[Q] Recovery Of my Galaxy Gear - Samsung Galaxy Gear

I Dont really know what happen, and i've had it in the drawer for such a while now.
I have had it rooted, and install null rom. But- it was acting up so i factory reset it a few times.
At this point i cant offically connect it with my S5. The device will pair, but the software wont completely connect.
Im probably going about this wrong, but the the guides im running into bring up completely connecting the device first. And every video i find while searching for downlaod mode are in different languages.
Thanks for any help u can give.

Well, i was able to find the download mode options.
But- i fully formatted the device, thus removing my null23.zip .
How do i install it via odin? Or do i have to start all over again and install the stock rom, re-root , etc.?

If you've twrp I think all you need to do is put null on via adb and then flash it with twrp

Related

[Q] Captivate Soft Brick - Need a rooted Odin solution.

Hi
My brother (a no-geek) has a captivate, and lives in a different city (I donot have physical access to the phone). He visited me few weeks ago and I installed CM-7 on his phone, i know my bad. Some of his videos were not working, so i asked him to update to the latest CM-7 build. He download the build, saved it on int sd_card and used ClockWork Recovery to install the selected ROM. Upon reboot it entered in never-ending splash screen. I found couple of odin ROMs, and posted him link, we tried to flash them, but no good.
Status --
The COM ports are detected, but the process at times halts at <SET PARTITION> at times at <SET UP>... at times all thread completed successful would show up as soon as hitting START.
I dont have a captivate, can someone please suggest a sure shot solution and post me a link for ODIN, with a root rom. I am using Team Whiskey on my Vibrant, and I prefer stable modified ROM because of its features and power.
I can explain him the process on skype using desktop sharing, but the ROM should be good. Thankyou very much in advance.
if he can access recovery, try wiping everything thru recovery then start again
Phone is in Soft Brick state.
Phone is in Soft Brick state. So i cannot boot into the phone and go to CW recovery.
What he needs is just a stable usb connection that's how he got to this point, bad communication between the phone and computer. On cm7 I beleive you need the nexus s drivers installed. Also make sure it's plugged into a usb port that's attached directly to the motherboard (back of pc, port 1 on laptop)
@studacris
I think the drivers are already installed good. The connection is also good, as i can the COM port detection in the ODIN, with one of the boxes changing its colour from NO-COLOUR to YELLOW-COLOUR.
I think the ROM builds are not good. They go action-less during flashing, actually nothing (progress bar) comes on phone, it keeps showing the Downloading screen, endlessly. Odin usually is stuck at at <SET PARTITION> at times at <SET UP>...
Can someone post a link for a test one click odin. Well i would prefer one click.
You did try DG's JF6 one click, thats the only one I use, how are you establishing dowload mode on the phone or are you even doing this.
REMY4223 said:
I would suggest to Odin back to stock then update to Froyo via Kies.
Click to expand...
Click to collapse
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament
Ragin Caucasian said:
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament
Click to expand...
Click to collapse
+1 If you read the OP the problem is he can't flash back to stock he is having problems flashing anything period, @ the OP correct me if I'm wrong but I have a strong hunch that you are leaving out some pretty crucial steps, I have a feeling that you are not putting the phone into download mode, I also believe that you are gonna need to make a jig and pay a visit to your brother to help him out especially if its bricked the same way mine just was flashing with cm7 roms. But if you are getting a com port to show without having to put in download mode then you are farther along in the boot process. If this is the case you may be able to adb into recovery do a full wipe excluding /boot and reflash. Will the PC recognize the phone with it in its current boot locked state? If so then recovering should be somewhat of a breeze.
http://forum.xda-developers.com/showthread.php?t=829392 read this post it may help otherwise there are tons others
- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.
viveksharma2108 said:
- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.
Click to expand...
Click to collapse
Try putting the phone into download mode after you open Odin. Which version of Odin is this? Also, installing the nightly build of CM7 again often fixes the boot loop on the newer builds. I would try that if you can get to recovery.
Sent from my SGH-I897 using XDA Premium App

Bootloop problem

Hi!
I just recieved a Galaxy S and i have a problem.
At the beggining, the phone bootloops. Then I full wipe it, so now doesn't have that problem. Now the problem is, that when it loaded and show the start settings (select lang, date, time etc.) every single application on the phone "Force Close" and the phone reboot itself and repeat the same procedure. I don't know what kernel, ROM the phone use, but i think it is the stock one (2.3.4 or 2.3.6)
I am able to go to Download Mode, but when I do that, the phone can't connect with ODIN, also my computer doesn't recognize my phone when i am in Download Mode (when i try to turn on the phone, then my computer recognize: Samsung Android USB ...)
I also tryed to change the ROM via recovery, but there i've got very few options (reboot, apply updates, wipe data, wipe cache), so i'm not able to change the ROM from there.
Please, tell me what to do.
Edit: Sorry for my bad english
I'm pretty sure you only installed the wrong USB drivers. There should be some sort of tutorial on the web to get the right drivers for an Odin access. Anyways, be sure that KIES and all child processes are killed when using Odin (use the task manager to look that up).
Feel free to ask further questions
Sent from my Gameboy Color
http://db.tt/BujOFVxz
Hey! Thanks for the drivers above. The funniest thing is that the computers in my school recognized my phone, so do ODIN. But my computer still not recognized the device. Tonight i will send files to my flashdrive so tomorrow i will flash ROM with ODIN in my school (i have an admin account ) When i get back from school, i'll post the results here.
[sorry for my bad english, again]
Hi, again! Today I messed everything up. First, i flashed with ODIN the Darky's ROM but after installation 20 minutes the phone freezed at the logo (no progress there). Then I flashed CWM with ODIN and tried to install CM10 without success. After the installation the only thing which was changed was the CWM (new version 6.x.x.x). Then I tried to flash new kernel (Semaphore_JB_2.5.0s) and now its freezes at the logo "SEMAPHORE". I dont have recovery anymore, only the Download Mode.
Please, give me a link with the steps or show me how to install new ROM property, because this is the 3rd day i'm trying to start the phone with new ROM. Kies don't help, because "USB Debugging" is not activated on my phone (i can't activate it, because of the problem).
Thanks.
cm9 with odin
for cm9 with odin check this link: http://forum.xda-developers.com/showthread.php?t=1419102
Flashing shouldn't take more than a few minutes. CM9 was stable for me - with cm10 I still have a few problems.
start from stock rom
I think you should flash stock rom first.
flash GB firmware 2.3.6 (recommend JVU).
flash CF-root for jvu.
you can find stock firmware easily here as well.as instructions.
make sure play around with your phone for a while after done. then go ahead to any custom rom.

sgh-t599 recovery / restore

HI XDA
I got this sgh-t599 tmobile phone yesterday. (didn't realize it was rooted) messed around/did factory reset without backup.
now im stuck in CWM recovery 6.0.3.6, Ive spent several hours readind and trying to fix this with no luck.
I tried using adb, kies etc. none can detect device. device drivers are installed(tried 'have disk'), it shows Samsung under device manager.
I can device list in adb and shows the numbers and "recovery" but when i try to use commands it says "waiting for device" or something.
from what i read, i need unsecure boot to restore firmware. where can i get this and how do i do it pls.
i have no mount usb option in cwm, when i try to recover/update from cwm it says aborted. in adb im able to reboot the phone with the commands but always reboots to cwm recovery or waiting for device. any help pls. i may have access to another rooted t599 if i am able to backup and recover it to this phone?:crying:
do you think local phone repair shop can fix this back to stock or rooted and for how much?
momsbest said:
HI XDA
I got this sgh-t599 tmobile phone yesterday. (didn't realize it was rooted) messed around/did factory reset without backup.
now im stuck in CWM recovery 6.0.3.6, Ive spent several hours readind and trying to fix this with no luck.
I tried using adb, kies etc. none can detect device. device drivers are installed(tried 'have disk'), it shows Samsung under device manager.
I can device list in adb and shows the numbers and "recovery" but when i try to use commands it says "waiting for device" or something.
from what i read, i need unsecure boot to restore firmware. where can i get this and how do i do it pls.
i have no mount usb option in cwm, when i try to recover/update from cwm it says aborted. in adb im able to reboot the phone with the commands but always reboots to cwm recovery or waiting for device. any help pls. i may have access to another rooted t599 if i am able to backup and recover it to this phone?:crying:
do you think local phone repair shop can fix this back to stock or rooted and for how much?
Click to expand...
Click to collapse
You must have format system or something. A factory reset wipes cache and data, nothing else. There should be a homebrew odin-file somewhere in these t599 threads.
tys0n said:
You must have format system or something. A factory reset wipes cache and data, nothing else. There should be a homebrew odin-file somewhere in these t599 threads.
Click to expand...
Click to collapse
phone was rooted and had superuser etc on it. I didn't know about rooting, I did factory reset from the main menu which im pretty sure is what caused this. before that I was able to look through its apps where I saw the superuser,terninal and others, once factory reset it rebooted to cwm recovery and stuck there. there was no backup or side sdcard. only realized it was rooted after saw the cwm and stuck
odin doesnt detect phone either, downloaded/installed universal drivers still no go.
main issue is not being to able enable usb debug/download while still in cwm
repair shop says $30, about to run there
i caused my friends sgh-t599 to do that
So... This might be late.... But I'm going to postthis for others .... So I was looking for ever for a way to unbrick his phone... Then hope Finley came .. After I read hard enough .. And came across a post for a stock pre-rooted tar file to be flashed with Odin...
^Odin V3.09
http://odindownload.com/
^PreRooted Stock ROM for SGH-T599
https://docs.google.com/uc?id=0B8oW93h4qD3-X3UxdFl5VlhzZVU&export=downloads
° so to unbrick you're SGH-T599 after downloading the two files above
1§t: put sgh-t599 in download mode(vol.down+home+power).... Plug in and press vol. Up
2ed: Open odin 3.09.. Wait for added to show up (mite have to unplug then re plug the phone)..
Click on AP and find 0B8oW93h4qD3-X3UxdFl5VlhzZVU.tar
........ It should take awhile ......
Then after you're phone boots up... An after you set everything up
.... GET two apps from the play store
° install one of the superuser apps
° then get a root checker as app
^EXTRAS(maybe needed)
°one of BusyBox apps from play store
° SU checker app from the play store
HOPE EVERYTHING WORKS WELL FOR ANYONE WHO NEEDS THIS TO ATTEMPT TO UNBRICK YOU'RE DEVICE
....
PS IM NOT RESPONSIBLE IF ANYTHING ELSE GOES WRONG
....
LAST BUT NOT LEAST I DID NOT MAKE THIS ROM... I JUST FOUND IT AND CAME UP WITH A EASY TO DO TUTORIAL
tnx so much
Thank you very much.I looked for a stock rom/recovery image.etc.took me a while till I came across with this .it was a metro pcs/exhibit sgh_t599.I bricked it playing with it.u no.uninstalling unnecessary apps.lol.so my wife got mad.cause is not the first one.
Also had an alcatel,galaxy s3,etc.bricked of course.but thanks for the files.God bless
help
Hello guys , i got a very serious problem here . i'm using samsung galaxy exhibit t599 .
The problem is , why is the signal of my phone always EDGE .
if i setting to Wcdma only (3G) , the signal is gone ,it just like the provider isn't supporting 3G , but it is support . I already trying another provider , the same thing always happen.
pleasee help me , do u guys have any suggestion about what i am suppose to do ?
thank you.
shorty9210 said:
So... This might be late.... But I'm going to postthis for others .... So I was looking for ever for a way to unbrick his phone... Then hope Finley came .. After I read hard enough .. And came across a post for a stock pre-rooted tar file to be flashed with Odin...
^Odin V3.09
http://odindownload.com/
^PreRooted Stock ROM for SGH-T599
https://docs.google.com/uc?id=0B8oW93h4qD3-X3UxdFl5VlhzZVU&export=downloads
° so to unbrick you're SGH-T599 after downloading the two files above
1§t: put sgh-t599 in download mode(vol.down+home+power).... Plug in and press vol. Up
2ed: Open odin 3.09.. Wait for added to show up (mite have to unplug then re plug the phone)..
Click on AP and find 0B8oW93h4qD3-X3UxdFl5VlhzZVU.tar
........ It should take awhile ......
Then after you're phone boots up... An after you set everything up
.... GET two apps from the play store
° install one of the superuser apps
° then get a root checker as app
^EXTRAS(maybe needed)
°one of BusyBox apps from play store
° SU checker app from the play store
HOPE EVERYTHING WORKS WELL FOR ANYONE WHO NEEDS THIS TO ATTEMPT TO UNBRICK YOU'RE DEVICE
....
PS IM NOT RESPONSIBLE IF ANYTHING ELSE GOES WRONG
....
LAST BUT NOT LEAST I DID NOT MAKE THIS ROM... I JUST FOUND IT AND CAME UP WITH A EASY TO DO TUTORIAL
Click to expand...
Click to collapse
Can i use this on SGH-T599V?
Jay_SEAN said:
Can i use this on SGH-T599V?
Click to expand...
Click to collapse
Awe not going to lie but it's been a long time sense then lol but I have had success flashing ROMs from different veriants of models but to be safe I would download this specific one( http://d-h.st/Z5c )just to be safe an then fallow my steps.
Good luck hope it helps

[Q] [Q&A][G-I9000]Phone wont get past boot logo/wont go into recovery

Hi there! Now, firstly, ive always used Windows Phones but, would like to join Android and discover what it is really like to use... It really does look like fun to use
Anyway, last night i got my mums old Samsung Galaxy S1(G-I9000) and tried to root it and put CyanogenMod on it so i could get arid of the broken TouchWiz(I don't know what the new versions of it are like, but this one was broken and horrible to use) and get updated to Android 4+. Now, the root was successful and i am very happy with myself for doing that.... But here is where it all fell apart....
So, i jumped on their guide on their cyanogenmod wiki and it turns out that doing that first step(The "Installing a custom recovery on Galaxy S") was not needed because i already had ClockWork on my phone and that doing it would apparently break my phone.... I did not realise that till afterwards.
When i tried to reboot into recovery mode to install CM it got stuck on the boot screen. I think to myself maybe its stuffed and ill just reboot it again and see if it work... Nope. Now i try to reboot normally and leave it alone.... Nope. Turns out, all i can do is get into download mode. Now, from what ive found online, using Odin to reflash my phone with the stock ROM is how to fix my phone, problem is, Odin is not finding the phone and Hard Resetting the phone by holding down Lower Volume button and power is not working.... How can i fix this?
I think you can still recover it. However, the reason Odin might not recognize it it's probably because you haven't installed the Samsung USB drivers
If you install them and try to go into Download mode again you might be able to flash the stock ROM back onto your Samsung phone

i9001 bricked?

Hello together,
i have a big problem with my phone
what i did:
i found my "old" i9001 and wanted to date it up. at this point i have installed successfully [ROM][RR-msm7x30][ariesve][OFFICIAL][5.1.1_r24][24/10/15]Resurrection Remix 5.5.8 EOL
but i wasn't satisfied with this version, so i wanted to return to stock rom.
at this point i made a mistake, because the recovery gives the following back: e: can't mount sdcard.
The phone cant reboot.
I found some tutorials that suggest to use odin and flash easily the stock rom over it.
But here comes my problem - my phone was not pluged in to the pc -> no samsung drivers are installed :/
So i cant easily plug in the phone to pc and flash via odin, because the pc does not recognize it :/
i tried some samsung drivers, but nothing helped.
At the end i can start the Recovery (CWM), but i have no backups.
have someone a solution for me, i dont want to bury my phone
Thank you a lot!
regards,
c0xi

Categories

Resources