Hello everyone. The battery of my dock recently stopped charging. Filed a RMA request with Asus but they rejected it because it was out of warrenty. Does anyone know if there is a way to replace the battery of the dock and where i could get a new battery?
Was your RMA rejected since you unlocked your device? They tried the same with me, but that is nonsense at least if you're in the EU. Citing the respectie EU directive was enough for them to change their minds
I'm coming up blank also. Can you remove the one you have, maybe get a number off it?
The rma was rejected because i have the tab for more than a year. Yesterday I tried to see if i could open the dock but didn't go all the way. To much force needed.
Hello,
the dock is easy to open.
Remove 4 screws Torx (T5) and take off the pads and remove 4 screws with Phillips #00 Screwdrive.
Now it's possible to open dock with a spudger or Plastic Opening Tools.
---------- Post added at 08:59 PM ---------- Previous post was at 08:55 PM ----------
I find This : https://www.youtube.com/watch?v=ZwAypkC26Cc
Nixus_Maximus said:
Was your RMA rejected since you unlocked your device? They tried the same with me, but that is nonsense at least if you're in the EU. Citing the respectie EU directive was enough for them to change their minds
Click to expand...
Click to collapse
What directive did you quote?
It is EU-Directive 1999/44/CE
Gesendet von meinem K00C mit Tapatalk
Related
Hi
Has anyone had their Nexus 7 screen replaced by ASUS? How much did they charge?
Cheers
Contact customer care they will make u knw replacement cost of frisplay
Sent from my Micromax A50
---------- Post added at 06:27 PM ---------- Previous post was at 06:27 PM ----------
Sry display
Sent from my Micromax A50
I did but she said she can't tell me.
All she said was £45 to inspect plus the cost of the screen
anyone able to help?
pda said:
I did but she said she can't tell me.
All she said was £45 to inspect plus the cost of the screen
Click to expand...
Click to collapse
If only inspecting costs that much, you should buy a new one....
Sent from my Nexus 7
yulet said:
If only inspecting costs that much, you should buy a new one....
Click to expand...
Click to collapse
Indeed, chances are it will be close to 50% of the price of a new one with the chance of them messing it up instead of fixing it. And you will be without a tablet during the repairs (which can be 5 weeks + from what I've read others say). Probably best to cut your losses and get a new one. But since it's apparently a hard to give answer, I'm beginning to become curious as well
I've noticed recently an issue with my Xperia Z USB port cover cap. It is showing signs of being damaged.
At first, it feels lose and dosn't have that strong closing any more. And recently it started not to close well and shows a bump, not flat with the surface. I always knew this would happen because of all the plug in and out of the charger/microUSB cable.
I wonder if any of you guys has experienced this with the USB or other port's caps. The phone is on warranty so I'm thinking, since this is a waterproof phone, that it should be fixed by Sony. Now I wonder if they will consider this a defect or bad use of the device and charge me for the repair.
What's your experience on this?
I can only confirm that I have the exact same issue.
Sent from my C6603 using xda app-developers app
Mine went a week or so ago, got phone A month after launch.
Sent from my C6603 using XDA Premium 4 mobile app
i have the same issue the robber in it was plugged from it's place will go visit sony service center soon maybe i can a new usb port cover
Yep the same issue.
I fixed it myself
Gesendet von meinem C6603 mit Tapatalk
---------- Post added at 10:16 PM ---------- Previous post was at 10:13 PM ----------
smash_07 said:
I've noticed recently an issue with my Xperia Z USB port cover cap. It is showing signs of being damaged.
At first, it feels lose and dosn't have that strong closing any more. And recently it started not to close well and shows a bump, not flat with the surface. I always knew this would happen because of all the plug in and out of the charger/microUSB cable.
I wonder if any of you guys has experienced this with the USB or other port's caps. The phone is on warranty so I'm thinking, since this is a waterproof phone, that it should be fixed by Sony. Now I wonder if they will consider this a defect or bad use of the device and charge me for the repair.
What's your experience on this?
Click to expand...
Click to collapse
It's easy to fix if you do it right.
I can describe how i did it if you want.
All you need is sensite feeling and a new usb cap from a website, i got mine from amazon.
Gesendet von meinem C6603 mit Tapatalk
smash_07 said:
I've noticed recently an issue with my Xperia Z USB port cover cap. It is showing signs of being damaged.
At first, it feels lose and dosn't have that strong closing any more. And recently it started not to close well and shows a bump, not flat with the surface. I always knew this would happen because of all the plug in and out of the charger/microUSB cable.
I wonder if any of you guys has experienced this with the USB or other port's caps. The phone is on warranty so I'm thinking, since this is a waterproof phone, that it should be fixed by Sony. Now I wonder if they will consider this a defect or bad use of the device and charge me for the repair.
What's your experience on this?
Click to expand...
Click to collapse
Thats the reason i bought a dock station 3 months after i got my Z. Its a good solution for home
AlexR29 said:
Thats the reason i bought a dock station 3 months after i got my Z. Its a good solution for home
Click to expand...
Click to collapse
I got a dock too but had to change cups before that :thumbdown:
Gesendet von meinem C6603 mit Tapatalk
Tommy-Geenexus said:
Yep the same issue.
I fixed it myself
Gesendet von meinem C6603 mit Tapatalk
---------- Post added at 10:16 PM ---------- Previous post was at 10:13 PM ----------
It's easy to fix if you do it right.
I can describe how i did it if you want.
All you need is sensite feeling and a new usb cap from a website, i got mine from amazon.
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
So how did you fix it? I can find a new cap easily. Even though I have warranty to fix this by Sony I would like to know your procedure.
smash_07 said:
So how did you fix it? I can find a new cap easily. Even though I have warranty to fix this by Sony I would like to know your procedure.
Click to expand...
Click to collapse
Ok the only hard thing is to get the cap out of the phone.
You need to go in the small hole over the gap with something thin and stable, then you need to push the cap down and while doing this you need to carefully pull it out. There is a barb at the end which shouldn't get stuck in the phone, so don't pull too much.
It can take a bit up to 15 min but it's worth it. There's no need to sent it in repair becoz the phone's away 2 weeks then.
The input of the new cap is easy and goes itself.
Gesendet von meinem C6603 mit Tapatalk
AlexR29 said:
Thats the reason i bought a dock station 3 months after i got my Z. Its a good solution for home
Click to expand...
Click to collapse
I ordered my XZ the launch week along with the dock... In fact I received the dock before the phone. I also use Airdroid to transfer content to my phone for convenience reasons mainly. So, my usb flap has been opened like 20 times maximum to do some flashtool sessions or emergency charges out of home, and it still closes and feels like brand new.
Definitely after reading threads like this I feel buying the dock was a very, very good idea.
No problem here I have been using both dock and usb since i bought the phone 8 month ago and the cap is still flat.
can you please a youtube video of this procedure??
Shaggerholics said:
can you please a youtube video of this procedure??
Click to expand...
Click to collapse
You need no vid. Just try it it isn't hard.
Sent from my white Xperia™Z
Tommy-Geenexus said:
Ok the only hard thing is to get the cap out of the phone.
You need to go in the small hole over the gap with something thin and stable, then you need to push the cap down and while doing this you need to carefully pull it out. There is a barb at the end which shouldn't get stuck in the phone, so don't pull too much.
It can take a bit up to 15 min but it's worth it. There's no need to sent it in repair becoz the phone's away 2 weeks then.
The input of the new cap is easy and goes itself.
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
So I have to make a hook with cooper or wire to pull old flap out? And then just insert new one in?
sipe1 said:
So I have to make a hook with cooper or wire to pull old flap out? And then just insert new one in?
Click to expand...
Click to collapse
Normally you don't need anything, you only need to pull carefully.
The thing is you need to know how the flap is build, the barb shows up.
You may need to find out yourself how to do it best.
Sent from my white Xperia™Z
I've got a set on order and will let everyone know how I did it. I was thinking that a thin sewing pin down the hole on the side the barb was on might do it, if I feel too nervous just pulling, thinking it might snap off.
Please provide step by step pictures! ?
?
Mobe1969 said:
I've got a set on order and will let everyone know how I did it. I was thinking that a thin sewing pin down the hole on the side the barb was on might do it, if I feel too nervous just pulling, thinking it might snap off.
Click to expand...
Click to collapse
Thank you! Post pictures of new flap to see how to get it out. And if you can take picture of every step.
I did try but im scared to go the distance please i have got my replacement flaps........so please can you post a video or the tool you used ??? if video please help with pictures....
Ifixit might have a teardown video. Go check.
Sent from my C6603 using xda app-developers app
Guys,
I just dropped my Note 3. It has a caselogy case on it but the screen went dark after got dropped. The screen has not cracked or anything. I can hear the notifications. I can even pick up calls by guessing the unlock swipe on the screen. The screen stays black or I see lines some time.
Can you gurus help me figure out what could be the problem ?
Thanks in advance.
The problem is you dropped your phone and the case didn't do squat!
You basically have 2 choices.
1. Send in for warranty exchange. Since the screen isn't cracked the store should be able to swap phones. Or you can send in for warranty to Samsung.
2. Void your warranty and open her up. It's possible something became jarred lose. Do some investigation.
---------- Post added at 11:49 AM ---------- Previous post was at 11:45 AM ----------
Just check out this video and see all the connectors that could of popped lose!
440bro said:
The problem is you dropped your phone and the case didn't do squat!
You basically have 2 choices.
1. Send in for warranty exchange. Since the screen isn't cracked the store should be able to swap phones. Or you can send in for warranty to Samsung.
2. Void your warranty and open her up. It's possible something became jarred lose. Do some investigation.
---------- Post added at 11:49 AM ---------- Previous post was at 11:45 AM ----------
Just check out this video and see all the connectors that could of popped lose!
Click to expand...
Click to collapse
Thanks for the help. I could not see the link to the video. Can you post the link again please ?
Whoops!
https://www.youtube.com/watch?v=XJlsLUNsvRo&feature=youtube_gdata_player
kvssvarma said:
Guys,
I just dropped my Note 3. It has a caselogy case on it but the screen went dark after got dropped. The screen has not cracked or anything. I can hear the notifications. I can even pick up calls by guessing the unlock swipe on the screen. The screen stays black or I see lines some time.
Can you gurus help me figure out what could be the problem ?
Thanks in advance.
Click to expand...
Click to collapse
I think, you should go for exchange as per the basis of warranty.
**** ****.. My Axon dropped on the floor this morning resulting in a cracked screen.
I've bought this phone from Amazon and got it shipped to Belgium. So, getting it back to ZTE will be a hassle and cost me a lot of money. Did some research myself and found a full screen for the ZTE axon elite (I have a pro, is there any difference?) on the site parts4repair.. Is this trustable and if it is, isnt it too difficult to change the screen yourself?
Please share your advice with me,
T
Nobody who can help me out?
Do you live in the US?
Sent from my A1P using Tapatalk
---------- Post added at 04:07 PM ---------- Previous post was at 04:06 PM ----------
Lamsednav said:
**** ****.. My Axon dropped on the floor this morning resulting in a cracked screen.
I've bought this phone from Amazon and got it shipped to Belgium. So, getting it back to ZTE will be a hassle and cost me a lot of money. Did some research myself and found a full screen for the ZTE axon elite (I have a pro, is there any difference?) on the site parts4repair.. Is this trustable and if it is, isnt it too difficult to change the screen yourself?
Please share your advice with me,
T
Click to expand...
Click to collapse
coldheat06 said:
I would just contact ZTE and have them repair it...... There are no repair videos online
Sent from my A1P using Tapatalk
Click to expand...
Click to collapse
Sent from my A1P using Tapatalk
coldheat06 said:
Do you live in the US?
Sent from my A1P using Tapatalk
---------- Post added at 04:07 PM ---------- Previous post was at 04:06 PM ----------
Sent from my A1P using Tapatalk
Click to expand...
Click to collapse
No, in Europe. (Belgium)
I'm thinking about ordering a screen from aliexpress.com and try to replace it myself.
I've seen a guide about the ZTE Axon in here: https://www.ifixit.com/Teardown/ZTE+Axon+Teardown/53392
I hope it isn't too hard.
Lamsednav said:
I'm thinking about ordering a screen from aliexpress.com and try to replace it myself.
I've seen a guide about the ZTE Axon in here: https://www.ifixit.com/Teardown/ZTE+Axon+Teardown/53392
I hope it isn't too hard.
Click to expand...
Click to collapse
Good find!!
Please let us know how it goes!!!
Sent from my A1P using Tapatalk
Has there been any progress on the repair? I also dropped my ZTE Axon, and I have been searching for a repair guide without much luck.
Lamsednav said:
No, in Europe. (Belgium)
Click to expand...
Click to collapse
I'm living in Belgium too , have you fix your screen because mine is broken too, and i'm looking for someone to fix it in Belgium
Any update on a guide to replacing the screen. I have a cracked Axon Elite and want to order a new screen, but no guide seems to exist on how to swap the screen.
Hello!
Someone knows where to buy a spare battery? I don't found any place for buy it.
Thanks,
Enviado desde mi SM-G930F mediante Tapatalk
jobrima said:
Hello!
Someone knows where to buy a spare battery? I don't found any place for buy it.
Thanks,
Enviado desde mi SM-G930F mediante Tapatalk
Click to expand...
Click to collapse
might be able to contact LG...
I have seen one on ebay.
But I have not been able to find how to change it...
binome said:
I have seen one on ebay.
But I have not been able to find how to change it...
Click to expand...
Click to collapse
Please, can you send the ebay link?
Enviado desde mi SM-G930F mediante Tapatalk
Re: battery for LG Sport
jobrima said:
Please, can you send the ebay link?
Click to expand...
Click to collapse
As far as I understand(found information on reddit) - we need LG BL-S7 battery.
But I wonder why it is so cheap on Ebay, comparing to s6 and s8...
I have bought a s6 battery.
It is half a mm thicker than the s7.
It have 570mah
So i get 24 hours secure with lte on.
If you would do the same - think about the connector.
I have change the complet balancer between the accus.
Lg
Eike
new battery into LG Watch
insedere said:
I have bought a s6 battery.
It is half a mm thicker than the s7.
It have 570mah
So i get 24 hours secure with lte on.
If you would do the same - think about the connector.
I have change the complet balancer between the accus.
Lg
Eike
Click to expand...
Click to collapse
So in order to replace BL-s7(430mah) with s6(570mah) you've upgraded s6 battery with s7's connector? And thickness is not a problem? Have you made any photos of replacement?
You've purchased s6 from China(Ebay) for $26 instead of s7 for $16, right?
Sorry - no photos.
Bought on ebay - think its china
insedere said:
I have bought a s6 battery.
It is half a mm thicker than the s7.
It have 570mah
So i get 24 hours secure with lte on.
If you would do the same - think about the connector.
I have change the complet balancer between the accus.
Lg
Eike
Click to expand...
Click to collapse
Did you change the little pc board or only the ribbon cable?
---------- Post added at 06:32 AM ---------- Previous post was at 06:23 AM ----------
kapetc said:
So in order to replace BL-s7(430mah) with s6(570mah) you've upgraded s6 battery with s7's connector? And thickness is not a problem? Have you made any photos of replacement?
You've purchased s6 from China(Ebay) for $26 instead of s7 for $16, right?
Click to expand...
Click to collapse
I got a s6 battery. Trying to figure out if i must only change the ribbon cable with connector or the little pc board on the battery as well. Will make a post with pictures once i get that figured out