Before my phone stuck at the fastboot, and i followed the http://forum.xda-developers.com/showthread.php?t=2666763&page=8 but now my phone cant even go to fast boot. It will just loop the lg logo no matter what key i press.
The computer will not recognize it and adb devices wont show anything either. Is this phone done?
Doubt it. It won't go into factory reset or anything no matter what button combination you use?
If not there is a pretty tricky long process using Linux you could try. I just used the method to bring back a Verizon lg g2 that would only go to the lg logo screen with the small 702 boot certification error in the top left corner.
---------- Post added at 05:43 PM ---------- Previous post was at 05:39 PM ----------
But you would need the
Sbl1.img
Boot.img
Aboot.img
SignedTwrp.img
Tz.img
Rpm.img
And use Linux to push the to the right partitions. Which you'll also have to use Linux to find out which partition locstions/ address (I guess you would call it ) they need to be pushed to.
http://forum.xda-developers.com/showthread.php?t=2582142
This is what matt outs talking about. You may be able to follow this guide using the correct images from kit Kat for your device. Using the aboot.img and recovery.img should be enough to fix you from what i understand you used the jb images from D-FUSE thread only.
Yeah but do not use the stock recovery.img.
And this method if done wrong can potentially render your device useless even to LG. So be careful.
Related
\\\Disclaimer: I am not responsible if you mess this up & break your phone///
Checking Your Situation:
*Phone only boots to Fastboot
*Phone does/Doesn't charge
*Power button Seems useless
*Phone Turns on and only shows-
the X screen & Vibrates 7x's
*LED Only shows Green/ Orange
indication light
Things You'll Need:
*Wall Charger
*USB Cable
*Computer (duh)
*Battery (of course)
*FRG83 ROM file http://tinyurl.com/6bym3vg
*Android ADB Setup
*Fingers Crossed
(Tip: if you are using the same Sdcard when the phone messed up, reformat it or use a new one)
Step One:
Download FRG83 ROM file http://tinyurl.com/6bym3vg
and unzip the package into your AndroidSDK Tools Folder
Step Two:
Watch the battery trick video
http://youtu.be/2O5adV-jj64 (Thanks n1newbie)
Once you've analyzed the video enough
plug your phone (while it's off) to the wall
charger and while doing the wall trick !!Make
sure you hold down the Volume-Down Button!! so
you can boot into fastboot.
Step Three:
Once established fastboot, plug the phone
to your computer and let your computer discover the
device.
!!Make sure the device says Fastboot USB!!
Open Command Promt (CMD). If you already
know how to use Android ADB type these commands:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fastboot devices
!!Make Sure You Device ID Shows UP!!
fastboot erase userdata
fastboot flash system system.img
fastboot flash boot boot.img
fastboot reboot
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Let the phone run everything through and you should
be one Froyo.
Step Four:
Power down your phone
Reboot into Recovery (to see if your phone is still rooted)
If you are able to get into recovery flash any ROM
you like and Enjoy your UnBricked Nexus One
lilj4321 said:
If anyone needs the fix for this soft brick
let me know so i can post instructions!
Click to expand...
Click to collapse
You might as well write them out. You never know when someone will need them.
taodan said:
You might as well write them out. You never know when someone will need them.
Click to expand...
Click to collapse
+1. will be very useful n helpful when that occurs. so pls explain the method. thanx
Sent from my Nexus One using Tapatalk
n1newbie said:
+1. will be very useful n helpful when that occurs. so pls explain the method. thanx
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
+2, hope it won't occurs
hi lilj4321. thanx for the steps frnd
the youtube link that you provided returns 404 error. so you might use this link for video trick (by myself )
PS- sry if i am wrng. will the device boot into fastboot mode after the seven vibration brick happens
Sent from my Nexus One using Tapatalk
fixed the link!
no the phone will stay on the X screen until your battery dies
which is why you have to do the battery trick while holding the
volume-down button during the whole process.
lilj4321 said:
fixed the link!
no the phone will stay on the X screen until your battery dies
which is why you have to do the battery trick while holding the
volume-down button during the whole process.
Click to expand...
Click to collapse
oh okies. thanx for using my video buddy
will try this if seven vibration brick happens. but ill pray it shdnt happen
will be helpful for all if it is stickied :thumbup:
just my 2 cents ...
Sent from my Nexus One using Tapatalk
I hoped for something much more useful.
The method of reflashing to stock using fastboot commands has been posted on Nexus One Wiki for 2.5 years now.
And of course, it won't solve any overheating phone, and no "7-vibration brick".
Thanks for trying to help, but the post is kinda (very) useless.
Stuck in fastboot
My phone went into this rare phenomonen "7vibrations no boot"... its been 2weeks. Im not able to fix it till now.
Firstly , My phone doesnt respond in hboot screen when the sdcard is inserted. So for entering fastboot, I will take out sdcard and go to fastboot and then put my sdcard when the phone is connected to PC so that it doesnt turnoff when i pullout the battery. this i have been facing for quite long. cudnt fix it.
I tried exactly what you said.. but im stuck in the fastboot now.. im not able to flash anything using adb in fastboot.
im getting errors in fastboot.
when i typed 'fastboot flash system system.img"
it gives an error like "error: cannot load 'system.img' : unknown error"
did "fastboot erase" and it worked.
but flashing is not happening.
please help me out
---------- Post added at 08:22 PM ---------- Previous post was at 08:02 PM ----------
i somehow managed to flash all those things what u said in your post...
but still when rebooted after flashing via fastboot, the same 7 vibrations happening.
My phone doesnt boot..
i havent done the battery trick as you said. Im not able to do it. That video doesnt have any instruction and no audio too.
any instruction on how to do it will be helpful.
ajaymkd said:
My phone went into this rare phenomonen "7vibrations no boot"... its been 2weeks. Im not able to fix it till now.
Firstly , My phone doesnt respond in hboot screen when the sdcard is inserted. So for entering fastboot, I will take out sdcard and go to fastboot and then put my sdcard when the phone is connected to PC so that it doesnt turnoff when i pullout the battery. this i have been facing for quite long. cudnt fix it.
I tried exactly what you said.. but im stuck in the fastboot now.. im not able to flash anything using adb in fastboot.
im getting errors in fastboot.
when i typed 'fastboot flash system system.img"
it gives an error like "error: cannot load 'system.img' : unknown error"
did "fastboot erase" and it worked.
but flashing is not happening.
please help me out
---------- Post added at 08:22 PM ---------- Previous post was at 08:02 PM ----------
i somehow managed to flash all those things what u said in your post...
but still when rebooted after flashing via fastboot, the same 7 vibrations happening.
My phone doesnt boot..
i havent done the battery trick as you said. Im not able to do it. That video doesnt have any instruction and no audio too.
any instruction on how to do it will be helpful.
Click to expand...
Click to collapse
After doing all the stuffs, and after fastboot reboot.. The phone on the same state.. Brick state with 7 vibrate + X sign. Why is that so?
I am stuck in a bootloop right now due to being an idiot and performing the OTA after being rooted. Now I cannot hard reset via the power/vol down or the menu of the phone. I am not familiar with adb or command prompts, etc and I don't know what fastbooting means? I have downloaded the adb/fastboot rar and when i click either all they do is zoom through a list of words and close? what do i have to do to get my phone working again?!
I feel your pain!
I am having the same issues! I get about 30 seconds to quickly flick to something before it powers off again. I found that I can keep it powered off and I can get to a boot menu but all of the options cause the screen to go blank then it restarts again. PLEASE help! my phone is my lifeline and it is required for my work!
NovaSS369 said:
I am stuck in a bootloop right now due to being an idiot and performing the OTA after being rooted. Now I cannot hard reset via the power/vol down or the menu of the phone. I am not familiar with adb or command prompts, etc and I don't know what fastbooting means? I have downloaded the adb/fastboot rar and when i click either all they do is zoom through a list of words and close? what do i have to do to get my phone working again?!
Click to expand...
Click to collapse
You both need to use RSD to flash back to stock firmware.
http://forum.xda-developers.com/showthread.php?t=2446515
You DONT have to rsd !!!! Just fastboot erase user cache
---------- Post added at 03:59 AM ---------- Previous post was at 03:55 AM ----------
http://www.droidrzr.com/index.php/t...et-up-adb-and-fastboot-for-your-windows-7-pc/
If you don't know fastboot/adb here is a good guide how to set it up.
got it to do the fastboot, every time i install the update though i get the same viscious cycle :/
So here's the scenario. I was unlocked, running a custom ROM. Decided to return to stock so I grabbed an official image and head into fastboot.
Well the problem occurred when running the flash-all.sh in my terminal. My computer completely slowed to a crawl about half way though! I thought it was forzen so after 5 minutes I unplugged to USB cable from the phone and my CPU came back to life. Now I noticed in the log that it was interrupted when I unplugged it so I decided to redo the entire process.
Now during that process I somehow flashed the system.img but only partial because when I boot up it gives my just a wallpaper and system ui FC's. So me being curious, I wanted to see if I can unlock the bootloader (even though it was already unlocked, dont ask!) I got an error so I OF COURSE had to see if I got an error LOCKING the bootloader. I was successful locking it so NOW Here's the fun part, since it flashed a system.img and it's fubar'd, I cannot access Dev Options to enable bootloader unlocking so now I think I'm stuck with no OS and a locked bootloader.
So how to hell is one suppose to fix this problem?
Additional Info: I can get into Bootloader. I can NOT get recovery because it's missing.
You can't. This is why you don't lock the bootloader until you know your os is fully functioning.
Sent from my Nexus 6 using XDA Free mobile app
maybe you can flash a stock recovery, if fastboot will let you. and then try factory resetting.
Chances are, you're hosed. If you don't have TWRP installed and you are stuck with no OS, you'll most likely have to RMA and hopefully that's an option. There's no known fix for stock recovery with no OS installed.
---------- Post added at 10:20 PM ---------- Previous post was at 10:13 PM ----------
You can try to issue the following commands from bootloader in fastboot but no guarantee that it will work.
fastboot format userdata
fastboot format cache
Again it probably won't work but worth a try.
I've got a T-Mobile M9 with a locked bootloader and no recovery. I am unable to boot into the system and thus can't enable USB debugging. I foolishly relocked it trying to flash an RUU and now it won't boot. I have tried re-unlocking it thru fastboot but the commands are not recognized.
Please help?!?
I would recommend downloading the RUU image, renaming it "0PJAIMG.zip" and then placing it in the root directory of a microsd card and putting that into your device. Then reboot into fastmode (download mode), holding vol-down immediately after powering on. It should hopefully detect the zip image and restore the phone to factory condition.
That's if fastboot is not working. Make sure your commands are correct too. I'm sure you're fully aware but doesn't hurt to double check.
Good luck.
---------- Post added at 07:40 AM ---------- Previous post was at 07:39 AM ----------
BTW, you dont need to relock the bootloader (at least I didnt have to) to install a RUU.
minotauri said:
I would recommend downloading the RUU image, renaming it "0PJAIMG.zip" and then placing it in the root directory of a microsd card and putting that into your device. Then reboot into fastmode (download mode), holding vol-down immediately after powering on. It should hopefully detect the zip image and restore the phone to factory condition.
That's if fastboot is not working. Make sure your commands are correct too. I'm sure you're fully aware but doesn't hurt to double check.
Good luck.
---------- Post added at 07:40 AM ---------- Previous post was at 07:39 AM ----------
BTW, you dont need to relock the bootloader (at least I didnt have to) to install a RUU.
Click to expand...
Click to collapse
Thanks so much, dude! My M9 is back up and running. Looked everywhere on the Internet and didn't see that method anywhere.
I was in the same predicament. Bricked mine trying to install a custom ROM. I get the following error:
Failed: -2, 22: fail to flash via download
Failed: -2, 22: fail to flash via download
Failed: -2, 22: fail to flash via download
minotauri said:
I would recommend downloading the RUU image, renaming it "0PJAIMG.zip" and then placing it in the root directory of a microsd card and putting that into your device. Then reboot into fastmode (download mode), holding vol-down immediately after powering on. It should hopefully detect the zip image and restore the phone to factory condition.
That's if fastboot is not working. Make sure your commands are correct too. I'm sure you're fully aware but doesn't hurt to double check.
Good luck.
---------- Post added at 07:40 AM ---------- Previous post was at 07:39 AM ----------
BTW, you dont need to relock the bootloader (at least I didnt have to) to install a RUU.
Click to expand...
Click to collapse
Thanks so much! I friggin love you for being the only one in the history of the Internet to suggest this very simple solution.
deepdownnyc said:
Thanks so much! I friggin love you for being the only one in the history of the Internet to suggest this very simple solution.
Click to expand...
Click to collapse
Yeah it's actually the most common way of flashing a RUU and it's posted all over. Even a giant thread on it in the international forum. I don't think you looked very hard through "the history of the Internet."
Hello Everyone , I have ran into a very bad problem and would appreciate some help. I tried rooting my phone (Razer Phone 2 Atnt varient) with the following method (https://forum.xda-developers.com/razer-phone-2/development/root-pie-update-unlocked-devices-t3905454) after doing so my phone got stuck in bootloop. Therefore, I thought it would be best to unroot the phone (or at least flash the original rom) . So , I tried doing that with the following method (https://forum.xda-developers.com/razer-phone-2/how-to/razer-phone-2-unroot-step-step-t3896529) but that did not solve anything . It still remains stuck on the (Razer logo , Powered by Android) . However, I can still access adb and use fastboot as well. Any quick help would be greatly appreciated . I really can't afford loosing a phone so close to holidays.
Have you read through this whole page yet?
You can flash via fastboot very simply by double clicking the flash_all.bat after extracting the image. Good luck!
https://developer.razer.com/razer-phone-dev-tools/general-instructions/
Hey , thanks for reaching out. I already tried doing the flash all script method through adb. Yet I am still stuck on bootloop. I am really confused.
I can. However, still access fastboot mode. I don't know what I am doing wrong. I should also mention that my bootloader is unlocked. Any further help would be greatly appreciated.
Paradox.7777 said:
I can. However, still access fastboot mode. I don't know what I am doing wrong. I should also mention that my bootloader is unlocked. Any further help would be greatly appreciated.
Click to expand...
Click to collapse
Check your USB port. It might not recognize the device
I'm also having this issue where I have clicked flash all and it either gets stuck on the razer logo or tells me the phone is corrupt and when I hit the power button it just bootloops. I know the port is fine, I have flashed phhusson's Android 10 GSI successfully, but I wanted to change something and it seems that I cannot go back to stock without getting a bootloop.
---------- Post added at 05:55 PM ---------- Previous post was at 05:30 PM ----------
I think I might have solved the issue! In the flash all batch file it flashes two different system images, system.img to partition a and system_other.img to partition b. I edited the flash all file to flash system.img to both partitions cause my phone seems to use partition b instead of a as it's operating partition and it no longer bootloops and in fact has booted to stock! You can give that a try.
Did you flash back to the stick boot image? If not do that first than flash your stock image. If you are still in a boot loop try flashing the old MR0 image to get out of the boot loop. If it works flash the newly released MR2 after.