Related
hey, i got an issue with xposed on my LG G5 (H850).
my device runs on V20s-EUR(7.0) with unlocked BL, SU 2.82 and
installed xposed v89-sdk24.
With running Xposed, every app-installation, update is blocked (via play store or apk)
but when it's disabled by app... everything works fine.
So is there a way to fix this? any ideas?
sry for asking. found a solution.
i've forgotten busybox
Hi everyone,
I am pretty new to rooting, flashing, modding etc.
My problem is as follows:
I am on Pie 10.0.1.0PDIMIFJ, upgraded to it thanks to a guide in this forum.
After upgrading (bootloader has been unlocked beforehand of course) I got root through patched boot.img and Magisk Manager.
I did this in order to be able to gain some everyday treats such as Youtube background playing and especially V4A.
I could install these modules via Magisk, but they do not seem to work.
V4A is asking for driver installation everytime I reboot my phone, and I have to reboot after every driver installation.
This happens independently from the version of Viper I am trying to install.
After installing Youtube Vanced nothing changes. Playing stops when closing the app while a video is turned on.
I also tried a couple of other modules but none seems to be working.
I read somewhere that this could be connected to "SELinux permissive" something . I am sorry, I do not really know what that's about but maybe someone out there could give me a hint as to where I have to look.
I do not need a guide or anything, don't mind learning something on the way
Help would be greatly appreciated.
Thank you guys in advance
Anyone?
Same/similar issue
I am also experiencing the same issue, was able to install Viper and pixel Camera mod, then after no matter what module I install it does not show up in the app drawer atleast, I tried App systemizer , Cloudfare DNS and SF font.. nothing seems to work than the first installed two modules. Tried to install and remove them multiple times.
Cleared magisk cache
installed M<agisk from TWRP multiple times.
tried to install modules from TWRP as well.
I am so new to all these, please dont mind any mistakes.
Thanks.
The same problem I got.How to do to enable camera 2api.
So I had trouble installing Viper through Magisk on Pie on my Exynos Note 9. It always told me to reinstall the drivers, but that didn't seem to work.
But I found a solution:
On XDA-Labs is a new version of viper available (Version 2.6):
https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Simply install this version (I chose the beta), give it root permissions and you are set!
I also installed audio modification lib from Magisk to be on the safe side.
Only issue I noticed is that YouTube videos seem to hang for a few seconds before they start playing (I am using YouTube vanced from Magisk). Apart from that everything seems to be working well!
Hope that helps everyone who is having trouble on Pie!
It isn't asking me for root permission?
Strange.
But you are rooted with Magisk and have Magisk Manager installed?
Is the app showing up in Magisk Manager under the SuperUser section?
Maybe trying to install the app again solves your issue.
Rowe90 said:
Strange.
But you are rooted with Magisk and have Magisk Manager installed?
Is the app showing up in Magisk Manager under the SuperUser section?
Maybe trying to install the app again solves your issue.
Click to expand...
Click to collapse
Correct, and nope it isn't showing up in the superuser section. Re-installing did nothing, it isn't working without root, atleast that's why I think it isn't working.
aussiesausage said:
Correct, and nope it isn't showing up in the superuser section. Re-installing did nothing, it isn't working without root, atleast that's why I think it isn't working.
Click to expand...
Click to collapse
Yeah it needs root to put itself into some system files.
I just saw they released an update yesterday which is know marked as stable. (version 2.7). Maybe you have better luck with that.
It was working on 2.7 but it suddenly stopped
Now it's not enabled and not processing
Don't know how to fix
(Btw on Samsung Galaxy A8)
This was the only thing that worked. I've been trying different things and searching for hours. The stable version does not work on my exynos note 9. The beta does though!
On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks
hycraig said:
On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks
Click to expand...
Click to collapse
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk
vash_h said:
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader
hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Biggest_Noob said:
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader
Click to expand...
Click to collapse
My safteynet passes fine on both my devices
Thanks
somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).
h4lli said:
somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).
Click to expand...
Click to collapse
thanks @h4lli i couldn't see sky go version 13.1.1 for uk
so i got Sky Go UK 12.4.14 from apkmirror and can confirm is working fine
yeah still doesnt work, latest sky go app 20, latest magisk, still detects, anyone able to reverse the sky app to see what methods its using?
Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy
beardymarrow said:
Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy
Click to expand...
Click to collapse
Yeah still can't get it working. Damn it.
Hast everyone a sollution for running the sky Go App on rooted phones?
Skygo doesnt Work... hast anyone a sollution?
eula1977 said:
Skygo doesnt Work... hast anyone a sollution?
Click to expand...
Click to collapse
Have you tried this? It worked for me
SkyGo app detected root!
Hi everyone i have a problema using SkyGo app on my device because It detects the root. I renamed magisk , used magisk Hide , tried magiskhide props config , tried to delete cache and re-install SkyGo app but nothing worked...any solution...
forum.xda-developers.com
Hi everyone,
I'm just hitting my head against the wall with this applciation...
I'm running OP6 with evolution X 4.5.
This app refuses to let me uses it saying that "There's an error, Check if usb debugging is activated. Check if you're rooted or if a custom rom is installed"
I've tried magisk hide, also hidding some google services, usb debugging isn't activated,...
It's the only app I knoiw so far that can detect root on my phone.
Can anyone help me find a workaround please?
thanks.
Same here...
I am using MicroG without Safetynet support and I think that is the issue, unfortunately.
Payconiq by bancontact / rooted device
Hello
I have the same problem with OP6 rooted ... magisk hide activated but when run the payconiq Bancontact app " There is an error " not possible to run the app.
Anybody for a solution ?
veronesi.n said:
Hi everyone,
I'm just hitting my head against the wall with this applciation...
I'm running OP6 with evolution X 4.5.
This app refuses to let me uses it saying that "There's an error, Check if usb debugging is activated. Check if you're rooted or if a custom rom is installed"
I've tried magisk hide, also hidding some google services, usb debugging isn't activated,...
It's the only app I knoiw so far that can detect root on my phone.
Can anyone help me find a workaround please?
thanks.
Click to expand...
Click to collapse
I used to use an old apk of the app but now it doesn't let me use it and forces me to upgrade to last version.
My wife's app is working well but she has a lg g7 thinq unrooted.
So if someone can help, it would be very much appreciated as every other app is working well, safety net is passed, and this app is my only way to pay contactless because my banking app doesn't have a payement option in it.
I'm using it without issues. I hide it and just turn off USB debugging when I'm using it.
Just to make sure, did you just enable Magisk Hide in the options and nothing else?
Or did you also - after enabling - go into the Magisk Hide option that now appeared in the menu and placed a checkmark after all programs for which you want to hide Magisk from, in this case Payconiq ?
Clear Payconiq cache and data, reboot and setup Payconiq.
I have the same problem.
Magic hide is enabled. USB debugging is disabled.
In the Magic hide menu, the Payconiq app has a checkmark. All my other banking apps work fine.
Phone = Samsung J7 (2016)
Does someone have a solution?
Thanks
What's your problem with this app Can't you run it Can someone show what message is showing For me, this application is not available in my country, so I downloaded it from outside. I have Magisk 21000 root and Magisk manager 8.0.2 (307) (11) and it works for me and nothing is screaming about root etc :highfive:
It is the "Payconiq by Bancontact" app.
It worked on my phone without root. Since my phone is rooted, it doesn't work any more.
My phone is rooted with Magisk 20.4 (20400) and Manager 8.0.2 (307)
When I use the app: I receive this message. I hope this can help...
Date: 12 Oct 2020 15:23:47 GMT+02:00
Device: samsung SM-J710F
App version: 5.5.3
OS version: 8.1.0
App token: /
Failure code: ERROR_SDK_INTEGRITY (81)
Hello,
Problem solved.
Thanks to Spartacus500 .
I ’ve seen there is an other version of Magisk. I didn’t even know there was an update. :silly:
I did the following thinks:
In Magisk Hide menu, uncheck Payconiq app.
Stopped Payconiq app and Cleared data.
In Magisk Hide, place checkmark at payconiq app.
Installed Magisk 21.0 (21000) Beta.
Reboot.
Run Payconiq app, and it works fine
Hope it stay this way :fingers-crossed:
Veke123 said:
Hello,
Problem solved.
Thanks to Spartacus500 .
I ’ve seen there is an other version of Magisk. I didn’t even know there was an update. :silly:
I did the following thinks:
In Magisk Hide menu, uncheck Payconiq app.
Stopped Payconiq app and Cleared data.
In Magisk Hide, place checkmark at payconiq app.
Installed Magisk 21.0 (21000) Beta.
Reboot.
Run Payconiq app, and it works fine
Hope it stay this way :fingers-crossed:
Click to expand...
Click to collapse
Which version of the app did you use?
Is it 5.5.3?
Can you share the apk?
I tried 5.8.3, 5.5.3 and 5.3.3 but there are all stuck at the start.
I am passing all checks on rootbeerfresh (root checker).
flotheking said:
Which version of the app did you use?
Is it 5.5.3?
Can you share the apk?
I tried 5.8.3, 5.5.3 and 5.3.3 but there are all stuck at the start.
I am passing all checks on rootbeerfresh (root checker).
Click to expand...
Click to collapse
I use the "Payconiq By Bancontact" app. I don't know which version it was that worked before, but after an update I can not run it anymore on a rooted phone.
I will send you the apk of the "Payconiq by Bancontact" app. Hope you can find a solution.
I tried the other app (Payconiq) version 4.3.5.3 (latest) and it seems to be working.
flotheking said:
I tried the other app (Payconiq) version 4.3.5.3 (latest) and it seems to be working.
Click to expand...
Click to collapse
sorry for bumping an old thread but what are you using now?
In my case I'm still using the old Payconiq and I don't know what I'm going to do when it gets finally phased out.
Well, I'll just pay in another way I guess.
seeschloss said:
In my case I'm still using the old Payconiq and I don't know what I'm going to do when it gets finally phased out.
Well, I'll just pay in another way I guess.
Click to expand...
Click to collapse
thx for responding, what version are you using?
5.14.1 Payconiq app works for me Magisk hide root
Spartacus500 said:
5.14.1 Payconiq app works for me Magisk hide root
Click to expand...
Click to collapse
sadly not working for me, when i hide app in magisk, launching gets aborted without error message
got it working again
latest magisk, latest riru, lsposed, gravitybox all installed without issues to payconiq
payconiq app hidden in magisk, magisk manager isn't hidden
the thing that got it working again was disabling magisk module G-visual mod, same for magisk module fullscreen immersive gestures. Apparently payconiq app doesn't like keyboard spacing to be changed ????
i'm quite happy that i found it, but if anyone could explain i'd very gratefull
Hello,
Can I also ask a question, please? How can payconiq detect that someone is using a custom-rom? I also get a message that I am using a Custom-rom and that it is not possible to install. However, I have not installed MAGISK and my phone is not rooted.
Thanks
Andi
Bergfex2 said:
Hello,
Can I also ask a question, please? How can payconiq detect that someone is using a custom-rom? I also get a message that I am using a Custom-rom and that it is not possible to install. However, I have not installed MAGISK and my phone is not rooted.
Thanks
Andi
Click to expand...
Click to collapse
Could be detecting your unlocked bootloader, various prop values, etc. For a list of props that are common detectors, and that MagiskHide changes (which of course is removed in the next stable release) you can check here:
https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf#setreset-magiskhide-sensitive-props