Related
Hi Guys,
I'm trying to get back to 100% stock so I can send my phone back for replacement/repair. There was no RUU so I used some kindly donated nandroid back ups and OTA firmware to get back to what should be my current stock 2.29.980.2 (Australian Unbranded HTC__039). Ive got stock recovery back on and OTA's are working. I'm still S-Off and boot loader unlocked.
The last think i need to do is get S-on and relock the bootloader. But in flashing the current firmware, HBoot is at 1.54.
Before I do any brash, does anyone know if revone one will still work to allow me to relock the bootloader and S-on?
If not will I have to downgrade Hboot to 1.44 and get S-On back on then reflash the firmware to upgrade HBoot back to 1.54?
I've also read that if there is anything other than stock HBoot and S-On you can brick the phone. But I take if the Hboot has upgraded from the OTA firmware this should be fine?
Thanks
Ali Baba 84 said:
Hi Guys,
I'm trying to get back to 100% stock so I can send my phone back for replacement/repair. There was no RUU so I used some kindly donated nandroid back ups and OTA firmware to get back to what should be my current stock 2.29.980.2 (Australian Unbranded HTC__039). Ive got stock recovery back on and OTA's are working. I'm still S-Off and boot loader unlocked.
The last think i need to do is get S-on and relock the bootloader. But in flashing the current firmware, HBoot is at 1.54.
Before I do any brash, does anyone know if revone one will still work to allow me to relock the bootloader and S-on?
If not will I have to downgrade Hboot to 1.44 and get S-On back on then reflash the firmware to upgrade HBoot back to 1.54?
I've also read that if there is anything other than stock HBoot and S-On you can brick the phone. But I take if the Hboot has upgraded from the OTA firmware this should be fine?
Thanks
Click to expand...
Click to collapse
noooooooooooooo, don't s-on with 1.54.
criszz said:
noooooooooooooo, don't s-on with 1.54.
Click to expand...
Click to collapse
You might want to be a bit more helpful and actually tell him why not
I would also advise against reverting to S on, because you won't be able to regain S off again, at least currently with 1.54 hboot.
If you wish to send for repair, my advice would be ensure you have stock recovery and stock Rom.
Use revone to remove tampered, and also relock bootloader .
No real need to revert to S on, as Soff doesn't indicate that you tampered with your device as a small number of HTC One were sold with S off
Sent from my HTC One using xda app-developers app
Ali Baba 84 said:
Hi Guys,
I'm trying to get back to 100% stock so I can send my phone back for replacement/repair. There was no RUU so I used some kindly donated nandroid back ups and OTA firmware to get back to what should be my current stock 2.29.980.2 (Australian Unbranded HTC__039). Ive got stock recovery back on and OTA's are working. I'm still S-Off and boot loader unlocked.
The last think i need to do is get S-on and relock the bootloader. But in flashing the current firmware, HBoot is at 1.54.
Before I do any brash, does anyone know if revone one will still work to allow me to relock the bootloader and S-on?
If not will I have to downgrade Hboot to 1.44 and get S-On back on then reflash the firmware to upgrade HBoot back to 1.54?
I've also read that if there is anything other than stock HBoot and S-On you can brick the phone. But I take if the Hboot has upgraded from the OTA firmware this should be fine?
Thanks
Click to expand...
Click to collapse
I am on the same boat with you. unbranded Aussie One..
I had my own backup 1.29.980.17 from TWRP and restoring from my backup made my screen not working at all..
I have 1.54 hboot as well. Does 1.54 hboot and 4.1.2 doesnt work together? Isnt backup from xda is also 4.1.2 as well?
Sorry about asking question in your thread, but I just want to do same thing like you and I failed..
paul_59 said:
I would also advise against reverting to S on, because you won't be able to regain S off again, at least currently with 1.54 hboot.
If you wish to send for repair, my advice would be ensure you have stock recovery and stock Rom.
Use revone to remove tampered, and also relock bootloader .
No real need to revert to S on, as Soff doesn't indicate that you tampered with your device as a small number of HTC One were sold with S off
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I didnt think revone was compatable with 4.2.2?
i too am needing to remove TAMPERED from mine on 4.2.2 i have the stock rom and recovery now.
rotten.monkey said:
I didnt think revone was compatable with 4.2.2?
i too am needing to remove TAMPERED from mine on 4.2.2 i have the stock rom and recovery now.
Click to expand...
Click to collapse
It says tampered because you have some unsigned software installed. Probably hboot or recovery.
I hoping I can get some clarification on this subject. I may have to take my phone into Sprint for either repair or new phone since it will not connect to the newly added 4G network in my area. So going back to stock my be needed for me to do so.
Since the RUU for the 4.4.2 update isn't available yet, is there a way to downgrade back to 4.3 so I can return back to stock? I did the OTA update in stock, then gained root access.
Does the process require me to turn S-Off? I'm currently S-On running Running Bad Boyz Sprint ONE KitKat v1.0.
If I go S-Off, is there a way to turn it back S-On? Not sure if Sprint will look at this setting.
Also, I have the update radio and hboot
HBOOT- 1.56.0000
RADIO- 1.00.20.1108
OS- 4.06.651.4
Will I have to downgrade my hboot as well?
Any help will be much appreciated
lihtsout said:
I hoping I can get some clarification on this subject. I may have to take my phone into Sprint for either repair or new phone since it will not connect to the newly added 4G network in my area. So going back to stock my be needed for me to do so.
Since the RUU for the 4.4.2 update isn't available yet, is there a way to downgrade back to 4.3 so I can return back to stock? I did the OTA update in stock, then gained root access.
Does the process require me to turn S-Off? I'm currently S-On running Running Bad Boyz Sprint ONE KitKat v1.0.
If I go S-Off, is there a way to turn it back S-On? Not sure if Sprint will look at this setting.
Also, I have the update radio and hboot
HBOOT- 1.56.0000
RADIO- 1.00.20.1108
OS- 4.06.651.4
Will I have to downgrade my hboot as well?
Any help will be much appreciated
Click to expand...
Click to collapse
You're S-On. Your only option is to perform a factory reset, flash the stock recovery and re-lock your bootloader.
Kraizk said:
You're S-On. Your only option is to perform a factory reset, flash the stock recovery and re-lock your bootloader.
Click to expand...
Click to collapse
Thanks
Do you forward me to a thread that has shows me how to do this? I have an idea on how to do it, just want make sure I do it correctly.
lihtsout said:
Thanks
Do you forward me to a thread that has shows me how to do this? I have an idea on how to do it, just want make sure I do it correctly.
Click to expand...
Click to collapse
unlock recovery
install custom recovery
root
s-off with firewater
downgrade hboot to 1.55
relock bootloader
run RUU 4.3.
Hboot files
ludatrick said:
unlock recovery
install custom recovery
root
s-off with firewater
downgrade hboot to 1.55
relock bootloader
run RUU 4.3.
Click to expand...
Click to collapse
hi I just came across one of the Sprint HTC Max on 4.4.2 with 2.49 hboot. I'd like to unlock the phone but can't find a hboot file to downgrade. Currently s-off, rooted, TWRP and unlocked. It would be great if you could help a brotha out...
Thanks,
Sonny
unlock bootloader
install custom recovery
root
s-off with firewater
downgrade hboot (check rumrunner website for hboot file)
relock bootloader
run RUU 4.3.
sonny5766 said:
hi I just came across one of the Sprint HTC Max on 4.4.2 with 2.49 hboot. I'd like to unlock the phone but can't find a hboot file to downgrade. Currently s-off, rooted, TWRP and unlocked. It would be great if you could help a brotha out...
Thanks,
Sonny
Click to expand...
Click to collapse
hi! i have an rooted and unlocked htc one running 4.4.2. For some reasons i want to go back to 4.3. Can i install guru reset rom in twrp without s-off the device?
kRYySTy said:
hi! i have an rooted and unlocked htc one running 4.4.2. For some reasons i want to go back to 4.3. Can i install guru reset rom in twrp without s-off the device?
Click to expand...
Click to collapse
yes you can, but it will downgrade your software only. Firmware will not downgrade and you'll be unable to apply ota updates because of firmware/software mismatch
oh, thats bad news because i cant s-off my device, it disconnect. and i though that i downgrade it i will be able to s-off.
kRYySTy said:
oh, thats bad news because i cant s-off my device, it disconnect. and i though that i downgrade it i will be able to s-off.
Click to expand...
Click to collapse
Unfortunately firmware downgrade require s-off. What is your issue and what s-off method are you using? And why do you need s-off for?
nevermind. thanks for interes, but i managed to s-off with rumrunner after many tries.
Sorry if it is a noob question
I have a Rogers HTC One, 4.2.2 KitKat, S-On, HBoot 1.56, Software 4.19.631.9, Root, TWRP (unlocked at HTC Dev)
I don't have a Nanodroid Backup (Big error...)
I haven't been successful in getting S-OFF neither with Rumrunner nor firewater, I kind of disappointed, and maybe I'm taking the lazy way. I want to go back to stock so I can get future OTA updates. So... I don't care much about the Relock flag or anything, just the OTAs,
Can I just use a RUU and flash it right away? So get a fresh rom, unroot, and stock recovery? Or what can I do? I don't want to brick my device.
I see that in http://forum.xda-developers.com/showthread.php?t=2428276 there is the KitKat Rogers RUU, can I use this even if I'm S-ON?
Thanks for your help...
jorgepena9 said:
I see that in http://forum.xda-developers.com/showthread.php?t=2428276 there is the KitKat Rogers RUU, can I use this even if I'm S-ON?
Click to expand...
Click to collapse
With S-ON, you can flash a ruu if its the same version or higher than what you have on the device, so yes, you can use the 4.19.631.9 ruu. You must also have a locked/relocked bootloader to use a ruu with S-ON.
I have a HTC One on the EE network in the UK and I am still currently on Android 4.3 and Sense 5.5, they haven't bothered to release Android 4.4 yet and I have no hope that they will release Sense 6.
So, I would like to know how to go about changing my EE branded phone into an Unlocked International Version so that I can receive OTA updates direct from HTC.
Current CID: ORANG001
Current Hboot: 1.55
Current Software Number: 3.63.61.1
Radio: 4A.21.3263.04
Locked Bootloader with S-On
I would very much appreciate any help you can give.
Thank-You
rh92 said:
I have a HTC One on the EE network in the UK and I am still currently on Android 4.3 and Sense 5.5, they haven't bothered to release Android 4.4 yet and I have no hope that they will release Sense 6.
So, I would like to know how to go about changing my EE branded phone into an Unlocked International Version so that I can receive OTA updates direct from HTC.
Current CID: ORANG001
Current Hboot: 1.55
Current Software Number: 3.63.61.1
Radio: 4A.21.3263.04
Locked Bootloader with S-On
I would very much appreciate any help you can give.
Thank-You
Click to expand...
Click to collapse
first of all you need to unlock your bootloader and s-off your phone, debrand is not possible with s=on
the you would need to change your cid to something like HTC__001 or developer edition cid, one fastboot command required to do this.
and then run the correct RUU for those cid's and your done.
its quite easy to do, the hardest part is getting s-off, however you may be ok on 1.55 hboot, try rumrunner, read the instructions and download the required file here: http://rumrunner.us/
Seanie280672 said:
first of all you need to unlock your bootloader and s-off your phone, debrand is not possible with s=on
the you would need to change your cid to something like HTC__001 or developer edition cid, one fastboot command required to do this.
and then run the correct RUU for those cid's and your done.
its quite easy to do, the hardest part is getting s-off, however you may be ok on 1.55 hboot, try rumrunner, read the instructions and download the required file here: http://rumrunner.us/
Click to expand...
Click to collapse
Do I need custom recovery? If so which is best.
And do I need to have a custom ROM installed to gain s-off or can s-off be achieved on my current EE branded ROM?
Thanks
rh92 said:
Do I need custom recovery? If so which is best.
And do I need to have a custom ROM installed to gain s-off or can s-off be achieved on my current EE branded ROM?
Thanks
Click to expand...
Click to collapse
nope its not required for either, you should be able to s-off on stock rom, if you get an error or for some reason it fails, then you MAY have to flash a custom recovery and custom rom / kernel.
The RUU's will put you back to fully stock anyway in the end.
Seanie280672 said:
nope its not required for either, you should be able to s-off on stock rom, if you get an error or for some reason it fails, then you MAY have to flash a custom recovery and custom rom / kernel.
The RUU's will put you back to fully stock anyway in the end.
Click to expand...
Click to collapse
If the s-off does cause an error or it fails, can this cause my device to get bricked?
And by fully stock do you mean that the RUU turns s-on and locks my boot loader? (just in case I need to send my phone in for repair).
Thanks
rh92 said:
If the s-off does cause an error or it fails, can this cause my device to get bricked?
And by fully stock do you mean that the RUU turns s-on and locks my boot loader? (just in case I need to send my phone in for repair).
Thanks
Click to expand...
Click to collapse
no your phone wont brick
and no the ruu wont turn your phone s-on, you will need to lock your bootloader before running the RUU, but that's one simple command too, but only after s-off.
all you need right now is to make sure you have the drivers installed and that your device is detected in windows both when booted into a rom and on the bootloader screen.
Seanie280672 said:
no your phone wont brick
and no the ruu wont turn your phone s-on, you will need to lock your bootloader before running the RUU, but that's one simple command too, but only after s-off.
all you need right now is to make sure you have the drivers installed and that your device is detected in windows both when booted into a rom and on the bootloader screen.
Click to expand...
Click to collapse
After installing the RUU how would I get s-on?
Thanks
rh92 said:
After installing the RUU how would I get s-on?
Thanks
Click to expand...
Click to collapse
don't s-on, never s-on simple as that.
Seanie280672 said:
don't s-on, never s-on simple as that.
Click to expand...
Click to collapse
Ok, I was just asking in case I needed to send my phone in for repair in the future.
rh92 said:
Ok, I was just asking in case I needed to send my phone in for repair in the future.
Click to expand...
Click to collapse
not really something they will check to be honest, but if you s-on and you've played about with your phone down the line, like flashed a modified firmware or hboot, you will get an instant brick, if your hboot version is too high you will get the tampered flag back, or if you make a mistake along the way and the fix requires s-off, it will be very difficult to get again.
Seanie280672 said:
not really something they will check to be honest, but if you s-on and you've played about with your phone down the line, like flashed a modified firmware or hboot, you will get an instant brick, if your hboot version is too high you will get the tampered flag back, or if you make a mistake along the way and the fix requires s-off, it will be very difficult to get again.
Click to expand...
Click to collapse
So, is the following step by step list correct.
1. Unlock boot loader
2. Get s-off via rumrunner
3. Change CID
4. Lock boot loader
5. Run RUU
And, I am currently on 4.3 and Sense 5.5, so can I go straight to the sense 6 and Android 4.4 RUU, or do I have to install the sense 5.5 and Android 4.4 RUU first.
Thanks
rh92 said:
So, is the following step by step list correct.
1. Unlock boot loader
2. Get s-off via rumrunner
3. Change CID
4. Lock boot loader
5. Run RUU
And, I am currently on 4.3 and Sense 5.5, so can I go straight to the sense 6 and Android 4.4 RUU, or do I have to install the sense 5.5 and Android 4.4 RUU first.
Thanks
Click to expand...
Click to collapse
yup that's the correct order, and you will have to use this RUU as its the only full RUU available, everything else is just OTA's
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
Seanie280672 said:
yup that's the correct order, and you will have to use this RUU as its the only full RUU available, everything else is just OTA's
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
Click to expand...
Click to collapse
And after installing this RUU I can just download Sense 6 via OTA.
rh92 said:
And after installing this RUU I can just download Sense 6 via OTA.
Click to expand...
Click to collapse
yes, just accept the ota's one at a time.
Seanie280672 said:
yes, just accept the ota's one at a time.
Click to expand...
Click to collapse
Thanks for your help
I have an PN07200, how can I get sense 6, which will be the best RUU and CID?.... Thanks!
Enviado desde mi HTC One X+ mediante Tapatalk
is it possible to re-apply the branding?
i.e.
RUU
change cid
OTA with brand change
gwaitsi said:
is it possible to re-apply the branding?
i.e.
RUU
change cid
OTA with brand change
Click to expand...
Click to collapse
yup, change your cid to its original one, and find your service providers RUU and flash it.