Related
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
SREEPRAJAY said:
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
I already done this but the usb won't work and the same cable works with another p990. :crying:
torq1337 said:
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
Click to expand...
Click to collapse
At the moment with Gueste2X_GoodBye-2.0 + gestekrnl 2.1 without oc, baseband 0725.
Did you try to switch mode? From "mass storage" to "mtp"?
amagyar said:
Did you try to switch mode? From "mass storage" to "mtp"?
Click to expand...
Click to collapse
No. How can i try this?
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
Can't enter into this menu usb-connection(pc) when i press menu button nothing happens.. I think we are in the same boat because my phone can't be recognized in apx mode/ sw mode ..
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
The same is happening with my p990 to. I can´t connect to pc with pc connection. To transfer data i use the card reader or with airdroid who it make with wifi.
Others users that had this problem they sent the phone in warranty and Lg have changed their mainboards. So if you have warranty go and solve your problem with your LG shop. It´s seems that is not any solution to solve this annoying problem with this bad hardware
Hello, same problem here. Well, "you need to send it to LG".. but there's one problem. I have MIUI and I can't flash back original ROM without nvflash. How to deal with it?
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
SuperSkill said:
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
Click to expand...
Click to collapse
well at mine don´t works. thank you very much for you solution.
I have the same problem. It's not possible to connect to the phone either by LG tool or as mass storage. I've tried different cables, computers and cleaning the connector in the phone without success. I'm running stock GB.
I would really like to root the phone to be able to flash CM10. Is there any way to do this without USB connection?
Edit: I've already tried NVFlash and SuperOneClick
I had the same problem last weeked and i manage to solve it, im busy right now but I promise i'll tell you how i solved it later today or tomorrow
Sent from my Optimus 2X using xda app-developers app
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Hey hello, I wrote yesterday and told you that I would teach you how to fix this bug, I'm almost done with the tutorial, I had to make all over again so I could tell you step by step, unfortunately, the fix I found is temporal, so, I'm trying one more thing to see if I can make it permanent, and also, i'm wating for Hulk to answer me where to post this fix, 'cuz you're not the only one with this problem, so I think would be better to create a thread with my solution, i'm sorry if I could not give you the instruccions today but I think later today or tomorrow hulk will tell me where to put it, as soon as I post the solution, I'll post here a link to the thread, just wait a bit more
greetings
I just posted my solution, you might want to give it a shot
Look here
http://forum.xda-developers.com/showthread.php?p=33870935#post33870935
Hi, guys! I have a really big problem :/. Right now I'm using the stock 2.3.4 gingerbread from LG ,but you all know that this is the worst OS ever. I wanted to get rid of it but i cant connect my device to the computer. It's only charging. I need a way to root it w/o usb connection. Do u have any suggestions? It's not a software problem! Something inside the phone is broken and i don't know what it is. Is there a way to root it via bluetooth or SD card? I didn't find any apps to root it too. I know gingerbreak etc, but they dont work for 2.3.4. Thank you in advance and i hope there is a solution. :fingers-crossed:
I am afraid you can't. Replacing your micro usb port could solve your problem. I reccomend to buy a micro usb port which is already on the flexible cable so you can avoid ironing.
Sent from my LG-P990 using xda app-developers app
So i'll need this? I asked a staff member in a service station and he said that the port isnt broken. So i need the whole thing port+flexible cable? Is that what i should do? Thanks alot. Ohh man i cant post links still: http:___//i.ebayimg.com/t/LG-G2X-Optimus-2X-P990-P999-Micro-USB-Charging-Port-Flex-Cable-Repair-Part-/00/s/OTU1WDE0MDI=/z/unUAAOxy9DRSAoTf/$T2eC16R,!wsE9suwycosBS!oTe7+VQ~~60_57.JPG
stupid question: did you try another usb cable or usb port?
Yeah, dude. Of course. I've tried different settings like usb debugging on/off too but still nothing.
here are some articles you might want to check out regarding usb connection
http://www.birdiesync.com/my-android-device-cannot-connect-over-usb
http://www.droidxforums.com/forum/chevyno1/31975-usb-charge-only-ssx.html (2nd post reply)
i forgot how the mass storage settings in gingerbread look like but there should be an option to put the phone in "charge only" mode (which you should disable)... pressing menu key in settings > storage doesn't give you any options to choose?
In gingerbread you can only turn usb mass storage and usb debugging on/off. These settings didn't help. I'll read more about the first link you gave me and try it out.
peetyo040497 said:
In gingerbread you can only turn usb mass storage and usb debugging on/off. These settings didn't help. I'll read more about the first link you gave me and try it out.
Click to expand...
Click to collapse
This is quite challenge, root without usb connection. First idea I got to use ADB over WiFi, but this is available from ICS, not on GB.
Second idea - what I remember, some of root methods use APK installation over ADB by script. Maybe you can search for these script methods and place all required files on SD Card. Then try to execute commands by terminal on device itself to install and root.
It's just my idea, maybe wrong, maybe help.
peetyo040497 said:
So i'll need this? I asked a staff member in a service station and he said that the port isnt broken. So i need the whole thing port+flexible cable? Is that what i should do? Thanks alot. Ohh man i cant post links still: http:___//i.ebayimg.com/t/LG-G2X-Optimus-2X-P990-P999-Micro-USB-Charging-Port-Flex-Cable-Repair-Part-/00/s/OTU1WDE0MDI=/z/unUAAOxy9DRSAoTf/$T2eC16R,!wsE9suwycosBS!oTe7+VQ~~60_57.JPG
Click to expand...
Click to collapse
Yes that is what you need if you have to replace your USB port but you don't have skills to replace only the usb port.
You can try gingerbreak to root your phone, but it maybe won't work.
bitdomo said:
Yes that is what you need if you have to replace your USB port but you don't have skills to replace only the usb port.
You can try gingerbreak to root your phone, but it maybe won't work.
Click to expand...
Click to collapse
Gingerbreak works on devices with android 2.3.3 and lower. Anyways I've tried it but it didn't work.
p.valenta said:
This is quite challenge, root without usb connection. First idea I got to use ADB over WiFi, but this is available from ICS, not on GB.
Second idea - what I remember, some of root methods use APK installation over ADB by script. Maybe you can search for these script methods and place all required files on SD Card. Then try to execute commands by terminal on device itself to install and root.
It's just my idea, maybe wrong, maybe help.
Click to expand...
Click to collapse
I'm not aware of ADB and scripting. Can you give me sоme guidelines?(I'm sorry 'bout my english. I hope you understand)
p.s. I found some info about ADB. So you need ADB to control your device via commands, but you can use ADB on your computer? You say that i have to find a way to use ADB on my phone so it controls itself and roots?
peetyo040497 said:
I'm not aware of ADB and scripting. Can you give me sоme guidelines?(I'm sorry 'bout my english. I hope you understand)
p.s. I found some info about ADB. So you need ADB to control your device via commands, but you can use ADB on your computer? You say that i have to find a way to use ADB on my phone so it controls itself and roots?
Click to expand...
Click to collapse
sorry to hear about your problems but just a simple question here have u tried another computer ? i had this problem with my nexus when i connect it to the pc i couldn't transfer my stuff to it but adb worked, but when i took it to another computer both mtp and adb worked
Yes, I've tried another pc's port and it didnt find my device too. My issue isn't the same i mean that my computer doesn' recognize the phone. There are no messeges that appear on the device or computer.
peetyo040497 said:
Yes, I've tried another pc's port and it didnt find my device too. My issue isn't the same i mean that my computer doesn' recognize the phone. There are no messeges that appear on the device or computer.
Click to expand...
Click to collapse
peetyo maybe your cable isn't good and did you try to install lg drivers?
check also by device manager or computer management or a device is appeared
Sent from my LG-P990 using xda app-developers app
winstonxl2 said:
peetyo maybe your cable isn't good and did you try to install lg drivers?
check also by device manager or computer management or a device is appeared
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Guys, the problem is not in the computer nor in the cable, it's in the phone. I'm 99% sure that it's a hardware problem. So i need to find a way to root or flash it without using usb connection.
i'm somehow sure that the real problem here is the device driver installation on your PC/Windows, not the phone...
btw which windows version are you using?
did you try checking out the AIO tool thread?
http://forum.xda-developers.com/showthread.php?t=2020737
60nine said:
i'm somehow sure that the real problem here is the device driver installation on your PC/Windows, not the phone...
btw which windows version are you using?
did you try checking out the AIO tool thread?
http://forum.xda-developers.com/showthread.php?t=2020737
Click to expand...
Click to collapse
Win 8 currently.
How would this thread help me?
I'll try installing the drivers on this laptop cause i''ve tried before on a one with xp.
P.s. With the drivers reinstalled on win 8 it doesnt work. As i said i've tried different computers, different cables and different setting.
peetyo040497 said:
Win 8 currently.
How would this thread help me?
I'll try installing the drivers on this laptop cause i''ve tried before on a one with xp.
P.s. With the drivers reinstalled on win 8 it doesnt work. As i said i've tried different computers, different cables and different setting.
Click to expand...
Click to collapse
if you read the 1st post, you might find out how could it help you... especially if you use win 8 which caused problems for many other users when trying to install the drivers or trying to flash the phone...
I - Install APX (NVFlash Recovery) Drivers if not already installed.
It starts the windows device driver wizard to help you install the drivers needed for NVFlash. It detects your system OS and gives additional on-screen instructions needed if your PC is running Windows 8.
FYI: The drivers are located under ToolKitFiles\nvflash\driver folder.
Click to expand...
Click to collapse
60nine said:
if you read the 1st post, you might find out how could it help you... especially if you use win 8 which caused problems for many other users when trying to install the drivers or trying to flash the phone...
Click to expand...
Click to collapse
I use windows 8 from a week. Anything i've done before was on a xp/ win 7. The problem isnt in the win 8 i use now. I've tried everything on my xp laptop. I have a friend who has the same phone and he can connect it to his computer so everything is fine with his computer. I've tried to connect my optimus to his computer and again it wasnt found by the computer. The problem must be in my device.
I'll try installing the APX drivers.
peetyo040497 said:
I use windows 8 from a week. Anything i've done before was on a xp/ win 7. The problem isnt in the win 8 i use now. I've tried everything on my xp laptop. I have a friend who has the same phone and he can connect it to his computer so everything is fine with his computer. I've tried to connect my optimus to his computer and again it wasnt found by the computer. The problem must be in my device.
I'll try installing the APX drivers.
Click to expand...
Click to collapse
u said that u wanted to get rid of the lg gingerbread software, and for that u dont really need to root, u could use the all in one toolkit and flash the new unlocked bootloader with cwm or twrp and install the new bootloader rom u want its as easy as that
i used cwm to wipe my phone but i did not flash it with rom instead i rebooted the phone & now it's stock on the Sony logo. please help this is not even my phone
i did try to use flashtool to flash stock tft but unknown sources & debugging must be enabled but the phone is stuck on the Sony logo so i can't even enable these settings. please if you can help then do,thanks very much
the phone's boot loader is locked by O2 & i had lollipop for LBL installed but it was getting very laggy so i tried to install another rom when i then messed up everything !!
1.Flashtool needs USB Debugging for Rooting ur Device, not Flashing
So don't worry about it, go for flashing
2.In Case u Wipe Entire Phone I.e.System, Data, Cache then the Phone won't skip the Boot Logo
According to me, the Recovery should b Accessible, So flash any ROM present in the Storage (if its urgent for u to have the phone working)
OR
Use Flashtool, it will help you recovering ur Phone
Go for the Flash tool method, read the Procedure Carefully
Good Luck
Sent from my Xperia SP using Tapatalk
i managed to do it ,windows 10 64bit did not work so i booted to 2nd partition with win 7 32bit this also gave me lots of trouble for 2 hours but closing the flashtool app & disconnecting the phone few times & just as i was about to give up it's started to flash stock jellybean 4.1.2 & now the phone is working & currently the sony Companion app is updating it i think to 4.3 jelly bean. i will not mess no more with this phone,lollipop for LBL is a no go & because O2 locked the bootloader i will just keep it the way it is & just customise it with smart launcher & lock screen. thanks very much for your comment as it would have made me not give up & try again tomorrow. i appreciate it
agantai said:
i managed to do it ,windows 10 64bit did not work so i booted to 2nd partition with win 7 32bit this also gave me lots of trouble for 2 hours but closing the flashtool app & disconnecting the phone few times & just as i was about to give up it's started to flash stock jellybean 4.1.2 & now the phone is working & currently the sony Companion app is updating it i think to 4.3 jelly bean. i will not mess no more with this phone,lollipop for LBL is a no go & because O2 locked the bootloader i will just keep it the way it is & just customise it with smart launcher & lock screen. thanks very much for your comment as it would have made me not give up & try again tomorrow. i appreciate it
Click to expand...
Click to collapse
I assume that you have tried the RR (5.0.2) LBL Bug-Fixed by Skulltus, if not then give it a try since LBL Users are finding it somewhat stable...
Reasons why Phone wasn't getting detected can be:-
>Improper Downloading of File - Make sure you don't Pause and Resume the Downloads too many times, so that it becomes corrupt
>Wire-- Use a Sony USB Cable only or a Good one ( i use Samsung's Cable for the Timebeing) -- Improper wires can be a reason why the Phone can't get detected by The PC...
>Try Another USB Port to Connect the Phone if it doesn't get detected by one...
These things happened with me Many times, Just Sharing it
Happy Flashing :good:
Arvind7352 said:
I assume that you have tried the RR (5.0.2) LBL Bug-Fixed by Skulltus, if not then give it a try since LBL Users are finding it somewhat stable...
Reasons why Phone wasn't getting detected can be:-
>Improper Downloading of File - Make sure you don't Pause and Resume the Downloads too many times, so that it becomes corrupt
>Wire-- Use a Sony USB Cable only or a Good one ( i use Samsung's Cable for the Timebeing) -- Improper wires can be a reason why the Phone can't get detected by The PC...
>Try Another USB Port to Connect the Phone if it doesn't get detected by one...
These things happened with me Many times, Just Sharing it
Happy Flashing :good:
Click to expand...
Click to collapse
i have installed skultus bugfree 5.0.2 last night & it kept throwing a constant error (system UI crashed) i wasn't able to use the phone because this error when i hit ok it will comeback instantly so i thought it's not compatible,maybe i got the error because installation says ((1. Make you sure your device is LBL with .207 stock kernel, )) but my stock kernel is not 207 the firmware version ends with 205 , i have tried the sony companion to update but it said latest firmware is already installed. what do you think about this ?
agantai said:
i have installed skultus bugfree 5.0.2 last night & it kept throwing a constant error (system UI crashed) i wasn't able to use the phone because this error when i hit ok it will comeback instantly so i thought it's not compatible,maybe i got the error because installation says ((1. Make you sure your device is LBL with .207 stock kernel, )) but my stock kernel is not 207 the firmware version ends with 205 , i have tried the sony companion to update but it said latest firmware is already installed. what do you think about this ?
Click to expand...
Click to collapse
Go Back to .207 (By Flashtool) and then Re-Flash the ROM...
Sent from my Xperia SP using Tapatalk
Arvind7352 said:
Go Back to .207 (By Flashtool) and then Re-Flash the ROM...
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
where can i find .207 for locked bootloader O2 xperia sp ?
also is it a firmware upgrade or downgrade ? since i have .205 & .207 is higher !! sorry for the noob questions
agantai said:
where can i find .207 for locked bootloader O2 xperia sp ?
also is it a firmware upgrade or downgrade ? since i have .205 & .207 is higher !! sorry for the noob questions
Click to expand...
Click to collapse
IF
U want to Use the ROM then Download any .207 ROM, Flash it. I suggest you to download the AU(Australia ( .207 Build
Sent from my Xperia SP using Tapatalk
Arvind7352 said:
IF
U want to Use the ROM then Download any .207 ROM, Flash it. I suggest you to download the AU(Australia ( .207 Build
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
i already have this AU file ( C5303_12.1.A.1.207_AU )
do you know where i can get the recoveries for it & which version of UPDATE-SuperSU i need ? i have both v1.94 & v2.46
agantai said:
i already have this AU file ( C5303_12.1.A.1.207_AU )
do you know where i can get the recoveries for it & which version of UPDATE-SuperSU i need ? i have both v1.94 & v2.46
Click to expand...
Click to collapse
Looks like you are new to All these stuff
Just Explore the Device forum
Search for XZDualRecovery by NUT in Xperia SP Android Development Thread
I'll give the Links in few minutes
Sent from my Xperia SP using Tapatalk
Arvind7352 said:
Looks like you are new to All these stuff
Just Explore the Device forum
Search for XZDualRecovery by NUT in Xperia SP Android Development Thread
I'll give the Links in few minutes
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
thanks i really appreciate it & i look forward to those links. :good:
i know about rooting & flashing roms in zip format via recovery but yes i'm new to installing roms & kernels via the flashtool & not a big fan of it either.
Hey, I'm in pretty much the same situation here, except I am having a few problems which are keeping me from going back to the stock firmware.
1) The phone keeps restarting when it's in flashmode - meaning it's sitting there for 30 seconds or so with flashmode and the green light, and then disconnects and turns back on into flashmode. This is keeping me from being able to flash anything because the device disconnects through the process.
(Yes, I did try reinstalling the programs, updating drivers, restarting computer, using a different usb port/cable etc)
2) I did manage to make it stay connected somehow last night BUT flashtool would give me errors involving .sin's of some kind. I could get past all this by flashing the stock firmware using "repair my phone/tablet" in Sony PC Companion, which I have done twice before so I can confirm it works - but for some bizarre reason the software started saying that there is no firmware available for my device!
Please help!
2->If you have already flashed A Firmware via Flashtool and u want to perform another,
then you have to RESTART it (the App) Otherwise it will show
Unable to Flash "System.sin" as you said
1-->I guess Flash Mode has A Time limit to get connected with the PC, if not then definitely its the wire Problem...Wires should be in good condition
Sent from my Xperia SP using Tapatalk
Arvind7352 said:
2->If you have already flashed A Firmware via Flashtool and u want to perform another,
then you have to RESTART it (the App) Otherwise it will show
Unable to Flash "System.sin" as you said
1-->I guess Flash Mode has A Time limit to get connected with the PC, if not then definitely its the wire Problem...Wires should be in good condition
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
i have just finished installing the bugfree 5.0.2 rom from HERE ,hopefully everything works better & no more slow downs like this rom HERE
Arvind7352 said:
2->If you have already flashed A Firmware via Flashtool and u want to perform another,
then you have to RESTART it (the App) Otherwise it will show
Unable to Flash "System.sin" as you said
1-->I guess Flash Mode has A Time limit to get connected with the PC, if not then definitely its the wire Problem...Wires should be in good condition
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
ok i have big issue with this so called bugfree rom, i don't know how is this happening & i hope you will have an idea, when i install apps & games on the phone & then i reboot the phone for what ever reason half the apps & games will vanish from the phone !!! i also noticed that those games that vanished from the phone are installed on the SD card & the funny thing is when i look at the storage the SD card memory it remains the same size even after i have installed those games & apps on it !! for example i have 2.54gb of sd space remaining out of the 4gb card & when i finish installing the games & apps it remains 2.54gb & i can play the games it's only when i reboot the phone they no longer on the phone. what is happening here ?
agantai said:
ok i have big issue with this so called bugfree rom, i don't know how is this happening & i hope you will have an idea, when i install apps & games on the phone & then i reboot the phone for what ever reason half the apps & games will vanish from the phone !!! i also noticed that those games that vanished from the phone are installed on the SD card & the funny thing is when i look at the storage the SD card memory it remains the same size even after i have installed those games & apps on it !! for example i have 2.54gb of sd space remaining out of the 4gb card & when i finish installing the games & apps it remains 2.54gb & i can play the games it's only when i reboot the phone they no longer on the phone. what is happening here ?
Click to expand...
Click to collapse
I didn't try the LBL ROM since I Unlocked the Bootloader but still,
In All ROMs when I install an app from the SD Card, they get vanished on rebooting.... It reads the SD Card and the App Appears
I guess there's a "Move to Phone" Option in it, try doing that for those apps installed in SD Card
There should be an Option of-
"Preferred Install Location" either in
--Settings->Apps(Select the Menu)>Preferred Install Location
OR
--Settings->Storage->Preferred Install Location
Default Option can be "Let the System Decide"
Change it to Internal Storage
Tapatalked from my XSP™
Arvind7352 said:
I didn't try the LBL ROM since I Unlocked the Bootloader but still,
In All ROMs when I install an app from the SD Card, they get vanished on rebooting.... It reads the SD Card and the App Appears
I guess there's a "Move to Phone" Option in it, try doing that for those apps installed in SD Card
There should be an Option of-
"Preferred Install Location" either in
--Settings->Apps(Select the Menu)>Preferred Install Location
OR
--Settings->Storage->Preferred Install Location
Default Option can be "Let the System Decide"
Change it to Internal Storage
Tapatalked from my XSP™
Click to expand...
Click to collapse
ok but this means all apps will be installed to the internal memory & one of the reasons why i wanted lollipop is the ability to install some apps to SD . i just need to fix this write to SD issue & i will be good to go.
agantai said:
ok but this means all apps will be installed to the internal memory & one of the reasons why i wanted lollipop is the ability to install some apps to SD . i just need to fix this write to SD issue & i will be good to go.
Click to expand...
Click to collapse
Oh Yeah....
I guess App2SD Implementation is not working properly in 5.0.2 so you are facing the problem
Tapatalked from my XSP™
Arvind7352 said:
Oh Yeah....
I guess App2SD Implementation is not working properly in 5.0.2 so you are facing the problem
Tapatalked from my XSP™
Click to expand...
Click to collapse
do you mean i wont be able to use the SD to install apps !! i have installed an app to the internal memory & when i moved it to the SD card the settings says it's moved correctly but the SD card memory size still unchanged which means it didn't move correctly & if i try to start the app the phone will freeze & if i restart the phone the app will disappear !!
agantai said:
do you mean i wont be able to use the SD to install apps !! i have installed an app to the internal memory & when i moved it to the SD card the settings says it's moved correctly but the SD card memory size still unchanged which means it didn't move correctly & if i try to start the app the phone will freeze & if i restart the phone the app will disappear !!
Click to expand...
Click to collapse
That's what I meant in the last post.....
Its not working
Tapatalked from my XSP™
Hi guys,
I just broke my phone's screen & digitizer, it's all black except for a few lines at the top of the screen, and I've used screenshots (viewed on windows) to verify touch is doomed as well.
I need to enable usb debugging to mirror the phone to windows, but I'm unfortunately not in any town area for a few days to buy and try a otg cable with mouse. I think there's a way to enable usb debug through abd, but I'm no expert on this, please help...
My phone's bootloader is unlocked, it's rooted, TWRP, can't remember exactly if it's on 4.4.2 or 4.4.4.
I know adb works with it, but I haven't use adb since 2 or 3 years back.
I can copy photos, videos, and audio recs through windows, but there are contacts and certain app data with my notes which I don't know how to retrieve / can't find through windows.
Can anyone help me out? Much appreciated if you could give step by step guide.
Thanks in advance....
adb needs usb debugging enabled, that's why its called Android Debugging Bridge.
Not much you can do, unless you van somehow navigate to developer options and tick the option + confirmation dialog.
Anyway, maybe someone else got a better idea
thanks liveroy, i'll try to get a otg cable later
Pretty much you can do if you have unlock bootloader, flashing twrp will give you adb by default.. Many more things you can do in fast boot
cilix said:
thanks liveroy, i'll try to get a otg cable later
Click to expand...
Click to collapse
Salik, thanks for informing, but unfortunately, my phone's battery is out and it doesn't seem to charge anymore. So, I'm now just patiently waiting for my X Play to arrive, and give it more protection At least it comforts me when I can't get back my two years worth of notes :silly:
Salik Iqbal said:
Pretty much you can do if you have unlock bootloader, flashing twrp will give you adb by default.. Many more things you can do in fast boot
Click to expand...
Click to collapse
Hi,
I have a phone that work perfectly except the screen.
I would like to access the phone but all solution I found on internet need usb debbuging, but it's not on :/
My phone is a xperia z, with locked bootloader (and not unlockable since it's an operator version...).
I tried a lot of hours but can't arrive to get access to it, only thing I was able to do is to access fastboot mode or flashmode.
I seems to be able to flash tft file, so I was looking to a tft file with usb debbuging enable, but no luck :/
Someone can help me, or have a better idea maybe to solve my problem ?
Thank you very much in advance for the help guys !
PS : if it's not clear, my screen is broken but I would like to use it and control it using a remote app.