I'm trying to get WiFi tethering working on the root app that allows to set the profile etc... What exact settings work on the HTC first?
Thx
Everything except for Tethering
1chris89 said:
I'm trying to get WiFi tethering working on the root app that allows to set the profile etc... What exact settings work on the HTC first?
Thx
Click to expand...
Click to collapse
Once Unlock Everything except for Tethering...
henry_acevedo said:
Once Unlock Everything except for Tethering...
Click to expand...
Click to collapse
i have problem when i insert any sim card on my phone i lose wifi access
without sim wifi working well
u have any solution by sim wifi using
imeicodes said:
i have problem when i insert any sim card on my phone i lose wifi access
without sim wifi working well
u have any solution by sim wifi using
Click to expand...
Click to collapse
Ruu the device
Sent from my HTC first using XDA Premium 4 mobile app
russian392 said:
Ruu the device
Sent from my HTC first using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i check all version but not work right now running
Android version : 4.1.2
Build version: 1.08.502.1 CL180011 Release-keys
Baseband : 1.15.40.00.13_2_10.64.40.33AL
I have found MEDUSA v1.0 is the least flawed of all the available. It's far from ideal but it is dependable.
CWM and S-OFF your device and give Medusa v1.0 a shot and try out the wicked 7-23 dated 1.728ghz kernel!
No tethering yet but there appears to be a way to mod it to get it to work manually editing files.
1chris89 said:
I have found MEDUSA v1.0 is the least flawed of all the available. It's far from ideal but it is dependable.
CWM and S-OFF your device and give Medusa v1.0 a shot and try out the wicked 7-23 dated 1.728ghz kernel!
No tethering yet but there appears to be a way to mod it to get it to work manually editing files.
Click to expand...
Click to collapse
i checked but not working any other solution i flash that rom which u write up there
any other way or any other modification ?
I have the ATT unlocked version of the First. Rooted, S-off, Wifi tethering app, set to profile wlan0, I think i had to enable one of the checkboxes for reloading wifi-driver or it would stay stuck on or off and wouldn't toggle nicely, but for me the problem was I could connect to the wifi, but get no data through.
Turns out the carrier is blocking all the public DNS servers (so if you knew the actual IP address of a website, you could go there but clicking on virtually any link would get you nowhere since they are associated with additional url's and not IP addresses.
Fix was to uncheck the box on my laptop that says automatically retrieve DNS settings and manually set the preferred DNS server to whatever your phone uses (which there are apps on the marketplace that display the information). Make sure when getting your phones DNS info you are using the cellular connection and not the wifi. If you are tethering from mobile device to another, say a tablet then you'll need another app (for said tablet) that lets you change the devices DNS settings (not sure but that might also require root).
I just noticed that the wifi tether app i am using also has DNS settings but I haven't messed with that.
The app I used to get my carriers DNS was CompruebaIP
hopes this help, I found this on some obscure forum post after hours of searching and it solved my problem.
Wifi tether - telephony.db files
Not sure if this will help.
I created two telephony.db files which can be renamed-pasted to /data/data/com.android.providers.telephony/databases
Should eliminate the wifi tether check. Attached is the zip.
Make sure:
1. Get a backup copy of your current telephony.db
2. You rename the replacement file you use to telephony.db before copying.
3. Phone is rooted.
Also please let me know if this helps
regards,
snath83
Hi All,
I bought a Sony Z1 C6903 in HUNGARY, and refresh in OTA my software (4.4.4 to 5.0.1), BUT my IMEI and other ID's missing (wifi MAC, bluetooth, etc.) now. *#06# show this: IMEI null.
My asset tag show this info:
Model: C6903 14W29 CB5
S/N: BH915NP00D SI 1287-5259
I searched this CDA for days, but nothing... Please somebody help me, I near the madness.
I tried to change the ROMs with Sony Mobile Flash Tool, but nothing usable... again..
Sony PC Companion repair function didn't work for me, still IMEI null.
Thanks all of help!
Hey there,
Have you tried to falsh modem.zip at http://d-h.st/a9X?
Hit thanks if this has worked !!
Hi Guys,
as i dived deep into the Sony Stock Rom the last weeks i found a bug. This bug is causing that you dont get a data connection when you are in another contry, or it connects-disconnects-connects and so on. It´s a littlle bit funny because in the build.prop there are two identical entries for data romanig, one said data roaming true and the other one says false. So if you have a rooted phone you can fix this by youself.
1. Install a build.prop editor
2. search for "ro.com.android.dataroaming" you will find two entries for this
3. delete the one with "flase" as value
4. restart your device
From now on you get your mobile connection as usuall. This was testet today by myself with one Z3+ (single sim) and two Z5 (single sim) devices. With moddified build.prop you get the connection, with stock not. Yesterday when i found the bug i downloaded two ftf files from sony for Z3+ (32.2.A.0.224+32.2.A.0.253] and the 224 for the Z5. In all the build.prop files its the same so this issue should/could be on alle kitakami devices.
Thanks for the post!
And nice work on your debloated ROM
http://forum.xda-developers.com/xperia-z4/development/rom-superslim-stock224v1-0-t3413919
i have sony z1 c6903 android 5.1
Click to expand...
Click to collapse
i bought it used
but there a prob i cant connect wifi network
when i type the correct password it said saved
but never connect .
i have sony t2 ultra and it connects very well on my router
i need help
ghrfear said:
i bought it used
but there a prob i cant connect wifi network
when i type the correct password it said saved
but never connect .
i have sony t2 ultra and it connects very well on my router
i need help
Click to expand...
Click to collapse
Hello,
Which firmware is your device running?
Did you toggle advanced settings of WiFi?
-Vatsal
5.0.2
i did everything u can imagine
@Vatsal
flash the original firmware of your region again this will solve your problem.
To use volte in unreleased countries where Sony has not released the product, unlock and magisk must be used regardless of firmware.
There is no menu to use VOLTE, but you can force it by modifying the build prop. After that, you can open the Qualcomm Diagnostic Port (qpst, EFS Explorer) and replace the EFS file to use VOLTE.
Unlike xperia 1&5, the corresponding adb shell-su (setprop sys.usb.config rndis,eng_mode,adb) does not work on xperia 1 ii. I'm frustrated. Is the build prop USB item wrong? Does anyone know of a command to activate the Qualcomm Diagnostic Port? :crying:
htcmage said:
To use volte in unreleased countries where Sony has not released the product, unlock and magisk must be used regardless of firmware.
There is no menu to use VOLTE, but you can force it by modifying the build prop. After that, you can open the Qualcomm Diagnostic Port (qpst, EFS Explorer) and replace the EFS file to use VOLTE.
Unlike xperia 1&5, the corresponding adb shell-su (setprop sys.usb.config rndis,eng_mode,adb) does not work on xperia 1 ii. I'm frustrated. Is the build prop USB item wrong? Does anyone know of a command to activate the Qualcomm Diagnostic Port? :crying:
Click to expand...
Click to collapse
Hello there,
I was tried to run init.qcom.usb.sh script under /system/vendor/bin folder, then unplug and re-plug USB, then run setprop persist.usb.eng 1 (under SU)...
OMG... got many devices and ports opened but don't take any drivers... please try by yourself... let me know the result.... as well there is init.qti.ims.sh that may related with IMS service
Regards
xe
htcmage said:
To use volte in unreleased countries where Sony has not released the product, unlock and magisk must be used regardless of firmware.
There is no menu to use VOLTE, but you can force it by modifying the build prop. After that, you can open the Qualcomm Diagnostic Port (qpst, EFS Explorer) and replace the EFS file to use VOLTE.
Unlike xperia 1&5, the corresponding adb shell-su (setprop sys.usb.config rndis,eng_mode,adb) does not work on xperia 1 ii. I'm frustrated. Is the build prop USB item wrong? Does anyone know of a command to activate the Qualcomm Diagnostic Port? :crying:
Click to expand...
Click to collapse
Before trying to modify everything, find out what modem config file your phone is using for your service provider. Type *#*#service#*#* in the phone screen and choose service info. Then choose software info. It should list at the bottom what your current modem config file is.
You need this information in order for you to figure out what settings need to be changed.
bentree said:
Before trying to modify everything, find out what modem config file your phone is using for your service provider. Type *#*#service#*#* in the phone screen and choose service info. Then choose software info. It should list at the bottom what your current modem config file is.
You need this information in order for you to figure out what settings need to be changed.
Click to expand...
Click to collapse
Seems to me, IMS service is not running on any firmware customization, as modem config is always shown as: ROW_Commercial, even tried to modify modem.conf file, apns-conf.xml.
Not sure, is it a bug or something intentionally left buggy to let us busy and makes Xperia 1 II more interesting to be customized ::lol::
xe
xori.eng said:
Seems to me, IMS service is not running on any firmware customization, as modem config is always shown as: ROW_Commercial, even tried to modify modem.conf file, apns-conf.xml.
Not sure, is it a bug or something intentionally left buggy to let us busy and makes Xperia 1 II more interesting to be customized ::lol::
xe
Click to expand...
Click to collapse
Haha maybe you could be right At the moment mine doesn't even know what modem config file to use.
bentree said:
Haha maybe you could be right At the moment mine doesn't even know what modem config file to use.
Click to expand...
Click to collapse
I think you didn't put any SIM card on your phone, so you don't have any modem there...
xe
xori.eng said:
I think you didn't put any SIM card on your phone, so you don't have any modem there...
xe
Click to expand...
Click to collapse
Incorrect, Sim card is installed and working.
xori.eng said:
tried to modify modem.conf file
Click to expand...
Click to collapse
Which string was written in modem.conf (edit: before you changed it)?
@htcmage It was much easier to modify modem.conf on XZ1 than the 'Qualcomm Diagnostic Port (qpst, EFS Explorer)' way.
You have to find the schema like this:
"[GUIDE] Enable VoLTE for your non operator handset" https://forum.xda-developers.com/xp.../guide-enable-volte-operator-handset-t3816565
SGH-i200 said:
Which string is written in modem.conf? It was much easier to modify this file on XZ1 than the 'Qualcomm Diagnostic Port (qpst, EFS Explorer)' way.
"[GUIDE] Enable VoLTE for your non operator handset" https://forum.xda-developers.com/xp.../guide-enable-volte-operator-handset-t3816565
Click to expand...
Click to collapse
Tried to write as ir51_92, mcfg_sw/generic/test/ir51_92/vlvw/GTE/mcfg_sw.mbn or any others resulting no change on loaded modem: ROW_Commercial always...
Regards,
xe
https://forum.xda-developers.com/sony-xperia-1-II/how-to/volte-success-activation-firmware-t4144701
My writing. Please refer to the post you left in the comments! The volte solution is This method is applied even if you do a Li-lock (however, it is applicable even in a Southeast Asian firmware version with volte menu).
Try to see if you can find the Dutch (T-Mobile) modem software (or firmware) and if you can flash it.
I'm with T-Mobile here in the netherlands and have VoLTE activated
htcmage said:
R
Click to expand...
Click to collapse
FantasticBeast007 said:
Hi Guys
I am based in India. I just flashed my XQ-AT52 with customized SEA firmware and now I have Volte+5G
You can give it a try.
Click to expand...
Click to collapse
Hi, i am using xperia 5ii, i am also from india, i flashed XQ-AS72_Customized SEA_58.1.A.5.222A. for me not showing volte, my service provider is Vi, what's your service provider?
jamshadinho said:
Hi, i am using xperia 5ii, i am also from india, i flashed XQ-AS72_Customized SEA_58.1.A.5.222A. for me not showing volte, my service provider is Vi, what's your service provider?
Click to expand...
Click to collapse
Please ignore
I was facing battery drain issue after this change
So i reverted to HK version and
Don't flash with SEA firmware.
I removed my post
Has anyone been able to figure this out yet?
I have Volte working by using SEA firmware however wifi calling does not work.
Has anyone found a work around for this problem?
I'm In UAE and using Xperia 5 ii SOGO2.
khalilrehman17 said:
I'm In UAE and using Xperia 5 ii SOGO2. View attachment 5930807View attachment 5930809
Click to expand...
Click to collapse
Those pictures provide no proof of working volte or wifi calling.
Thread cleaned! Reminder to read and follow the XDA Forum Rules to avoid breaking them! Continuous violations will lead to warnings, followed by infractions and a ban.
Regards,
theimpulson