Hi team,
Bottom part of touch is not working for clicking on button. I am very disappointing with that. Any help please.
Thanks
Nitin Jain
jainnitin10 said:
Hi team,
Bottom part of touch is not working for clicking on button. I am very disappointing with that. Any help please.
Thanks
Nitin Jain
Click to expand...
Click to collapse
Open dealer and type *#*#197328640#*#* or *#*#7378423#*#* to open Service Menu.
Test to your touch screen, if everything is ok, the problem is being caused by third party app
bottom of touch is not working
Not able to understand the reply. What I need to do?
Please elaborate.
Thanks
Nitin
FSadino said:
Open dealer and type *#*#197328640#*#* or *#*#7378423#*#* to open Service Menu.
Test to your touch screen, if everything is ok, the problem is being caused by third party app
Click to expand...
Click to collapse
Related
Goodmorning to all of you...
I'm having a question..I have a compact IV now for a couple of weeks which is now fully customized with an original stock ROM from HTC but since a few days i'm not able to zoom with Opera..
what I mean is that when I search for a mobile website, it will open, but I can't zoom in or out with tapping on the screen...I already looked into the settings and that should be ok..the mobile view option is enabled...
I'm also using Advanced Config..had that something to do with this??
I hope somebody could help me with this, maybe i'm not the only one with this problem!
Thanxx everybody in advance
Jeroen
is there somebody who can help me with this???
not just you
i can't use it too !
Have you tried a soft reset?
Mostly when I have a problem this is solved by a soft reset.
Also turning off and on wil help often to problems that occur after some time.
Grtzzz
Can you zoom by using the "wheel"? I mean by using a circular motion with your finger around the center button?
TomInMB said:
Can you zoom by using the "wheel"? I mean by using a circular motion with your finger around the center button?
Click to expand...
Click to collapse
No, i'm not even able to use the wheel.. and a soft reset also doesn't work either.. also some text on the right hand side of the screen isn't aligned..maybe I can make a screenshot of it...
Which rom do you use? This might be the problem.
Remember when it worked for the last time?
If yes think about what you did after.
Maybe you installed a program which causes this.
Try to uninstall the program or programs if you did.
When you installed more then one delete one after each other and remember which program did make the problem to your browser and post it here.
Grtzzz
here's a screenshot:
baraata said:
Which rom do you use? This might be the problem.
Remember when it worked for the last time?
If yes think about what you did after.
Maybe you installed a program which causes this.
Try to uninstall the program or programs if you did.
When you installed more then one delete one after each other and remember which program did make the problem to your browser and post it here.
Grtzzz
Click to expand...
Click to collapse
at this moment i'm using the original HTC stock rom v1.37 Europe edition, i've installed Advanced Config and that's all....i might try another hard reset but I would prefer another method to get rid of this annoying problem...
1.37
Why not go to 1.93 its much faster and smoother.
This might also solve your problem.
Grtzzz
Pirtje...as for the text overflowing on right side...Opera sometimes does not reposition text that are in tables of more than one cell (and possibly other times as well). If those items are in a table, that is most likely the cause.
TomInMB said:
Pirtje...as for the text overflowing on right side...Opera sometimes does not reposition text that are in tables of more than one cell (and possibly other times as well). If those items are in a table, that is most likely the cause.
Click to expand...
Click to collapse
allright I didn't knew that.. thanxx for your reaction!
baraata said:
1.37
Why not go to 1.93 its much faster and smoother.
This might also solve your problem.
Grtzzz
Click to expand...
Click to collapse
I might do that later...because I don't have an version which I can use, because I have a mda Compact IV which is Hard spl-ed 1.40 but can't upgrade to 1.93..
at least...don't know how to manage that...
Check that you have not got a tick in the 'mobile view' in settings. You can't zoom when that is checked.
nokmond said:
Check that you have not got a tick in the 'mobile view' in settings. You can't zoom when that is checked.
Click to expand...
Click to collapse
Man UR amazing!!! that did it!! now it's working again for me!! thank you soo much!!
SOLVED!!
Can a mod change this thread as solved???
can I also do that myself??
Greetzzz Jeroen
Pietje_1985 said:
Man UR amazing!!! that did it!! now it's working again for me!! thank you soo much!!
Click to expand...
Click to collapse
Your welcome.
Pietje_1985 said:
Man UR amazing!!! that did it!! now it's working again for me!! thank you soo much!!
Click to expand...
Click to collapse
I have the same problem and I'm sure, first it was possible to zoom in mobile view for me. When I zoomed in this mode the site zoomed in and text was broken to the new format after a few seconds. Now it is in fact only possible without mobile view, but this is not very usefull for me, because text is will not be reformated in this mode. Don't know what happend.
first uncheck the mobile view box......and then anywhere on the website double tap the screen and this will zoom in automatically and then start using the wheel to zoom in or out etc....this will auto format the text to fit the screen......the catch is to "double tap" on the screen first before using the scroll wheel otherwise the scroll wheel will not auto format the text to fit the screen......
irv777 said:
first uncheck the mobile view box......and then anywhere on the website double tap the screen and this will zoom in automatically and then start using the wheel to zoom in or out etc....this will auto format the text to fit the screen......the catch is to "double tap" on the screen first before using the scroll wheel otherwise the scroll wheel will not auto format the text to fit the screen......
Click to expand...
Click to collapse
Perfect - this works!
Hi guys.
Over in the Touch HD thread, some people managed to install the X1 camera onto the Touch HD, but as the HD does not have the camera button, it fails to shot actual pictures.
Could someone with both an X1 and program AEButton please use the latter to find the hardware button code for the camera button?
Just File->Add button, press the camera button and write down the info. No need to continue, you can cancel, as you do not really need the button.
We'd like the code for both the half-press and the full press please.
Thanks
Hi cybermaus.
The code for the half-pressed button is "00C5" and the one for the completely pressed button is "00C1".
-16-
Thanks.
Based on you input, I was able to make a mapping program, and was able to make a picture with the Xperia camera software on the Touch HD device. See here
But image settings are not good. We probably need to import the registry settings.
Could you or someone export the entire "HKLM/software/sony ericsson/camera" registry key?
If you do not have a registry program that can export, using this free oneyou can do it easily from Windows through ActiveSync.
Thanks
cybermaus said:
Thanks.
Based on you input, I was able to make a mapping program, and was able to make a picture with the Xperia camera software on the Touch HD device. See here
But image settings are not good. We probably need to import the registry settings.
Could you or someone export the entire "HKLM/software/sony ericsson/camera" registry key?
If you do not have a registry program that can export, using this free oneyou can do it easily from Windows through ActiveSync.
Thanks
Click to expand...
Click to collapse
You can take the picture with the enter key as well. Here is the camera registry settings
Paitor said:
You can take the picture with the enter key as well.
Click to expand...
Click to collapse
*Now* you tell me...
Paitor said:
Here is the camera registry settings
Click to expand...
Click to collapse
Thanks
cybermaus said:
*Now* you tell me...
Thanks
Click to expand...
Click to collapse
Hehe, thats how it goes when you ask the wrong questions
please i have a problem now
when i press the camera button my xperia x1 open the camera but after that neither the button focus nor shoot and i cant take pictures except by touch pad key ?
how to restore the button to work as it was ?
BTW , i have setup R3A for camera with Autoflash and Geotagging ! do you think this is what made the problem ?
Hey there, kinda new and this is my first windows mobile phone so I am kinda new on this and this is also my first HTC. Got a few questions, hopefully anyone can spare some thoughts or solution on my questions.
1. From Settings > Communications > Phone; under the header [PIN/PIN2]. What is the PIN CODE? I looked into the manual and couldnt find it. So I only have 1 attempt left....
I tried Settings > All Settings > Personal Tab> Lock; and setup my own password for this already but doesnt seem to correspond with the PIN above.
Are the both the same thing or different functions?
2. Settings > All Settings > Personal Tab> Buttons; Seems the only option is Button 1 in the box and no other options? I am trying to figure out how to add or use another button like the holding the call button to silence/vibrate the phone.
Hope anyone can shed a light on this. Device is still new and there might more silly questions I have. gawd.
Cheers!
The PIN CODE is the password you need to type in when you startup yout phone(actually its the password to read your simcard)..
When you bought your SIM card you got a PIN, PIN2, PUK and PUK2 code..
lg nikolaus
thx for the info, but I guess i try once I get a new sim.
I rmb ppl mention there is the Magic 8 Ball on diamond 2 but I dont see it. Any clarification on this?
Answer to question 2: you can configure a lot more button actions, but you will need software like AE button plus for that.
deechte said:
Answer to question 2: you can configure a lot more button actions, but you will need software like AE button plus for that.
Click to expand...
Click to collapse
cool! I give it a try
Cheers mate!
for some reason, AEBplus doenst work on the diamond2 when assigning the back button
Oh yes it does! In this thread I've explained how. It's no magic, it just works.
deechte said:
Oh yes it does! In this thread I've explained how. It's no magic, it just works.
Click to expand...
Click to collapse
vet cool! i mean awesome, i manually added the back button, but i guess the OK button is fine! thanks
Vet cool it is indeed!
Hi All ,
Just a little request to know if somebody knows how to hide automatically the dial PAD when launching the Phone app
Because I never use it and I prefer to directly access to phone history.
Somebody can help me?
Thanks!
Kinoal said:
Hi All ,
Just a little request to know if somebody knows how to hide automatically the dial PAD when launching the Phone app
Because I never use it and I prefer to directly access to phone history.
Somebody can help me?
Thanks!
Click to expand...
Click to collapse
Nobody?
dont you just click the bottom left button? i mean its only one button away...
LitoNi said:
dont you just click the bottom left button? i mean its only one button away...
Click to expand...
Click to collapse
Yes there is a button but I just want to not need to push each time Because I'm mostly don't use my dial pad
i would love this function... but couldn't find anywhere
in dialer, press the following and wait, dont press call after the last digit
USE AT YOUR OWN RISK
*#2663# is touch firmware menu
please inform me if you find any more
*#0*# is function and hardware test thanks to sasadara
×#0228# battery stats info thanks to vaishnavashok
*#0283# That's to test weather your mic and speaker work. Enable it. Talk into your watch and it will play back your voice thanks to sasadara
*#663# won't work for me.. Op, Add this too *#0283# (but i don't know what it is )
sasadara said:
*#663# won't work for me.. Op, Add this too *#0283# (but i don't know what it is )
Click to expand...
Click to collapse
My bad il edit op now. It's *#2663#
IF SOMEONE HELPS YOU. OR YOU USE THEIR WORK. DONT BE LAZY. HIT THE "THANKS" BUTTON.
Add above *#0283# code too..
sasadara said:
*#663# won't work for me.. Op, Add this too *#0283# (but i don't know what it is )
Click to expand...
Click to collapse
That's to test weather your mic and speaker work. Enable it. Talk into your watch and it will play back your voice
IF SOMEONE HELPS YOU. OR YOU USE THEIR WORK. DONT BE LAZY. HIT THE "THANKS" BUTTON.
*#0*# -> vibration -> sex toy
alexpu1u said:
*#0*# -> vibration -> sex toy
Click to expand...
Click to collapse
lol...... -_- priceless. Had a laugh.
gav83collins said:
in dialer, press the following and wait, dont press call after the last digit
USE AT YOUR OWN RISK
*#2663# is touch firmware menu
please inform me if you find any more
*#0*# is function and hardware test thanks to sasadara
×#0228# battery stats info thanks to vaishnavashok
*#0283# That's to test weather your mic and speaker work. Enable it. Talk into your watch and it will play back your voice thanks to sasadara
Click to expand...
Click to collapse
add *#9900# ?