Database Develop

[Q] Force close in recovery

my TWRP 2.3.2.1 from my S+ force closes after about 2 minutes. I've testet also with with cwm 6 and 5... still the same. Does anyone know how to fix this? thanks :fingers-crossed:

Really nobody? :/
Send From my iStone using xda-developers app

You're in recovery and a force closed message appears?
Sent from my GT-I9000

No, i guess its about phone restart after some time in recovery TWRP ver 2.3.x.x.
Had the same problem and i solve with flashing TWRP ver 2.2.1. Its fully stable for me.

hellios1 said:
No, i guess its about phone restart after some time in recovery TWRP ver 2.3.x.x.
Had the same problem and i solve with flashing TWRP ver 2.2.1. Its fully stable for me.
Click to expand...
Click to collapse
Hopefully that'll solve his problem.
Pozdrowienia!
Sent from my GT-I9000

Keeps rebooting to cwm after installing CM

Here is what I did with the phone:
- Flashed JVU via odin
- Flashed CF-Root with CWM via odin
- Wipe EVERYTHING
- Flashed semaphore kernel for 4.3 via CWM
- Rebooted to CWM
- Flashed CM 10.2 stable via CWM
- Flashed semaphore again
- Flashed gapps
And now the phone keeps rebooting to CWM everytime I power it on. It never goes to Android, it always boots to CWM. Any ideas?
Of course, i tried to flash CM / semaphore / gapps again but it keeps doing the same. Flashing only CM does not work either

same problem with my i9000 back year..U have lost you internal memory..it can work if u take you phone into download mode for 5 minutes and then start it it will work..
Sent from my GT-I9300 using xda app-developers app

[email protected] said:
same problem with my i9000 back year..U have lost you internal memory..it can work if u take you phone into download mode for 5 minutes and then start it it will work..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
What do you mean exactly? ;_;
By the way it seems to work after flashing a samsung stock ROM but it does the same everytime I try to install CM. And I have done it before, I don't understand this ;_; (I decided to start over again because I was having trouble to downgrade from 4.4)

Have you find a solution? I faced the same problem and after reading half of the day on this forum I managed to find a solution to go back to stock and restore the phone functionality. Now I only have to flash CWM/TWRP and start to flash custom ROMs again
Let me know if you still need help.

The correct procedure to come to any ROM is from GB>ICS>JB>KK. So make sure that you are following the correct procedure
Sent from my GT-I9000 using Tapatalk 2

roccatgaming said:
Have you find a solution? I faced the same problem and after reading half of the day on this forum I managed to find a solution to go back to stock and restore the phone functionality. Now I only have to flash CWM/TWRP and start to flash custom ROMs again
Let me know if you still need help.
Click to expand...
Click to collapse
Hi,
I have the same problem, device keeps rebooting.
I did a rooting through Odin 3 and I got the green box saying PASS and now the device keeps rebooting. how can i fix it. Looks like you did the fix on your device.
Can you please tell me step by step how to fix my device.
Your help would be appreciated
Thanks
FLDS

[Q] Wifi can't be switched on

After updating my I9305 to I9305XXUEML8, I am not able to switch on my wifi. Whenever I tried to turn it on, it will automically switches off by itself. Anyone can help please?

QUOTE=dontknowanything;49197331]After updating my I9305 to I9305XXUEML8, I am not able to
witch on my wifi. Whenever I tried to turn it on, it will automically switches off by itself. Anyone can help please?[/QUOTE]
This is for Singapore I have the same problem after flash I9305XXUEML8 and re flash then
I9305XXUEMKC and all ok

Issues with wifi try flashing boeffla kernel. Works for me.
Sent from my GT-I9305 using Tapatalk

Thank you for the suggestions. Will try it out

My wifi is working again with trifos suggestion of flashing I9305XXUEMKC.
Thank you

This is weird. I flashed I9305XXUEMKC from 4.1.2 and my Wi-Fi isn't enabling (it was working fine in 4.1.2). Can anybody please advise?
In particular, I flashed the version of France (tried twice, with data wipe). Could flashing a same I9305XXUEMKC from another country solve the issue? I thought it was the same changelist, hence the same build.
Edit: please correct me if I'm doing things wrong. I took the Poland system.img and compared it to the France system.img, same md5sum, that means it's the same build.
Any assistance would be very helpful!
Thank you.

WiFi is kernel.
Suggest you format via recovery system data cache and sdcard .
Boot to download mode and flash the stock rom for your phone .

JJEgan said:
WiFi is kernel.
Suggest you format via recovery system data cache and sdcard .
Boot to download mode and flash the stock rom for your phone .
Click to expand...
Click to collapse
Hi JJEgan,
I already tried reflashing the image twice; first time, without wiping data, second time with wiping data. Note that I used Mobile Odin in both cases.
In both cases, WiFi doesn't toggle on.

Check which bootloader version you have - if you don't see references to Knox in download mode, install Boeffla kernel or (not recommended if you want to root now or ever in the future) update your bootloader.
Sent from my GT-I9305 using xda app-developers app

.NetRolller 3D said:
Check which bootloader version you have - if you don't see references to Knox in download mode, install Boeffla kernel or (not recommended if you want to root now or ever in the future) update your bootloader.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Thanks. Installing Boeffla beta13 solved the problem (however, I have a huge battery drain, but that's another problem).

Marshmallow kernals

Are their currently any kernals which support marshmallow now? I installed emotions kernals but the wifi doesn't work and I do not know how to get back to stock kernel.
Thank you

hunter99507 said:
Are their currently any kernals which support marshmallow now? I installed emotions kernals but the wifi doesn't work and I do not know how to get back to stock kernel.
Thank you
Click to expand...
Click to collapse
try flashing dr.ketens data fix in recovery.

funtimez said:
try flashing dr.ketens data fix in recovery.
Click to expand...
Click to collapse
Using an N910t3 I flashed emotion MM rc25 , confirmed wifi didn't work, tried the data fix it put me in a bootloop, luckily I had made a complete backup in TWRP and restored it already, just want to warn anyone else before they try it.

You should keep A backup of the original the "boot" partition in twrp. In TWRP>Backup>select "boot" only. That keeps the stock kernel.
I haven't tested any alternative kernels personally.
I feel that the stock MM kernel is doing great.

MM works fine. I'm waiting for MM kernel
I had a few problems with Marshmallow but finally installed the latest PG2. My phone N910T boot looped and caused some problems but eventually I finally had a working 6.0.1 stock. I installed TWRP and SuperSU SYSTEMLESS and used the phone for 2 days.
I tried flashing Beastmode and Emotion kernels but neither worked and I was stuck in a boot loop. Eventually I tried to reinstall stock without a wipe as this always works and keeps my apps etc.
The stock said the md5 checksum was invalid even though it was the same file from 2 days earlier. To fix this I removed the file extension, preventing it from doing the MD5 check and attempted to install. It bricked my phone as the process appeared to stop at halfway and I aborted. I found modem and bootloader files for PG2 and took a shot at installing them. I got to another bootloop.
I tried the stock tarfile again and was a little more patient this time. The previous delay was only a few minutes long. It installed succesfully. I Installed TWRP with ODIN, followed by a systemless root in recovery mode.
I'm currently waiting for MM kernels. I hope my little adventure helps somebody else on their journey.

FungusTB said:
I had a few problems with Marshmallow but finally installed the latest PG2. My phone N910T boot looped and caused some problems but eventually I finally had a working 6.0.1 stock. I installed TWRP and SuperSU SYSTEMLESS and used the phone for 2 days.
I tried flashing Beastmode and Emotion kernels but neither worked and I was stuck in a boot loop. Eventually I tried to reinstall stock without a wipe as this always works and keeps my apps etc.
The stock said the md5 checksum was invalid even though it was the same file from 2 days earlier. To fix this I removed the file extension, preventing it from doing the MD5 check and attempted to install. It bricked my phone as the process appeared to stop at halfway and I aborted. I found modem and bootloader files for PG2 and took a shot at installing them. I got to another bootloop.
I tried the stock tarfile again and was a little more patient this time. The previous delay was only a few minutes long. It installed succesfully. I Installed TWRP with ODIN, followed by a systemless root in recovery mode.
I'm currently waiting for MM kernels. I hope my little adventure helps somebody else on their journey.
Click to expand...
Click to collapse
You're able to flash TWRP and root on stock PG2 for N910T?

thebestiam said:
You're able to flash TWRP and root on stock PG2 for N910T?
Click to expand...
Click to collapse
Yes it works. I'm experiencing battery drain through.

FungusTB said:
Yes it works. I'm experiencing battery drain through.
Click to expand...
Click to collapse
Doesn't it update the bootloader to PG2 from PE3 and it'll still work?
Sent from my GT-I9500 using XDA-Developers mobile app

thebestiam said:
Doesn't it update the bootloader to PG2 from PE3 and it'll still work?
Click to expand...
Click to collapse
I don't know. I've upgraded bootloader in the past without issues. There seems to be issues surrounding mismatched modems and bootloader recently.

FungusTB said:
I don't know. I've upgraded bootloader in the past without issues. There seems to be issues surrounding mismatched modems and bootloader recently.
Click to expand...
Click to collapse
Okay, thanks for the clear up
Sent from my SM-N910T using XDA-Developers mobile app

Help! GS6 freezes and capacitive touch led steady flashes!!!

Hello, I have this GS6 G920T i want to fix...
At first, It was on 5.1, it would work very ok for a while and then starts to freeze! I then flashed a MM Stock via ODIN.
Now, it would leave the screen light always ON and the capacitive touch light would keep flashing!
I rooted and flashed TWRP then flashed the XtreStoLite ROM and after flash, wouldnt boot... just freeze up at the SAMSUNG Galaxy S6/Powered by Android splashscreen!
What can i try to solve this issue?
Thanks!

its_Khal said:
Hello, I have this GS6 G920T i want to fix...
At first, It was on 5.1, it would work very ok for a while and then starts to freeze! I then flashed a MM Stock via ODIN.
Now, it would leave the screen light always ON and the capacitive touch light would keep flashing!
I rooted and flashed TWRP then flashed the XtreStoLite ROM and after flash, wouldnt boot... just freeze up at the SAMSUNG Galaxy S6/Powered by Android splashscreen!
What can i try to solve this issue?
Thanks!
Click to expand...
Click to collapse
Did you do a factory reset after using Odin?

The Sickness said:
Did you do a factory reset after using Odin?
Click to expand...
Click to collapse
Yes I did!

Well, did you have this issue on stock after Odin? If not, try a different rom.

Yes I had the issue after Odin... I have tried a different Custom Rom which didn't boot after successful flashing.
I'll try download another Rom and revert.
Sent from my SM-N930F using Tapatalk