- Problem: phone turns off when you try to send the call,after the factory reset and disconnected when the call switches to the ongoing spontaneous enable and disable. When you connect the charger, these problems disappear,the phone works fine,one problem remains-I hear very quiet companion.If you try to repair in PC Companion error message appears : problem:new software for the device no. Information: not available for your device in the program Sony update. Troubleshooting: please try again later. Repeated-nothing happens..
Related
I guys;
Rogers Network Canada
Recently my cell phone started to act weird. First dialling is taking about 30 to 45 seconds before connecting with the other line now all my calls are been redirected to my voice mail. No ring no vibe straight to the mailbox!
I was trying to see if it’s something I did by accident in the phone by going to phone settings , services
Call barring (can’t get access to it)
message- cannot read settings from network. Try viewing settings letter or disconnect data connection and try again.
before I was able to access it not sure if it may be a hardware problem now
Caller ID (can’t get access) same message
Call forwarding (can’t get access) same message
I can only access Call waiting and Voice mail and Tex Messages.
I soft reset the phone no luck then hard reset no luck either flashed new room and nothing!! I don’t know what else to do. Call Customer support and he asked me to try my sim card in another phone and it worked just fine. I switched my wife’s sim card in my phone and same problem her calls go straight to the mail box!
Any help will be very appreciate
any tool or software to fix the problem?
I'm using imate pda2k device.
wm pro 6.5 is the operating system.
The device was working smoothly until a week ago.
the question: the phone function does not work. sent me sms comes, I can send sms. But I can not receive calls and make calls on. To even make a call, even numbers and contacts will not open.
Bluetooth had no problem connecting to GSM networks, but the exclamation was inserted. From the LED is blinking but the screen seemed to connect to the network that still has delusions of trying to connect. I like my phone is ringing like a phone call to another party, but on the phone to the sound goes nothing, I can even connect to the internet , but the normal phone functions does not work.
please help me
Did u check your battery?
Wrong forum.. this is for the XDA2i....
Weird fault though!
So I purchased the Sony Ericsson Aspen. Unfortunately, I got the M1a and not the M1i. SE released a software update (R1BA013, R4A) for the M1i that fixed most of the known bugs. However, its sibling, the M1a, remains stuck at R1AB038, R7A (I think R7A is Americanese for R3A; both have odd numbers! ) and suffers from several annoying bugs including but not limited to:
- Bluetooth issues: disconnections, static noise, stuck at connected to headset mode even if headset was turned off.
- Phone Calls: Unable to receive calls. The phone will be working just fine for days. Then suddenly, you receive one call, the phone and keypad will light up, but the home screen will not change to show the Caller ID/Actions screen. You will have to first reject the call, then go to the call register to see who called you and call them back. You can still make calls, but you can never receive any on any of the installed panels once the problem appears. Only a Soft Reset can fix it until it happens again day(s) later.
My question is this:
I have Omnius installed on my PC. Is there any way to get the Generic Worldwide English firmware (R1BA013) and the UK customization (R4) files either through SEUS or the Internet to flash my M1a? Is it even possible? Do I need to change the phone's CDA for it work? Is there a way to trick SEUS into updating my M1a as if it's an M1i? It looks like SE will give up on the M1a and will not release any future updates for it! It's has been three months since they released the update for the M1i now...
One more thing: checking SEUS with my phone connected says that I have the most recent software; HOWEVER, it doesn't even offer me an option to reflash it again! I can only exit the application! Why is SE treating all the (a) versions of its phones differently compared to the (i) ones?
Have u succeeded?
have u succeeded? i desperately wanted to change the region also! thanks
i have tfm and recently the phone wont dial.
it shows the number but there is no ring.
i tried to isolated the problem and saw that after i disconnect the local data it fix.
try to reinstall tfn and reinstall apn but nothing help.
and suggestion?
thanks
Hi there.
I have Note 9 without any brand. Updated to newest firmware that existed and about two updates ago there was problem - i cant make any calls. Restarts one helps, and other time don`t help at all. And now - it was no use to restart phone because of this problem. I felt that it might be this problem and i turned off this option and tried to make call - and nothing. Only when i restarted phone again - i can make phone calls normally like before. This problem exists not everytime, it looks like when i make call to my second phone it is only "connecting..." at my note9, and other phone is ringing. And there is two kind of behavior, first - in note i cant hear anything, just this "connecting..." message, and other phone after few seconds hangs up and ask about reconnect. And second - after few seconds after receiving call it finally works but it have take some time between receiving call at second phone and hearing anything. Its lottery.
Now i have this option disabled, phone is restarted and now i can make calls. I contacted Samsung via chat (samsung members app) and via Twitter and they said to me to go to their service to diagnose or sth, but i know what i will hear at service: "please reset your phone to factory settings and if then this issue will be present we will take your phone and try to repair it" but i don`t want to do this because of all this configuration and hours of clicking... I dont like to do this when i dont have to.
So my question - do you have similar or the same problem? Is WiFi calling have anything to do with sim provider?
DeVilio said:
Hi there.
I have Note 9 without any brand. Updated to newest firmware that existed and about two updates ago there was problem - i cant make any calls. Restarts one helps, and other time don`t help at all. And now - it was no use to restart phone because of this problem. I felt that it might be this problem and i turned off this option and tried to make call - and nothing. Only when i restarted phone again - i can make phone calls normally like before. This problem exists not everytime, it looks like when i make call to my second phone it is only "connecting..." at my note9, and other phone is ringing. And there is two kind of behavior, first - in note i cant hear anything, just this "connecting..." message, and other phone after few seconds hangs up and ask about reconnect. And second - after few seconds after receiving call it finally works but it have take some time between receiving call at second phone and hearing anything. Its lottery.
Now i have this option disabled, phone is restarted and now i can make calls. I contacted Samsung via chat (samsung members app) and via Twitter and they said to me to go to their service to diagnose or sth, but i know what i will hear at service: "please reset your phone to factory settings and if then this issue will be present we will take your phone and try to repair it" but i don`t want to do this because of all this configuration and hours of clicking... I dont like to do this when i dont have to.
So my question - do you have similar or the same problem? Is WiFi calling have anything to do with sim provider?
Click to expand...
Click to collapse
Well need a few things to be able to help.
Carrier?
Model? I'm guessing N960I1?
What is the firmware version you're on?
Jammol said:
Well need a few things to be able to help.
Carrier?
Model? I'm guessing N960I1?
What is the firmware version you're on?
Click to expand...
Click to collapse
Carrier - Poland, Play but not branded phone , model - SM-N960F, FW version N960FXXS2CSD2/N960FOXM2CSA7/N960FXXS2CSD1
DeVilio said:
Carrier - Poland, Play but not branded phone , model - SM-N960F, FW version N960FXXS2CSD2/N960FOXM2CSA7/N960FXXS2CSD1
Click to expand...
Click to collapse
And I'm assuming the carrier Support Wi-Fi calling right? It may be a provisioning issue. You should try contacting your carrier and verify Wi-Fi calling is a feature and that they support it on your device. They should also be able to help you activate it if they support it.
I wrote that it was working normally before, and now it stops. I`ve had this thing working.