I purchased a Note 3 N900A back in March, and it came rooted running Knoxraid and Safestrap. I felt no need to switch ROMs until a few days ago, when Knoxraid started having issues with me logging into Google services (Play Store, Gmail, YouTube, etc). I decided to install the AT&T S5 ROM port and it's working fine, other than it draining my battery more than it was on Knoxraid. To get Knoxraid off the stock ROM slot in Safestrap and to get the S5 port on, I followed these directions: http://forum.xda-developers.com/showthread.php?t=2521899
However, even after reinstalling the Safestrap app and reinstalling the recovery, I cannot boot into it (v3.72). When I rebooted the Note 3 when it was running Knoxraid, there would always be a screen before the boot animation asking if I wanted to boot into Safestrap. However, this doesn't happen anymore. The app says the recovery is installed, but the safe system is not active. When I click reboot to recovery, it doesn't reboot and only says "Safestrap has been allowed permissions from superuser" or something like that and then it says "reboot now". I am unsure of what that means, but when I do reboot, it just reboots the phone normally.
My Note is running 4.4.2 and the model number is SM-G900A (the S5's model number). The baseband version is N900AUCUCMLG and the build number is KOT49H.G900AUCU1ANCE.
Can someone help?
rgao007 said:
I purchased a Note 3 N900A back in March, and it came rooted running Knoxraid and Safestrap. I felt no need to switch ROMs until a few days ago, when Knoxraid started having issues with me logging into Google services (Play Store, Gmail, YouTube, etc). I decided to install the AT&T S5 ROM port and it's working fine, other than it draining my battery more than it was on Knoxraid. To get Knoxraid off the stock ROM slot in Safestrap and to get the S5 port on, I followed these directions: http://forum.xda-developers.com/showthread.php?t=2521899
However, even after reinstalling the Safestrap app and reinstalling the recovery, I cannot boot into it (v3.72). When I rebooted the Note 3 when it was running Knoxraid, there would always be a screen before the boot animation asking if I wanted to boot into Safestrap. However, this doesn't happen anymore. The app says the recovery is installed, but the safe system is not active. When I click reboot to recovery, it doesn't reboot and only says "Safestrap has been allowed permissions from superuser" or something like that and then it says "reboot now". I am unsure of what that means, but when I do reboot, it just reboots the phone normally.
My Note is running 4.4.2 and the model number is SM-G900A (the S5's model number). The baseband version is N900AUCUCMLG and the build number is KOT49H.G900AUCU1ANCE.
Can someone help?
Click to expand...
Click to collapse
Maybe you should try upgrading your modem to NC2.
Here is a link to the modems. Just follow his instructions and you should be fine.
forum.xda-developers.com/showthread.php?t=2698464
After that, head here
forum.xda-developers.com/showthread.php?t=2572978
And download Safestrap 3.75 and follow his instruction on doing so on that. Here are the step I used
1.Have SU
2.Have BusyBox installed
3.Install Safestrap 3.75 app then install the recovery
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
Thanks, I'll try that.
Just realized that since recovery doesn't work, I can't install the modems.
Since I couldn't install the modems without Safestrap, I only updated the apk to 3.75 but I still can't boot into recovery.
xXPINCARXx said:
Maybe you should try upgrading your modem to NC2.
Here is a link to the modems. Just follow his instructions and you should be fine.
forum.xda-developers.com/showthread.php?t=2698464
After that, head here
forum.xda-developers.com/showthread.php?t=2572978
And download Safestrap 3.75 and follow his instruction on doing so on that. Here are the step I used
1.Have SU
2.Have BusyBox installed
3.Install Safestrap 3.75 app then install the recovery
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
Click to expand...
Click to collapse
Help pls
Sent from my SM-N900A
You dont need a recovery to flash modems. You can flash with a custom recovery but since we have a locked bootloader we cant have custom recoveries. But You will use odin to flash it. Meaning you need to hop on your pc and download odin put the files (NC2 modem file) where specified and be sure to have your phone in download mode (holding power, home, and volume down buttons) then you would click the start button
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
Sorry, I'm kind of a noob, where do I put the modem files? Also, can I check what modem I'm currently on? Thanks
Sent from my SM-N900A
You're on MLG as you have specified with the info above, and here are the steps:
1. Download the desire modem from above. (NC2 in your case)
2. Extract the .zip
3. Boot phone in to download mode by holding Volume Down + Home + Power
4. Open Odin3
5. Click on CP
6. Select xxx_modem.tar.md5
7. Click Start.
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
I updated the modem to NC2 through Odin and now the SS version is 3.75 but I still can't boot into Safestrap, do you have any other ideas? Thanks for your help thus far
Did you actually install busy box by opening the app and click install or just download it from the play store
It's actually installed
I would suggest you go to this thread http://forum.xda-developers.com/showthread.php?t=2559715 and go back to jb and start over or you can go here http://forum.xda-developers.com/showthread.php?p=54179016 to get as close to official kk with root and try safestrap agian
Do you have busybox installed?
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
Yes
I need some help... I have been trying to upgrade my Hyperdrive ROM to rls19 from rls10 (I think, last updated about a year ago) but no matter what I do I cannot get wifi working on my phone.
Here is what I did
1) Used Sunderwear's method with PwnedKitKat to upgrade to 4.4.2
-Wifi did NOT work after switching to 4.3 & ML2 bootloader
-Wifi WORKING on 4.4.2, NC9 bootloader
2) Followed safestrap install instructions for Hyperdrive rls19:
SAFESTRAP USERS MUST UPDATE TO BASE 4.4.2 FIRMWARE BEFORE FLASHING RLS16
1. Download latest Hyperdrive Rom version
2. Reboot into Safestrap
3. Must flash on stock slot with SS 3.72 (I actually used 3.73, could this be the problem?)
4. Wipe Data/Factory Reset
5. Wipe cache and dalvik cache
6. Install Rom (picking options for AT&T install)
7 Flash super su root zip
7. Flash Modules.zip in found safestrap thread(if needed) (not needed on rls18) [??? So only the Rom & SuperSU are flashed correct?]
8. Reboot (First Boot may take up to 10 mins)
9. Let Phone sit for 10 minutes
10. Reboot again
11. Enjoy!
Click to expand...
Click to collapse
Problem?: after installing ROM I had no choice but to reboot (phone actually shut off when I tried to say "no" to the reboot), so immediately went back into recovery and flashed SuperSU before phone actually started up
I then had to enter correct APN for AT&T Mobile Data, but my wifi STILL is not working. I cannot even toggle it on, it slides to ON but immediately slides back to OFF
Could someone PLEASE help me out??
peppermintkitty said:
I need some help... I have been trying to upgrade my Hyperdrive ROM to rls19 from rls10 (I think, last updated about a year ago) but no matter what I do I cannot get wifi working on my phone.
Here is what I did
1) Used Sunderwear's method with PwnedKitKat to upgrade to 4.4.2
-Wifi did NOT work after switching to 4.3 & ML2 bootloader
-Wifi WORKING on 4.4.2, NC9 bootloader
2) Followed safestrap install instructions for Hyperdrive rls19:
Problem?: after installing ROM I had no choice but to reboot (phone actually shut off when I tried to say "no" to the reboot), so immediately went back into recovery and flashed SuperSU before phone actually started up
I then had to enter correct APN for AT&T Mobile Data, but my wifi STILL is not working. I cannot even toggle it on, it slides to ON but immediately slides back to OFF
Could someone PLEASE help me out??
Click to expand...
Click to collapse
You need to flash the NC9 modules before you reboot your phone. The modules are needed to get WiFi and some other things working. I would delete your ROM slot and start over.
With SafeStrap on the S4 Active you will always have to flash modules, even if it says you don't. There are no ROMs built specifically for the i537, so modules are always required.
Devo7v said:
You need to flash the NC9 modules before you reboot your phone. The modules are needed to get WiFi and some other things working. I would delete your ROM slot and start over.
With SafeStrap on the S4 Active you will always have to flash modules, even if it says you don't. There are no ROMs built specifically for the i537, so modules are always required.
Click to expand...
Click to collapse
Thank you for your reply! I really appreciate any & all help!
That's what I was thinking, but the problem is I can't FIND the NC9 modules...I tried just about every other one though!
Any ideas?
peppermintkitty said:
Thank you for your reply! I really appreciate any & all help!
That's what I was thinking, but the problem is I can't FIND the NC9 modules...I tried just about every other one though!
Any ideas?
Click to expand...
Click to collapse
Well something worked! I got it all working after upgrading to Safestrap 3.75 and creating a new rom slot and letting it settle for almost 2 full days. I kept switching between the stock and HD and tried flashing the masterpatch and maybe a module or two and suddenly today I switched and everything is working!!!
Please help me in Installing Android 5.0 Lollipop on Samsung Galaxy GT-S6012.
Any other latest working Version of Android that i can install ??
Am willing to root my phone.
Please help.
And thanks a ton for your help !!!
sunnynanade said:
Please help me in Installing Android 5.0 Lollipop on Samsung Galaxy GT-S6012.
Any other latest working Version of Android that i can install ??
Am willing to root my phone.
Please help.
And thanks a ton for your help !!!
Click to expand...
Click to collapse
Hello. I'm sorry but actually there's no lollipop for our device, however there is cm 11 with kitkat 4.4.4 but it isn't 100% stable. There's also cm 10.1, the android version maybe be a little old but it's more stable.
To flash this roms, you need this CWM
And for rooting, I think the easiest way is using Cydia Impactor
Boot loop..
Hi. I got a Samsung GT-S6012 that keeps rebooting the Samsung logo and doesn't start. At first I got the phone stuck on the very first logo with Samsung model name. So I did some search. Downloaded Odin and latest 4.1.2 official firmware for that phone model flashed it. Everything worked for a few days but then the battery ran out and phone shut down and when I turned it on again it got stuck on the very first logo and nothing. Then I flashed the same firmware again to get it running and when I checked it the flashing didn't really fully wiped the internal memory cause the data in it was still in tact. So I thought I need full wipe to fix the phone. So installed custom recovery, rooted it and flashed CM 10.1 on it. It was running very smooth everything seemed okay but I wanted the stock rom. So I went to recovery wiped whatever was possible and flashed the stock firmware in download mode again. And now I got stuck on the second Samsung logo and it keeps rebooting it self. I recognize that I cannot wipe data/factory reset and wipe cache in now stock recovery cause it gives me android logo within it a red flag. The wipe cache supposed to fix boot loop problem but it's not an option for me anymore. All I can do now is just enter Download mode. I'm downloading 4.0.4 firmware and gonna try to flash that one see if it works but I doubt. Can anyone suggest me a way to fix it? Please I'm really desperate.
Hi guys, I did a terrible mistake.
Currently I was using my S3 i9305 with AICP 10. To update with the OTA they require TWRP and I thought, why not changing from CWM 6.0.4.7 to the most recent TWRP so that the update process will go fully automatic.
I downloaded the App, but didn't make a Nandroid backup before. Then I installed the proposed TWRP version for my phone. After that the Phone restarted and was stuck at the samsung-logo - restarting every 5 seconds.
So what do I have now?
I have a phone that goes until the bootanimation of ACIP. But then it is looping. ... for hours. I can go into download mode and I already got access to TWRP or CWM - I can install both with Odin v3.09
After researching for more than 4 hours I may kindly ask for your help.
What can I do to get my phone back on? I don't care about the data on the phone. (I already copied the internal SD to my computer).
I tried to reinstall the AICP 10 + Gapps, but that did not work.
Is there anybody out there who is able to help the stupid me?
Thank you very much in advance.
Greetings
Peter
Solved - Installed the Original Samsung FIrmware from Sammobile - then went back to TWRP and then to my ROM.
Please close
I have a rooted ATT Note 3, downgrade back to 4.4.2, used Towelroot, everything working. Installed SafeStrap, tried to load Alliance ROM v12. Safestrap completed, stated was successful. rebooted phone. Starts re-booting then freezes at Samsung Galaxy Note 3 flash screen. Any help or suggestions are appreciated. Otherwise, I'll re-load 4.4.2 using ODIN and try to be content.
The phone has a locked bootloader which means the phone can only run custom ROMs that are based on stock TW.