2802061
Seanie280672 said:
Lucky for you yatindroid just posted this, it's not an ruu but will get you back to stock, especially as you are s-off.
http://forum.xda-developers.com/htc-one/general/stock-rom-reset-t2802061
Click to expand...
Click to collapse
link for cid 038 not for 044
What's version main ?
Try this http://www.htc1guru.com/dld/ruu-zip...0-13_10-33-1150-01_release_311678_signed-zip/
yatindroid said:
link for cid 038 not for 044
What's version main ?
Try this http://www.htc1guru.com/dld/ruu-zip...0-13_10-33-1150-01_release_311678_signed-zip/
Click to expand...
Click to collapse
I think 038 and 044 use the same firmware, 707 check if both are in android-info
Seanie280672 said:
I think 038 and 044 use the same firmware, 707 check if both are in android-info
Click to expand...
Click to collapse
No
hardware is different for both version
38 use U
44 use UL
Related
I rooted my HTC One (europe vodafone) a few weeks ago and I really want to go back to Stock.
I have relocked using cmds i found on here, but now the phone just boots into the bootloader as shown below.
Any ideas what to do next?
i tried using this RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe but it failed.
You can't flash an unbranded RUU on a Vodafone handset unless you're S-OFF
EddyOS said:
You can't flash an unbranded RUU on a Vodafone handset unless you're S-OFF
Click to expand...
Click to collapse
ok. how do i change that? sorry new to this stuff...
and i'd be more tha happy to back to the stock vodafone rom, im not really bothered about branding...just cannot find one that works
p17fld said:
ok. how do i change that? sorry new to this stuff...
and i'd be more tha happy to back to the stock vodafone rom, im not really bothered about branding...just cannot find one that works
Click to expand...
Click to collapse
Im trying to post a link to a photo of what i am seeing on my phone but i cant as im a new member...
here goes :
***TAMPERED***
***RELOCKED***
***security warning***
M7_UL PVT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v31.120.274.0617
OS-2.24.161.1
eMMC-boot 2048mb
p17fld said:
Im trying to post a link to a photo of what i am seeing on my phone but i cant as im a new member...
here goes :
***TAMPERED***
***RELOCKED***
***security warning***
M7_UL PVT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v31.120.274.0617
OS-2.24.161.1
eMMC-boot 2048mb
Click to expand...
Click to collapse
You're S-ON, and on hboot 1.54 which means you can't get S-Off, to be able to run a non vodafone RUU.
EDIT: why do you need to go back to stock? Anyway, you could use one of mike's stock ROMs from here: http://forum.xda-developers.com/showthread.php?t=2224752
nkk71 said:
You're S-ON, and on hboot 1.54 which means you can't get S-Off, to be able to run a non vodafone RUU.
Click to expand...
Click to collapse
OK, so where do i get the Vodafone Ruu? Direct from Vodafone?
No, they leak if you're lucky but I don't think a Vodafone one has leaked for a while. Can you type this when connected in fastboot:
fastboot getvar all
and post what you get back (but leave out the serial number and IMEI)
EddyOS said:
No, they leak if you're lucky but I don't think a Vodafone one has leaked for a while. Can you type this when connected in fastboot:
fastboot getvar all
and post what you get back (but leave out the serial number and IMEI)
Click to expand...
Click to collapse
c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.24.161.1
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: VODAP001
INFObattery-status: good
INFObattery-voltage: 4189mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-d16dc66985
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.044s
c:\adb>
p17fld said:
c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.24.161.1
INFOversion-misc: PVT SHIP S-ON
INFOserialno: xxxxxxxxxxxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: VODAP001
INFObattery-status: good
INFObattery-voltage: 4189mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-d16dc66985
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.044s
c:\adb>
Click to expand...
Click to collapse
(but leave out the serial number and IMEI)
Click to expand...
Click to collapse
You're on 2.24.161.1, there's no RUU or CWM backup as far as i know.
I think the closest to get to stock is to use mike's stock ROM.
EDIT: there is a CWM backup for 1.29.161.7, but you can't really use that because it will break your touchscreen drivers.
EDIT 2: don't know if that would work, but if you have a OTG, I read somewhere someone used it with a mouse to get the official OTA
nkk71 said:
You're on 2.24.161.1, there's no RUU or CWM backup as far as i know.
I think the closest to get to stock is to use mike's stock ROM.
Click to expand...
Click to collapse
Thanks, is that available on here? I really just want get my phone back online to be honest.
nkk71 said:
You're on 2.24.161.1, there's no RUU or CWM backup as far as i know.
I think the closest to get to stock is to use mike's stock ROM.
EDIT: there is a CWM backup for 1.29.161.7, but you can't really use that because it will break your touchscreen drivers.
EDIT 2: don't know if that would work, but if you have a OTG, I read somewhere someone used it with a mouse to get the official OTA
Click to expand...
Click to collapse
Just went back to unlocked. a very pointless exercise on my part, seems there isnt a way to go back to stock.
This highlights the importance of taking a nandroid before doing anything
Well as stated you can buy an otg cable and upgrade with a mouse
Sent from my HTC One X using xda app-developers app
Hi All, Firstly let me say thankyou for the years of help i've received from all on this site...
Ok so without thinking i went ahead and tried rooting my HTC one (M7)
It didnt work but now i have TAMPERED and UNLOCKED,
I would like to know if there is a way I can Remove both the above and revert back to how it was? if so can i also remove the Clockwork Recovery as well?
I just want it to go back to how it was before i started messing.
phone details
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
HTC one UK, o2, KITKAT 4.4.2 sense 5.5
i tried S-OFF with firewater, revone and toolkit but still cant S-OFF, so any help to revert back to how it was (noob style) thankyou all
dazzco said:
Hi All, Firstly let me say thankyou for the years of help i've received from all on this site...
Ok so without thinking i went ahead and tried rooting my HTC one (M7)
It didnt work but now i have TAMPERED and UNLOCKED,
I would like to know if there is a way I can Remove both the above and revert back to how it was? if so can i also remove the Clockwork Recovery as well?
I just want it to go back to how it was before i started messing.
phone details
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
HTC one UK, o2, KITKAT 4.4.2 sense 5.5
i tried S-OFF with firewater, revone and toolkit but still cant S-OFF, so any help to revert back to how it was (noob style) thankyou all
Click to expand...
Click to collapse
Should be pretty simple
just relock your bootloader with fastboot
fastboot oem lock
then flash this
RUU >> http://www.androidruu.com/getdownlo...8_10.38r.1157.04L_release_353143_signed_2.exe
clsA said:
Should be pretty simple
just relock your bootloader with fastboot
fastboot oem lock
then flash this
Click to expand...
Click to collapse
thankyou very much for the VERY quick response...
I will try this now!
could you.... please.... in case i get stuck tell me how to relock bootloader with fastboot because apparently i need S-OFF to do this!
thankyou again
dazzco said:
thankyou very much for the VERY quick response...
I will try this now!
could you.... please.... in case i get stuck tell me how to relock bootloader with fastboot because apparently i need S-OFF to do this!
thankyou again
Click to expand...
Click to collapse
I just did ?
fastboot oem lock
clsA said:
I just did ?
fastboot oem lock
Click to expand...
Click to collapse
Sorry! I tried it But it says it cant do it because i need the correct Rom Update Utility
Error 131 customer id error
dazzco said:
Sorry! I tried it But it says it cant do it because i need the correct Rom Update Utility
Click to expand...
Click to collapse
then your not _O2_UK_4.20.206.16
what does it say your OS is ?
clsA said:
then your not _O2_UK_4.20.206.16
what does it say your OS is ?
Click to expand...
Click to collapse
it doesnt but my misses said its unlocked.
it says OS- (nothing after)
thanx
dazzco said:
it doesnt but my misses said its unlocked.
it says OS- (nothing after)
thanx
Click to expand...
Click to collapse
relock the bootloader
then run the ruu
clsA said:
relock the bootloader
then run the ruu
Click to expand...
Click to collapse
Still same, Sorry this is the file i got from getvar
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ************* (i removed)
(bootloader) imei: *************** (i removed)
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3914mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.055s
Question: I'd to upgrade firmware to the newest one, but I have S-On and when I boot into the Fastboot it reads.
***TAMPERED***
***Unlocked****
M7_UL PVT Ship S-On RH
HBoot-1.55.000
Radio-4T.20.3218.13
OpenDsp-v31.120.274.0617
Os-3.17.502.3
eMMC-Boot 2048MB
I just checked my Recovery and it's Team Win Recovery Project v2.8.4.0
I'd like to turn S-Off and being as I've already installed a custom recovery on it months ago (Jan) and I updated and attempted to turn S-off last week when I installed Viper Rom 8.0. I went with the OEM Method of attempting to unlock the phone by going to HTC's site and downloading the unlock and it ran but still showed S-On in the "M7_UL PVT Ship S-On RH" part when I checked after running the OEM Method of turning S-Off.
I'm confused by if I'll have to install REVONE and if I have to update each firmware in order or can just go to the latest version of the firmware can someone point me the right direction please?
Also I have the ATT Version but my carrier is TMobile does this matter when picking a firmware and/or Rom?
Thank you all for your time.
Here's my phone's info.
version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4T.20.3218.13
version-cpld: None
version-microp: None
version-main: 3.17.502.3
version-misc: PVT SHIP S-ON
serialno: #############
imei: ###############
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: CWS__001
battery-status: good
battery-voltage: 4173mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-a85199f7
hbootpreupdate: 11
gencheckpt: 0
bigj8705 said:
I went with the OEM Method of attempting to unlock the phone by going to HTC's site and downloading the unlock and it ran but still showed S-On in the "M7_UL PVT Ship S-On RH" part when I checked after running the OEM Method of turning S-Off.
Click to expand...
Click to collapse
There is no "oem" method for S-OFF, htcdev.com is to unlock the bootloader not to s-off, your bootloader is already unlocked.
I'm confused by if I'll have to install REVONE
Click to expand...
Click to collapse
Revone will only s-off hboot 1.44, you are on 1.55 use rumrunner s-off or sunshine s-off.
Also I have the ATT Version but my carrier is TMobile does this matter when picking a firmware and/or Rom?
Click to expand...
Click to collapse
You won't receive ota update on an at&t phone if you ar enot using the at&t network, better to convert your phone to another version like the Developer Edition version after achieving s-off.
and if I have to update each firmware in order or can just go to the latest version of the firmware can someone poi
Click to expand...
Click to collapse
Hello Guys
i have a problem with my
HTC One M7 AT&T
MID: PN0712000
CID: CWS__001
cant get it back to stock. showing error that it is not the right RUU file
i am trying to flash this one RUU_M7_UL_JB_50_Cingular_US_1.26.502.15_Radio_4A.17.3250.20_10.40.1150.04_release_326691_signed_2_2
plz help me.....!
And it also show version-main empty
Only showing this display
***TAMPERED***
***RELOCKED***
*** Security warning***
m7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4m.27.3218.14
OpenDSP-v32.120.274.0909
OS-
amir_khan007 said:
Hello Guys
i have a problem with my
HTC One M7 AT&T
MID: PN0712000
CID: CWS__001
cant get it back to stock. showing error that it is not the right RUU file
i am trying to flash this one RUU_M7_UL_JB_50_Cingular_US_1.26.502.15_Radio_4A.17.3250.20_10.40.1150.04_release_326691_signed_2_2
plz help me.....!
and it also show version-main empty
Only showing this display
***TAMPERED***
***RELOCKED***
*** Security warning***
m7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4m.27.3218.14
OpenDSP-v32.120.274.0909
OS-
Click to expand...
Click to collapse
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here
alray said:
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here
Click to expand...
Click to collapse
will it still flash with version-main empty?
I am a noob at these things so kindly help me!!
You could to try flash 1.44 HBOOT, then give it a try (not to try a RUU flash, but back to stock, update everything and then try to RUU if needed)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT361W902272
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4316mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.094s
These are my Getvar all Details...
amir_khan007 said:
will it still flash with version-main empty?
Click to expand...
Click to collapse
Yes
teetx said:
You could to try flash 1.44 HBOOT, then give it a try (not to try a RUU flash, but back to stock, update everything and then try to RUU if needed)
Click to expand...
Click to collapse
You can't downgrade the hboot with S-ON and you don't want to downgrade it if flashing a 7.xx.xxx.x RUU, you need at least hboot 1.57.
alray said:
Yes
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_Radio_4M.32.3218.06_10.46.1718.01L_release_449059_signed_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
@Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!
Click to expand...
Click to collapse
alray said:
Yes
You can't downgrade the hboot with S-ON and you don't want to downgrade it if flashing a 7.xx.xxx.x RUU, you need at least hboot 1.57.
Click to expand...
Click to collapse
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_R adio_4M.32.3218.06_10.46.1718.01L_release_449059_s igned_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
@Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!
amir_khan007 said:
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_R adio_4M.32.3218.06_10.46.1718.01L_release_449059_s igned_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
@Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!
Click to expand...
Click to collapse
These errors don't look right at all. Did you read the "How to flash" instructions on the link @alray gave you.
Also be sure to use an admin cmd window
mb_guy said:
These errors don't look right at all. Did you read the "How to flash" instructions on the link @alray gave you.
Also be sure to use an admin cmd window
Click to expand...
Click to collapse
'How to flash' in the link is for zip RUU. my one is EXE file...!
PLZ TELL ME HOW TO GET RID OF THIS ERROR....!!
Try with another computer, looks like a Windows problem not related to the ruu itself. Do you have the latest C++ redistr installed on your computer?
alray said:
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here
Click to expand...
Click to collapse
OH MY GOODNESS
ITS DONE
ITS BACK
I CANT BELIEVE IT
@alray I dont know how to thank you. but I will pray to GOD to give you all the heavens HE made.................!!!
Amen
thanks buddy
thank you really very much....!!
Hlw Unfortunately my brother brickd m7 , I mean formated system from twrp. now I can't flash any RUU.exe(showed error 155) or Zip(showed error: too many links)
Adb also not working in twrp
& otg also
only fastboot working.
Device bootloader
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4T.24.3218.09
OpenDSP-v32.120.274.0909
OS-null*
eMMC-boot 2048MB
is there any possible way to boot my phone
ifty_islam said:
Hlw Unfortunately my brother brickd m7 , I mean formated system from twrp. now I can't flash any RUU.exe(showed error 155) or Zip(showed error: too many links)
Adb also not working in twrp
& otg also
only fastboot working.
Device bootloader
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4T.24.3218.09
OpenDSP-v32.120.274.0909
OS-null*
eMMC-boot 2048MB
is there any possible way to boot my phone
Click to expand...
Click to collapse
Error 155= You're trying to flash a RUU with an unlocked bootloader. If your phone is S-ON, like yours, you must have a locked or re-locked bootloader to flash a RUU. You can relock the BL using "fastboot oem lock" command.
Make sure you have the right RUU version for your phone before. RUU version must be same or newer than you firmware version. Your phone CID and MID must be compatible for the RUU version you want to use. If you're unsure, post the output of "fastboot getvar all" (hide your imei and serialno before posting).
alray said:
Error 155= You're trying to flash a RUU with an unlocked bootloader. If your phone is S-ON, like yours, you must have a locked or re-locked bootloader to flash a RUU. You can relock the BL using "fastboot oem lock" command.
Make sure you have the right RUU version for your phone before. RUU version must be same or newer than you firmware version. Your phone CID and MID must be compatible for the RUU version you want to use. If you're unsure, post the output of "fastboot getvar all" (hide your imei and serialno before posting).
Click to expand...
Click to collapse
My booloader is relocked
& details
INFOversion: 0.5
INFOversion-bootloader: 1.56.0000
INFOversion-baseband: 4T.24.3218.09 INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: CWS__001
INFObattery-status: good
INFObattery-voltage: 3969mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-c6bbb6d4 INFOhbootpreupdate: 11
INFOgencheckpt: 0 all: Done! finished. total time: 0.047s
& I tried this RUU RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.9.exe
can you figure out what is the problem?
ifty_islam said:
My booloader is relocked
& details
INFOversion: 0.5
INFOversion-bootloader: 1.56.0000
INFOversion-baseband: 4T.24.3218.09 INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: CWS__001
INFObattery-status: good
INFObattery-voltage: 3969mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-c6bbb6d4 INFOhbootpreupdate: 11
INFOgencheckpt: 0 all: Done! finished. total time: 0.047s
& I tried this RUU RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.9.exe
can you figure out what is the problem?
Click to expand...
Click to collapse
You must have at least hboot 1.57 to flash a 7.xx.xxx.x RUU. try to find a 6.xx.502.x or 5.xx.502.x version (must be a signed version since your phone is s-on)
alray said:
You must have at least hboot 1.57 to flash a 7.xx.xxx.x RUU. try to find a 6.xx.502.x or 5.xx.502.x version (must be a signed version since your phone is s-on)
Click to expand...
Click to collapse
Didn't found any 6.xx or 5.xx ruu for M7_UL
if you have time, can you find it for me?
& another question can I upgrade hboot with S-On?