hello xda ,
I hope iam right here its my first thread i´ll hope u forgive me for my english i gave my beste
Ok now my problem i have an s3 lte 19305 it was rooted for usually 2 months than i got it to Stock rom
now yesterday my battery was empty i plug it in the recharger and it load i want to start it and it loops in the bootloader only the samsung logo with the blue color was there . i´ll have do a wipe cache a full wip and a new install for custom rom with philz
and it stucks with stock and custom
ill hope u can help me
See ya later
Ps : the start sound fuxx me up .D
You probably don't have a stock ROM. I bet you still don't have Knox and you installed ROM that should have it.
You need other S3 device, and charge your battery with it until your device will boot on it, so you can charge it normally. Then install stock ROM again and it will do.
Wysłane z mojego GT-I9305 przy użyciu Tapatalka
painball said:
You probably don't have a stock ROM. I bet you still don't have Knox and you installed ROM that should have it.
You need other S3 device, and charge your battery with it until your device will boot on it, so you can charge it normally. Then install stock ROM again and it will do.
Wysłane z mojego GT-I9305 przy użyciu Tapatalka
Click to expand...
Click to collapse
well my device will be charge normally with the s3 i use but it stucks in the bootloop i´ll have full loaded my battery and it doesnt work i installed it 2-3 times
well i try to fix it with a custom rom
and i think there is an error here is an screenshot
shuksieno123 said:
well i try to fix it with a custom rom
and i think there is an error here is an screenshot
Click to expand...
Click to collapse
Looking at ur picture installation was fine. Some ROMs still have problems unmounting system partition once flashing is done.. After flashing wipe data and cache then try to boot
Sent from my GT-I9305 using XDA Free mobile app
Related
Hello everyone!
Yesterday i have flashed Jelly Bean rom- rXtreme. I came from cm, because of extremely high battery drain(9hours -100% without playing games and surfing on the net). I like touchwiz, so I flashed rXtreme rom made by r_i_x. Everyone is just fine, except the camera. When i flashed stock or agni kernel phone had system fcs after turning on the camera app. When i flashed boeffla it doesnt fc, but i have black screen. What can i do? Sorry for my english guys.
PS. I did full wipe even with format internal sd and system folder.
Wysłane z mojego GT-I9305 przy użyciu Tapatalka
matrix929 said:
Hello everyone!
Yesterday i have flashed Jelly Bean rom- rXtreme. I came from cm, because of extremely high battery drain(9hours -100% without playing games and surfing on the net). I like touchwiz, so I flashed rXtreme rom made by r_i_x. Everyone is just fine, except the camera. When i flashed stock or agni kernel phone had system fcs after turning on the camera app. When i flashed boeffla it doesnt fc, but i have black screen. What can i do? Sorry for my english guys.
PS. I did full wipe even with format internal sd and system folder.
Wysłane z mojego GT-I9305 przy użyciu Tapatalka
Click to expand...
Click to collapse
Mate there is a link to this issue in this post http://forum.xda-developers.com/gal...05/kernel-boeffla-kernel-5-1beta12-t2322893#2
Q&A For released Roms and bug report to avoid off topic on development thread ..
so feel free to ask or anything ..
ROMs
OFFICIAL AICP ROM 4.4.2
UNOFFICIAL Omni 4.4.2
OFFICIAL VanirAOSP 4.4.2
SOKP 4.4.2
@vickyushu can you link me your blog/website?
I searched but didnt find.
guyshelpmeplease said:
@vickyushu can you link me your blog/website?
I searched but didnt find.
Click to expand...
Click to collapse
just see my signature
http://milivic.wordpress.com/
I installed your VanirAOSP 4.4.2 but I had no network, the baseband and also the IMEI were unknown. I followed all steps for installation. I used TWRP, and was on a stock firmware when I did the installation. Returned to stock via ODIN and network was back and so was the IMEI. What could be cause of this. It also happened with 2 other 4.4.2 roms. Most puzzled.
bobfrantic said:
I installed your VanirAOSP 4.4.2 but I had no network, the baseband and also the IMEI were unknown. I followed all steps for installation. I used TWRP, and was on a stock firmware when I did the installation. Returned to stock via ODIN and network was back and so was the IMEI. What could be cause of this. It also happened with 2 other 4.4.2 roms. Most puzzled.
Click to expand...
Click to collapse
use cwm to flash if u r using vanir stock recovery work too just flash data and cache and try again the new build everything working fine let me know if u still facing such problem
vickyushu said:
use cwm to flash if u r using vanir stock recovery work too just flash data and cache and try again the new build everything working fine let me know if u still facing such problem
Click to expand...
Click to collapse
Should I flash the kernel with UKF and reboot to recovery and then install it?
bobfrantic said:
Should I flash the kernel with UKF and reboot to recovery and then install it?
Click to expand...
Click to collapse
u can use that too but there is no need i flash it simple it work try cwm instead of twrp
Really liked aicp rom very smooth
I flashed cpu oc kernels of any rom that worked rom booted and everything was fine
but when i want gpu and cpu oc kernel then i flashed oc kernel of omni 4.4 , resurrection remix roms oc kernel and phone goes in bootloop i dont want to download whole latest rom of aicp that have cpu and gpu oc kernel can u give me its boot.img
Sent from my GT-I9070 using xda premium
Android operating system (above one) is draining battery, battery dropped approx. 20% at night. How to "fix" this?
coffeecore said:
Android operating system (above one) is draining battery, battery dropped approx. 20% at night. How to "fix" this?
Click to expand...
Click to collapse
Turn off internet overnight. Syncing is draining battery.
shut_down said:
Turn off internet overnight. Syncing is draining battery.
Click to expand...
Click to collapse
Had internet turned off, data and wifi.
Can't install xda app, gettings this error: Couldn't install on USB storage or SD card, I can install other apps but not xda app
hello
shut_down said:
Turn off internet overnight. Syncing is draining battery.
Click to expand...
Click to collapse
Hello everyone.
My English is not good. Please forgive me.
I come from China forum, like brush ROMs.
··But the Great Wall firewall, cause I can't download your compiled ROMs,
which is a pity!
But I can download SkyDrive here, 【dev-host ]and【mediafire.]you can use ROMs to upload it?
i like yours ROMs VanirAOSP,can you upload it on dev-host ]or【mediafire? thank you!
We Chinese fans will thank you for your kindness!
CHINESE Customers said:
Hello everyone.
My English is not good. Please forgive me.
I come from China forum, like brush ROMs.
··But the Great Wall firewall, cause I can't download your compiled ROMs,
which is a pity!
But I can download SkyDrive here, 【dev-host ]and【mediafire.]you can use ROMs to upload it?
i like yours ROMs VanirAOSP,can you upload it on dev-host ]or【mediafire? thank you!
We Chinese fans will thank you for your kindness!
Click to expand...
Click to collapse
Did you checked his blog? This ROM is hosted on both sites dev-host and mediafire.
http://milivic.wordpress.com/
How is perfornance in this ROM ?
And how about battery backup ?
Is this rom more stable than CM 11 ?
Wysłane z mojego GT-I9070 przy użyciu Tapatalka
I like AICP rom..evry feature of this rom is awesom...2 dayz ago i installed this rom but after charging why its show auto charging..i mean to say my mobile was not connected to charger and its show charging indicator...tell me wat to do to resolve this issue..now i revert to other rom n evry thing is running perfect & with any auto charging issue.
Sent from my GT-I9070 using XDA Premium 4 mobile app
sandeep_chawla007 said:
I like AICP rom..evry feature of this rom is awesom...2 dayz ago i installed this rom but after charging why its show auto charging..i mean to say my mobile was not connected to charger and its show charging indicator...tell me wat to do to resolve this issue..now i revert to other rom n evry thing is running perfect & with any auto charging issue.
Sent from my GT-I9070 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i see this soon and i fixed this in my next build
MikiGry said:
How is perfornance in this ROM ?
And how about battery backup ?
Is this rom more stable than CM 11 ?
Wysłane z mojego GT-I9070 przy użyciu Tapatalka
Click to expand...
Click to collapse
which rom u r talking about
vickyushu said:
which rom u r talking about
Click to expand...
Click to collapse
Oh soory.
I was thinking about AICP.
Wysłane z mojego GT-I9070 przy użyciu Tapatalka
I installed the latest Vanir ROM and i have a little bug. I cannot preview the ring and the notification sounds. I scroll down and selecting some sounds but no sound is heared. Phone rings normally when someone calls me.
Sent from my GT-I9070 using XDA Free mobile app
Hi all,
I have flashed many roms on my LG 2X and lastly I have tried to flash SlimRom 4.4 but stuck to boot logo. I have read the thread and that seems to be a problem for some users since this is a test rom.
What I want to know is this:
I have used for some time tonyp's 10.2 rom which I liked alot. But then used AIO tool and NVFlsh to repartition my phone.
Last time I used AIO and partitioned my phone to NBTL, unlocked with TWRP 2.6. My problem is that when I flash CyanMod 10 it stucks on boot logo , 10.1 fails during flashing and tonyp;s 10.2 boots to setup wizard and then I get a wizard crash message. Also SlimRom 4.4 sticks in boot logo .
I can install MOKEE rom ok ( which I like alot ) and also Optix.
The problems seem to relate to CyanMod based Roms. Do you have any ideas why this might happen
themistoklisv said:
Hi all,
I have flashed many roms on my LG 2X and lastly I have tried to flash SlimRom 4.4 but stuck to boot logo. I have read the thread and that seems to be a problem for some users since this is a test rom.
What I want to know is this:
I have used for some time tonyp's 10.2 rom which I liked alot. But then used AIO tool and NVFlsh to repartition my phone.
Last time I used AIO and partitioned my phone to NBTL, unlocked with TWRP 2.6. My problem is that when I flash CyanMod 10 it stucks on boot logo , 10.1 fails during flashing and tonyp;s 10.2 boots to setup wizard and then I get a wizard crash message. Also SlimRom 4.4 sticks in boot logo .
I can install MOKEE rom ok ( which I like alot ) and also Optix.
The problems seem to relate to CyanMod based Roms. Do you have any ideas why this might happen
Click to expand...
Click to collapse
+1
No one??
Sent from my LG-P990 using Tapatalk
Try another recovery...
I did, I also tried unbrick, not much luck
Sent from my washing machine
So I have tried cwm 5 and 6, twrp, cannot setup cwm touch , also tied unbrick, AIO and NVFlash to restore to 28v.I managed to setup my phone to cyanogen mod but with the old bootloader and when I repartitioned to new I had the same problems. Any ideas?
Sent from my washing machine
Sorry i don't know how i can help you...
Anyone else ?
Sent from my washing machine
Maybe u got a bad baseband?
Wysłane z mojego LG-P990 przy użyciu Tapatalka
Ahh baseband...that may do the trick. I remember I installed some baseband 1-2 years ago but did not do anything with baseband since. I will give it a try. Thank you
Sent from my washing machine
Which os are you using. If windows 8 you should remove driver signature as the first point. Also make sure you use usb2.0 and a proper cable and no usb hub.
I don't use PC to flash, I flash from recovery , I only use my phone
Sent from my washing machine
Well, you have to use computer to flash baseband, nvflash rom and also kdz and smartflash. I suggest you try smartflash for baseband and nvflash for rom. Then your phone should be good.
I will try to flash baseband ( I just saw I have v10) .thank you guys with will post if it works
Sent from my washing machine
cm 11 help
hi all,
Could anyone help in that,
I would like to try the newest
cm-11-20140509-UNOFFICIAL-p990.zip
but i can't flash it. its stops.
I have twrp.
There is any method/trick to make it work?
Change/delete/overwrite files in the zip?
I can`t attach to the computer so I can`t change the twrp to cwm
and I can`t use the AIO toolkit, because it doesn`t recognise the
PC. Suddenly just gone this part of the usb.
Thank you for the answer/s and help.
Have a nice day.
Rspct!
lewis8228 said:
hi all,
Could anyone help in that,
I would like to try the newest
cm-11-20140509-UNOFFICIAL-p990.zip
but i can't flash it. its stops.
I have twrp.
There is any method/trick to make it work?
Change/delete/overwrite files in the zip?
I can`t attach to the computer so I can`t change the twrp to cwm
and I can`t use the AIO toolkit, because it doesn`t recognise the
PC. Suddenly just gone this part of the usb.
Thank you for the answer/s and help.
Have a nice day.
Rspct!
Click to expand...
Click to collapse
Could you provide more details? What error do you get? Have you chosen the correct bootloader version?
cm11 help
rugglez said:
Could you provide more details? What error do you get? Have you chosen the correct bootloader version?
Click to expand...
Click to collapse
Hi,
thanks for the quick reply.
the message is the next
error executing updater binary in zip
so maybe need to manipulate the file somewhere.
just like when you want to install the tonyps 0217
need to delete the setupwizard.apk otherwise freeze at first screen.
so do you have any idea why get this message?
how can i know the correct bootloader?
thank you.
cheers!
Tell us how looks your logo at start when you are booting its a white or a colored one
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
For cm11 u need new bootloader (the colored)
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
cm 11 help
Wooby said:
Tell us how looks your logo at start when you are booting its a white or a colored one
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
For cm11 u need new bootloader (the colored)
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
Click to expand...
Click to collapse
Hi,
I have colored one when its booting.
I have already the tonyp's 20140217 version on it.
It works fine a cuple of things what is a bit annoying
like wifi sometimes turns off, sometimes the touchscreen doesen`t sens
yeah and the camera but for that is no remedy... ((
I live with this for a while
so I just wanna try the new one maybe fixed these things.
do you have any idea how can install with just flash on the phone?
thanks for the help.
have a nice day....
Ok download the recovery files from evils thread put them in aio toolkit folder search there for another recoveries and put it there next change your recovery with the awesome toolkit
After this flash the rom and kernel and gapps and it should work
If not ask evil how to do it
Have a nice day
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
---------- Post added at 01:32 PM ---------- Previous post was at 01:31 PM ----------
Ah i see it now you can do it only on your phone? Sorry if yes ;(
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
at night when the mobile is charging the phone may restart just me. but only and exclusively for the night to be with the charger. any idea. I mashed the ultimate rom 2.3 xsp
ck_chaka said:
at night when the mobile is charging the phone may restart just me. but only and exclusively for the night to be with the charger. any idea. I mashed the ultimate rom 2.3 xsp
Click to expand...
Click to collapse
I have that on CM11 and eXistenZ.
On Existenz my phone turns off, at night while is charging, and alarms not works. Now i have to charge on day.
Enviado desde mi C5303 mediante Tapatalk
ck_chaka said:
at night when the mobile is charging the phone may restart just me. but only and exclusively for the night to be with the charger. any idea. I mashed the ultimate rom 2.3 xsp
Click to expand...
Click to collapse
1) post your questions on proper forum --> Sony Xperia SP Q & A
2) tell more about your problem,what did you do when your phone reboots,what kernel do you use and what's the version number of your kernel etc
and-roid007 said:
1) post your questions on proper forum --> Sony Xperia SP Q & A
2) tell more about your problem,what did you do when your phone reboots,what kernel do you use and what's the version number of your kernel etc
Click to expand...
Click to collapse
Xperia SP C5303, 13W16, CM11 FXP320, Williams Kernel v2.
Vivaz90197 said:
Xperia SP C5303, 13W16, CM11 FXP320, Williams Kernel v2.
Click to expand...
Click to collapse
there's not enough info.did you overclocked/undervolted?
if yes,it might be your problem so back to stock freq/volt
edit : ask kernel developer, he will help you,i hope
1,4GHz and 27,5mV, it is stable.
Wysłane z mojego C5303 przy użyciu Tapatalka
I've been extensively using the read mode on miui. I've flashed Slim 7 now. I've tried using 4-5 other apps from Playstore and didn't like any of them. Is there a way to get the default read mode of miui on other roms?
gulshanrajput said:
I've been extensively using the read mode on miui. I've flashed Slim 7 now. I've tried using 4-5 other apps from Playstore and didn't like any of them. Is there a way to get the default read mode of miui on other roms?
Click to expand...
Click to collapse
Some cm based roms for example ressurection remix have live display in their rom. It is the same feature with read mode.
Did you try cf.lumen? It is even better than stock miui reading mod but it need root for that (other way it works like overlay).
Wysłane z mojego Xiaomi Mi5 przy użyciu Tapatalka