Hello,
Is there anyway to get Autoremote to work directly with the Note 3 over bluetooth and not require internet? I'm sure I"m missing something? thanks.
You need internet first to register device in autoremote
After that, you only need standard Bluetooth connection to send commands
@Brendo my bluetooth autoremote seems to work fine.
However if I try to send a notification (not a quick message) via bluetooth it doesn't seem to get received on the gear
Please try and let me know if you can send and receive a NOTIFICATION thanks
Sent from my GT-N7100 using Tapatalk
kashortiexda said:
@Brendo my bluetooth autoremote seems to work fine.
However if I try to send a notification (not a quick message) via bluetooth it doesn't seem to get received on the gear
Please try and let me know if you can send and receive a NOTIFICATION thanks
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Stock notifications aren't available on the gear. You can get the pull down bar in null rom, but even then I don't think it works with all apps. I've not tested though. If you mean the notifications like standard way that gear manager sends notifications, we really need an sdk to work out how to utilize that (there are workarounds where some apps used existing channels)
Brendo said:
Stock notifications aren't available on the gear. You can get the pull down bar in null rom, but even then I don't think it works with all apps. I've not tested though. If you mean the notifications like standard way that gear manager sends notifications, we really need an sdk to work out how to utilize that (there are workarounds where some apps used existing channels)
Click to expand...
Click to collapse
No, perhaps you misunderstood,
if you go into the autoremote app and select "devices" then there is a small envelope on the right as well as a triangle - these are used to send quick messages and notifications ( by autoremote app )
I can send the message, but not the notification by bluetooth..... however notificatio does work fine by wifi and it gets received by the gear no problem
kashortiexda said:
No, perhaps you misunderstood,
if you go into the autoremote app and select "devices" then there is a small envelope on the right as well as a triangle - these are used to send quick messages and notifications ( by autoremote app )
I can send the message, but not the notification by bluetooth..... however notificatio does work fine by wifi and it gets received by the gear no problem
Click to expand...
Click to collapse
I understand now. I had a look sending notification via plugin in tasker - which is the same, but didn't realise how notification was sent. Sounds like message uses direct Bluetooth where as notification routes through wifi. Sounds like you'll need to check with dev (may be a bug or unfinished since Bluetooth is recent addition to app?)
I ve got the same problème when i has was in theter i Can send command but without theter the command don t work.
Can you help me?
Sent from my HTC One using xda app-developers app
Thank you. I thought I was the only one not able to get this working. I've trying for a week now and everything I found made me feel like I was doing something wrong.
The one thing I've noticed is that when you click and hold the device, and the menu comes up, when I select "connect Bluetooth device, it will say it is connected. But, right after that, it says "not a valid QR code". So I've been wondering if that has anything to do with it.
Anybody else seen this?
Sent from my SPH-L720 using Tapatalk
triplerider said:
Thank you. I thought I was the only one not able to get this working. I've trying for a week now and everything I found made me feel like I was doing something wrong.
The one thing I've noticed is that when you click and hold the device, and the menu comes up, when I select "connect Bluetooth device, it will say it is connected. But, right after that, it says "not a valid QR code". So I've been wondering if that has anything to do with it.
Anybody else seen this?
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
It DOES work, you have to create a Tasker profile and task, search this or the other thread for it.
Everything works except notification by bluetooth (for me ) - I will let Joao know
kashortiexda said:
It DOES work, you have to create a Tasker profile and task, search this or the other thread for it.
Everything works except notification by bluetooth (for me ) - I will let Joao know
Click to expand...
Click to collapse
Quick message don t work for me if i am not tether.
How thread Are you talk?
Sent from my HTC One using xda app-developers app
kashortiexda said:
It DOES work, you have to create a Tasker profile and task, search this or the other thread for it.
Everything works except notification by bluetooth (for me ) - I will let Joao know
Click to expand...
Click to collapse
Ok, regarding the tasker task, does this need to be included in every task? What I mean is, I've already got some autoremote tasks that work when tethered. I want to be able to use them via BT when I'm not on Wifi (that's the only way my tether works).
triplerider said:
Ok, regarding the tasker task, does this need to be included in every task? What I mean is, I've already got some autoremote tasks that work when tethered. I want to be able to use them via BT when I'm not on Wifi (that's the only way my tether works).
Click to expand...
Click to collapse
No
Just add 1 profile on the phone state "connected to Gear" .... with associated task, plugins autoremote bluetooth "on"
Also on the gear in tasker
add 1 profile on the Gear ....state "connected to XXphone" .... with associated task , plugins autoremote bluetooth "on"
kashortiexda said:
No
Just add 1 profile on the phone state "connected to Gear" .... with associated task, plugins autoremote bluetooth "on"
Also on the gear in tasker
add 1 profile on the Gear ....state "connected to XXphone" .... with associated task , plugins autoremote bluetooth "on"
Click to expand...
Click to collapse
I've done this and it still doesn't work. Still getting "retrying 1/5" etc. I'm starting to think I must have some other BT connection issue because I've been trying to get the BT GPS sharing working again. It worked a few null roms back but seems to be broken now. I've searched all over the phone and the gear but can't find anything that would be blocking certain BT functions. Everything else works between the phone and the gear (notifications, weather, mini gallery, pedometer backup).
is bluetooth on in autoremote app
triplerider said:
I've done this and it still doesn't work. Still getting "retrying 1/5" etc. I'm starting to think I must have some other BT connection issue because I've been trying to get the BT GPS sharing working again. It worked a few null roms back but seems to be broken now. I've searched all over the phone and the gear but can't find anything that would be blocking certain BT functions. Everything else works between the phone and the gear (notifications, weather, mini gallery, pedometer backup).
Click to expand...
Click to collapse
I assume you have done the below, but repeating it for others too....
In Autoremote, on the devices tab, click on the bluetooth icon of each paired autoremote device to switch ON, and turn wifi off ( assume you have already long pressed and "add as Bluetooth device )
If ON, the icon is blue, if off grey
kashortiexda said:
I assume you have done the below, but repeating it for others too....
In Autoremote, on the devices tab, click on the bluetooth icon of each paired autoremote device to switch ON, and turn wifi off ( assume you have already long pressed and "add as Bluetooth device )
If ON, the icon is blue, if off grey
Click to expand...
Click to collapse
Yep, tried it multiple ways. Like I said, I think I've got some other connection issue. I even tried the Smart Remote app from the gear store and haven't ever been able to get it to connect either. At first I thought it was due to the null rom but others have said it works for them.
I just have no idea what would allow "selective" connections.
Edit: I just noticed that on the phone, in tasker, it shows as an active profile but in the gear it does not. I even set up a generic profile just to pop up a notification. If I test the action it works but the profile still shows as inactive and in the notification panel it still shows "no active profiles" yet all other functions continue to work. Can someone confirm if this is the same on their gear?
triplerider said:
Yep, tried it multiple ways. Like I said, I think I've got some other connection issue. I even tried the Smart Remote app from the gear store and haven't ever been able to get it to connect either. At first I thought it was due to the null rom but others have said it works for them.
I just have no idea what would allow "selective" connections.
Edit: I just noticed that on the phone, in tasker, it shows as an active profile but in the gear it does not. I even set up a generic profile just to pop up a notification. If I test the action it works but the profile still shows as inactive and in the notification panel it still shows "no active profiles" yet all other functions continue to work. Can someone confirm if this is the same on their gear?
Click to expand...
Click to collapse
I had the same, initially, it took some time on the Gera with Tasker.
Try switch profile off, then on, save reboot, reconnect and have patience.
Instead of connecting to a "named" connection, leave that bank and choose the optional "bluetooth address" in taker profile state
triplerider said:
Yep, tried it multiple ways. Like I said, I think I've got some other connection issue. I even tried the Smart Remote app from the gear store and haven't ever been able to get it to connect either. At first I thought it was due to the null rom but others have said it works for them.
I just have no idea what would allow "selective" connections.
Edit: I just noticed that on the phone, in tasker, it shows as an active profile but in the gear it does not. I even set up a generic profile just to pop up a notification. If I test the action it works but the profile still shows as inactive and in the notification panel it still shows "no active profiles" yet all other functions continue to work. Can someone confirm if this is the same on their gear?
Click to expand...
Click to collapse
Try to make a new task(for example when screen is on) ,action plugin autoremote Bluetooth connections and activate it.
On your phone and your gear.
It s work for me.
Sent from my HTC One using xda app-developers app
Connection Lost
I use autoremote on the gear over bluetooth and it work well with my note 3.
I have tasker which enable bluetooth in gear and note 3 when they connect them in bluetooth.
It work great until the watch goes in deep sleep. At this time the connection is broken until I reboot. I try to enable persistent notification on the gear when tasker enable autoremote bluetooth (to prevent the service to be killed) but at this time I have another problem, the gear and the phone are not able to go in deep sleep so I have a big battery drain.
If someone have ideas to help I'll be very glad.
silvermick27 said:
Try to make a new task(for example when screen is on) ,action plugin autoremote Bluetooth connections and activate it.
On your phone and your gear.
It s work for me.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I rebooted both phone and gear and the first try was successful. Next attempt back to trying. One thing I noticed was that upon restart both taskers showed the Bluetooth profile as active. After the first test the tasker on my phone now shows inactive. Prior to restart it was the gear that showed inactive.
Either way, this is progress. Now to find out why they aren't staying active.
Sent from my SPH-L720 using Tapatalk
After series of reboots in various orders, this is finally working. Now that it is, I can even say it's much faster than while tethered.
Now I can't wait to get my home automation setup and working. To control it all from the watch is going to be awesome.
Thanks everybody for your support and ideas.
Sent from my SPH-L720 using Tapatalk
Hi,
I am having a major issue with Marshmallow 6.0.1 on my Rooted N910T and it's driving me nuts! I'm totally new to MM and I have no idea how to handle this, or if it even can be handled.
This is a new phone for me, that was fresh and I updated to MM using Samsung's ROM, Rooted it and have PhilZ Recoveey on it.
After I install apps that need access to my Storage (or some other things), like for example "OfficeSuite Pro", which needs access to my Storage, a message pops up when I open the app, telling me it needs that access. So I tap "Allow".
Then another message comes up that says; "Screen Overlay Detected" and it tells me that I have to turn it Off. So I tap "Open Settings".
Then it takes me to a list of apps that each have an On/Off switch and it says; "Apps that can appear on top" at the top of that screen.. And sometimes I can move the switch, sometimes I can't. But whether it's already in the right position, or I can move it there (and I've tried both settings) makes no difference.
I.e., it still does the same thing when I go into the apps and so in this example, I still can't access my documents.
May I please humbly request, does anyone have any idea what's going on here and how to hopefully fix it? I would be so amazingly grateful!!!
Thank You!
Zeuszoos said:
Hi,
I am having a major issue with Marshmallow 6.0.1 on my Rooted N910T and it's driving me nuts! I'm totally new to MM and I have no idea how to handle this, or if it even can be handled.
This is a new phone for me, that was fresh and I updated to MM using Samsung's ROM, Rooted it and have PhilZ Recoveey on it.
After I install apps that need access to my Storage (or some other things), like for example "OfficeSuite Pro", which needs access to my Storage, a message pops up when I open the app, telling me it needs that access. So I tap "Allow".
Then another message comes up that says; "Screen Overlay Detected" and it tells me that I have to turn it Off. So I tap "Open Settings".
Then it takes me to a list of apps that each have an On/Off switch and it says; "Apps that can appear on top" at the top of that screen.. And sometimes I can move the switch, sometimes I can't. But whether it's already in the right position, or I can move it there (and I've tried both settings) makes no difference.
I.e., it still does the same thing when I go into the apps and so in this example, I still can't access my documents.
May I please humbly request, does anyone have any idea what's going on here and how to hopefully fix it? I would be so amazingly grateful!!!
Thank You!
Click to expand...
Click to collapse
If you have a screen color changing app like Twilight or F.lux running, pause it and run whatever you want without overlay bother. When you're done with your app, resume your color changing app.
Sent from my SM-N910T using Tapatalk
Zeuszoos said:
Hi,
I am having a major issue with Marshmallow 6.0.1 on my Rooted N910T and it's driving me nuts! I'm totally new to MM and I have no idea how to handle this, or if it even can be handled.
This is a new phone for me, that was fresh and I updated to MM using Samsung's ROM, Rooted it and have PhilZ Recoveey on it.
After I install apps that need access to my Storage (or some other things), like for example "OfficeSuite Pro", which needs access to my Storage, a message pops up when I open the app, telling me it needs that access. So I tap "Allow".
Then another message comes up that says; "Screen Overlay Detected" and it tells me that I have to turn it Off. So I tap "Open Settings".
Then it takes me to a list of apps that each have an On/Off switch and it says; "Apps that can appear on top" at the top of that screen.. And sometimes I can move the switch, sometimes I can't. But whether it's already in the right position, or I can move it there (and I've tried both settings) makes no difference.
I.e., it still does the same thing when I go into the apps and so in this example, I still can't access my documents.
May I please humbly request, does anyone have any idea what's going on here and how to hopefully fix it? I would be so amazingly grateful!!!
Thank You!
Click to expand...
Click to collapse
If you have root+xposed installed you can grab ( disable screen overlay warning ) module and activate it. You can get rid of it permanently.
Trex888 said:
If you have root+xposed installed you can grab ( disable screen overlay warning ) module and activate it. You can get rid of it permanently.
Click to expand...
Click to collapse
.
I have "pure" stock ROM with same problem. Any known remedy?
9Michael9 said:
.
I have "pure" stock ROM with same problem. Any known remedy?
Click to expand...
Click to collapse
go to settings / application manager / 3 dot menu and choose apps that can appear on top
turn everything off,
happened to me with the 1st and 2nd marshmellow roms,..
ignore
Trex888,
I just installed the Xposed Mod you suggested. If it works for me, then dude, you are the man as far as I'm concerned!
Thanks!
Trex888 said:
If you have root+xposed installed you can grab ( disable screen overlay warning ) module and activate it. You can get rid of it permanently.
Click to expand...
Click to collapse
I installed it and it does work! Have not had one issue with the "Screen Overlay" warning popping up at all.
Thank You, Sir Trexx!
TTYL
I have this problem that when I want to activate an accessibility service, I get a pop up message that says if there is an overlapping app blocking the options I should drag it away or close the app, as in the screenshot attached. I have no idea what is causing this but I have not been able to activate any accessibility services since upgrading to MIUI version 10.2. The device is rooted with magisk. Any help will be appreciated to get this sorted out. I get the Pop-Up each time I tap ok.
sofene said:
I have this problem that when I want to activate an accessibility service, I get a pop up message that says if there is an overlapping app blocking the options I should drag it away or close the app, as in the screenshot attached. I have no idea what is causing this but I have not been able to activate any accessibility services since upgrading to MIUI version 10.2. The device is rooted with magisk. Any help will be appreciated to get this sorted out. I get the Pop-Up each time I tap ok.
Click to expand...
Click to collapse
Turn off full screen gestures, this is blocking the Accessibility settings.
After you have enabled the Accessibility stuff, I believe you can turn on full screen gestures again.
cobben said:
Turn off full screen gestures, this is blocking the Accessibility settings.
After you have enabled the Accessibility stuff, I believe you can turn on full screen gestures again.
Click to expand...
Click to collapse
Wow! You are a miracle worker, thank you so much. Worked like a charm.
sofene said:
Wow! You are a miracle worker, thank you so much. Worked like a charm.
Click to expand...
Click to collapse
You're welcome.
Actually I had the same problem in Februari on my Mi Note 2 (I have a Mix1 also, they are very closely related as to firmware).
After trying everything I could think of, and nothing helped, I sat back and thought "what else draws over other apps"?
Bingo! Gestures.
And it worked.
Hi,
I'm having some issues using edXposed on Android 11. As soon as I enable a module I can't open Chrome without it closing a few seconds later. The Google app works fine.
If I disable the modules chrome runs without a problem.
I have three modules enabled: edXposed manager, FingerFace and Exi for SwiftKey and it doesn't matter whether just one or all are enabled.
I've tried adding chrome to the blacklist and I've enabled "pass safetynet" but still nothing.
Any suggestions to what I should do?
Peter
I'm not having any issues, so I can't test this myself... but I heard about people turning off "Chrome Custom Tabs" in the Settings. Reading what it does, it doesn't make sense as to why it would cause an issue... but it doesn't hurt to try.
jljtgr said:
I'm not having any issues, so I can't test this myself... but I heard about people turning off "Chrome Custom Tabs" in the Settings. Reading what it does, it doesn't make sense as to why it would cause an issue... but it doesn't hurt to try.
Click to expand...
Click to collapse
Thanks. Unfortunately it didn't work. It's very strange - now it worked for a period of about 12 hours and then it stopped working again. No changes, no reboot.
You have to turn off app list mode in exposed for Chrome to work normally.