Noob question...
Do i need to install odex rom first then deodex over top via cwm for similar..
Can somebody help me to install iHackers V2.1 over my stock 14.2.A.1.136.
I dont have unlocked bootloared and root.
I need fast replay.
Rooting on the newest version of Android 4.3.3 isn't impossible on the Xperia Z1, it just takes you more steps than normal to actually get full root access. I have a locked bootloader as well but I was able to get a rooted version of Android 4.3.3, specifically the iHackers 2.1 ROM running Android 4.3.3 with full root access. Here's how I got full root access on the iHackers 2.1 ROM:
1) Download the .ftf file named C6903 14.1.G.1.534 Global 1277-2880_R4A or the one provided by NUT from the compiled FTF thread at this link: http://forum.xda-developers.com/showthread.php?t=2469191
This is a version of the original Stock Rom that the VROOT program will actually work on when trying to ROOT your phone.
2) Flash the ROM you downloaded using Flashtool (steps on how you can go about doing that should be in the Xperia Z1 General forum.) and now, you're ready to root your phone with it.
3) Download, install and run VROOT to root your phone. Again, more information on how to properly root your phone using VROOT can be found in the Xperia Z1 General forum. For me, I just turned on USB Debugging on my Z1, connected my phone to my computer while VROOT was running and clicked the green button until I got root access. It's extremely easy.
4) With Root Access, now you can download and install Dual Recovery for the Xperia Z1 on your phone.
5) Download the latest iHackers 2.1 ROM from the Xperia Z1 Android Development thread and copy it to your phone. This is hands down, the best ROM for the Xperia Z1 right now in terms of battery life. With the latest 4.3 update, I'm able to get over 2 Days worth of battery life on one charge. Battery life is much better on the new iHackers 2.1 ROM running Android 4.3.
6) Download the flashable Locked Dual Recovery for the Xperia Z1 here. http://nut.xperia-files.com/
The file is called XZ-lockeddualrecovery2.7.63-BETA (or newest) .flashable.zip (8.48MB), download it and copy it to your phone, preferably the same place you copied the iHackers 2.1 ROM. To make things easier for yourself, create a new folder on your phone or SD Card in your phone and name it iHackers. Copy both the iHackers 2.1 ROM and the flashable Locked Dual Recovery.zip file into this folder.
7) With both files now copied to a folder on your phone, you're now ready to go into recovery to flash the iHackers 2.1 ROM. Boot into recovery and once you're there, do a Wipe Data/Factory Reset before Installing the ROM.
The rest of these steps are now taken directly from the iHackers 2.1 download thread on the Xperia Z1 Android Development forum.
8) Install the ROM and THEN Dual Recovery. Don't make the same mistake I did, once the installer is finished, DON'T REBOOT THE DEVICE. Uncheck the "Reboot Device" box and go back to recovery to install the flashable Dual Recovery.zip file that's in the iHackers 2.1 folder.
9) Switch Off Your Phone (Do Not Reboot). Select No to Disable Flash Recovery Confirmation.
10) Install Kernel.ftf for C6903 (.136) or Kernel.ftf for C6902 (.136) with Flashtool to get compatible Kernel and Baseband. To download the kernel.ftf file, go to the original iHackers 2.1 thread to download and flash the kernel using Flashtool. You should be familiar with Flashtool at this point since if you make it to this step, you've already used Flashtool once to flash the .534 baseband version of Android.
11) Reboot and Enjoy. Now you're running the latest version of Android 4.3 on your Xperia Z1 on a Locked Bootloader WITH full Root Access. Sure, it's not the stock version but the iHackers 2.1 version of Android 4.3 is just as good, if not better. This will certainly do until there's a better way to simply root the newest Stock Version of Android 4.3.
Guide Step by Step made by @x016x, Updated by Me, Click Thanx many times for us!
hello guys
I have the c6602, and running 4.4.4
I've just unlocked the bootloader and rooted my XZ
I want to install one of the new lollipop ROM's so i need a kernel that has a recovery mod to flash the ROM
the one i found is Doomlord's kernel [.230], but as i know [.230] doesn't work with 4.4.4, if it's just used to get the recovery into the device and be able to flash a ROM, what would be the next step after installing the ROM?
should flash a newer kernel? or it is automatically installed [integrated] in the ROM's zip file?
thnx
The new kernel is integrated in the zip file and will replace the current one when you flash the rom. You will also get the recovery that comes with it.
I prepare install DstrikerZ1 Kai ROM 5.6 at this link: http://forum.xda-developers.com/xperia-z1/development/rom-dstrikerz1-kai-rom-1-0-t2928666
However, it require: "Make sure you have Z1 LP 14.5.A.0.270 pre-rooted and recovery installed"
I cann't find this rom, if recovery installed, that is rooted rom.
Can you help me find this rom or method to install recovery on pre-rooted rom.
Tks.
khongdam said:
I prepare install DstrikerZ1 Kai ROM 5.6 at this link: http://forum.xda-developers.com/xperia-z1/development/rom-dstrikerz1-kai-rom-1-0-t2928666
However, it require: "Make sure you have Z1 LP 14.5.A.0.270 pre-rooted and recovery installed"
I cann't find this rom, if recovery installed, that is rooted rom.
Can you help me find this rom or method to install recovery on pre-rooted rom.
Tks.
Click to expand...
Click to collapse
this is not mandotory , you just need 270 stock rom root with recovery install or pre root stock rom here
Hi everyone,
I'm interested on installing the ROM developed by MXNICE :
http://forum.xda-developers.com/xperia-z1/development/rom-z5mx-rom7-5-0extended-battery-t3224245
What I understand is that I'm gonna need a pre-rooted LP version of android, and I have lots of doubts....!
I have been working on rooting and doing some mods on my xperia z1 but only on KK...so I'm not experienced on LP
What I did in KK is: install version .108 with flashtool, rooted, installed CWM recovery, DEODEXed, Camera Mod, and other minor mods... and that is is what I'm using right now. I did not touch the bootloader so I understand I have locked bootloader.
Now, this custom ROM looks awesome but installation procedure is not clear for me. I have read all the entire thread (64 pages!), and I understand that I have to install this ROM through the recovery and doing a "clean Install"
Post #341 (by arvinaquio) on that thread is:
By the way, I did a very clean installation of this ROM by reinstalling .108. Rooted it and installed Dual Recoveries. Then created a pre-rooted .368 fw through PRFCreator then full wiped and cleared cache before installing the latest fw then power off, turned on the device manually then reconfigured(Unknown Sources, USB debugging) then rebooted to Recovery then full wiped and cleared cache and installed the ROM. Rebooted it and it turned on smoothly without experiencing any error reported recently from other pages. Always do a clean installation to avoid encountering error. Good luck guys and happy modding to all of us!
Click to expand...
Click to collapse
So now, I have to create a pre rooted LP stock ROM, I found the tutorial on the internet on how to do it, but...
1) My xperia z1 model is C6943, I understand it is compatible with C6903 (i lose TV function, which I don't care)... how can I be sure I won't have a problem if I put: KK .108 stock Custom AR for C6943, pre-rooted LP.216 Custom BR (.236 not available for C6943), and then flash MxROM which is Chinese C6903 ? (Edit: is Chinese C6903 version .236)
2.a) When creating the pre rooted LP .216 should I choose the same recovery (CWM) or can I use another (I want to change to dual or TWRP)??
2.b) And also I want to change from "superuser" to "SuperSU".? Can I make those change or should I stick to CWM and superuser?
2.c) If I can't, means I should start again from KK and root installing dual recovery and superSU?
3) Once I get the pre rooted firmware, should I install it over KK firmware using recovery or using flashtool? should I wipe data, cache, and dalvik ?
Of course I already did a backup of my actual system with CWM. I just want to be sure of what I'm going to do next and avoid bootlooping or bricking my phone.
thank you all !
fedessgl said:
Hi everyone,
I'm interested on installing the ROM developed by MXNICE :
http://forum.xda-developers.com/xperia-z1/development/rom-z5mx-rom7-5-0extended-battery-t3224245
What I understand is that I'm gonna need a pre-rooted LP version of android, and I have lots of doubts....!
I have been working on rooting and doing some mods on my xperia z1 but only on KK...so I'm not experienced on LP
What I did in KK is: install version .108 with flashtool, rooted, installed CWM recovery, DEODEXed, Camera Mod, and other minor mods... and that is is what I'm using right now. I did not touch the bootloader so I understand I have locked bootloader.
Now, this custom ROM looks awesome but installation procedure is not clear for me. I have read all the entire thread (64 pages!), and I understand that I have to install this ROM through the recovery and doing a "clean Install"
Post #341 (by arvinaquio) on that thread is:
So now, I have to create a pre rooted LP stock ROM, I found the tutorial on the internet on how to do it, but...
1) My xperia z1 model is C6943, I understand it is compatible with C6903 (i lose TV function, which I don't care)... how can I be sure I won't have a problem if I put: KK .108 stock Custom AR for C6943, pre-rooted LP.216 Custom BR (.236 not available for C6943), and then flash MxROM which is Chinese C6903 ? (Edit: is Chinese C6903 version .236)
2.a) When creating the pre rooted LP .216 should I choose the same recovery (CWM) or can I use another (I want to change to dual or TWRP)??
2.b) And also I want to change from "superuser" to "SuperSU".? Can I make those change or should I stick to CWM and superuser?
2.c) If I can't, means I should start again from KK and root installing dual recovery and superSU?
3) Once I get the pre rooted firmware, should I install it over KK firmware using recovery or using flashtool? should I wipe data, cache, and dalvik ?
Of course I already did a backup of my actual system with CWM. I just want to be sure of what I'm going to do next and avoid bootlooping or bricking my phone.
thank you all !
Click to expand...
Click to collapse
3) the pre rooted firmware you get from prf creator is a zip file. This file is only flashable with the help of a custom recovery.
Don't mix up ftf files and zip files. Ftf => flashtool to get it on phone, zip => custom recovery to get it on phone.
So what I did Was: flash to stock Sony v. 108 firmware for C6943, rooted with easy root tools, download superSU from playstore and installed the dual recovery using install.bat file.
Then rebooted to recovery and made a backup.
When I flashed to lollipop using the pre rooted file I made, the phone went into bootloop. So I restored the backup and installed a pre rooted version that I downloaded from this forum, it was Central Europe for C6903. (in both cases I previously wiped data and cache).
Once I got lollipop working, checked it was rooted and with the dual recovery installed, I enabled USB debuggibg and allow install from external sources. Then entered recovery and made again a backup.
I previously checked that superSU and dual recovery included in the flasheable lollipop zip were the same version I used when I installed them on the stock kitkat rom, dont know if that was necessary, but just in case.
After that I entered recovery again, wiped data and cache and installed the custom rom.
It worked like a charm, and runs very smooth
Enviado desde mi C6903 mediante Tapatalk