Related
MY Phone Condition:
My phone was previously install with voodoo rom and use clockwork recovery to restore to my stock rom that i backup and it crash half way.
My phone was hardware lock this mean no matter how i press the volume and power button , i will never get into download mode. non of the method posted work !
My phone cannot use "adb reboot download" because there is no OS and it was stuck in the recovery loop.
It does not have clockwork recovery because i formatted my internal sdcard
If i do have clockwork recovery and i use restore image or install new from zip , i still stuck in the recovery mode after reboot several times.
My phone does not mount to internal sdcard because i don't even know what i did on this part.
I believe i screw up my partition of the phone.
DO IT AT YOUR OWN RISK.
You need the Samsung USB driver and you can get it from Here
http://forum.xda-developers.com/showthread.php?t=728929
First Part
1. Download update.zip from the link below. This was post by another member.
The post is here http://forum.xda-developers.com/showthread.php?t=804305
2. Place the update.zip in tools folder so you can push it into your phone by using adb command
3. Plug usb into the phone and your phone should be on the Android system recovery <2e>
4. Use your volume button to select reinstall package, don't press power button yet.
5. constant "adb push update.zip /sdcard" from computer , you will get permission denied.
6. While you are constantly pushing the adb command from computer. press the power button on the phone so it install update.zip from sdcard.
7. This is the part where it force adb push into sdcard without permission
8. once the update.zip install completed. unplug the usb cable from the phone and take the battery out.
9. put the battery back to the phone then press on both volume button.
10. While holding both volume button , plug in your usb cable and it will boot to download screen.
If you need use Odin to flash your phone to original stock rom. Go to the Second Part
Second Part:
If you get black screen with only 4 light on the bottom after flashing from Odin.
Follow http://forum.xda-developers.com/showthread.php?t=728698
There should be T959-PDA.tar,T959-CSC.tar and T959-Phone.tar within the package.
Check "Re-Partition" , "Auto Reboot" and "F.Reset Time" check box. Use the PIT 0512 version. Use "PDA", "PHONE" and "CSC" from the link above.
After flashing with Odin, you will loose the download mode. repeat the first part and you are good to go.
Here is the link on rooting the phone
http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_Samsung_Galaxy_S_(Vibrant)
If your phone is hardware locked, how are you able to get into recovery? Hardware locked phone means no recovery and download mode.
Sent from my SGH-T959 using XDA App
mr2t32 said:
If your phone is hardware locked, how are you able to get into recovery? Hardware locked phone means no recovery and download mode.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
my hardware lock mean cannot use the button method to get into download mode and using adb reboot download does not help too.
Im pretty sure hardware lock does not mean no recovery. Just no button download mode
Sent from my SGH-T959 using XDA App
you saved my life man. thank you so much. this was the only thing that worked, after days of frustration
No, it means both.
Sent from my SGH-T959 using XDA App
muncknr said:
you saved my life man. thank you so much. this was the only thing that worked, after days of frustration
Click to expand...
Click to collapse
i was about to give up. i was trying to push update.zip and do adb reboot download left and right and no luck untill i found this method. It took me a week to figure it out
wildklymr said:
No, it means both.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
my recovery was working because i was stuck in the a loop. ya , this update.zip pretty much do both download mode and recovery mode.
What the point of this? Does the other thread not cover this??
Master™ said:
What the point of this? Does the other thread not cover this??
Click to expand...
Click to collapse
Are you asking or you are insulting ?
jaex said:
Are you asking or you are insulting ?
Click to expand...
Click to collapse
probably asking. Considering there is another thread on the same topic that has been on the front page for over a week now, with several pages of replies.
http://forum.xda-developers.com/showthread.php?t=804305
EDIT: So you were bricked and hardware locked and got yourself out of it? If thats the case then yets its different than that thread and why didn't you just come out and say it?
nermie said:
probably asking. Considering there is another thread on the same topic that has been on the front page for over a week now, with several pages of replies.
http://forum.xda-developers.com/showthread.php?t=804305
EDIT: So you were bricked and hardware locked and got yourself out of it? If thats the case then yets its different than that thread and why didn't you just come out and say it?
Click to expand...
Click to collapse
You figure it out after all. I already stated the condition of my phone ! My phone was pretty bricked at that point. There is way for me to push any files into the phone because i don't have permission and my phone will not go to download mode by using the volume button. It just stuck at recovery mode.
There are guide out there teach you to use "adb push download". This method only work if you are in your phone and you turn on debug mode. My phone crash at the clockwork recovery bootloader. Then i formated my internal sdcard that hold the clockwork. next i push a stock update.zip that does not have su and busybox so i lost the capability to push anything into the phone.
no download mode , no permission, no sdcard --> You tell me how can i use the method that post few week ago ?
muncknr said:
you saved my life man. thank you so much. this was the only thing that worked, after days of frustration
Click to expand...
Click to collapse
Thank You
Thank ! You save my phone !
unfortunately, i was one of those careless people to brick my phone via Voodoo.
Firstly, i tried to "FLASH" the disable_voodoo zip file via Clockwork, i put it in root, and never created any folders. i knew i had to disable voodoo before flashing but my steps were wrong.
sadly enough, my phone was also HW locked, so i got it exchanged. now im not using voodoo YET and i my new vibrant can handle OC and has the recovery/download mode via buttons.
atlaswingpasaway said:
unfortunately, i was one of those careless people to brick my phone via Voodoo.
Firstly, i tried to "FLASH" the disable_voodoo zip file via Clockwork, i put it in root, and never created any folders. i knew i had to disable voodoo before flashing but my steps were wrong.
sadly enough, my phone was also HW locked, so i got it exchanged. now im not using voodoo YET and i my new vibrant can handle OC and has the recovery/download mode via buttons.
Click to expand...
Click to collapse
i use shell to create the file that disable voodoo. after disable voodoo , i was able to do restore and install new rom unfortunately after restore or install new rom , it still reboot into recovery.
I also forgot to disable voodoo, and this was before there were fix instructions posted. So i basically effed up my phone to the point of being stuck in the samsung recovery loop, no hardware download mode, no clockwork recovery, no update.zp, no adb download.
I really thought I had completely bricked my phone, I tried this just out of desperation and what do you know, push update.zip over and over and click and it goes through, which allowed me to get into download mode.
muncknr said:
I also forgot to disable voodoo, and this was before there were fix instructions posted. So i basically effed up my phone to the point of being stuck in the samsung recovery loop, no hardware download mode, no clockwork recovery, no update.zp, no adb download.
I really thought I had completely bricked my phone, I tried this just out of desperation and what do you know, push update.zip over and over and click and it goes through, which allowed me to get into download mode.
Click to expand...
Click to collapse
nice , you just have to re-root and install the new rom again , if it brick again , just use this method and you are good again.many of us forgot to disable the voodoo before we restore or install new rom and this crashes the phone.
Need some help really bad
Ok so I have a similar situation as you did (OP), only mine is a bit worse... In my irrational "in the moment" fear of the situation, I used adb reboot recovery to get into recovery mode (HW locked phone) and I did the option that deletes all the **** on the phone and restores the phone to its original format (I think it reinstalled the OS or something, because it looks brand new). So now, whenever I boot up, it does the annoying black screen with the 4 glowing buttons thing for a while, and then eventually the OS actually shows up on the screen. Then it does "scanning media" thing over and over again, but thats not the main problem. I figured, hey this isnt so bad atleast I found your thread and would be able to use your method to help restore my phone... the problem is that somehow my "settings" button is totally gone from the app menu, and I cant get it into debug mode, so I cant use either adb or your method or ANYTHING!! My phone is practically bricked as I cant do anything because its constantly laggy and turns back to the black screen thing, and then when it is showing the homescreen I cant do **** because even swiping to another screen takes like 5 minutes to do cause its so laggy. So basically I ****ed up, and I really need some help.. Im kinda a noob at this whole thing and im really outa options as far as I can tell.. does anyone know what I can do to repair my phone? Thanks!
Hello everybody,
so I'm as new to this forum as I am to the android world. Just this Wednesday i bought a new LG Optimus 4X HD on amazon.de
Thought it would be nice to start of with Cyanogenmod.
So I started my search for some good "How-To's"...it were many I went through and I already invested many hours in getting this running. Sadly it still doesn't work. I actually wanted to stay with one How-To but at one point there's always a download not working so that other sources are needed.
So what did I do...
-I rooted it yes (at this point I needed to download "Rooting Toolkit for Optimus 4X HD" which wasn't downloadable so i switched to another How-To, btw. first How-To: http://androidlegend.com/android-4-2-1-via-cyanogenmod-10-1-for-lg-optimus-4x-hd-p880-cm10-1/
-Installed "LG 4X Recovery 1.2" and installed this way CWM.
-At another point here I installed ROM Manager, installed it and went into Recovery and here happend the first problem, kernel panic.
Said something like "couldn't load kernel/wrong kernel", kernel panics...Me panics too
Anyway, force kill -> auto reboot -> still kernel panic -> again -> batterie out and a few times with usb cable connected to PC -> Batterie again, works :good:
Ok so Clockworkmods Rom Manager seemed to be not that good... did recovery boot with LG 4X Recovery, tada works, I go into the folder with the Cyanogenmod-zip and want to start the ROM installation and it says Status 7 (of course I googled Status 7 and searched here in the xda-boards for it, nothing helpful found yet)
Installed older version of LG 4X Recovery (1.1), still same fault.
I uninstall the ROM manager, redownload and reinstall, try to backup -> Kernel panic.
I search for a different How-To, yet nothing good happened. Others go something similar and say "at booting press On-Button and Volume down-button at the same time", I do that -> Kernel panic
I have no idea whats wrong with the kernel...but normal booting works fine.
Next I read something about needing to unlock bootloader, have a workthrough aka this http://forum.xda-developers.com/showthread.php?t=2224020
After I enter "adb reboot oem-unlock" in DOS command window it should say something concerning "open bootloader", but not in my case, just a normal reboot happened (this is what it looks like at least). Checking the hidden menu also doesn't show anything as I don't have the option with the boot-loader status there.
Next trick, I go to LG Recovery again and first wipe the whole stuff and try then the Cyanogen istall, still doesn't work and as I wasn't able to backups before (tried Titanium but it froze at 12% and the stuff about ROM Manager is told^^) I now had a clean factory install, all my work before lost, nothing rooted and still a kernel which panics when I do the "safe-boot"(this volume- and on-button-thing).
I also tried 3-All-in-one solutions, neither of them worked. (2 german ones, and one english one)
So I think thats it, ah wrong, still not finished. I also tried to install a new kernel to erase that f****ng problem with the kernel panic. I choose to use WerwewolfJB_v005 http://forum.xda-developers.com/showthread.php?t=2256899
the easy and fast way made the same as the try before with the "open bootloader"-try, just normal restart. When I enter the second line in the command line, it just says "waiting for device".
So yeah, thats it. I don't know what else to do. Does anyone know what I could also do, or is this case unsolvable? Is the Smartphone broken or did I make a mistake at any point? What should I do?
I'd be super glad if anyone could help me here. I hope I described my case well enough. I hope I didn't forget anything.
Thanks in advance!
Greetz chrisus
I am also new to this stuff but maybe i could help you anyway
What is the Firmware Version of your phone?
(Sorry for bad english )
The old "adb reboot oem-unlock" didn't work for me on UK, v234-000 either. I followed this thread instead and it worked perfectly first time.
As long as your phone has been turned on and connected to the network for long enough on v20x you should be fine - once you get the notification from LG about your phone being registered or similar then you'll be fine, normally a couple of hours.
Just reflash your phone to stock, wait for the notification and try the two-step method from the above post and you should be fine.
root , recorery and unlock boot loader
you must have your bootloader unlocked in order to flash kernels
( this worked for me but I can't guarantee it will work for others you can only try !! be aware when messing with firmware and bootloader you warranty could be voided )
make sure your phone is rooted you know if it is rooted because you will have superuser installed in your apps ( grey square icon with green android head on it ). if not I used this method to root my phone so try this http://forum.xda-developers.com/showthread.php?t=2180688
if your phone is rooted next you will need a recovery this will help to backup your phone and create a restore point so in case any thing goes wrong. to install a recovery go to play store and download rom manager ( clockworkmod ) once installed open rom manger and select recovery setup. then select install or update recovery then select your phone ( lg optimus 4x hd). then select flash clockworkmod recovery. and then wait while it downloads and setup . hopefully when finished it will say succesfull. ( make sure phone is rooted or it wont work ) to check clockwork mod is working you can reboot into recovery through rom manager or power off phone then hold volume down key press power button to power up but keep holding volume down key until recovery boot up. ( be a wise option to backup phone now in recovery)
next to unlock bootloader ( so you can flash roms with kernels) go to this thread, http://forum.xda-developers.com/showthread.php?t=2224020
and download the BL_unlock_new .rar file when its download copy it to your desktop on pc and then extract it to desktop on pc . now make sure your phone is not connected to your computer go to phone settings,then go to development options, and then select usb debugging on. once debugging is on now connect your phone to pc wait for it to connect you can keep your phone on charging mode. now open the BL_unlocking_new extracted folder on desktop on pc and double click on the BL_unlock file a box should open up on your desktop asking you to tap a key to continue so press a key now your phone should reboot and some white writing will appear on screen .on your desktop the bottom line should say please... now tap a key on computer it should say press any key to continue < waiting for device> now disconnect phone from computer look on phone screen it should say now ready! now hold power button for 10 secs and let phone reboot. to test if bootloader is unlocked on phone go to dail pad and dail this 3845#*880# you should get the hidden menu on your screen scroll down to bootloader unlock check and select then select bootloader unlock check and hopefully it should say unlock...
now you have root , recovery and bootloader unlock, now you can download a rom for this phone copy rom ( should be a zip file ) to your phone then open rom manager on phone and reboot in to recovery or power off phone, hold volume down button then press power button should now boot into recovery then you want to use volume keys to scroll down and select wipe data/factory reset with power button then scroll down and select advanced then scroll down and select wipe dalvik cache then you want to select go back then select install zip from sd card then select where you saved your rom sd card or external sd card then select rom then select install...
hopefully if that's helped you or anybody else ...
Hursty uk said:
next to unlock bootloader ( so you can flash roms with kernels) go to this thread, http://forum.xda-developers.com/showthread.php?t=2224020
and download the BL_unlock_new .rar file
Click to expand...
Click to collapse
If the OP can possibly get his bootloader unlocked following the official method then he should, rather than using that file. Nobody really knows what all the 'fuses' that are blown by using that file do and that would certainly result in his warranty being voided in any country, whereas in a lot of countries his warranty won't actually be voided by using the official unlock method.
added warning
SimonTS said:
If the OP can possibly get his bootloader unlocked following the official method then he should, rather than using that file. Nobody really knows what all the 'fuses' that are blown by using that file do and that would certainly result in his warranty being voided in any country, whereas in a lot of countries his warranty won't actually be voided by using the official unlock method.
Click to expand...
Click to collapse
edited last post with a warning you could void warranty !!
Ok, thanks for the answers so far. But still, wasn't able to get any further.
@Dexxon: Firmware version is 4.0.3
Besides: Kernel Version is 2.6.39.4 and there's also something written like "[email protected] #1" in the hidden menu...is this normal? AP Bootloader Verison unknown and AP OS Version is 2.6.39.4 also this jinwoo...
@SimonTS: I tried to unlock the bootloader with your link and advices (which is the same as i tried before).
Got a message saying "Thanks for buying this LG Phone..blabla" and I guess thats what you mentantioned about that informing.
Battery was loaded to 100% so i connected it to PC, said "LG Software Mode Connection" on the phone (before I always took that "data exchange connection"), went to the adb folder and made a command window there, entered "adb reboot-bootloader", smartphone reboots, should stay in LG window screen, but it doesn't. It just boots totally normal into the home screen.
@Hursty uk: As I said in the first post. Everything regarding the ROM Manager from CWM sends my Phone into kernel panic. As this is quite hard to get a normal reboot again (even battery out for some time and back-in doesn't solve this) I really prefere to not use this option. As it is just frustrating and doesn't help.
And yes it is already rooted (I have SuperSU and I checked it with the "Root Checker"-App) Everything says it is rooted. I rooted it with that method: androidlegend.com/how-to-root-lg-optimus-4x-hd-o4x-p880
Ah I really don't know what else to do. Is something just wrong with my device?
btw I also can't do a software update with the LG Software from there website, so I could at least go 4.1 instead of 4.0.3 atm...
When I try it that way, and install the USB-Drvier for LG P880 the SW-Update button stays grey and is unclickable even though the phone is connected.
chrisus said:
Ok, thanks for the answers so far. But still, wasn't able to get any further.
@Dexxon: Firmware version is 4.0.3
Besides: Kernel Version is 2.6.39.4 and there's also something written like "[email protected] #1" in the hidden menu...is this normal? AP Bootloader Verison unknown and AP OS Version is 2.6.39.4 also this jinwoo...
@SimonTS: I tried to unlock the bootloader with your link and advices (which is the same as i tried before).
Got a message saying "Thanks for buying this LG Phone..blabla" and I guess thats what you mentantioned about that informing.
Battery was loaded to 100% so i connected it to PC, said "LG Software Mode Connection" on the phone (before I always took that "data exchange connection"), went to the adb folder and made a command window there, entered "adb reboot-bootloader", smartphone reboots, should stay in LG window screen, but it doesn't. It just boots totally normal into the home screen.
@Hursty uk: As I said in the first post. Everything regarding the ROM Manager from CWM sends my Phone into kernel panic. As this is quite hard to get a normal reboot again (even battery out for some time and back-in doesn't solve this) I really prefere to not use this option. As it is just frustrating and doesn't help.
And yes it is already rooted (I have SuperSU and I checked it with the "Root Checker"-App) Everything says it is rooted. I rooted it with that method: androidlegend.com/how-to-root-lg-optimus-4x-hd-o4x-p880
Ah I really don't know what else to do. Is something just wrong with my device?
btw I also can't do a software update with the LG Software from there website, so I could at least go 4.1 instead of 4.0.3 atm...
When I try it that way, and install the USB-Drvier for LG P880 the SW-Update button stays grey and is unclickable even though the phone is connected.
Click to expand...
Click to collapse
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
SimonTS said:
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
Click to expand...
Click to collapse
He might as well just flash JB with flashtool, saves him flashing ICS just to flash JB straight after
Sent from my rooted P880
SimonTS said:
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
Click to expand...
Click to collapse
that would of been my next answer @SimonTS . A while back a flashed something on my phone and it got stuck at the lg bootup picture what I had to do was re-install original firmware ( through KDZ files) to get my phone working. I would try the link @SimonTS suggested .
@non4 said:
He might as well just flash JB with flashtool, saves him flashing ICS just to flash JB straight after
Click to expand...
Click to collapse
Indeed - sorry, having a slightly dense day and was more thinking about getting him back to the stage at which his phone was working correctly before.
SimonTS said:
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
Click to expand...
Click to collapse
Thanks for that link, I tried it but that also didn't work (at least I guess so...)
I did everything like said at the link but at the last point the program (kdz_fw_upd.exe) crashes. Tried it 3 times, every time as administrator like mentioned in that forum post. I'm using Win 8 64bit btw...
Screenshot is in the attached .jpg. My system is japanese, but I think you can figure out what this kind of window means. It just says that the program isn't responding and needs to be shutdown.
I tried it like mentioned with putting the battery back in when the log starts and without putting it back in, in both cases the program crashes after a few seconds (~10 secs) when started.
Where do I actually see which V**x version is installed? If v10x or v20a? Surprisingly the LG Support Tool said I have v10H when the phone was still connected after the crash. And it offered me a SW-Update. But I haven't done that one yet, not sure if that would work correct...
@ chrisus
man, what is your phone status now?
in what situation you are actually?
gtdaniel said:
@ chrisus
man, what is your phone status now?
in what situation you are actually?
Click to expand...
Click to collapse
Freshly wiped so its factory reset, just rooted and LG 4X Recovery installed (for CWM touch). Nothing more.
Following Informations from Root Checker-App:
Product: x3_open_eu
Host: buildgb2
User: jinwoo.lee (wtf? i don't know what should be here at the point user, but that is clearly not me, is this factory set style?)
Additional Phone Informations from settings:
Android version: 4.0.3
Kernel version: 2.6.39.4
Build number: IML74K
Software version: LG-P880-V10h-NOV-19-2012 (ah now I see where that v10x-info is^^)
chrisus said:
Freshly wiped so its factory reset, just rooted and LG 4X Recovery installed (for CWM touch). Nothing more.
Following Informations from Root Checker-App:
Product: x3_open_eu
Host: buildgb2
User: jinwoo.lee (wtf? i don't know what should be here at the point user, but that is clearly not me, is this factory set style?)
Additional Phone Informations from settings:
Android version: 4.0.3
Kernel version: 2.6.39.4
Build number: IML74K
Software version: LG-P880-V10h-NOV-19-2012 (ah now I see where that v10x-info is^^)
Click to expand...
Click to collapse
cool!
i am glad you can bring the phone in working status again.
now you have to do to put cyanogen on your phone is:
1. install JB 4.1.2 update
2. root it again
3. install CWM Recovery again
4. unlock bootloader
for first step go to:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
after <=> put your IMEI number
and download a v20a version compatible with your device
and apply update
if you are again in trouble post here...
and if you are else to do, please post here to not make to loose time...
gtdaniel said:
cool!
i am glad you can bring the phone in working status again.
now you have to do to put cyanogen on your phone is:
1. install JB 4.1.2 update
2. root it again
3. install CWM Recovery again
4. unlock bootloader
for first step go to:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
after <=> put your IMEI number
and download a v20a version compatible with your device
and apply update
if you are again in trouble post here...
and if you are else to do, please post here to not make to loose time...
Click to expand...
Click to collapse
+1 this. Also, there have been many problems with running these apps using Windows 8, and you need to make sure you're not using a USB 3 port as they being other problems in to the equation.
gtdaniel said:
cool!
i am glad you can bring the phone in working status again.
now you have to do to put cyanogen on your phone is:
1. install JB 4.1.2 update
2. root it again
3. install CWM Recovery again
4. unlock bootloader
for first step go to:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
after <=> put your IMEI number
and download a v20a version compatible with your device
and apply update
if you are again in trouble post here...
and if you are else to do, please post here to not make to loose time...
Click to expand...
Click to collapse
Ok so I've flashed JB with the LG Updater (without batterie and volume down button pressed connecting to PC, than start the update -> meanwhile putting batterie back in)
JB worked just fine and I also don't had the problem with the kernel panic when booting with volume down and power button.
So I thought, everything fresh and also different, I might give the ROM Manager App again a try (after I rooted it that way: http://forum.xda-developers.com/showthread.php?t=2180688 )...well, wasn't that smart. After I installed the Recovery for P880 in the ROM Manager, i made a normal boot (just for sure), back in the app, i wanted to go into Recovery mode and again kernel panic, bit different this time cause it does a shutdown after 5 seconds^^
Anyway, this way it didn't work, from now on I also couldn't go into safe mode anymore, same kernel panic.
As this kind of recovery doesn't seem to work, I tried the "old" way with the "LG 4X Recovery" I mentioned before. After recovery installation i just wanted to boot normal aaaand nothing happened. It stayed in the LG screen. Restart and anything didn't help here so I backed back to v10H with previous methods. Now I just got a security error saying "morning call is empty", no idea what that means but I just did the same method for JB again.
Worked afterwards, so I wanted to try it without ROM Manager Recovery installed and just LG 4X Recovery, (after rooted again of course) and it didn't boot again. Same game again.
So now I have JB installed, I'm going to root it now again, but I don't know what way I should go for doing the Recovery Part. I'm stuck on point 3 here
Any advices? btw thanks a lot until here, at least I made it half-way-through to JB now. Worst case I'd stay with that one at least.
I'm not entirely sure which threads you've been reading. Once you have the stock v20x ROM on your phone, just leave it alone for a few hours and make sure it is fully charged
After that, try to unlock the bootloader before doing anything else. If that works then you can worry about CWM and custom ROMs.
chrisus said:
Ok so I've flashed JB with the LG Updater (without batterie and volume down button pressed connecting to PC, than start the update -> meanwhile putting batterie back in)
JB worked just fine and I also don't had the problem with the kernel panic when booting with volume down and power button.
So I thought, everything fresh and also different, I might give the ROM Manager App again a try (after I rooted it that way: http://forum.xda-developers.com/showthread.php?t=2180688 )...well, wasn't that smart. After I installed the Recovery for P880 in the ROM Manager, i made a normal boot (just for sure), back in the app, i wanted to go into Recovery mode and again kernel panic, bit different this time cause it does a shutdown after 5 seconds^^
Anyway, this way it didn't work, from now on I also couldn't go into safe mode anymore, same kernel panic.
As this kind of recovery doesn't seem to work, I tried the "old" way with the "LG 4X Recovery" I mentioned before. After recovery installation i just wanted to boot normal aaaand nothing happened. It stayed in the LG screen. Restart and anything didn't help here so I backed back to v10H with previous methods. Now I just got a security error saying "morning call is empty", no idea what that means but I just did the same method for JB again.
Worked afterwards, so I wanted to try it without ROM Manager Recovery installed and just LG 4X Recovery, (after rooted again of course) and it didn't boot again. Same game again.
So now I have JB installed, I'm going to root it now again, but I don't know what way I should go for doing the Recovery Part. I'm stuck on point 3 here
Any advices? btw thanks a lot until here, at least I made it half-way-through to JB now. Worst case I'd stay with that one at least.
Click to expand...
Click to collapse
ok.
now i suppose you have a functional rooted JB 4.1.2 device.
from that you have to going on to rest of the steps to have CM installed on your device.so if it is not that (functional rooted JB device) is need to flash again JB and rooted again.
if you have the proper kdz file the tutorial for flasing is there: http://forum.xda-developers.com/showthread.php?t=2069723
and the tutorial for rooting device is there: http://forum.xda-developers.com/showthread.php?t=2180688&highlight=root+jb+4+1+2+
after that make some reboot of device to verify that:
1. the device boot to system normaly a few times (just let the device boot itself)
2. the device enter in S/W Upgrade Mode (with the device off, put the USB cable in device and PC or in device and AC adapter and press VOL DOWN + POWER) a few times
3. the device boot in Stock Recovery (with the device off, press VOL DOWN + POWER) a few time.
if you can manage to do this tree steps a few times normaly then you have a fully functional device and we go to next step that is Custom Recovery
the chance to make this steps without errors is more big if you start from scratch meaning fully wipe the device and flashing stock LG software on the device.
so, let as know here when you are ready...
gtdaniel said:
ok.
now i suppose you have a functional rooted JB 4.1.2 device.
from that you have to going on to rest of the steps to have CM installed on your device.so if it is not that (functional rooted JB device) is need to flash again JB and rooted again.
if you have the proper kdz file the tutorial for flasing is there: http://forum.xda-developers.com/showthread.php?t=2069723
and the tutorial for rooting device is there: http://forum.xda-developers.com/showthread.php?t=2180688&highlight=root+jb+4+1+2+
after that make some reboot of device to verify that:
1. the device boot to system normaly a few times (just let the device boot itself)
2. the device enter in S/W Upgrade Mode (with the device off, put the USB cable in device and PC or in device and AC adapter and press VOL DOWN + POWER) a few times
3. the device boot in Stock Recovery (with the device off, press VOL DOWN + POWER) a few time.
if you can manage to do this tree steps a few times normaly then you have a fully functional device and we go to next step that is Custom Recovery
the chance to make this steps without errors is more big if you start from scratch meaning fully wipe the device and flashing stock LG software on the device.
so, let as know here when you are ready...
Click to expand...
Click to collapse
he should unlock bootloader before flashing custom recovery.
so, dont use rom manager before you unlock bootloader, that's why you get kernel panics.
Hello,
My previous G2 was having screen issues, so I just got a replacement from Verizon that's on 5.0.2 Lollipop. I wanted to root it, and so looked at the various guides online and on here and found the one click root method. In each method, I have made it through the steps until it asks me to go into download mode; for some reason, my phone isn't going into the mode. I press and hold the volume up button, then plug in a USB cable (tried multiple cables), and all that happens is the device cycles (e.g. the LG logo appears for a few seconds, then the phone reboots'), and then the phone boots up normally. I never see the 'download mode' screen or anything. This is driving me mad! Any help would be greatly appreciated.
Joe
bump
bump
Anyone have any ideas?
You could made a video and uploaded on youtube just to see if you are making a mistake in the process.
Fallow this insructions
Verizon has has a step by step just change volume down to volume up for download mode
www . verizonwireless . com/support/knowledge-base-104173
remove spaces from link
yepic said:
Verizon has has a step by step just change volume down to volume up for download mode
www . verizonwireless . com/support/knowledge-base-104173
remove spaces from link
Click to expand...
Click to collapse
Thank you for responding, but this did not work for me either. I have tried holding every combination, then plugging phone into USB, and I can't get download mode. Tried different cables, different USB ports on my laptop.
I am surprised that no one else has any ideas on this. Has no one else experienced this with their G2???
Mine only went into download mode if set to MTP, good luck
Sent from my VS980 4G using Tapatalk
Hey! I had the same issue rooting my LG G2. I found that what you should just do is download and install AutoRec (It's an APK) and let it run. Worked without a hitch for me. You can also try Kingo Root if Auto Rec fails.
mach01 said:
Hey! I had the same issue rooting my LG G2. I found that what you should just do is download and install AutoRec (It's an APK) and let it run. Worked without a hitch for me. You can also try Kingo Root if Auto Rec fails.
Click to expand...
Click to collapse
Hi, in AutoRec I cannot click on the Lollipop to flash TWRP (I checked to make sure it's the correct version). And where can I download Kingo Root? I know there's a link on their website, but that wasn't downloading for me.
Try using IE for the download and see if it works. I can't promise anything seeing that you are on 5 but just give it a try. You can also try TowelRoot. https://towelroot.com/
Click on the symbol to download directly onto your phone and run the Apk file. Hope this helps.
mach01 said:
Try using IE for the download and see if it works. I can't promise anything seeing that you are on 5 but just give it a try. You can also try TowelRoot. https://towelroot.com/
Click on the symbol to download directly onto your phone and run the Apk file. Hope this helps.
Click to expand...
Click to collapse
Towelroot doesn't work, I don't think it works on Lollipop. And what are you suggesting I try to download from IE exactly?
BUMP
Bump please god help me
But if you connect the phone to the computer being off and while pressing down doesn't work?
Enviado desde mi MB886 mediante Tapatalk
Bump.
I have a Verizon LG G2 VS98027A, on 4.4.2 as a loaner from a friend for now.
Trying to update to lollipop and download mode doesn't work for me either. It doesn't do anything while holding volume button and plugging in to PC.
Hey guys,
So my phone was messing up and I decided to do a factory reset, however I ended up doing a DATA wipe (Don't ask how). Any ways, now I have a phone that only has a folder for TWRP. I can still reboot to recovery, but thats about it. Can you guys point out some links on how to install the OS again?
*** Update***
So I've read plenty of threads with this problem. The phone is stuck on boot loop, I can get it to recovery mode but TWRP terminal command or ADB don't work! ALSO I CAN'T get the phone into download mode. I've held the power up button plenty of times while starting up the phone, while connecting to computer still no luck.
Can anyone help getting to download mode? after that i can flash new ROMS!
Any help would be appreciated, thanks!
You want a custom or stock.....
If you want stock and you can go to download mode so it is easy
ahmed banna said:
You want a custom or stock.....
If you want stock and you can go to download mode so it is easy
Click to expand...
Click to collapse
Can't get it to download mode :/
HI Guys, Hoping this is the right place to ask this question, first a little of context
My Device is a Samsung J7 Prime G610M, the home button is totally damaged, im trying to root my device for the 1st time, as far as i know i need TWRP in order to do this, im able to access download mode using ADB (adb reboot Download) i am able to flash the TWRP of this thread (https://forum.xda-developers.com/ga.../recovery-twrp-3-2-0-galaxy-j7-prime-t3716355) everything goes well and the flash is complete.
However im not able to access the custom recovery, i enter adb reboot recovery but instead of TWRP i got the standard android recovery (blue letter, dark background). i don't know if im doing something wrong or if TWRP is not accessible under ADB commands.
can you give me some ideas to complete this? i tried looking for a pre-rooted rom to install using odin with no results, ive tried using adb and fastboot modes with no success.
thanks for the help.
say, this is a long shot but,
after you flashed twrp in Odin, did you untick the auto reboot (in odin)?
if you didn't....
rocky78 said:
say, this is a long shot but,
after you flashed twrp in Odin, did you untick the auto reboot (in odin)?
if you didn't....
Click to expand...
Click to collapse
yes i did, the problem is that i can not enter recovery mode in the usual way (hold power+home and power), im working right now on a way to accomplish this, involves downgrading, rooting and reinstall everything.
keep posted.
Mase_sanchez said:
HI Guys, Hoping this is the right place to ask this question, first a little of context
My Device is a Samsung J7 Prime G610M, the home button is totally damaged, im trying to root my device for the 1st time, as far as i know i need TWRP in order to do this, im able to access download mode using ADB (adb reboot Download) i am able to flash the TWRP of this thread (https://forum.xda-developers.com/ga.../recovery-twrp-3-2-0-galaxy-j7-prime-t3716355) everything goes well and the flash is complete.
However im not able to access the custom recovery, i enter adb reboot recovery but instead of TWRP i got the standard android recovery (blue letter, dark background). i don't know if im doing something wrong or if TWRP is not accessible under ADB commands.
can you give me some ideas to complete this? i tried looking for a pre-rooted rom to install using odin with no results, ive tried using adb and fastboot modes with no success.
thanks for the help.
Click to expand...
Click to collapse
Try to root using cf auto root
https://forum.xda-developers.com/ga...ot-cf-auto-root-j7-prime-sm-g610f-sm-t3656072