I have factory reset my watch to reconnect with a new Lenovo Vibe X2
The android wear app sees the phone and it is listed but when I click it fails to connect.
I am getting a message saying:
"Unable to pair with G Watch R 31B9. Incorrect PIN or password"
There is no way to enter any PIN since this should be automatically set by the Android wear app.
Any ideas?
rankorn said:
I have factory reset my watch to reconnect with a new Lenovo Vibe X2
The android wear app sees the phone and it is listed but when I click it fails to connect.
I am getting a message saying:
"Unable to pair with G Watch R 31B9. Incorrect PIN or password"
There is no way to enter any PIN since this should be automatically set by the Android wear app.
Any ideas?
Click to expand...
Click to collapse
Have you tried to reset/wipe the wear app on phone?
miffymiffy said:
Have you tried to reset/wipe the wear app on phone?
Click to expand...
Click to collapse
Yes, did a data wipe and a full uninstall and reinstall.
Try adb to watch
adb shell am start -a android.bluetooth.adapter.action.REQUEST_DISCOVERABLE
Click to expand...
Click to collapse
and see if it will allow you to connect this way
Here comes the Lollipop update review of Lenovo Vibe X2 https://www.youtube.com/watch?v=9YhDjUpwny0
The same thing happened to my with a Honor 3C that was previously paired with the watch and the cleaning data and then cache of Android Wear app in the phone solve the problem!
I had issues pairing with my Sony Xperia Z3 compact as well. Did a full reset of the watch without it helping. Had to turn off "stamina mode" which is a power saving feature on the phone to make the pairing work. Don't ask me why, but that helped me.
Last week i had the same problem (again), but this time after upgrading my Honor 3C! I try all the solutions I could find on the net, but none have solved... so after 2 days of trying everything (I even factory reset my phone and watch) I solved the problem... so you could try this!
1 - reset your watch;
2 - pair with other device (not your phone) like a tablet (I pair mine with my tablet);
3 - wait until the watch get set;
4 - go to the configuration menu on the watch and select bluetooth connection;
5 - put your phone bluetooth on and in visibility mode;
6 - wait until the watch find the phone and pair with him;
7 -with the phone and watch get paired, reset the phone;
8 - pair with the phone via android app!
I know that is a little confusing and with a lot of step, but in my case solved the problem since this way the phone received the correct pin from the watch, allowing for connecting with android wear app!
Related
Updated my gear 1 to tizen and also my note 8 Ltd to 4.2.2 using the official Germany dom. ...
Watch pairs with phone both showing code but then......nothing.......tries to connect to watch and fails.....
am I missing something
please help cos right now I hate Samsung so much for making this gear not work
I had that happen while trying to flash a custom recovery and failing which resulting in the watch hard resetting itself. My phone would recognize and pair with the watch but it would go in an endless connecting spree. The solution is to go into your Gear manager and gear plugin app info on the phone or tablet and just clear the data. Or you could just uninstall/reinstall the app and it should do the trick.
BlackDave said:
I had that happen while trying to flash a custom recovery and failing which resulting in the watch hard resetting itself. My phone would recognize and pair with the watch but it would go in an endless connecting spree. The solution is to go into your Gear manager and gear plugin app info on the phone or tablet and just clear the data. Or you could just uninstall/reinstall the app and it should do the trick.
Click to expand...
Click to collapse
Have removed all traces of GM and installed a diff version...cant remember which one I first got that worked...could it be the GM thats doing this and not the version of android
Thanks to Tizen I have just bricked my watch, what a complete joke this is
No more smart watches for me ive had enough
Do a search
http://forum.xda-developers.com/showthread.php?p=53630254
Sent from my SM-G900T using Tapatalk
I installed the android wear google app to check it out. After uninstalling it, reinstalling and uninstalling again, wiping cache including play services cache. The aformentioned in the title just wont go away! Any suggestions or insights? I have the 64gb Turbo.
Does it say "boot loop sync" if it does then you have developer options on. Turn that off and the message will go away.
Wait, do you even have a wear device do connect to? You have to have a watch of some type for it to connect to anything.
It will always show in your notification bar when it is trying to connect to a watch one you have Bluetooth turned on.
I'm assuming you don't have a watch which leads me to the most important question, why are you installing android wear if you don't have a wear device connected?
I have a chinese clone bt watch but it doesnt use android wear. I installed the app to check it out for i will be getting a wear compatible watch soon. The watch is currently connected to my phone but the android wear connecting notification is still there. And i do not have debugging enabled.
jndd333 said:
I have a chinese clone bt watch but it doesnt use android wear. I installed the app to check it out for i will be getting a wear compatible watch soon. The watch is currently connected to my phone but the android wear connecting notification is still there. And i do not have debugging enabled.
Click to expand...
Click to collapse
You answered your own question. If it's not compatible with android wear then wear is still going to be searching for a device to connect to
Sent from my XT1254 using Tapatalk 2
I did not have this issue when i first got the watch. I use a bt notification app and it syncs through that app. I installed wear a couple weeks after abd did not have this issue until after i uninstalled the wear app.
ok since no one else has helped I will bump this up again.I uninstall Android wear and all the other Bluetooth applications I tried with the watch I turn the Bluetooth off so nothing should be paired and I wiped Google Play services cache restart and its still trying to connect android wear.
jndd333 said:
ok since no one else has helped I will bump this up again.I uninstall Android wear and all the other Bluetooth applications I tried with the watch I turn the Bluetooth off so nothing should be paired and I wiped Google Play services cache restart and its still trying to connect android wear.
Click to expand...
Click to collapse
Why don't you post this in the android wear section? If you uninstalled android wear and it's off your phone I don't see how android wear can be requesting access unless there's a setting on your watch
Sent from my XT1254 using Tapatalk 2
Hi guys, I have been having an issue with the watch not being able to connect with my phone whilst being paired- not sure if its a watch specific issue or phone issue,
The bluetooth works fine will all other devices: car/speakers they will pair + connect automatically.
However, when i try to connect with my watch, there is no problem in pairing the devices (the code thing what not) but after the pairing, the devices wont connect automatically, and whenever i try to connect the devices, i dont get any response from the phone. E.g., if i tap on my paired devices with my speaker, it will try to connect and shows "connecting..." but if i tap on the watch, nothing happens, not even an attempt to connect, simply stays at not connected. I removing the pairing and resetting the watch, as well as restarting both devices, but issue still persists. Unsure if this is a problem with my phone or the watch itself, as the phone has no problems with connecting with other devices. Havent been able to try the pairing the watch with a different phone (i dont have a spare phone i can try connecting with atm, but will try that later on in the week by borrowing a phone off friend.)
Issue is even stranger considering i had no problems using the watch with this exact phone beforehand, (i just stopped using it for about 6 months because i lost my watch charging station and i couldnt be bothered to get a replacement until now.....)
The watch has been updated to the latest version, and the phone in question is galaxy alpha, running android 5.0.2
Thanks guys.
same here.....i did not find a solution
watch not work with "Android Wear app". tested in 3 devices (different ROMs)
some basic ideas??
livin1 said:
watch not work with "Android Wear app". tested in 3 devices (different ROMs)
some basic ideas??
Click to expand...
Click to collapse
what errors are you getting? Why isnt it working, whats happening?
installation run no problem. not paired with app
paired via bluetooth no problem
in app not see watches
tested in 3 phones
problem is in watches
I do not understand!!!!
solved!! factory reset via recovery https://www.youtube.com/watch?v=Kg8-vjZV2g8
factory reset in menu not helping
Hello, everybody
Before I did the update to Android 9 on my Huawei P20 Pro, AA worked fine in combination with the Opel Intellink. Unfortunately, this has changed to a disadvantage since the update. As soon as I connect my mobile phone with the USB cable, the system asks me which USB option I want. So far so good.
But now it comes: As soon as I activate "Android Auto" in the Intellilink 4.0 settings, my phone crashes and tries to reboot. I already tried everything possible:
- other cable
- AA de- and newly installed
- Bluetooth newly paired
- USB debugging enabled (developer mode enabled)
- USB option set to MTP
- Wipe Cache partition performed
nothing helps.
Even if I don't have AA installed it crashes.
Does anyone have this phenomenon too?
Without activation this is not a problem. Bluetooth also works here.
Many thanks in advance for any suggestions or solutions.
Greetings Finrok
Me too - solution please?
Same here. Working just fine before the update. Now whenever I connect the phone to the car via USB it crashed and reboots. Tried the same as above but I can't see a solution.. I've managed to get it working since by uninstalling and unpairing the device. Plugging it in and reconnecting. But as soon as I unplug and go again next time it crashes again and reboots as before.
Not an issue with the cable, cache or Bluetooth.
May also be worth noting, I also have a p20 pro. Brand new in November
Has anyone figured it out? Please!
Was it OTA update or one of the methods from the forum (eRocovery, OTG)?
Is factory reset an option for you?