I just made some silly change on my HTC M7 Sprint.
1. my phone is already s-off with super CID
2. I changed from super cid to HTC__044
3. I set to S-ON
4. now the phone stuck and I can't get back to stock (even from RUU or exe)
How can i get to change CID (try to s-off but still not work for me)
:crying::crying::crying:
Related
Hello there
A few ago I used revone's guide in order to go S-OFF and it worked. I have a few questions regarding RUUs and OTAs:
1) If there's an RUU that is NOT for my device (say my device is international and the RUU is for Asia or Europe, for instance) and my device is S-OFF, can I still install it and would it work properly?
2) My CID is HTC__J15 and we always receive OTA updates LAST (at least that's how it was on my HTC One X), if I change the CID to HTC__001, for instance, which is Europe, will I be able to receive the updates just as they do over there? And if I do change the CID, which RUU should I install in order to be stock? And would I have to change to S-OFF and be unrooted?
3) If my device is S-OFF, CID HTC__001 and I am running TrickDroid 7.5.0 and I hear of an OTA update available for HTC__001, for instance 4.2.2 JellyBean, would I have to install stock ROM and stock recovery, which is basically what an RUU does?
4) What is the benefit of SuperCID? If you can install any RUU with being S-OFF only.
Thank you very much.
Hi everybody I restored my htc one to stock by ruu.exe for European models because my phone is with spain vodafone and changed my cid to supercid and restored successfully. After that i changed my cid to original one Vodap304. But cid getter is showing vodap304 at top and htc_001 is below as main cid, can i get ota or i will brick my phone or do i need to change vodap304 to htc_001.please help
My device is Super CID. I have a CWN nandroid thats got loads of CIDs so was going to just use CID HTC__102 once I have flashed the OS. Then removed tampered, Lock bootloader then S-on.. Will this work or does it have to go back to the vodaphone CID? regards
anarchyuk said:
My device is Super CID. I have a CWN nandroid thats got loads of CIDs so was going to just use CID HTC__102 once I have flashed the OS. Then removed tampered, Lock bootloader then S-on.. Will this work or does it have to go back to the vodaphone CID? regards
Click to expand...
Click to collapse
Your CID will remain SuperCID only. If you want to go back to the Vodafone CID, you will have to use the 'writecid' command. If you're giving the phone for repair, then you'll have to change to the HTC_102. If not, stay on SuperCID. The RUU will work perfectly on SuperCID
Next, i would never recommend you to go back S-ON. Stay S-OFF. However, if you insist on going S-ON, S-ON ONLY AFTER YOU'RE SUCCESSFULLY ON STOCK FIRMWARE AND HBOOT VERSION IS 1.44/1.54.
Do not S-ON before the RUU is flashed. Do not S-ON if HBOOT is 1.55/1.56. Otherwise, the TAMPERED flag will re-appear
raghav kapur said:
Your CID will remain SuperCID only. If you want to go back to the Vodafone CID, you will have to use the 'writecid' command. If you're giving the phone for repair, then you'll have to change to the HTC_102. If not, stay on SuperCID. The RUU will work perfectly on SuperCID
Next, i would never recommend you to go back S-ON. Stay S-OFF. However, if you insist on going S-ON, S-ON ONLY AFTER YOU'RE SUCCESSFULLY ON STOCK FIRMWARE AND HBOOT VERSION IS 1.44/1.54.
Do not S-ON before the RUU is flashed. Do not S-ON if HBOOT is 1.55/1.56. Otherwise, the TAMPERED flag will re-appear
Click to expand...
Click to collapse
thanks for the reply. Its hboot 1.44.. I am selling it and its supposed to be getting sold as stock... I have just pushed a nandroid for the euro over but had a md5 check error. think this may be because i opened one of the rars to make sure it was for my model id so im re pushing it.. My main concern is.. Can i flash say a ruu exe. leave super cid. lock bootloader and then s-on without a brick?
anarchyuk said:
thanks for the reply. Its hboot 1.44.. I am selling it and its supposed to be getting sold as stock... I have just pushed a nandroid for the euro over but had a md5 check error. think this may be because i opened one of the rars to make sure it was for my model id so im re pushing it.. My main concern is.. Can i flash say a ruu exe. leave super cid. lock bootloader and then s-on without a brick?
Click to expand...
Click to collapse
Look, if you're gonna sell the phone as stock, don't sell it as SuperCID. Sell it with the HTC__102 CID
If for some reason, you still want to sell it as SuperCID, then ignore the first step. Follow these steps in order
1. Change your CID to the stock Vodafone CID (HTC__102)
2. Flash this in TWRP 2.6.3.3 (ive had personal experience, none with CWM):
http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
Choose "Lock Bootloader" and "remove TAMPERED"
3. Once you choose these 2 options and flash the zip, go back to the bootloader and check that the bootloader is now LOCKED and no TAMPERED
4. Now, flash this RUU.exe:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
5. Once the phone boots up successfully, the last thing left is to S-ON. Remember, S-ON the phone before you install any OTA's. Technically, as soon as the phone boots. To S-ON:
Get the phone to fastboot mode, open command prompt on ur PC in the fastboot folder and type:
fastboot oem writesecureflag 3
Then, reboot the phone thrice. It will be S-ON again
raghav kapur said:
Look, if you're gonna sell the phone as stock, don't sell it as SuperCID. Sell it with the HTC__102 CID
If for some reason, you still want to sell it as SuperCID, then ignore the first step. Follow these steps in order
1. Change your CID to the stock Vodafone CID (HTC__102)
2. Flash this in TWRP 2.6.3.3 (ive had personal experience, none with CWM):
http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
Choose "Lock Bootloader" and "remove TAMPERED"
3. Once you choose these 2 options and flash the zip, go back to the bootloader and check that the bootloader is now LOCKED and no TAMPERED
4. Now, flash this RUU.exe:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
5. Once the phone boots up successfully, the last thing left is to S-ON. Remember, S-ON the phone before you install any OTA's. Technically, as soon as the phone boots. To S-ON:
Get the phone to fastboot mode, open command prompt on ur PC in the fastboot folder and type:
fastboot oem writesecureflag 3
Then, reboot the phone thrice. It will be S-ON again
Click to expand...
Click to collapse
I think I have already done most of it, i got the md5 check error to go away, and installed a standard HTC that had the CID HTC_002 available in the build prop. I then flashed stock recovery. Fastboot booted in to CWM and ran the remove tampered. Lock bootloader.. I have just changed the CID From 111111 to HTC__002 and its booted fine. So The bootloader shows locked, no tampered or HTC red developer message under the logo but still hs S-OFF on bootloader screen? what would happen If i s-on now?
edit: Not to worry I done the secuirty flag 3 command and its now s-on and still boots, ty to you both.. really appreciate it
edit: 2 the tampered has came back
edit: 3 back to s-off and bootloader unlocked, tamp flag back too
Originally a Tmobile HTC One
Currently:
S-Off
HBoot 1.54
unlocked bootloader
Stock GPE 4.4.2
I have AT&T and want sense 6, but I don't want the AT&T or Tmobile garbage that comes with it. Am I ok to change MID & CID to unlocked or dev and flash a vanilla RUU?
I tried searching for the answer, but wound up more confused. Just wanted to confirm this was ok. Thanks in advance.
socalledsin said:
Originally a Tmobile HTC One
Currently:
S-Off
HBoot 1.54
unlocked bootloader
Stock GPE 4.4.2
I have AT&T and want sense 6, but I don't want the AT&T or Tmobile garbage that comes with it. Am I ok to change MID & CID to unlocked or dev and flash a vanilla RUU?
I tried searching for the answer, but wound up more confused. Just wanted to confirm this was ok. Thanks in advance.
Click to expand...
Click to collapse
Yes, you can if you want to:
MID change tool: http://forum.xda-developers.com/showthread.php?t=2535365
CID change using: fastboot oem writecid HTC__001 <- or whatever CID you choose, but exactly 8 characters
do NOT go S-On
or just use a custom ROM
but do NOT go S-On
nkk71 said:
Yes, you can if you want to:
MID change tool: http://forum.xda-developers.com/showthread.php?t=2535365
CID change using: fastboot oem writecid HTC__001 <- or whatever CID you choose, but exactly 8 characters
do NOT go S-On
or just use a custom ROM
but do NOT go S-On
Click to expand...
Click to collapse
+1 .. @nkk71 is ABSOLUTELY right about staying S-Off.
Will flashing an RUU file in any way remove the S-OFF or SIM unlock I have on my M7? I also changed the CID to the GPe CID, will that change?
will54880 said:
Will flashing an RUU file in any way remove the S-OFF or SIM unlock I have on my M7? I also changed the CID to the GPe CID, will that change?
Click to expand...
Click to collapse
No RUU, will not change S-OFF or anything else.
will54880 said:
I also changed the CID to the GPe CID, will that change?
Click to expand...
Click to collapse
You may need to change CID to whatever RUU you want to flash, if you get CID error.
Okay, I just updated the CID to the Super CID. Now can I flash any RUU without issues?
will54880 said:
Okay, I just updated the CID to the Super CID. Now can I flash any RUU without issues?
Click to expand...
Click to collapse
CID and MID must match your RUU version. If CID doesn't match, you'll not be able to flash the RUU. If CID is superCID, you'll be able to flash it but you'll not get ota update on some versions so better to use the real CID for that RUU.
If MID doesn't match, you'll be able to flash the RUU but you will not be able to install ota updates (you'll get the "variant system error")
So in example:
if you want to use a WWE ruu (x.xx.401.x) use CID HTC__001 and MID PN0710000
If you want to use a GPE RUU (x.xx.1700.x) use CID GOOGL01 and MID PN0712000
If you want to use a Dev edition ruu (x.xx.1540.x) use CID BS_US001 and MID PN0712000
I tried using the Dev edition Cid and mid numbers, and relocked the boot loader and still got a 155 error code, meaning the ruu didn't match the codes.
Sent from my XT1095 using XDA Free mobile app