I have a locked bootloader, and I don't want to unlock it to keep the warranty.
I tried installing Blackrose (to install JB) without success.
I have a SLCD Nexus One with HBOOT 0.35.0017
The automated installer hangs at "*Waiting for device...".
I have installed the drivers and I can see my N1 doing "fastboot.exe devices".
I tried this guide http://forum.xda-developers.com/wiki/HTC_Nexus_One/TexasICS/Installing_Guide
fastboot boot go35.lol
downloading 'boot.img'...
OKAY [ 0.031s]
booting...
FAILED (remote: not allowed)
finished. total time: 0.094s
What am I doing wrong? Do I have to unlock the bootloader?
In the README it says to flash go35.lol to the recovery partition using the flash_image method, but I can't find anywhere anything about it.
I currently have 4EXT recovery.
no i dont have to unlock the bootloader. locked bootloader is fine. connect ur phone when it is booted normally(not in fastboot mode). now run blackrose.exe
installation should begin automatically. also remember to turn of ur antivirus during this process
Sent from my Nexus One using Tapatalk
n1newbie said:
no i dont have to unlock the bootloader. locked bootloader is fine. connect ur phone when it is booted normally(not in fastboot mode). now run blackrose.exe
installation should begin automatically. also remember to turn of ur antivirus during this process
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
I don't think you can install blackrose without unlock the bootloader first.
taodan said:
I don't think you can install blackrose without unlock the bootloader first.
Click to expand...
Click to collapse
no buddy. you can install blackrose wid locked bootloader aswell.
for reference see this post by the dev of blackrose. point 7
http://forum.xda-developers.com/showpost.php?p=20548080&postcount=607
Sent from my Nexus One using Tapatalk
Hi i was rooted and flashed some custom fw before... than i was back stock fw and relocked with flashtool blu buttons. i want bbotloader locking and rooting again but it fails with this alert
< waiting for device >
...
FAILED (remote: Command did not succeed)
finished. total time: 0.035s
i tried another stock firmwares but not works..
please help
eguk said:
Hi i was rooted and flashed some custom fw before... than i was back stock fw and relocked with flashtool blu buttons. i want bbotloader locking and rooting again but it fails with this alert
< waiting for device >
...
FAILED (remote: Command did not succeed)
finished. total time: 0.035s
i tried another stock firmwares but not works..
please help
Click to expand...
Click to collapse
same happend to me a few weeks back:
http://forum.xda-developers.com/showthread.php?t=2364334
kistigun said:
same happend to me a few weeks back:
http://forum.xda-developers.com/showthread.php?t=2364334
Click to expand...
Click to collapse
i seen now but that was not have any issiues :/ what can i do
help please:/
Hi everyone,
i've the phone can only go into eRecovey and fastboot. I think that the corrupted file is oeminfo.bin, bacause i was replaced with file explorer to have the exact version of the firmware.
Recovery i've tried to download by wifi the firmware, but when install return with authentication info failed error red exclamation dot. I've tried with full wipe but after reboot it return into eRecovery.
Into fastboot return with FAILED (remote: Command not allowed).
Bootloader after update was began locked and i cannot unlock, so TWRP is cutted out.
There's some method to flash the .img system etc like odin for samsung?
i've also the old version of oeminfo.bin on my PC, if i have a method to flash it trough ADB, but i don't know how to unbrick.
Thanks
frencisis said:
Hi everyone,
i've the phone can only go into eRecovey and fastboot. I think that the corrupted file is oeminfo.bin, bacause i was replaced with file explorer to have the exact version of the firmware.
Recovery i've tried to download by wifi the firmware, but when install return with authentication info failed error red exclamation dot. I've tried with full wipe but after reboot it return into eRecovery.
Into fastboot return with FAILED (remote: Command not allowed).
Bootloader after update was began locked and i cannot unlock, so TWRP is cutted out.
There's some method to flash the .img system etc like odin for samsung?
i've also the old version of oeminfo.bin on my PC, if i have a method to flash it trough ADB, but i don't know how to unbrick.
Thanks
Click to expand...
Click to collapse
Run these commands in fastboot and report back
fastboot oem get-product-model
fastboot getvar vendorcountry
danifilth4king said:
Run these commands in fastboot and report back
fastboot oem get-product-model
fastboot getvar vendorcountry
Click to expand...
Click to collapse
Thanks, the resuls are:
C:\adb>fastboot devices
LCL0218428003429 fastboot
C:\adb>fastboot oem get-product-model
...
FAILED (remote: FAIL)
finished. total time: 0.006s
C:\adb>fastboot getvar vendorcountry
getvar:vendorcountry FAILED (remote: cannot get vendorcountry in oeminfo)
finished. total time: 0.011s
C:\adb>
frencisis said:
Thanks, the resuls are:
C:\adb>fastboot devices
LCL0218428003429 fastboot
C:\adb>fastboot oem get-product-model
...
FAILED (remote: FAIL)
finished. total time: 0.006s
C:\adb>fastboot getvar vendorcountry
getvar:vendorcountry FAILED (remote: cannot get vendorcountry in oeminfo)
finished. total time: 0.011s
C:\adb>
Click to expand...
Click to collapse
As your normal eRecovery method isn't working you could try using the FunkyHuawei eRecovery method to flash firmware but you'd have to pay for credits and there's no guarantee it would work. Problem is knowing which firmware to choose as we don't know if your rebrand was successful.
You could try a firmware that matches what your model and region of your phone was originally and if that doesn't work try the firmware meant for the model/region you were trying to rebrand to?
Other than that I'm out of ideas if you can't unlock your bootloader :/
danifilth4king said:
As your normal eRecovery method isn't working you could try using the FunkyHuawei eRecovery method to flash firmware but you'd have to pay for credits and there's no guarantee it would work. Problem is knowing which firmware to choose as we don't know if your rebrand was successful.
You could try a firmware that matches what your model and region of your phone was originally and if that doesn't work try the firmware meant for the model/region you were trying to rebrand to?
Other than that I'm out of ideas if you can't unlock your bootloader :/
Click to expand...
Click to collapse
I've tried to contact Funky Huawei, but they answered to me that: "Unfortunately in your situation recovery might not be possible".
So the last one is to try with warranty into Huawei service.
I hope they could repair it with less money as possible. Maybe they will replace the main board or just re flash he firmware with special method?:crying:
not possible to flash firmware in downloade mode?
mrt box
elvis87 said:
mrt box
Click to expand...
Click to collapse
Have you seriously just answered a 2 years old thread?..
Dude, I have the same problem with a P20 Pro since january!
Usb-c pendrive with proper firmware did the trick for me last time. Nothing else worked. Erecovery is useless crap.
deucecorp said:
Usb-c pendrive with proper firmware did the trick for me last time. Nothing else worked. Erecovery is useless crap.
Click to expand...
Click to collapse
Can I pm you for details?
Hello guys i am currently on 10.0.2.0.PDIMIFJ. I enabled camera 2 api and was unable to update my phone as i messed up with build.prop file.So now when i wanted to flash my device via mi flash tool this shows up (error:."Flash devcfg_a error")
I even tried this code (fastboot flashing unlock_critical) before flashing via mi flash tool and this shows up (FAILED (remote: Flashing Unlock is not allowed
)) . And i even tried to boot into edl mode but eventually this shows up (FAILED (remote: Device is already locked!)
finished. total time: 0.005s)
Please guys help me to flash my device to latest update.I tried every single stock firmwares.
Thanks In Advance
And sorry for my bad english
I would like to know if I do something wrong installing the rom, I get an error
FAILED (remote: flash write prim vrl failure)
ALE-L21 stock rom: http://update.dbankcdn.com/TDS/data/files/p3/s15/G2068/g1647/v167419/f1/full/update.zip