Related
My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.
lavorno said:
My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.
Click to expand...
Click to collapse
Do you have CWM installed?
tiskael said:
Do you have CWM installed?
Click to expand...
Click to collapse
no
lavorno said:
no
Click to expand...
Click to collapse
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?
tiskael said:
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?
The problem with your S4A is that it has a locked bootloader, so you can't flash firmware yourself, sorry!
Click to expand...
Click to collapse
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
If you don't want to go to Best Buy right away you can try flashing the firmware yourself.
http://forum.xda-developers.com/showthread.php?t=2629093
If you took the official OTA for 4.3, ML2, there is no known root exploit available. Odin is easy to flash with - there are 1 clicks that do all the hard work for you, all you have to do is put your phone into download mode and the app does the rest on your PC. Make sure you have the proper drivers installed. Best way I found was to download the software suite from Samsung for the phone. Without the proper drivers Odin won't see the phone (I found this out the hard way.)
lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.
lavorno said:
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.
Click to expand...
Click to collapse
No worries, I heard they were pretty good in the US. Remember though, you can't root it on 4.3 (yet). If they've set it back to 4.2.2 then you can root again and not update to 4.3. If they've set it to 4.3 then either you will have to follow @Devo7v's instruction to flash back or wait it out as a root method is currently being worked on.
Bricked SGH i537
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........
Shabnur said:
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........
Click to expand...
Click to collapse
What firmware were you originally on.
Devo7v said:
What firmware were you originally on.
Click to expand...
Click to collapse
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......
Shabnur said:
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......
Click to expand...
Click to collapse
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.
Devo7v said:
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.
Click to expand...
Click to collapse
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....
Shabnur said:
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....
Click to expand...
Click to collapse
The MD5 is sort of like the fingerprint for the file, so you need the MD5 of the file you downloaded to match the MD5 that was posted in the thread. Download WinMD5Sum from the website here. Under File Name load the ML2 Odin zip package that you downloaded. WinMD5Sum will generate the MD5 of the file you downloaded and you can compare that to the MD5 the uploader posted in the thread. If the MD5's match then that means you downloaded exactly what was posted. If the MD5's don't match exactly, then you have a corrupted download and need to download it again.
Story: I rooted my stock S4A a while back, decided I didn't like it and wanted to update to 4.4 anyway, so flashed I537UCUAMF1 (4.2.2) (stupidly not realizing that I couldn't do OTA updates once I did that).
Now trying to update to 4.3 and got the "system software not authorized" message when I flashed I537UCUBML2.
What do I do?
1979jb1979 said:
Story: I rooted my stock S4A a while back, decided I didn't like it and wanted to update to 4.4 anyway, so flashed I537UCUAMF1 (4.2.2) (stupidly not realizing that I couldn't do OTA updates once I did that).
Now trying to update to 4.3 and got the "system software not authorized" message when I flashed I537UCUBML2.
What do I do?
Click to expand...
Click to collapse
you flashing via odin using the correct tar files?
xAjCx said:
you flashing via odin using the correct tar files?
Click to expand...
Click to collapse
Yep, using Odin and the links on this page http://forum.xda-developers.com/showthread.php?t=2629093&nocache=1
Tried Mirror 1 first, gave me that message. Now I'm trying Mirror 3, going to see what happens...
1979jb1979 said:
Yep, using Odin and the links on this page http://forum.xda-developers.com/showthread.php?t=2629093&nocache=1
Tried Mirror 1 first, gave me that message. Now I'm trying Mirror 3, going to see what happens...
Click to expand...
Click to collapse
No luck, still gives me the message. Tried both Mirror 1 and Mirror 3 with different MD5's...
1979jb1979 said:
No luck, still gives me the message. Tried both Mirror 1 and Mirror 3 with different MD5's...
Click to expand...
Click to collapse
Are you sure you don't have a corrupted download? The MD5 of the file you download should match the MD5 for that file in the thread.
PS Questions should be posted in the Q&A section.
1979jb1979 said:
No luck, still gives me the message. Tried both Mirror 1 and Mirror 3 with different MD5's...
Click to expand...
Click to collapse
I think you're getting a bad dl as well cause mirror #3 is my DL and all you do is just extract the files from the zip folder and flash them.
The MD5 that you are getting wrong is probably because you are checking MD5 of the .7z file instead of each individual .tar file
If you are having trouble with the .7z file then here's a link to DL each .tar file directly (contains BL/AP/CSC/CP for ML2)
http://www.androidfilehost.com/?w=files&flid=13994
Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.
What method are you using to flash? Odin or safestrap? Do you have safestrap installed?
feelinfroggy23 said:
Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.
Click to expand...
Click to collapse
It might be the actual stock ROM (I didn't check that particular file you mentioned) but in general the stock ROM for this phone comes in four files which begin with the following:
AP, CP, CSC, BL
You can load those in their corresponding spots in Odin (BL in bootloader, and so on)
Or you can head over to sammobile and download the stock firmware, which is a Samsung Kies dump file. This is one giant tar ball ( like the one in the video) which you'll just load into the PDA section of Odin 3.09 and flash away.
When you're clicking on ODIN are you running it as Admin? Also see the guy in the video using a USB 2 cable.
yes i am running as admin. it only works when i only use pda. when i put in the bl and csc and cp is keeps failing. after if flashed the pda file the phone reboots and freezes on the samsung screen. should i try doing it one by one?
it wont work still failing. should i flash one by one?
I did but i cant load it. i only get to the samesung logo and it freezes. only thing i can get into is download mode and the stock recovery. is there a way to boot into safestrap when phone is off? im running out of ideas and ive tried to do it on different computers and cords.
it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys
feelinfroggy23 said:
it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys
Click to expand...
Click to collapse
Don't flash the bootloader and you should be fine
I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A
Waiting4MyAndroid said:
Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A
Click to expand...
Click to collapse
the download says thats for the gs4?
feelinfroggy23 said:
the download says thats for the gs4?
Click to expand...
Click to collapse
It is the right tar. I have used it many times to go back to stock after root.
Sent from my SAMSUNG-SM-G900A
Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App
feelinfroggy23 said:
I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Use the G900A_DOwngrade_to_NCE.tar from this link http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 and flash in the pda. that should fix your problem.
feelinfroggy23 said:
Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Download the G900A_Downgrade_to_NCE.rar. Unzip and you should get this file "G900A_Downgrade_to_NCE.tar.md5". Now Run Odin 3.09 as admin, and put your phone in download mode. In Odin click on the AP icon and point to the G900A_Downgrade_to_NCE.tar.md5. Wait until Odin finishes loading the file it takes some time. Plug usb cable to your phone while in download mode. Once Odin is ready click start. Wait until Odin is done. Your phone will reboot once the flash is done. Please Thank @muniz_ri for his hard work.
Yea. Prolly should have checked this forum before you went on the journey.
---------- Post added at 10:45 PM ---------- Previous post was at 09:56 PM ----------
Now, Instead of making sarcastic comments, I will provide some assistance. There is one thing left out of all of these tutes that took me a while to catch on to. As a result, my phone was doing the same thing.
When you follow the downgrade instructions, yes leave out the boot loader. Sometimes, the downgrade doesn't do the job properly, so you'll have to go to this thread, scroll to the very bottom post and you'll see a link for "G900A_NCE_Stock_Modem"
You will need to flash this along with the stock firmware. It should correct the boot issue. (Flash in PDA slot)
Furthermore, you will not be able to update via WiFi OTA. You'll have to download the official update files in .zip format.
Go to this thread for the " G900A_NCEtoNG3_OTA.zip" to update from NCE to NG3.
This next step is optional, but it won't hurt to try it. Go here and grab the stock NG3 modem and recovery. Flash each (one at a time) in the PDA slot.
My personal opinion of the 4.4.4 update is low. There are many issues with it. But if you're trying get the phone completely up to date then:
Go here for the final update.
You should now be set. Please thank @muniz_ri for his unrelenting dedication to helping others.
It is not my intention to be an ass, but you should begin with google, and then search entire AT&T forum before posting questions like this. Chances are, others have had the same problem, asked, and received a solution exactly like this.
Anyways, I hope I was able to guide you in the right direction...
Edit: It seems that both of the update zips are in the OA1 root guide thread.
P.S.
Your phone is from AT&T, right?
Hello! I have been searching the forums and google, but still a little confused on a few things and hoping you guys can help me out.
I have the stock AT&T Note 3 on Lollipop (N900AUCUEOC2) and I am wanting to root the device. From my understanding, I am needing to downgrade the baseband version via Odin, then root. I did come across this post in an older thread (I didn't want to resurrect an old thread):
Rooted i747 said:
You can't root OC1, but you can use Odin to downgrade to NC2 and root it. Odin v.3.10.6 http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613. Once you Odin back you can use Towel root or Kingo root (links are posted above your post). Then install Supersu https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and run it, install Busybox https://play.google.com/store/apps/details?id=stericson.busybox&hl=en open and install it, then Safestrap http://forum.xda-developers.com/devdb/project/dl/?id=7216. (You should make a backup once Safestrap is installed before you flash any Roms). Once you're done you can pick a Rom for your Note 3 http://forum.xda-developers.com/note-3-att/development Now you ever use Odin? http://www.samsungodindownload.com/odin-tutorial/ (The site only shows flashing the All-In-One file so you know). Use all 4 Odin files, N900AUCUCNC2 ODIN Files, BL https://www.androidfilehost.com/?fid=96042739161891602 AP https://www.androidfilehost.com/?fid=96042739161891890 CP https://www.androidfilehost.com/?fid=96042739161891603 CSC https://www.androidfilehost.com/?fid=96042739161891604
Click to expand...
Click to collapse
But, this was in response to a person with the baseband version of N900AUCUEOC1 while I am on N900AUCUEOC2. Can I follow these same instructions using the same 4 files he uploaded or will that brick my phone? Or, is there a different method you guys recommend to rooting my phone?
Many thanks!
mrpicklebottoms said:
Hello! I have been searching the forums and google, but still a little confused on a few things and hoping you guys can help me out.
I have the stock AT&T Note 3 on Lollipop (N900AUCUEOC2) and I am wanting to root the device. From my understanding, I am needing to downgrade the baseband version via Odin, then root. I did come across this post in an older thread (I didn't want to resurrect an old thread):
But, this was in response to a person with the baseband version of N900AUCUEOC1 while I am on N900AUCUEOC2. Can I follow these same instructions using the same 4 files he uploaded or will that brick my phone? Or, is there a different method you guys recommend to rooting my phone?
Many thanks!
Click to expand...
Click to collapse
As long as you use all four files, you won't have any problems.
Rooted i747 said:
As long as you use all four files, you won't have any problems.
Click to expand...
Click to collapse
Thanks for the quick response! I will be trying this shortly and let you know when it succeeds
Sorry for the double post, but it has successfully been rooted! I initially had a Korean popup in Odin upon plugging in my phone. Using a different PC resolved that issue. Other than that, zero issues. Greatly appreciate the help!
Will this method trip the knox counter? If I understand it properly I don't think it will, but I just want to verify.
groundslug said:
Will this method trip the knox counter? If I understand it properly I don't think it will, but I just want to verify.
Click to expand...
Click to collapse
No, will not trip Knox.
Rooted i747 said:
No, will not trip Knox.
Click to expand...
Click to collapse
I have a note 3 n900aucueoc2 try this but it fails. got all 4 files. any recommendation .
Phone in download mode?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Rooted i747 said:
Phone in download mode?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok i did not do that thanks going to try it
Im wanting to root my att note 3 on the oc2 firm ware but using heimdall if possible. I don't have access to a windows pc right now. Any way to do this. Heimdalls front end just does not have a gui much like odins at all. Tried jodin or what ever it wont work at all.
Could you tell me what do with Odin? Do I have to do anything after downloading it? And do I have to use Safe Strap if I'm not flashing any ROMs? Thanks :thumbup:
Rooted i747 said:
As long as you use all four files, you won't have any problems.
Click to expand...
Click to collapse
Where do you get the 4 files?
Darth Rache said:
Where do you get the 4 files?
Click to expand...
Click to collapse
From the first post where I was quoted from (pictured below). Each one has two letters in front of it so you know where it goes in Odin N900AUCUCNC2 ODIN Files, BL https://www.androidfilehost.com/?fid=96042739161891602 AP https://www.androidfilehost.com/?fid=96042739161891890 CP https://www.androidfilehost.com/?fid=96042739161891603 CSC https://www.androidfilehost.com/?fid=96042739161891604
[/COLOR]Also after I flash all 4 files in Odin what do I do next?
Sent from my Nexus 6 using Tapatalk
It failed in Odin mode and yes it was in boot loader mode. I'm on v0C2
Edit, the AP file failed to download all 2.1gb I'm re downloading the AP file that's why it failed.
Sent from my Nexus 6 using Tapatalk
Full ODIN stock ATT files.
Download one file, unzip to 4 files and unzip this 4 files to md5 format. Put in ODIN and flash.
I'm not responsible to what happens to your phone if you flash this files. Flash in this files it is your and only your responsibility.
AP_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship_meta.tar.rar
BL_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CP_G925AUCU6EQCF_CP6075908_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CSC_ATT_G925AATT6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
DOWNLOAD HERE - Status : Live
Link is up
that will solve lot of issues and answer lot of questions, thank you.
I wish I had this 3h ago.
vendo said:
that will solve lot of issues and answer lot of questions, thank you.
I wish I had this 3h ago.
Click to expand...
Click to collapse
It just pop up on servers some 30 min ago
Help.........!!!
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Does this require a phone to be on a specific version before flashing? Just want to be sure everything is good to go before moving forward.
**Edit** found answer by searching. (sorry to jump post heheh
ivan.evg said:
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Click to expand...
Click to collapse
Did you unzip all 4 files all the way to md5 ?
norbarb did it again!
norbarb said:
Full ODIN stock ATT files.
Download one file, unzip to 4 files and unzip this 4 files to md5 format. Put in ODIN and flash.
I'm not responsible to what happens to your phone if you flash this files. Flash in this files it is your and only your responsibility.
AP_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship_meta.tar.rar
BL_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CP_G925AUCU6EQCF_CP6075908_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CSC_ATT_G925AATT6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
DOWNLOAD HERE - Status : Live
Click to expand...
Click to collapse
Thanks for another great post, norbarb!, your contributions are highly appreciated!
New update QE1
New update "925AUCS6EQE1" with May security patch is on the way...
ivan.evg said:
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Click to expand...
Click to collapse
Now it´s working, I unzip all 4 files to md5, and then load the ROM successfully, but it stuck on black screen for about 30 min and never started, I had to go down to the previous version now with imei corrupt and now my cell phone no longer has signal, I do not know what went wrong or where I was wrong?
I flash this files in my g925aucu4dph5 phone, I will upgrade to nougat? What about ADB files? Do you have a video tutorial to this process?
just received my g925a 128GB version, currently has the build number LMY47X.G925AUCU3BOJ7, can i use Odin 3.10.6 and just flash this on it after zipping all 4 files down to md5? (bl, ap, cp, csc)??/
I'mgoing to assume it will not b rootabe after this? If so, to what firmware can i. should i update to so that I may root as flash some other ROM? What I really want to accomplish is just rid myself of all the AT&T bloat, as I do not use AT&T.......and would like to be a more newer version of android then 5.1.1
excuse of it seems nubish, but been using OnePlus One for 3 years now, and stumbled upon getting this phone on a great deal on getting this phone for $240.....so new to the samsung scene, but not to the rooting/bootloading unlocking flashing scene....
Also saw that another poster lost his storage flashing odin....something not cool on a 128gb device and another lost his imei....not cool either
Thanks for the update! Worked beautifully. Now waiting for may update.
Once you load these are we supposed to get updates from ATT? I ask b/c when I hit update it never finds anything and I don't have the most current OS I have the previous to current using these methods to update
has anybody done this without losing original storage or imei??? have a 128GB att edge and would not want this error to occur on mine...still in 5.1.1 build OJ7....
localization of 7.0 AT&T
Hi guys. Sorry for possible offtopic, but I have a guestion for people who upgraded to Android 7 on this device:
Is there any changes in localizations list? Can this phone switch to russian language?
ty
ropotun said:
Hi guys. Sorry for possible offtopic, but I have a guestion for people who upgraded to Android 7 on this device:
Is there any changes in localizations list? Can this phone switch to russian language?
ty
Click to expand...
Click to collapse
Yes you can
On Edge of Galaxy
Once you use these methods must I always? Rather then getting the it's update - my phone doesn't get current version and says I'm up to date .I'm on QCF.
36dbldz said:
Once you use these methods must I always? Rather then getting the it's update - my phone doesn't get current version and says I'm up to date .I'm on QCF.
Click to expand...
Click to collapse
Are you on AT&T network and using at&t sim card, are you in USA?
On Edge of Galaxy
norbarb said:
Are you on AT&T network and using at&t sim card, are you in USA?
On Edge of Galaxy
Click to expand...
Click to collapse
Do we need to be on a certain version before flashing this w/odin?
Sent from my SAMSUNG-SM-G925A using XDA-Developers Legacy app