So i recently installed the Xposed Installer to my rooted Xperia V, running stock JB 4.3 and FW:9.2.A.2.5
Then i naturally wanted to install some moduls, but then i saw the prompt saying that in some cases, installation of that could cause a bricked or bootlooped phone. So have any of you guys using the same firmware as I and using Xposed Framework experienced any problems? Or is it 100% safe to install the framework on it without needing to buy a new phone.
Don't want to take the risk before i hear from you, because I don't really have money enough to buy a new phone r8 now, so won't brick my V.
You should be fine if you on 4.3. It says that so they can't be held responsible. Just make you sure you install compatible modules for your device. You should be fine
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
ryant100 said:
You should be fine if you on 4.3. It says that so they can't be held responsible. Just make you sure you install compatible modules for your device. You should be fine
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
So nice then! Is it any method to check if a module is compatibile with my device? (can't find such information on the module's site in the Xposed explorer tho)
Still wanna hear from someone who actually uses Xperia V, want to be 100% sure on that Can't lose this phone, really.
Some settings in certain modules might cause a bootloop, but you can easily revive the phone by pressing the power button multiple times during boot. This will disable Xposed.
Also, a locked bootloader phone can hardly be bricked. You can always flash a stock ftf with Flashtool and the phone will work again.
XV user here, by the way.
WhiteNeo said:
Some settings in certain modules might cause a bootloop, but you can easily revive the phone by pressing the power button multiple times during boot. This will disable Xposed.
Also, a locked bootloader phone can hardly be bricked. You can always flash a stock ftf with Flashtool and the phone will work again.
XV user here, by the way.
Click to expand...
Click to collapse
Thanks for the answer ;D
So if i understand you the right way, if i don't have unlocked bootloader it is a very tiny chance of bricking my phone, and if my phone bootloops it could be stopped by pressing the power button a few times. But do i need a software for that like CWM/recovery installed to stop Xposed during bootloop, or is it just an function Xposed has itself?
SnobaTamba said:
Thanks for the answer ;D
So if i understand you the right way, if i don't have unlocked bootloader it is a very tiny chance of bricking my phone, and if my phone bootloops it could be stopped by pressing the power button a few times. But do i need a software for that like CWM/recovery installed to stop Xposed during bootloop, or is it just an function Xposed has itself?
Click to expand...
Click to collapse
Xposed does provide a flashable zip for disabling, but the emergency disable function is already included without requiring a custom recovery.
WhiteNeo said:
Xposed does provide a flashable zip for disabling, but the emergency disable function is already included without requiring a custom recovery.
Click to expand...
Click to collapse
OMG man thank you sooo much for helping me Going to try it out, let us just hope i don't ruin my phone :victory:
Just have one last question for you. Is it the framework or the modules themselves causing brick/bootloop? Or easier said, could i install the framework without any negative effect, only the modules that could destroy the phone?
SnobaTamba said:
OMG man thank you sooo much for helping me Going to try it out, let us just hope i don't ruin my phone :victory:
Just have one last question for you. Is it the framework or the modules themselves causing brick/bootloop? Or easier said, could i install the framework without any negative effect, only the modules that could destroy the phone?
Click to expand...
Click to collapse
"Destroy" is a slightly too drastic expression.
But yes, it's some incompatible modules that cause those issues. However, most of the time, you will rather face repeated force closes than a bootloop, when using the wrong stuff
And Xposed itself can be installed without risk, won't do any harm.
WhiteNeo said:
"Destroy" is a slightly too drastic expression.
But yes, it's some incompatible modules that cause those issues. However, most of the time, you will rather face repeated force closes than a bootloop, when using the wrong stuff
And Xposed itself can be installed without risk, won't do any harm.
Click to expand...
Click to collapse
Thank you so much for helping me man!
Related
What's the point of rooting an active if you can't do anything with it. Now you can't even get the new at&t update. Someone explain what the reason is please besides the thrill of pointless tinkering.
psideburns said:
What's the point of rooting an active if you can't do anything with it. Now you can't even get the new at&t update. Someone explain what the reason is please besides the thrill of pointless tinkering.
Click to expand...
Click to collapse
I do lots of stuff with my rooted S4A. Wanam Xposed, Pie Controls, frozen ATT bloat and Avast Firewall to name a few things. It even text messages and makes phone calls!
New update=yawn. 4.3 isn't a big deal (unless you want a Gear).
psideburns said:
What's the point of rooting an active if you can't do anything with it. Now you can't even get the new at&t update. Someone explain what the reason is please besides the thrill of pointless tinkering.
Click to expand...
Click to collapse
It depends on what you're trying to accomplish. I personally have root so I can fully utilize Titanium Backup to backup my entire phone, block ads, use Folder Mount to force files to be saved to my external SD card, install Cerberus as a system app to utilize more of its features, and install Xposed Framework and Xposed Modules to endlessly customize my phone and add additional functionality to it. It's up to you whether or not you think rooting is worth it. With that said you can always update to the official AT&T 4.3 firmware using the Odin files found in this thread.
Good points for your purposes granted. But I loved to change roms on my gs2 until I found cm, then I stuck with that one as my fav. I'm just frustrated that it is not that easy or even possible anymore, at least with this phone that I like and plan on keeping for a while.
psideburns said:
Good points for your purposes granted. But I loved to change roms on my gs2 until I found cm, then I stuck with that one as my fav. I'm just frustrated that it is not that easy or even possible anymore, at least with this phone that I like and plan on keeping for a while.
Click to expand...
Click to collapse
Have you looked at SafeStrap?
Devo7v said:
It depends on what you're trying to accomplish. I personally have root so I can fully utilize Titanium Backup to backup my entire phone, block ads, use Folder Mount to force files to be saved to my external SD card, install Cerberus as a system app to utilize more of its features, and install Xposed Framework and Xposed Modules to endlessly customize my phone and add additional functionality to it. It's up to you whether or not you think rooting is worth it. With that said you can always update to the official AT&T 4.3 firmware using the Odin files found in this thread.
Click to expand...
Click to collapse
Hey Devo, you run xposed framework on the stock rom with no issues? I had some problems with it on my sgh-i537 and some of the modules wouldn't work at all. If I tried to install the hypderive device tools(shutdown) menu, when I use the shutdown button my phone locks up and just shuts off, no menu ever appears. I really like alot of the hyperdrive functions, I'd love to be able to add the hyperdrive tweaks too, but never had any luck there either.
As concern me I will sell my s4 active No Roms No updates :'(
Sent from my GT-I9295 using xda app-developers app
monkeyhouse said:
Hey Devo, you run xposed framework on the stock rom with no issues? I had some problems with it on my sgh-i537 and some of the modules wouldn't work at all. If I tried to install the hypderive device tools(shutdown) menu, when I use the shutdown button my phone locks up and just shuts off, no menu ever appears. I really like alot of the hyperdrive functions, I'd love to be able to add the hyperdrive tweaks too, but never had any luck there either.
Click to expand...
Click to collapse
Yeah, I run Xposed on my stock ROM. The only issue I ever had was a few days ago when I updated XPrivacy and the phone refused to boot. I had to flash the Xposed disabler with SafeStrap. I run the GPE ROM in slot 1 so I can't speak to the way Hyperdrive works. Sorry I can't be more helpful.
Devo7v said:
Yeah, I run Xposed on my stock ROM. The only issue I ever had was a few days ago when I updated XPrivacy and the phone refused to boot. I had to flash the Xposed disabler with SafeStrap. I run the GPE ROM in slot 1 so I can't speak to the way Hyperdrive works. Sorry I can't be more helpful.
Click to expand...
Click to collapse
Ok, I see. so whatever is in your slots can affect your stock rom as well? I also ran GPE in another slot for a while and I liked it, but with the aroma installer and the hyperdrive tweaks, it really is something I'd like to stick with. I wish I understood more about what is shared and what isn't between roms in slots and the deal with the locked bootloader. We're a long way from Windows Toto, lol. Then again, I do networking, not programming so much.
So, do you run the advanced power menu module on your stock ROM? I really like the HyperDrive version, I think it's called HyperDrive Device Menu or something.
I want to say I installed wanam and xposed from apk files, no flashing. Maybe I need to start there. Thanks again.
monkeyhouse said:
Ok, I see. so whatever is in your slots can affect your stock rom as well? I also ran GPE in another slot for a while and I liked it, but with the aroma installer and the hyperdrive tweaks, it really is something I'd like to stick with. I wish I understood more about what is shared and what isn't between roms in slots and the deal with the locked bootloader. We're a long way from Windows Toto, lol. Then again, I do networking, not programming so much.
So, do you run the advanced power menu module on your stock ROM? I really like the HyperDrive version, I think it's called HyperDrive Device Menu or something.
I want to say I installed wanam and xposed from apk files, no flashing. Maybe I need to start there. Thanks again.
Click to expand...
Click to collapse
I don't think that the Rom slots impact each other unless you are running low on space.
I don't have am advanced power menu and I'm not sure what the Hyperdrive one looks like. That said Wanam had a couple of options that extend the power menu that are worth a try.
Everything I've installed has been by directly installing an apk. Except for dark dialer, dark contacts, and call recording.
Devo7v said:
I don't think that the Rom slots impact each other unless you are running low on space.
I don't have am advanced power menu and I'm not sure what the Hyperdrive one looks like. That said Wanam had a couple of options that extend the power menu that are worth a try.
Everything I've installed has been by directly installing an apk. Except for dark dialer, dark contacts, and call recording.
Click to expand...
Click to collapse
thanks for the info man. I will try the wanam menu and see, think I tried it once, but still had the issue with the button locking up. One thing for sure, installing these other ROM's gives me plenty of ideas of how to change my stock ROM! BTW, I love D.C. saw the FW's at the National Harbor last year, good time. There's an Amtrak that runs direct from here and you can drink on the train!
Devo7v said:
Yeah, I run Xposed on my stock ROM. The only issue I ever had was a few days ago when I updated XPrivacy and the phone refused to boot. I had to flash the Xposed disabler with SafeStrap. I run the GPE ROM in slot 1 so I can't speak to the way Hyperdrive works. Sorry I can't be more helpful.
Click to expand...
Click to collapse
Hey Devo, how do you un-flash something? I flashed a accuweather transparent widget that doesn't work and I think it might have stopped my air gesture from working, just working back from things I have changed recently and that is one of them.
monkeyhouse said:
Hey Devo, how do you un-flash something? I flashed a accuweather transparent widget that doesn't work and I think it might have stopped my air gesture from working, just working back from things I have changed recently and that is one of them.
Click to expand...
Click to collapse
You need to open up the zip file and look inside the folders to see what files are flashed and where they ate flashed. This will tell you what files were changed our added then you can manually remove them. I would also ask the creator to post a zip that removes the necessary files to return to stock. It should be easy enough.
Devo7v said:
You need to open up the zip file and look inside the folders to see what files are flashed and where they ate flashed. This will tell you what files were changed our added then you can manually remove them. I would also ask the creator to post a zip that removes the necessary files to return to stock. It should be easy enough.
Click to expand...
Click to collapse
thanks man, I know that wasn't your issue and I really appreciate your response.
psideburns said:
What's the point of rooting an active if you can't do anything with it. Now you can't even get the new at&t update. Someone explain what the reason is please besides the thrill of pointless tinkering.
Click to expand...
Click to collapse
Quite a few apps don't work without root access. Plus it is necessary to be able to use tethering without a separate plan. Battery doctor, quickboot, app quarantine, and titanium backup are just a few on mine.
Hi guys. I'm going to apologize in advance that I am a noob when it comes to hacking and rooting. I've successfully gained root access to my Verizon LG G2 using my computer. I used originally used an app called G2 Tweaksbox that allows you to change a lot of things about the phone. But then I wanted to try the famous CM 11. I did the tutorial on youtube, but I didn't install the GAPPS zip. Then I rebooted my phone and now it became stuck on the LG startup screen but looping over and over again. I've tried to hard reset it but it won't work. Is there any possible way to fix this, because I used another family members upgrade to get this phone after I broke my last one? Please don't judge but please help me if you can.:crying::crying::crying:
DevStep said:
Hi guys. I'm going to apologize in advance that I am a noob when it comes to hacking and rooting. I've successfully gained root access to my Verizon LG G2 using my computer. I used originally used an app called G2 Tweaksbox that allows you to change a lot of things about the phone. But then I wanted to try the famous CM 11. I did the tutorial on youtube, but I didn't install the GAPPS zip. Then I rebooted my phone and now it became stuck on the LG startup screen but looping over and over again. I've tried to hard reset it but it won't work. Is there any possible way to fix this, because I used another family members upgrade to get this phone after I broke my last one? Please don't judge but please help me if you can.:crying::crying::crying:
Click to expand...
Click to collapse
Which cm did you try? The official or JackpotCalvin's?
Sent from my VS980 4G using XDA Premium 4 mobile app
njstein said:
Which cm did you try? The official or JackpotCalvin's?
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried the official nightly version. Thanks for the quick reply.
DevStep said:
I tried the official nightly version. Thanks for the quick reply.
Click to expand...
Click to collapse
If you did a nano backup then restore that if not you are going to have to do the revert back to stock. But for your information for later on. If you install xposed with any modules. Make sure to properly Uninstall all them before you change roms or make any changes
One last thing the official cm rom is no longer supported. No one to work on the g2 anymore
simple_fear85 said:
If you did a nano backup then restore that if not you are going to have to do the revert back to stock. But for your information for later on. If you install xposed with any modules. Make sure to properly Uninstall all them before you change roms or make any changes
One last thing the official cm rom is no longer supported. No one to work on the g2 anymore
Click to expand...
Click to collapse
Why would you need to uninstall Xposed modules? Everything gets wiped anyway.
mjones73 said:
Why would you need to uninstall Xposed modules? Everything gets wiped anyway.
Click to expand...
Click to collapse
I had issues with my phone messing up if I kept xposed with modules installed still when I did clear all and installed a rom. Not sure why but I Uninstall now and no issues anymore. I actually lost knock on once leaving xposed installed. I confirmed it with going back to my nano Uninstalling xposed and knock on worked fine
simple_fear85 said:
I had issues with my phone messing up if I kept xposed with modules installed still when I did clear all and installed a rom. Not sure why but I Uninstall now and no issues anymore. I actually lost knock on once leaving xposed installed. I confirmed it with going back to my nano Uninstalling xposed and knock on worked fine
Click to expand...
Click to collapse
That's an odd one since Xposed runs in /system. Were you wiping /system and /data without restoring anything on a clean install?
mjones73 said:
That's an odd one since Xposed runs in /system. Were you wiping /system and /data without restoring anything on a clean install?
Click to expand...
Click to collapse
I did a full wipe with Clean install
simple_fear85 said:
If you did a nano backup then restore that if not you are going to have to do the revert back to stock. But for your information for later on. If you install xposed with any modules. Make sure to properly Uninstall all them before you change roms or make any changes
One last thing the official cm rom is no longer supported. No one to work on the g2 anymore
Click to expand...
Click to collapse
Yeah I downloaded xposed and I got the latest module for support. I had no idea that you needed to delete them after you wanted to download a new ROM. Okay so do I fix this? My phone is stuck looping on the LG bootup message and the only way I can stop it is by hard reseting it and that just turns it off. How do I access it on my computer and reflash the stock? Please help.
DevStep said:
Yeah I downloaded xposed and I got the latest module for support. I had no idea that you needed to delete them after you wanted to download a new ROM. Okay so do I fix this? My phone is stuck looping on the LG bootup message and the only way I can stop it is by hard reseting it and that just turns it off. How do I access it on my computer and reflash the stock? Please help.
Click to expand...
Click to collapse
Follow the stock restore guide in the general section.
DevStep said:
Yeah I downloaded xposed and I got the latest module for support. I had no idea that you needed to delete them after you wanted to download a new ROM. Okay so do I fix this? My phone is stuck looping on the LG bootup message and the only way I can stop it is by hard reseting it and that just turns it off. How do I access it on my computer and reflash the stock? Please help.
Click to expand...
Click to collapse
Once your phone is off, hold up and plug it in to your computer. This should put you in download mode. Hopefully you have all the drivers installed...
Sent from my VS980 4G using XDA Premium 4 mobile app
Is there a working version on lollipop update?
bump
what is so hard to understand? xposed for lollipop currently needs a custom recovery to install. there is no working custom recovery for the z3c yet.
Sent from my D5803
And why not looking around in the XPOSED section. And there is an alpha version out. so Yes, there is.
Well I installed a prerooted version of Lollipop on my Z3 D6603, and installed the Xposed Framework while in recovery. It worked before I tried to install Lolistat, after which I was stuck in a boot loop. So no, it doesn't work right now.
epic118 said:
Well I installed a prerooted version of Lollipop on my Z3 D6603, and installed the Xposed Framework while in recovery. It worked before I tried to install Lolistat, after which I was stuck in a boot loop. So no, it doesn't work right now.
Click to expand...
Click to collapse
ahh you tried to flash the lollipop zip along with the xposed zip and still no boot? was thinking of trying the same since after rebooting into lollipop recovery is gone
Just waitting, I want to resize navigation bar and make it the same color with app when I open app
epic118 said:
Well I installed a prerooted version of Lollipop on my Z3 D6603, and installed the Xposed Framework while in recovery. It worked before I tried to install Lolistat, after which I was stuck in a boot loop. So no, it doesn't work right now.
Click to expand...
Click to collapse
It has nothing to do with lolistat, I expect. I have a rooted D6633 running stock LP; you flash the .zip, first boot is ok (the art optimizer runs on all app) - but it starts bootlooping once you reboot after that first (successful) boot. The only thing I did was, install a bunch of updates - not even the Xposed apk.
And btw, I did that after the first attempt, during which - on first boot - I installed the apk, appopsexposed and serjar's thing, then enabled those 2 modules, plus the greenify one which already existed (I assumed it was one of those) - but nope, it wasn't, unless the framework somehow enabled the greenify one behind my back and that caused the problem (which I find rather unlikely).
mionica said:
It has nothing to do with lolistat, I expect. I have a rooted D6633 running stock LP; you flash the .zip, first boot is ok (the art optimizer runs on all app) - but it starts bootlooping once you reboot after that first (successful) boot. The only thing I did was, install a bunch of updates - not even the Xposed apk.
And btw, I did that after the first attempt, during which - on first boot - I installed the apk, appopsexposed and serjar's thing, then enabled those 2 modules, plus the greenify one which already existed (I assumed it was one of those) - but nope, it wasn't, unless the framework somehow enabled the greenify one behind my back and that caused the problem (which I find rather unlikely).
Click to expand...
Click to collapse
I posted this ages ago...I have Xposed fully working now. If you're still having problems, there are solutions.
You can either install AndroPlus Kernel, which patches the thing that breaks Xposed, or install this fix http://www.theandroidsoul.com/havin...n-your-sony-xperia-device-try-this-fix-76894/
epic118 said:
I posted this ages ago...I have Xposed fully working now. If you're still having problems, there are solutions.
You can either install AndroPlus Kernel, which patches the thing that breaks Xposed, or install this fix http://www.theandroidsoul.com/havin...n-your-sony-xperia-device-try-this-fix-76894/
Click to expand...
Click to collapse
You have to be joking.
I mean, seriously? You're pointing me to my own fix, mirrored by somebody else?! (rofl)
It's here btw, no need for externals links. And 2.1 is pretty old, too
mionica said:
You have to be joking.
I mean, seriously? You're pointing me to my own fix, mirrored by somebody else?! (rofl)
It's here btw, no need for externals links. And 2.1 is pretty old, too
Click to expand...
Click to collapse
Oh god, I wasn't joking... this is embarrassing.
I'd just like to say thanks for the fix, I guess
epic118 said:
Oh god, I wasn't joking... this is embarrassing.
I'd just like to say thanks for the fix, I guess
Click to expand...
Click to collapse
Hey, no worries It just felt pretty damn strange - "hey, use your stuff, from over there..."
Hi everyone!
I have a rooted Z3C and it is a fantastic phone, I love it. The problem is that I bought a television sport service that includes the possibility to watch games on your phone, it's called Bein Sport. This app is able to detect root and refuse to play any videos so the service I bought becomes kind of useless
The worst part is that I don't want to mess around, just want to watch games on my phone and use the service for what it was thought. Si I thought i'd give a shout here, has anyone been able to bypass that annoying feature? I don't even understand why they don't like rooted phone
thanks!
McGuigew said:
Hi everyone!
I have a rooted Z3C and it is a fantastic phone, I love it. The problem is that I bought a television sport service that includes the possibility to watch games on your phone, it's called Bein Sport. This app is able to detect root and refuse to play any videos so the service I bought becomes kind of useless
The worst part is that I don't want to mess around, just want to watch games on my phone and use the service for what it was thought. Si I thought i'd give a shout here, has anyone been able to bypass that annoying feature? I don't even understand why they don't like rooted phone
thanks!
Click to expand...
Click to collapse
There is an Xposed module for masking root on your phone, not sure if it will work or not. There is another Xposed app that offers help as well.
Installing Xposed can sometimes be tricky, make sure you find the right arm zip or you could be facing bootloops.
The place to start if you want to go down that road is here
Didgesteve said:
There is an Xposed module for masking root on your phone, not sure if it will work or not. There is another Xposed app that offers help as well.
Installing Xposed can sometimes be tricky, make sure you find the right arm zip or you could be facing bootloops.
The place to start if you want to go down that road is here
Click to expand...
Click to collapse
Hey Steve, thanks for answering. I am willing to try your solution so I read the page you showed me to install Xposed. I downloaded the last version of the ARM (note arm64, or x86), should I boot into recovery and flash it now? I reaaally don't want to mess up and have to reinstall it all! Is the Z3C part of the phones that have problems with Xposed? cheers!
McGuigew said:
Hey Steve, thanks for answering. I am willing to try your solution so I read the page you showed me to install Xposed. I downloaded the last version of the ARM (note arm64, or x86), should I boot into recovery and flash it now? I reaaally don't want to mess up and have to reinstall it all! Is the Z3C part of the phones that have problems with Xposed? cheers!
Click to expand...
Click to collapse
I use Xposed, it's very popular and works fine on the Z3c. I think the emphasis is to read about it before you do it, as many people rush in, go to downloads, install the one with the latest build number and then come crying to the forum about bootloops.
The fact that you have read ahead on the page before you did anything assures me that you won't mess it up :good:
If it reassures you, I am using xposed-v80-sdk22-arm.zip on a 5.1.1. build. But there are more recent versions out now, although I don't know what the advantages of using those are. Perhaps later versions cover the use of MM. Can anybody enlighten me on that?
Edit: Once you have flashed the installer in recovery, restart the phone and then install XposedInstaller_3.0_alpha4.apk
With that installed and running you can find the modules and install them.
Each install or change of settings requires a restart.
Didgesteve said:
I use Xposed, it's very popular and works fine on the Z3c. I think the emphasis is to read about it before you do it, as many people rush in, go to downloads, install the one with the latest build number and then come crying to the forum about bootloops.
The fact that you have read ahead on the page before you did anything assures me that you won't mess it up :good:
If it reassures you, I am using xposed-v80-sdk22-arm.zip on a 5.1.1. build. But there are more recent versions out now, although I don't know what the advantages of using those are. Perhaps later versions cover the use of MM. Can anybody enlighten me on that?
Edit: Once you have flashed the installer in recovery, restart the phone and then install XposedInstaller_3.0_alpha4.apk
With that installed and running you can find the modules and install them.
Each install or change of settings requires a restart.
Click to expand...
Click to collapse
Thanks! I'm gonna procede and give you a heads up! cheers
I am unable to flash the xposed.zip in recovery (Philz). It says "failed to set up expected mounts for install". I have tried on internal SD, external SD and even USB... any idea?
McGuigew said:
I am unable to flash the xposed.zip in recovery (Philz). It says "failed to set up expected mounts for install". I have tried on internal SD, external SD and even USB... any idea?
Click to expand...
Click to collapse
Check you have root, install SuperSU and make sure it's up to date
Didgesteve said:
Check you have root, install SuperSU and make sure it's up to date
Click to expand...
Click to collapse
Yep, installed, up do date, and some apps even use my root without any issues
If anyone comes here, here is what happened to me: I tried to install Xposed to try this trick but my phone would'nt falsh because it couldn't mount /system. I assumed that it was a problem with partitions. I tried deleting root manually but the app always found root even when I wasn't rooted anymore (beware, this app is pretty smart). I ended up having to go back to stock which sucks because the battery is really bad in comparison, but anyway I can watch football! Cheers
....!!!!PLEASE ONLY POST ABOUT XPOSED AND MODULES YOU ARE USING ON AT&T STOCK FIRMWARE NOT THE UNLOCKED U FIRMWARE AS THERE MAY BE DIFFERENCES IN EXPERIENCE AND USABILITY THAT MAY CAUSE PROBLEMS!!!!....
This thread is for anyone to posted what Xposed modules you use and if they are or are not working. It will also be a thread to let others see who are new to xposed or havent used it on their s7 edge yet what is and isn't working as well as identifying what modules should be avoided because they are causing problems with the phone ex. lag, freezing, bootloops, other. please comment what you are using along with your experience and any news related to xposed and or modules. i will (when i have time) edit this post with what i have installed what does and doesnt work as well as posting what others put here. of course there will be a working and not working section that will be updated when things break or become useable. hope this thread helps some people out and saves some time and trouble.
....AGAIN!!!!PLEASE ONLY POST ABOUT XPOSED AND THE MODULES YOU ARE USING ON STOCK AT&T FIRMWARE ONLY AS THERE CAN BE DIFFERENCES BETWEEN WHAT DOES AND DOESNT WORK ON STOCK FIRMWARE AND THE UNLOCKED U FIRMWARE!!!!....
....WORKING MODULES ARE IN POST #2....
....modules that work for me and or others....will be update as i use working modules or people post or pm working modules....i will not be including modules that do not work just to save time and space. At this point in time just assume it doesnt work unless someone can confirm it, dont want to kill your phone!!!!....
1. Greenify
2. Amplify
3. Xtouchwiz (turned some setting off that were on by default!!!! Fake system status i'm guessing is best turned off!!!!)
4. Neopower menu
rob219 said:
****ONLY ANPLIFY AND GREENIFY ARE WOTKING OUT OF THE ONES I HAVE INSTALLED IN THE PICS, ALL THE OTHER MODULES SHOWN ARE NOT WORKING AS OF NOW ON MY DEVICE****
Click to expand...
Click to collapse
Did you have any luck with RootCloak or XTouchWiz?
TehPirate_ said:
Did you have any luck with RootCloak or XTouchWiz?
Click to expand...
Click to collapse
rootcloak im unsure as i have uninstalled it (didnt need it) and xtouchwiz i hacent retried. something (maybe a setting in xtouchwiz) was giving me some sim card pop up that wouodnt go away on boot and wouod make me reboot to recovery to do something to ky sim that just failed and the pop up would be there upon boot. i had to odin to get rid of it. it happened 3 times and each time it happened i had rootcloak and xtouchwiz installed. since removing both i hacent had a problem. so no i didnt and i believe one of them caused the problem. if anyone is using both or one or the other let me know what you do and dont have enabled or disabled in each module.
rob219 said:
rootcloak im unsure as i have uninstalled it (didnt need it) and xtouchwiz i hacent retried. something (maybe a setting in xtouchwiz) was giving me some sim card pop up that wouodnt go away on boot and wouod make me reboot to recovery to do something to ky sim that just failed and the pop up would be there upon boot. i had to odin to get rid of it. it happened 3 times and each time it happened i had rootcloak and xtouchwiz installed. since removing both i hacent had a problem. so no i didnt and i believe one of them caused the problem. if anyone is using both or one or the other let me know what you do and dont have enabled or disabled in each module.
Click to expand...
Click to collapse
I appreciate your feedback. It would be inaccurate for me to reply with mine as I use the unlocked firmware. But in this case, the results were the same more or less.
TehPirate_ said:
I appreciate your feedback. It would be inaccurate for me to reply with mine as I use the unlocked firmware. But in this case, the results were the same more or less.
Click to expand...
Click to collapse
i have since installed xtouchwiz and have no problems i turned a few things off that were on by default. i turned off fake system status and the disable scaling feature that was on. it works. rootcloak i have also reinstalled but i don't think it works. im not sure, i know snapchat has problems logging in if your rooted and i am experiencing this problem with or without rootcloak so i believe it is not working but i could be wrong.
Hi, I am new to xda and Android as a whole. So I have rooted (SM-G935A) and I can't find any way to install xposed because TWRP doesnt support the snapdragon variants. Do you mind telling me how you did it?
RileyIssKing said:
Hi, I am new to xda and Android as a whole. So I have rooted (SM-G935A) and I can't find any way to install xposed because TWRP doesnt support the snapdragon variants. Do you mind telling me how you did it?
Click to expand...
Click to collapse
flashfire