Database Develop

[URGENT] [Q]Fully bricked?!??!

i tried to downgrade my Samsung galaxy s i9000 with this guide:
theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/ (copy & paste in the address bar)
but in the middle of the flashing the ezodin just stopped and got stuck (during the file "factoryfs.rfs")
so i have waited something like an hour and a half but it didn't help so i did what my friends told me and shot-off my SGS then when i tried to power it on again it just stayed like it's off- black screen, wont light, wont go either to download or recovery mod
what should i do!?!?!? even when i eject the battery it won't turn on!!

please help me !!! im clueless and my dad will kill me if i'll tell him

please help me!!! im sorry that i kinda spamming this thread nut i must figure it out

Read this thread. Maybe it might help.

yea its bricked too bad.. but dont worry try usb jig(search it here in xda)..i'm sure ur problem will b solved

hard brick
Hello
it looks like you r hard bricked.
your bootloader is toust.
you still can fix it with riff jtag.
look it up
hope it helps.
I also bricked my captivate.

hi mike i'm from israel too[= do u know any store that sells that "jig" thing?

xpboy7 said:
hi mike i'm from israel too[= do u know any store that sells that "jig" thing?
Click to expand...
Click to collapse
you can get it on amazon or they are very easy to make with basic soldering skills

[Q] Would anybody plz help me ???

First of all im so sorry that my first post is that i need help.
Second i bricked my galaxy tab p1000 GSM Carrier while updating it to 2.3.3
and now stucked at hard brick. i searched the internet and found nothing that could help me out until i got in here . so is there is a way to fix without using jtag riff box cuz it didnt worked for me and if there is would you plz guide me to step by step guide and btw iam good at soldering so there is no prob with me .

LOOOOOOOOOOL 79 VIEWS AND NO REPLAY
ALL I need is step by step guide to unbrickable mod ??? plz help

lord-ghost said:
LOOOOOOOOOOL 79 VIEWS AND NO REPLAY
ALL I need is step by step guide to unbrickable mod ??? plz help
Click to expand...
Click to collapse
If you bricked following an official upgrade, contact Samsung.
If you bricked because you didn't follow a guide properly, or did not know what you were doing, then your mostly on your own.
I highly doubt your the 1st person to do this, and I would take a guess that there exists a guide or method to unbrick.
My advice to you is strangely the first rule of XDA, Search. The information is there, you just need to find it.

Hard Brick?
Is it hard bricked or soft bricked?
Can you get to the download screen by pressing power and vol down at the same time? Or can you get to the computer / exclamation mark screen? If you leave the phone to charge overnight?
That would be soft bricked.
If you can't get to either of those then you are prob hard bricked and will need serious help. But there are people who can help you out on these forums. I remember seeing someone in the U.S. who had a JTAG and charged $50. If you're in Europe that's probably not a solution though!

Try here
...and as per post #3 you could search yourself

Help please, i killed my phone

Hello every1, please help....i think i broke my phone for good ....i instaled cm9 without flashing a kernel before...studip thing to do, i don't know why i did it, didn't read instruction, just downloaded the ROM
Now the phone won't budge, it keep turning on, it don't load into anything no rom, no recovery, i tryed to connect him with sony update and unroot it in order to bring stock rom up, but PC don't see the phone couse it didn't loaded into ROM....
Any suggestion before i trash it into garbage.....many thx

Flash 2.1 ROM ftf file with flash tool.
Wait I get you the link..
Sent From My W8 Using Tapatalk

Here...
http://www.mediafire.com/?eca0sualnao4c4c
After flashing, you just need to root again...
Sent From My W8 Using Tapatalk

Delta Mykos said:
Hello every1, please help....i think i broke my phone for good ....i instaled cm9 without flashing a kernel before...studip thing to do, i don't know why i did it, didn't read instruction, just downloaded the ROM
Now the phone won't budge, it keep turning on, it don't load into anything no rom, no recovery, i tryed to connect him with sony update and unroot it in order to bring stock rom up, but PC don't see the phone couse it didn't loaded into ROM....
Any suggestion before i trash it into garbage.....many thx
Click to expand...
Click to collapse
leave batterry and then take back, try to flash with PC companion (back to esclair),,,
don't be affraid, just conect it.,.,,
(because i done this experience month yesterday.,.
#sorry my bad english.,.

well ur a murderer and ull go to jail! lol jk... hope u bring ur phone back to life...
Sent from my MB526 using xda premium

Delta Mykos said:
Hello every1, please help....i think i broke my phone for good ....i instaled cm9 without flashing a kernel before...studip thing to do, i don't know why i did it, didn't read instruction, just downloaded the ROM
Now the phone won't budge, it keep turning on, it don't load into anything no rom, no recovery, i tryed to connect him with sony update and unroot it in order to bring stock rom up, but PC don't see the phone couse it didn't loaded into ROM....
Any suggestion before i trash it into garbage.....many thx
Click to expand...
Click to collapse
No dont throw your phoe in garbage..
Visit this link
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507

This Called Soft-Bricked. You Can Fix It Yourself. Don't Worry. I Experience It 2Days Ago. Which My First Brick. And I Was Panic That Time. But With The Help Of XDA Member My Phone Back Alive Again

JiaYong said:
This Called Soft-Bricked. You Can Fix It Yourself. Don't Worry. I Experience It 2Days Ago. Which My First Brick. And I Was Panic That Time. But With The Help Of XDA Member My Phone Back Alive Again
Click to expand...
Click to collapse
When using PCC , don't click on "Update Phone". Your phone won't be recognized.
Click on "Repair Phone" , and follow instructions.

If every thing fails which is doubtfull send it to sony

Problem solved!
Thx u all for helping, harshitgroup your link was proved to be most valuable....
Thank u very much guys!!!!

Welcome ! You got your phone alive?

[Q] x8 problem with installation of minicm10

hello there guys , i have one sony ericsson xperia x8 and i wear the ginger dx rom . i had some problems and i decide to put the minicm10 . i installed it but before the mobile open , it stucked at the sony ericsson logo . I cant turn it on or put it at cwm ,
please i need your help because my wife will kill me.

se logo? it means you're on stock kernel. the rom requires a custom kernel for it to work. use pcc to repair your phone.
Sent from my rooted tomato using tapatalk

ok but my phone didnt start so the pcc doesnt start too , the phone stucks at the sony ericsson logo before it opens. any ideas for the pcc?
edit* when i connect the phone to the pcc , at the beggining the pcc recognize the phone but after 2-3 sec the phone disconnects.

loretzos said:
ok but my phone didnt start so the pcc doesnt start too , the phone stucks at the sony ericsson logo before it opens. any ideas for the pcc?
Click to expand...
Click to collapse
install pcc.
download flashtool.
download x8/w8 stock rom.
install drivers in flashtool's /drivers folder.
run flashtool and follow the instructions.
you'll be back on stock rom without root access.
Sent from my rooted tomato using tapatalk

Hi,
Don't worry you can easily fix your phone.(y u afraid your wife?? Lol, typical husband )
Follow the instructions of the second post in this ↓ thread to fix it.
http://forum.xda-developers.com/showthread.php?t=1481630
When you want to install a new rom its very important to read the installation instructions

stamatis said:
Hi,
Don't worry you can easily fix your phone.(y u afraid your wife?? Lol, typical husband )
Follow the instructions of the second post in this ↓ thread to fix it.
http://forum.xda-developers.com/showthread.php?t=1481630
When you want to install a new rom its very important to read the installation instructions
Click to expand...
Click to collapse
thanx my friend.. my wife is smiling!

loretzos said:
thanx my friend.. my wife is smiling!
Click to expand...
Click to collapse
Dude you may want to report your wife to the police,how can you live with the danger of killing you???
Lol,I'm kidding of course,I'm glad I helped you and I'm glad I made your wife smile

[Q] Dead Brick X8/W8 repair?

Hello everyone. im using xperia x8. i try to unlock bootloader. my phone 11W43. after trying to unlock, suddenly phone dead. No LED, Cant charge, No respond at all. Any solution how to repair this kind of problem? PLS HELP

hi
emyfella said:
Hello everyone. im using xperia x8. i try to unlock bootloader. my phone 11W43. after trying to unlock, suddenly phone dead. No LED, Cant charge, No respond at all. Any solution how to repair this kind of problem? PLS HELP
Click to expand...
Click to collapse
you need jtag

kks111 said:
you need jtag
Click to expand...
Click to collapse
Is there any other way without using Jtag?

why don't u read 1st how to unlocking your bootloader? unlocking bootloader are not reccommended for W29 and above,
now you've done it,u can read how to unbrick and bring it back to life. try looking it pal. I've done it (unbricking) too many times

4thflicks said:
why don't u read 1st how to unlocking your bootloader? unlocking bootloader are not reccommended for W29 and above,
now you've done it,u can read how to unbrick and bring it back to life. try looking it pal. I've done it (unbricking) too many times
Click to expand...
Click to collapse
You've unbricked a hard bricked phone? Would love to see a tutorial for that.

cascabel said:
You've unbricked a hard bricked phone? Would love to see a tutorial for that.
Click to expand...
Click to collapse
nope, just soft-bricked of course. since mine are W12.
I've stopping using shakira since it's battery died. I've replaced it and give it to my brother with XSoul ROM.

if u want upgrading your phone, always to Read all the requirement first
like this THREAD