Related
Hi, i've bough a p3600 on ebay.
The seller tell me the phone is out because he flash a bad radio version on the phone.
I try to upgrade some file. ( Rom OS, Radio, SPL,etc ...)
I try the splexploit...
BUT ... The phone already stay on startup. i can see HTC startup screen,the windows startup screen ...but never the today screen.
I try hard reset, htc official rom, cookeed rom,...but when i flash a rom with "gsm", the update freeze at 13%
I try with usb and with sdcard..same thing, already stay at 13% !
But if i flash hard spl, 100%, if i flash OS, 100%, just the radio freeze at 13%
Any idea please ?
update
after the boot, i've got a "no gsm" message near the radio version
other people got the same problem like me ...
God oli, help me please
I more or less had the same thing and solved it with the sc card flash page.
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
A rom that works for me to flash it back to the working original
http://www.allaboutphones.nl/forum/request-originele-spv-m700-rom-p3600-rom-t727.html
To download you have to register with them.
GL
Hi, updating the radio to 1.56 crashed, now I have the No gsm message and doesn't boot, running mtty from bootloader with info2 command it says supercid but I can't update any official rom SPA, WWE, ITA... the error is "vender id invalid". I've tried the sd method but returns to bootloader .
Any help will be appreciated.
You should try SSPL : http://forum.xda-developers.com/showthread.php?t=293632
And if it doesn't work the Des' Crash-Proof SPL :
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
and try to flash a radio rom again !
doesn't work
try again and again ...the phone block at 13% ( when the radio upgrade begin) ...
pfffff
I've the same problem and after several attempts without result I sent the phone to the workshop and they told me the problem is with the main board! (this cost almost the price of phone itself). Moreover, I've seen some where here that the problem could be caused by radio chip but I couldnt get the detail.
If you find a solution give me a tip.
i've test lot of thing.
I progress with mtty. but i've got a problem ..i can't downgrade the phone under SPL 1.05.
SPL 1.04 can "reset" the radio, or enter directly to the radio bootloader. With that, i can save my phone.
Try mmty (see the wiki => bootloader info) and with the mfg spl, you can try the method.
Guys,
I've got the same problem...
I've sim and cid unlocked my spv m700 some time ago, using wonderful software from pof. Everything went smooth.
Today I've decided to update radio rom to 1.38.00.11 to enable gps.
I've launched RUU, everything was ok till 44%, when I've got message "Communication error".
After that program tried to recover rom without success, I've got another message "Image corrupted"...
I've tried to reboot my spv (both SR and HR), after rebooting I see:
M 05
B 05 D 1.23
then those symbols disappear and I see only Orange logo.
That's it... The end...
Should I reload radio rom or both rom and radio rom to my DEAD spv? If yes - how?
Please help as I'm very disappointed, frustrated and so on!
Thank you!
Update: A-A-A!!! I did it! I revived my spv! Let me explain how (I'm kinda new to all this rom and and ssl things, so forgive me for mistakes, if there are any):
1 I ran unbrick software. Yesterday it did not work (said, that could not find smth), but today it worked fine.
2 I ran RUU and BINGO! That's it!
BTW, I have vista, but it still worked (I think, thanks to Windows Mobile Device Center, which I have installed).
Also, I killed wmd process in Task manager in the beginning (have read this recommendation somewhere).
Thanks to everybody for their help!
nyco,
could you please explain briefly what you did exactly and which radio and rom you used
thanks and regards
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Thanks stepw...
when I hit task 2A nothing happens.
Original ROM doesnt respond. I flash with cooked ones. Result 100% successful. I restart the phone- hang at boot screen.
stepw said:
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Click to expand...
Click to collapse
Hi,
I'm already under the hard SPL. and "task 2A" not working.
Macars, try only with radio ripped or full original rom (from htc or cooked with radio) because some cooked rom have only OS.
Can you tell me what SPL you have?
Hard SPL?
Have you try splxploit ?
Can you tell me what rom you try oviplokos1 ?
thanks,
it shows SPL 9.99 and with this I cannot flash anything so what I do is to update with splxploit and then the phone changes to SPL 1.2 olipro. With 1.2 I can only flash coocked ROM and will go until the end 100% successful- (original ROM the phone does not respond), but when restarts with newly loaded cooked ROM the phone hangs at window login screen and when put it in bootloader the SPL 9.99 returns again.... the story goes on like this.
I'm becoming mad....
hi,
you can only flash cooked rom because the rom you flash contains only OS. When you flash HTC rom, the rom contains os+radio+spl+....other thing ...
Try this method to downgrade your SPL (9.99) to oli 3.20 :
1°) run splxploit
2°)when the phone reboot on the spl 1.20 oli, run HardSPL 3.20 olipro. (search on the wiki or the trinity forum
3°)upgrade to 3.20 oli ...
Now, when you go to the bootloader, you can see SPL 3.20 oli.
Try reflashing a radio only (see the upgrading topic, you will see radio 1.56.xxxx)
Tell me if this method work.
When i'm on spl 3.20 oli, i can load radio rom to 0%
when I downgrade my phone to spl 1.05, and i can run the upgrading to 7% (best score )
To downgrade to SPL 1.05:
edit the "unbrick.bat" on the splxploit folder.
Replace TRIN_HardSPL.nb to TRIN_SPL105.nb
try to find SPL 1.04. I'm sure if i got the spl 1.04 i can revive the phone
Did exactly as you said final result:
When i'm on spl 3.20 oli, i can load radio rom to 0% (and stays there )
hi,
ok, try to load spl 1.05 with splxploit, and when it is load, run radio upgrade (1.56.xxxx)
Try to find spl 1.04 and mtty it can be reset the radio bootloader
if you find 1.04, give me it
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
macars said:
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
Click to expand...
Click to collapse
arf :/
You got exactly the same problem i have.
did you check if you have bad block (with mtty)
try format the phone with mtty.
i contact pof, but he doesn't answer me
--------------------------------------------------------------------------------
Hi everyone
I failed to upgrade my Trinity Radio or to WM 6 also at the same time i cannot install any hard Spl
i get an error 270 or 260
i tried soft reset first.
but nothing seems to work
ROM version : 1.23.405.2
Rom date : 3/11/2007
Radio Version : 1.38.00.11
the bootloader menu shows the following:
TRIN100
IPL-0.5
TRIN100
SPL-1.07.0000
update1: when i try flashing it get 1% and stop and it goes back to the tri color screen with no change in the spl version.
Thanks
Best way to upgrade is to put your device manually in bootloader :
http://wiki.xda-developers.com/index.php?pagename=Trinity_Resets
Then install hard SPL (personnaly i prefer Des' Crash-Proof SPL)
And after you will be able to install a Rom Wm6.1 of your choice !
To flash your device, prefer to put your device manually in bootloader...you will have less error message !
Hope this will help
hi try it but get error 270 all the time.
image is corrupted.
you should try to re-download the ROM you are trying to flash. If you still receive this error, refer to this thread . You basically have 2 options: 1) run SSPL manually from your phone, then run the RUU from the computer to flash the ROM or SPL you want.. or 2) flash using SD card flash method
http://trinityguides.info/index.php?option=com_content&task=view&id=43&Itemid=67
Please take a look here:http://www.trinityguides.info/index.php
Bye
hi how can i charge the battery?
hi how can you charge the battery as i can only get the phone in boot only ????????? help me as i need the phone back on as i need tomtom.
thank you
Thank you all
Hi like to say thank you all for your help,
got the phone working now:d
Good to know. Thx for giving feed back. Enjoy your device then ...
I have a big problem. My SPV m700 was unlocked and working. I tried to change the rom and at 75 % I got an error. When I started the phone the scrren was blank. I have hard reset it. My spl version is 1.7.000 or something. I thinik is the original one. I wasen't able to put any other spl version. I get stuck at 1 %. The first time I have managed to change the spl was when the phone was working. Now is a brick. I still can enter in the tricolor screen. Is there any hope? Can someone help me? Thx a lot
HTC Trinity original ROM
Here is the original HTC Trinity ROM:
http://rapidshare.com/files/20284524...12201_Ship.zip
1. Press on/off button + camera button + reset (using the stylus)
2. You should now be in tricolor screen.
3. Connect the usb cable.
4. Make sure you have activesync runing.
5. Install the rom provided in the link.
In the link you will find rom+radio. (Radio version 1.20)
Here is a newer radio version 1.56:
http://rapidshare.com/files/203126613/1.56.70.11.exe
hi to all.
My problem here:
Every Rom i test, become unusable in a while.
My diamond was bricked few days ago, and i received a new one by my phisical and logical damage insurance.
I'm not a noob (but not a pro )
I've always followed instruction for rom changing. hspl, radio and rom.
I was trying to test several roms, (i'm italian, i've tryed Lovers 6.5, but was slow, so i turned back to 6.1 roms).
I've tryed Kimera, and lot of italian roms. Every time that i begin to customize them (by installations of Oxios Memory, cleartemp, google maps, restore from pimbackup, changing tf3d background, facebook linking my contacts etc) every rom stuck, become slow, and for every operation take more than a minute. Many application shortcut become unavailable, and when it is impossible to reach the reset application (different application from any roms, same problem) and attempt manual reset (soft reset) it performs HARD RESET!!!
Sometimes also performing hard reset, installation batch says "installation error", or error occourred while attempting to install (application name).
First time i was thinking about a rom problem, (strange because many other users doesn't see this problem) so i've changed to another, same problem, another rom same problem, and so on.
So i try to change hspl, from 1.93 to 1.40, same things, several tryes, same problem, so i now turn to hspl 1.34...
_________________
Edit: Hspl 1.34, 1.37 (signed or not), 1.38 and 1.93 show me (in bootloader, or three-colored screen) the same message:
In the red zone
Code:
DIAM100 MFG 64M
SPL-1.40.OlinNex
MicroP-Diam (LED) v11
In the green zone
Code:
PSOC-Diam STAGE_PVT v0x32
Is this situation normal?
_________________
Now i'm testing on 1.34 hspl. If it shows another problem?
Do you think about an hardware error on diamond?
How can i solve/fix this?
Edit: Testing in 1.34 give same problem.
Any Ideas?
Please any help needed, Thanks in advance for patient in reading my bad and ugly english...
SOLVED:
Ruu i was using for Hspl flashing was not correct.
I've tryed another one and it worked.
Now on hspl 1.93 Olinex (now visible on bootloader screen)
Roms don't crash anymore (until now XD)
Thanks for attention, problem solved, now can close this thread
So first of all I tried to install some rom on my HTC Topaz (it wasn't the first time I change roms) and something gone bad, the installing was stuck on 0% , after the reboot the phone was stuck at launching.
I tried many suggestions that I found here on the forum, but nothing helped, I did the format+reset with MTTY.
Tried to install different roms from the bootloader but it always stuck on the 0% even tried to install them from SD card...
So now I'm in bootloader and it written -
_________________________________________
TOPA100 32M
SPL -1.33.0000
Microp-Topaz (LED) v10
TURBO HW/TURBO SW
--------------------------------------------
NO TP MFG DATA
Serial
_________________________________________
So what I can do now to bring it back?
Mark N1 said:
So first of all I tried to install some rom on my HTC Topaz (it wasn't the first time I change roms) and something gone bad, the installing was stuck on 0% , after the reboot the phone was stuck at launching.
I tried many suggestions that I found here on the forum, but nothing helped, I did the format+reset with MTTY.
Tried to install different roms from the bootloader but it always stuck on the 0% even tried to install them from SD card...
So now I'm in bootloader and it written -
_________________________________________
TOPA100 32M
SPL -1.33.0000
Microp-Topaz (LED) v10
TURBO HW/TURBO SW
--------------------------------------------
NO TP MFG DATA
Serial
_________________________________________
So what I can do now to bring it back?
Click to expand...
Click to collapse
wow NO TP MFG DATA sounds bad.
is the error code error 244? or another?
(or if flashing from SD card, it should show a red number, what is the number?)
There is no errors, it's just stopes at 0% and then the phone restarts.
I heard that I need to use a 6.1 original rom, I tried few from the shipped roms on the topaz-XDAwiki , and there is a change - they stuck after 1% and not 0% ...
Maybe I need to use a different type of rom?
---
Some original roms give a 294 error (wrong rom for this phone or something)
Mark N1 said:
There is no errors, it's just stopes at 0% and then the phone restarts.
I heard that I need to use a 6.1 original rom, I tried few from the shipped roms on the topaz-XDAwiki , and there is a change - they stuck after 1% and not 0% ...
Maybe I need to use a different type of rom?
---
Some original roms give a 294 error (wrong rom for this phone or something)
Click to expand...
Click to collapse
You need to find your original ROM from HTC.com using your S/N. Hopefully they are still available.
Mark N1 said:
There is no errors, it's just stopes at 0% and then the phone restarts.
I heard that I need to use a 6.1 original rom, I tried few from the shipped roms on the topaz-XDAwiki , and there is a change - they stuck after 1% and not 0% ...
Maybe I need to use a different type of rom?
---
Some original roms give a 294 error (wrong rom for this phone or something)
Click to expand...
Click to collapse
error 294 is CID error. we can try a goldcard (PM me for one) but I suspect that the TP MFG DATA also needs to be restored so goldcard on its own may not be enough to fix it.
So how do I restore the TP MFG DATA ?
Problem solved.
On the HTC.com I needed to choose the right region - so I guessed right at the 3rd guess (Thailand) - wrote the SN and downloaded the official rom, now the phone works fine .
Thank you guys.
here is my problem. yesterday i tried to flash Shaks.Pv4.30Full_DiamondKB rom, from ROM.dia.1.7.0_100625. i did mtty (task 29) and started to flash as i did many times before.
however at 6% flash my hdd decided to make an epic fail, and died. after i sorted out my computer (new hdd, new win7...) i did mtty again (worked fine) and tried to flash. however (at 1%) now i get error 226:
when i reset phone goes directly into bootloader and gives: "Upgrade ROM code error. Please try again"
i have tried to flash Gen.Y D2 R5.5 WWE, RaL.GT1K, ROM.dia.1.7.0_100625, Duttys_5.2.20764.1.4.3_V4_Full_CVSD__3.02_, RUU_Diamond_HTC_WWE-ME_1.37.456.2_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship (stock diamond), RUU_Victor_TMO_UK_1.37.110.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship (stock mda compact 4), and tlr-diamond-3.08.07.16.
all other roms fail at 1%, but tlr rom fails at 16%, and stock diamond and mda roms fail at 13%.
my phone is mda compact 4. before i have flashed hardspl olinex 1.93 unsigned, and radio 1.17 (from blackstone).
at the moment i really don't know what should i do next (i'm hoping it's not completely lost because i can get into bootloader), so any help would be appreciated.
Damn... This is Harsh.. I Hope someone can provide you with a solution.. I'm subscribing to this thread just in case something like this happens to me also
well, officially, my mda compact was bricked
but fear not, it can be resurrected, via JTAG (some shop did it for a price)...
however i do have a question, now when i enter bootloader it says:
DIAM100 64M
RIFFBOX RESURRECTED!
PSOC-Vict Stage_PVT v0x20.
now i wonder if it's ok to flash again unsigned HardSPL, and custom rom?