Related
It is realy strange, but LG has removed all JB updates today, You can check it
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=35XXXXXXXXXXXX - put here Your imei.
My Bad.
Why block ? whats wrong with this ? This is LG tool to check firmware by IMEI model
Mm Okey, but i didnt trusted it becouse the website wasn't verified and he is asking for imei, was thinking of phishing site.
Its not fishing http://csmg.lgmobile.com:9002/ this site belongs to LG Electronics, they host they're firmware here
But why?
Sent from my LG-P700 using xda premium
Because LG have problems with servers. Nothing more. I checked it.
You can also check it on the folowing link:
http://www.smartphenom.com/2013/01/lg-firmware-update-central-beta.html
There is V10K added on 18.04, I think they found some serious flow in JB, so they removed the update. Hope they will fix it soon....
petar.s said:
You can also check it on the folowing link:
http://www.smartphenom.com/2013/01/lg-firmware-update-central-beta.html
There is V10K added on 18.04, I think they found some serious flow in JB, so they removed the update. Hope they will fix it soon....
Click to expand...
Click to collapse
I'm sorry, I don't understand what you mean when you say "they found some serious flow in JB". You mean the ROM has bugs? Or there is so many downloads and the server collapsed
Enviado desde mi LG-P700 usando Tapatalk 2
I dont have exact information, but logicaly server is not colapsed, as You have 10K for download, if there were some minor bug, they would fix it, and release 20B, so I gues there is some more serious thing. I am on 20A and it is working fine, I like the new camera, only two problems are: bigger battery drain (about 30% vs ICS) and often very slow gps position lock.
Most interesting is that the statistics software downloads V20B grown and you can't download it...
The only JB firmware available to download is v20a DEU/GERMANY added 19.4
This situation is strange. The latest version of the software in LGMobile Support Tool is ICS V10K... However, this is not the servers...
I have a problem with official JB. After 2 days of using it normally, apps start crashing, alarm doesnt work ( because of that i was late 3 times for my classes at college ) and i have to restart the phone to get back to normal. So maybe that is the problem with JB
any update when will be the jb v20B will be back ?
L7
softice1969 said:
any update when will be the jb v20B will be back ?
Click to expand...
Click to collapse
In Romania on Vodafone it is available V20B and it works to upgrade from V20A (KDZ ) without a problem!
Hello everyone.
I want to install IZS and I'm not sure if I'm correct, because as you can see English is not my native language.
I have a very old CM build (android 4.1.2 - 10-20121023-nightly-p970) with working CWM (I tried to reboot to recovery and it was successful), kernel 3.0.8-CM, baseband lgp970at-00-V10e-EEU.
If I want to install IZS, I just need to: download zips, access CWM, do wipe data / factory reset, install zips and patched v20 u-boot and everything will be okay? I don't know anything about V30 baseband and locked bootloader (I didn't follow news about p970 development since December 2012), I need working GPS this week, so I don't want to break anything.
Thank you in advance!
t4bris said:
Hello everyone.
I want to install IZS and I'm not sure if I'm correct, because as you can see English is not my native language.
I have a very old CM build (android 4.1.2 - 10-20121023-nightly-p970) with working CWM (I tried to reboot to recovery and it was successful), kernel 3.0.8-CM, baseband lgp970at-00-V10e-EEU.
If I want to install IZS, I just need to: download zips, access CWM, do wipe data / factory reset, install zips and patched v20 u-boot and everything will be okay? I don't know anything about V30 baseband and locked bootloader (I didn't follow news about p970 development since December 2012), I need working GPS this week, so I don't want to break anything.
Thank you in advance!
Click to expand...
Click to collapse
First,You download V1 and V1.1 from the blog,then reboot recovery and do a full wipe.Flash both files(V1 first then V1.1)Then enjoy!Do a nandroid just in case and it is recommended to flash the new baseband.
Sent from my LG-P970 using Tapatalk 4
BlackPie said:
First,You download V1 and V1.1 from the blog,then reboot recovery and do a full wipe.Flash both files(V1 first then V1.1)Then enjoy!Do a nandroid just in case and it is recommended to flash the new baseband.
Sent from my LG-P970 using Tapatalk 4
Click to expand...
Click to collapse
Thanks, so my v10e baseband (and probably old bootloader?) is not a problem?
I have question, do you have screen off animation in this version ? If yes can you uplod this version? (Backup from recevery or maybe .zip folder.
@up Anyway i have one of the first models of this phone with v10a (bought month after release this model) firmware and every rom i have installed works(many)
Tapatalked from LG P970
t4bris said:
Thanks, so my v10e baseband (and probably old bootloader?) is not a problem?
Click to expand...
Click to collapse
Nope.
Sent from my LG-P970 using Tapatalk 4
Bananek said:
I have question, do you have screen off animation in this version ? If yes can you uplod this version? (Backup from recevery or maybe .zip folder.
Click to expand...
Click to collapse
I'm guessing you are talking avout CRT Off animation. Use IZS V2. AFAIK it has Xposed framework. You can activate it with that... But i haven't tried it yet so i can not say it for sure. But if you are going to install IZS, intall V2.
Q&A For released Roms and bug report to avoid off topic on development thread ..
so feel free to ask or anything ..
ROMs
OFFICIAL AICP ROM 4.4.2
UNOFFICIAL Omni 4.4.2
OFFICIAL VanirAOSP 4.4.2
SOKP 4.4.2
@vickyushu can you link me your blog/website?
I searched but didnt find.
guyshelpmeplease said:
@vickyushu can you link me your blog/website?
I searched but didnt find.
Click to expand...
Click to collapse
just see my signature
http://milivic.wordpress.com/
I installed your VanirAOSP 4.4.2 but I had no network, the baseband and also the IMEI were unknown. I followed all steps for installation. I used TWRP, and was on a stock firmware when I did the installation. Returned to stock via ODIN and network was back and so was the IMEI. What could be cause of this. It also happened with 2 other 4.4.2 roms. Most puzzled.
bobfrantic said:
I installed your VanirAOSP 4.4.2 but I had no network, the baseband and also the IMEI were unknown. I followed all steps for installation. I used TWRP, and was on a stock firmware when I did the installation. Returned to stock via ODIN and network was back and so was the IMEI. What could be cause of this. It also happened with 2 other 4.4.2 roms. Most puzzled.
Click to expand...
Click to collapse
use cwm to flash if u r using vanir stock recovery work too just flash data and cache and try again the new build everything working fine let me know if u still facing such problem
vickyushu said:
use cwm to flash if u r using vanir stock recovery work too just flash data and cache and try again the new build everything working fine let me know if u still facing such problem
Click to expand...
Click to collapse
Should I flash the kernel with UKF and reboot to recovery and then install it?
bobfrantic said:
Should I flash the kernel with UKF and reboot to recovery and then install it?
Click to expand...
Click to collapse
u can use that too but there is no need i flash it simple it work try cwm instead of twrp
Really liked aicp rom very smooth
I flashed cpu oc kernels of any rom that worked rom booted and everything was fine
but when i want gpu and cpu oc kernel then i flashed oc kernel of omni 4.4 , resurrection remix roms oc kernel and phone goes in bootloop i dont want to download whole latest rom of aicp that have cpu and gpu oc kernel can u give me its boot.img
Sent from my GT-I9070 using xda premium
Android operating system (above one) is draining battery, battery dropped approx. 20% at night. How to "fix" this?
coffeecore said:
Android operating system (above one) is draining battery, battery dropped approx. 20% at night. How to "fix" this?
Click to expand...
Click to collapse
Turn off internet overnight. Syncing is draining battery.
shut_down said:
Turn off internet overnight. Syncing is draining battery.
Click to expand...
Click to collapse
Had internet turned off, data and wifi.
Can't install xda app, gettings this error: Couldn't install on USB storage or SD card, I can install other apps but not xda app
hello
shut_down said:
Turn off internet overnight. Syncing is draining battery.
Click to expand...
Click to collapse
Hello everyone.
My English is not good. Please forgive me.
I come from China forum, like brush ROMs.
··But the Great Wall firewall, cause I can't download your compiled ROMs,
which is a pity!
But I can download SkyDrive here, 【dev-host ]and【mediafire.]you can use ROMs to upload it?
i like yours ROMs VanirAOSP,can you upload it on dev-host ]or【mediafire? thank you!
We Chinese fans will thank you for your kindness!
CHINESE Customers said:
Hello everyone.
My English is not good. Please forgive me.
I come from China forum, like brush ROMs.
··But the Great Wall firewall, cause I can't download your compiled ROMs,
which is a pity!
But I can download SkyDrive here, 【dev-host ]and【mediafire.]you can use ROMs to upload it?
i like yours ROMs VanirAOSP,can you upload it on dev-host ]or【mediafire? thank you!
We Chinese fans will thank you for your kindness!
Click to expand...
Click to collapse
Did you checked his blog? This ROM is hosted on both sites dev-host and mediafire.
http://milivic.wordpress.com/
How is perfornance in this ROM ?
And how about battery backup ?
Is this rom more stable than CM 11 ?
Wysłane z mojego GT-I9070 przy użyciu Tapatalka
I like AICP rom..evry feature of this rom is awesom...2 dayz ago i installed this rom but after charging why its show auto charging..i mean to say my mobile was not connected to charger and its show charging indicator...tell me wat to do to resolve this issue..now i revert to other rom n evry thing is running perfect & with any auto charging issue.
Sent from my GT-I9070 using XDA Premium 4 mobile app
sandeep_chawla007 said:
I like AICP rom..evry feature of this rom is awesom...2 dayz ago i installed this rom but after charging why its show auto charging..i mean to say my mobile was not connected to charger and its show charging indicator...tell me wat to do to resolve this issue..now i revert to other rom n evry thing is running perfect & with any auto charging issue.
Sent from my GT-I9070 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i see this soon and i fixed this in my next build
MikiGry said:
How is perfornance in this ROM ?
And how about battery backup ?
Is this rom more stable than CM 11 ?
Wysłane z mojego GT-I9070 przy użyciu Tapatalka
Click to expand...
Click to collapse
which rom u r talking about
vickyushu said:
which rom u r talking about
Click to expand...
Click to collapse
Oh soory.
I was thinking about AICP.
Wysłane z mojego GT-I9070 przy użyciu Tapatalka
I installed the latest Vanir ROM and i have a little bug. I cannot preview the ring and the notification sounds. I scroll down and selecting some sounds but no sound is heared. Phone rings normally when someone calls me.
Sent from my GT-I9070 using XDA Free mobile app
Hi all,
I have flashed many roms on my LG 2X and lastly I have tried to flash SlimRom 4.4 but stuck to boot logo. I have read the thread and that seems to be a problem for some users since this is a test rom.
What I want to know is this:
I have used for some time tonyp's 10.2 rom which I liked alot. But then used AIO tool and NVFlsh to repartition my phone.
Last time I used AIO and partitioned my phone to NBTL, unlocked with TWRP 2.6. My problem is that when I flash CyanMod 10 it stucks on boot logo , 10.1 fails during flashing and tonyp;s 10.2 boots to setup wizard and then I get a wizard crash message. Also SlimRom 4.4 sticks in boot logo .
I can install MOKEE rom ok ( which I like alot ) and also Optix.
The problems seem to relate to CyanMod based Roms. Do you have any ideas why this might happen
themistoklisv said:
Hi all,
I have flashed many roms on my LG 2X and lastly I have tried to flash SlimRom 4.4 but stuck to boot logo. I have read the thread and that seems to be a problem for some users since this is a test rom.
What I want to know is this:
I have used for some time tonyp's 10.2 rom which I liked alot. But then used AIO tool and NVFlsh to repartition my phone.
Last time I used AIO and partitioned my phone to NBTL, unlocked with TWRP 2.6. My problem is that when I flash CyanMod 10 it stucks on boot logo , 10.1 fails during flashing and tonyp;s 10.2 boots to setup wizard and then I get a wizard crash message. Also SlimRom 4.4 sticks in boot logo .
I can install MOKEE rom ok ( which I like alot ) and also Optix.
The problems seem to relate to CyanMod based Roms. Do you have any ideas why this might happen
Click to expand...
Click to collapse
+1
No one??
Sent from my LG-P990 using Tapatalk
Try another recovery...
I did, I also tried unbrick, not much luck
Sent from my washing machine
So I have tried cwm 5 and 6, twrp, cannot setup cwm touch , also tied unbrick, AIO and NVFlash to restore to 28v.I managed to setup my phone to cyanogen mod but with the old bootloader and when I repartitioned to new I had the same problems. Any ideas?
Sent from my washing machine
Sorry i don't know how i can help you...
Anyone else ?
Sent from my washing machine
Maybe u got a bad baseband?
Wysłane z mojego LG-P990 przy użyciu Tapatalka
Ahh baseband...that may do the trick. I remember I installed some baseband 1-2 years ago but did not do anything with baseband since. I will give it a try. Thank you
Sent from my washing machine
Which os are you using. If windows 8 you should remove driver signature as the first point. Also make sure you use usb2.0 and a proper cable and no usb hub.
I don't use PC to flash, I flash from recovery , I only use my phone
Sent from my washing machine
Well, you have to use computer to flash baseband, nvflash rom and also kdz and smartflash. I suggest you try smartflash for baseband and nvflash for rom. Then your phone should be good.
I will try to flash baseband ( I just saw I have v10) .thank you guys with will post if it works
Sent from my washing machine
cm 11 help
hi all,
Could anyone help in that,
I would like to try the newest
cm-11-20140509-UNOFFICIAL-p990.zip
but i can't flash it. its stops.
I have twrp.
There is any method/trick to make it work?
Change/delete/overwrite files in the zip?
I can`t attach to the computer so I can`t change the twrp to cwm
and I can`t use the AIO toolkit, because it doesn`t recognise the
PC. Suddenly just gone this part of the usb.
Thank you for the answer/s and help.
Have a nice day.
Rspct!
lewis8228 said:
hi all,
Could anyone help in that,
I would like to try the newest
cm-11-20140509-UNOFFICIAL-p990.zip
but i can't flash it. its stops.
I have twrp.
There is any method/trick to make it work?
Change/delete/overwrite files in the zip?
I can`t attach to the computer so I can`t change the twrp to cwm
and I can`t use the AIO toolkit, because it doesn`t recognise the
PC. Suddenly just gone this part of the usb.
Thank you for the answer/s and help.
Have a nice day.
Rspct!
Click to expand...
Click to collapse
Could you provide more details? What error do you get? Have you chosen the correct bootloader version?
cm11 help
rugglez said:
Could you provide more details? What error do you get? Have you chosen the correct bootloader version?
Click to expand...
Click to collapse
Hi,
thanks for the quick reply.
the message is the next
error executing updater binary in zip
so maybe need to manipulate the file somewhere.
just like when you want to install the tonyps 0217
need to delete the setupwizard.apk otherwise freeze at first screen.
so do you have any idea why get this message?
how can i know the correct bootloader?
thank you.
cheers!
Tell us how looks your logo at start when you are booting its a white or a colored one
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
For cm11 u need new bootloader (the colored)
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
cm 11 help
Wooby said:
Tell us how looks your logo at start when you are booting its a white or a colored one
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
For cm11 u need new bootloader (the colored)
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
Click to expand...
Click to collapse
Hi,
I have colored one when its booting.
I have already the tonyp's 20140217 version on it.
It works fine a cuple of things what is a bit annoying
like wifi sometimes turns off, sometimes the touchscreen doesen`t sens
yeah and the camera but for that is no remedy... ((
I live with this for a while
so I just wanna try the new one maybe fixed these things.
do you have any idea how can install with just flash on the phone?
thanks for the help.
have a nice day....
Ok download the recovery files from evils thread put them in aio toolkit folder search there for another recoveries and put it there next change your recovery with the awesome toolkit
After this flash the rom and kernel and gapps and it should work
If not ask evil how to do it
Have a nice day
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
---------- Post added at 01:32 PM ---------- Previous post was at 01:31 PM ----------
Ah i see it now you can do it only on your phone? Sorry if yes ;(
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
* At first, i would say, that i am not responsible for any action you do, since downloading attached files. Everything you do with files or advices in this thread, you do on your own responsibility.
This is ONLY for LG L90 D405N phone, not any other version of LG L90. Flashing attached ROM to any other device than LG L90 D405N will probably brick your phone!
Now to the point:
I somehow managed to softbrick my phone the day i bought it, and only possibility for me was to flash custom rom. But any of the available custom rom's has caught my heart, so i decided to get back to Stock. As i found, there was only old v10A version flashable available to download on internet, or possibility to flash original firmware from KDZ file via USB. Since original firmware KDZ file flashing via USB was not working for me (still don't know why), and v10A is way too old (current version is v10D) i extracted actual v10D original firmware KDZ file and made it flashable via recovery (CWM, TWRP). Of course you need CWM or TWRP first to flash this. I assume you already got it. If you don't, just google it, how to flash custom recovery on your phone.
Lollipop 5.0.2 Download:
LG L90 D405N v20A Stock rom
http://ulozto.cz/xFZyFfny/lg-d405n-stock-v20a-zip
(Click on zip archive picture, then write down captcha and click on "Stáhnout" bellow)
After flashing Lollipop Stock Rom on previous KitKat or KitKat based Rom, you need to flash Lollipop Bootstack as well, or you won't be able to use your mobile data!!!
You can get D405n Lollipop Bootstack file here:
http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632
Kitkat 4.4.2 Download:
LG L90 D405N v10D Stock rom
http://www.mediafire.com/download/myakvyqwmib9q0q/D405N_Stock_v10D.zip
or
http://ulozto.cz/xmffYFiW/d405n-stock-v10d-zip
(Click on zip archive picture, then write down captcha and click on "Stáhnout" bellow)
nice idea but there is no file
Dangerous File Blocked
The file you attempted to download was determined to be dangerous. For your protection, MediaFire does not enable distribution of dangerous files.
Still have questions, or think we've made a mistake? Please contact support for further assistance.
Click to expand...
Click to collapse
redcom7 said:
nice idea but there is no file
Click to expand...
Click to collapse
Ok, i uploaded it into another filehosting site. It is in czech language, instrucitons on how to download are bellow link in original post. Hope it works now
MichailCZ said:
Ok, i uploaded it into another filehosting site. It is in czech language, instrucitons on how to download are bellow link in original post. Hope it works now
Click to expand...
Click to collapse
works good now thank you ... my wife's l90 is rooted and with custom recovery ...
can i dirty flash this one just to have the latest rom ???
another thought is to flash slimrom with knock on for more speed .....
but thank you for this ..
redcom7 said:
works good now thank you ... my wife's l90 is rooted and with custom recovery ...
can i dirty flash this one just to have the latest rom ???
another thought is to flash slimrom with knock on for more speed .....
but thank you for this ..
Click to expand...
Click to collapse
This is clean Stock rom without any intervention, so dirty flash should work on previous stock rom. But i highly recommend clean flash, just to be sure, everything works smooth. You won't lose your custom recovery, but you will have to root again.
MichailCZ said:
This is clean Stock rom without any intervention, so dirty flash should work on previous stock rom. But i highly recommend clean flash, just to be sure, everything works smooth. You won't lose your custom recovery, but you will have to root again.
Click to expand...
Click to collapse
@MichailCZ it seems lollipop was released for D405n in India, Romania and other countries... will you post it here? if i have your last rom, will i get it via OTA (once released)? Thank you
giamanto said:
@MichailCZ it seems lollipop was released for D405n in India, Romania and other countries... will you post it here? if i have your last rom, will i get it via OTA (once released)? Thank you
Click to expand...
Click to collapse
Yes, I will put D405n Lollipop Stock Rom, flashable via custom recovery, here.
Wow perfect! Anybide about ETA? Always thank you @MichailCZ
Sent from my LG-D405 using XDA Free mobile app
Well, you can't get update via OTA, since you are rooted.
But do you think that if I remove root I will already have the update?
Sent from my LG-D405 using XDA Free mobile app
giamanto said:
But do you think that if I remove root I will already have the update?
Sent from my LG-D405 using XDA Free mobile app
Click to expand...
Click to collapse
Well, the question is, how do you remove root. If by "unroot" ability from SuperSU app, it won't work. How to unroot for sucesfully OTA update, I don't know to be honest.
What if i flash your ROM from zero wiping everything. I will not have root permission... Right?
Sent from my LG-D405 using XDA Free mobile app
giamanto said:
What if i flash your ROM from zero wiping everything. I will not have root permission... Right?
Sent from my LG-D405 using XDA Free mobile app
Click to expand...
Click to collapse
Well, that actually should work, but i can't guarentee that.
OK... Once done, do you think it will update to lollipop? Do you have lollipop?
Sent from my LG-D405 using XDA Free mobile app
I am also waiting for @MichailCZ to upload here the new lollipop .zip file to upgrade my wife's L90 405n as i allready flash the previous rom and all are very stable and fast ...
but as i can see we have to wait to have the LG official release at first
So, we finally have Official lollipop for all variants from a while now.
Maybe someone could post the flashable .zip for D405N Stock Lollipop, as I don't really like to unroot and Bootloader lock flash kdz then unlock etc. It's messy any could brick device, even if I did it successfuly from the first time...
freeman94 said:
So, we finally have Official lollipop for all variants from a while now.
Maybe someone could post the flashable .zip for D405N Stock Lollipop, as I don't really like to unroot and Bootloader lock flash kdz then unlock etc. It's messy any could brick device, even if I did it successfuly from the first time...
Click to expand...
Click to collapse
It cant be done so easily because stock LP is version 20 baseband and stock KK is version 10.. Nevertheless cm12.1 is way better(no ir and bad camera only issues on d405n) and its still in v10 baseband..
Enviado do meu LG-D405n através de Tapatalk
Warimation said:
It cant be done so easily because stock LP is version 20 baseband and stock KK is version 10.. Nevertheless cm12.1 is way better(no ir and bad camera only issues on d405n) and its still in v10 baseband..
Enviado do meu LG-D405n através de Tapatalk
Click to expand...
Click to collapse
So you suggest to flash cm12 ? And we do not have to wait for LP zip?
redcom7 said:
So you suggest to flash cm12 ? And we do not have to wait for LP zip?
Click to expand...
Click to collapse
Yes. Just make sure to backup your phone first.. Go here for 1st time
Quarx.cm-for.us/device-w7.html
Then you will have daily updates on phone.
For gapps
Forum.xda-developers.com/Android/software/gapps-google-apps-minimal-edition-t2943330
(dont forget to install 5.1 gapps)
Enviado do meu LG-D405n através de Tapatalk
Warimation said:
It cant be done so easily because stock LP is version 20 baseband and stock KK is version 10.. Nevertheless cm12.1 is way better(no ir and bad camera only issues on d405n) and its still in v10 baseband..
Enviado do meu LG-D405n através de Tapatalk
Click to expand...
Click to collapse
I think it can be done quite easy.