Related
Hi everyone
I recently updated to B609 and (as expected) my phone was un-rooted.
I decided it would be better for me to just install a ROM instead of waiting for a new way to ROOT every time a new OTA comes out. (I have seen some very interesting ones that include Xposed)
This would be the first time i install a ROM on one of my phones but i do know how to use custom recovery's and i will always keep a copy of a backup close so i can flash back when something goes wrong.
A problem i have with starting all of this: I can't seem to find a way to unlock the Bootloader on my phone.
I have looked online but i always get links for older versions/other phones/German stuff.
Second problem: The recovery. As far as i understand, there is no working TWRP for EMUI3.0. BUT there should be a working CMW recovery. Should i go fot CMW?
Third problem: Which ROM? There are 3 that grabbed my attention. Se7en-Rom (But it seems like it hasn't been updated in a while), My-RoM (which seems the most interesting for me at the moment) and Miui (which i just found out about). Which should i go with or should i use another one? I can already say that i want my phone Rooted and Xposed is something i would love to have back (since i used to have it on my previous phone).
Any advice and help would be appreciated
JellyFox said:
Hi everyone
I recently updated to B609 and (as expected) my phone was un-rooted.
I decided it would be better for me to just install a ROM instead of waiting for a new way to ROOT every time a new OTA comes out. (I have seen some very interesting ones that include Xposed)
This would be the first time i install a ROM on one of my phones but i do know how to use custom recovery's and i will always keep a copy of a backup close so i can flash back when something goes wrong.
A problem i have with starting all of this: I can't seem to find a way to unlock the Bootloader on my phone.
I have looked online but i always get links for older versions/other phones/German stuff.
Second problem: The recovery. As far as i understand, there is no working TWRP for EMUI3.0. BUT there should be a working CMW recovery. Should i go fot CMW?
Third problem: Which ROM? There are 3 that grabbed my attention. Se7en-Rom (But it seems like it hasn't been updated in a while), My-RoM (which seems the most interesting for me at the moment) and Miui (which i just found out about). Which should i go with or should i use another one? I can already say that i want my phone Rooted and Xposed is something i would love to have back (since i used to have it on my previous phone).
Any advice and help would be appreciated
Click to expand...
Click to collapse
I have a P7-L10 with B609. I was able to successfully root it with RootGenius. When you root it, the bootloader is unlocked at the same time. As far as I can tell, the root is 100%. As for CWM, you can get it from here:
http://forum.xda-developers.com/ascend-p7/development/mods-tweaks-kernels-recoverys-emui-2-3-t2966670
TWRP doesn't work with B609/emui3.0.
My L10 has faulty flash memory and won't accept a custom recovery, so I can't test CWM or any custom ROMs. Perhaps others can advise. Good luck!
arthios said:
I have a P7-L10 with B609. I was able to successfully root it with RootGenius. When you root it, the bootloader is unlocked at the same time. As far as I can tell, the root is 100%. As for CWM, you can get it from here:
http://forum.xda-developers.com/ascend-p7/development/mods-tweaks-kernels-recoverys-emui-2-3-t2966670
TWRP doesn't work with B609/emui3.0.
My L10 has faulty flash memory and won't accept a custom recovery, so I can't test CWM or any custom ROMs. Perhaps others can advise. Good luck!
Click to expand...
Click to collapse
RootGenius was the first thing i tried. It went up to 66% then i got an error but that was a fully Chinese version.
I just tried it again with the one i found by using Google and it goes up to 72%, then tells me that the root has failed.
Which version did you use?
This is what I used and it worked fine (root genius): http://forum.xda-developers.com/showthread.php?t=2789337
As for bootloader, as far as I know from, starting with firmware 133 (Emui 2.3) all devices have unlocked bootloader
CWM is the only custom recovery for the moment;
Did not try any custom ROM (I'm happy with stock ROM for the moment).
Cheers
ibeqa said:
This is what I used and it worked fine (root genius): http://forum.xda-developers.com/showthread.php?t=2789337
As for bootloader, as far as I know from, starting with firmware 133 (Emui 2.3) all devices have unlocked bootloader
CWM is the only custom recovery for the moment;
Did not try any custom ROM (I'm happy with stock ROM for the moment).
Cheers
Click to expand...
Click to collapse
That's the first one i tried out. The first few times it ended in an Error. I tried it again today and when my phone reboots during the process, RootGenius loses contact with my phone.
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
JellyFox said:
That's the first one i tried out. The first few times it ended in an Error. I tried it again today and when my phone reboots during the process, RootGenius loses contact with my phone.
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
Click to expand...
Click to collapse
Hmmm, strange problem. Assuming you have the latest version of HiSuite installed and your drivers are current, all I can suggest is trying again with RootGenius (I used version 1.8.7) with your firewall and antivirus disabled or perhaps trying with Vroot. If you do decide to try Vroot it probably won't work unless you disable your firewall and antivirus.
arthios said:
Hmmm, strange problem. Assuming you have the latest version of HiSuite installed and your drivers are current, all I can suggest is trying again with RootGenius (I used version 1.8.7) with your firewall and antivirus disabled or perhaps trying with Vroot. If you do decide to try Vroot it probably won't work unless you disable your firewall and antivirus.
Click to expand...
Click to collapse
I disabled my firewall and antivirus and gave RootGenius another try. Normally it goes up to 71% and gives me the error. Now it went to 71%, rebooted and then it gave me the error. The weird part is that right before i get the error, it says the installation is complete.
Moved on to Vroot (which is called Iroot now apparently) . It took a while longer but it wasn't able to do it either.
JellyFox said:
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
Click to expand...
Click to collapse
Get in bootloader mode, if your bootloader is unlocked, it will be written and highlighted with red color. I will point out again, starting with firmware B133 (Emui 2.3) all bootloaders for L10 version (I don't know for Chinese versions) are unlocked
Cheers.
update to b615 and flash or just flash this >> http://forum.xda-developers.com/ascend-p7/development/b615-unlocked-boot-img-t3050926 and use rootgenius remove inmutable etc...
btw there is twrp for emui 3 which mostly work fine http://forum.xda-developers.com/showpost.php?p=59340975&postcount=208
Z!L0G80 said:
update to b615 and flash or just flash this >> http://forum.xda-developers.com/ascend-p7/development/b615-unlocked-boot-img-t3050926 and use rootgenius remove inmutable etc...
btw there is twrp for emui 3 which mostly work fine http://forum.xda-developers.com/showpost.php?p=59340975&postcount=208
Click to expand...
Click to collapse
I still didn't get the OTA for B615 yet but thank you for the recovery.
ibeqa said:
Get in bootloader mode, if your bootloader is unlocked, it will be written and highlighted with red color. I will point out again, starting with firmware B133 (Emui 2.3) all bootloaders for L10 version (I don't know for Chinese versions) are unlocked
Cheers.
Click to expand...
Click to collapse
You were right! (not that i every doubted you). I found the problem i had: For some reason, i couldn't boot in bootloader trough my phone BUT i was able to do it with 'adb reboot bootloader'. After making some idiotic mistakes and having to re-flash the stock ROM, I finally was able to install My-RoM v3.3, its rooted, i have Xposed so i am happy
So thank everyone for the help!
After I updated my sisters phone to EMUI 3.1 (android 5.1.1) the phone became pretty much unusable. Even after reinstalling all apps or a factory reset, apps keep crashing. E.g. facebook loads up and is usable but just freezes after a few seconds and then crashes. Already contacted Huawei but no luck. Does anyone have tips, or should we just wait for the next update to patch things up? Thanx in advance
matje103
It happened the same to me! Nothing is working right now. Google chrome, the alarm, facebook, youtube, everything crashes! I made a hard reset and installed the apps again but nothing to do!
How can I fix the problem and have my beautiful phone back?
Shame on Android 5, I want go back to Android 4.4.2!
Please help!
Marco
Factory reset and don't install facebook app.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Guys, i have the same probçem with my p7. Everything worked propperly before the update D:
I looked everywhere but nobody seem to have an answer, i think we will have to wait till the next update
Same for me
Same problem for me, after the update, Google Play Services threw an error, I cleaned that apps cache and performed a reboot, after which that problem seemed to be solved. However some apps (especially the facebook one), just freezes when scrolling through the app
Hopefully this can be resolved quickly, as the phone was operating just fine before the update.
i have the same problem after 5.1.1 update.
the phone crashes all the time..
any sugestions?
Same problem here. After update several apps freeze while using. Especially facebook, alarm (clock) and the speach messages on WhatsApp. We have tried wiping the cage and factory reset already. Device is not rooted and runs stock firmware, update was ota.
I have that problems too, please help.
Even before crashing, fb videos doesnt load...
I tried wipe partition reset, which seems it has wirked on note 4, but for ne it hasn t worked
Same problem here... all apps get frozen after a few seconds (Facebook, Instagram, Snapchat...) and even the alarm or internal apps are not working well. When do you think it will arrive a new update?
I hope they will release a new update or patch soon. My girlfriend's smartphone is quite useless now.
Same problem here!
Well my phone is not crashing, tho it did just a few times maybe in 2 weeks. Nothing too serious. But it is a little bit buggy, and kinda slow. Hope they fix all this
Matje103 said:
After I updated my sisters phone to EMUI 3.1 (android 5.1.1) the phone became pretty much unusable. Even after reinstalling all apps or a factory reset, apps keep crashing. E.g. facebook loads up and is usable but just freezes after a few seconds and then crashes. Already contacted Huawei but no luck. Does anyone have tips, or should we just wait for the next update to patch things up? Thanx in advance
matje103
Click to expand...
Click to collapse
I have the same problem. Somebody in XDA is helping me to fix it. I don't know if is possible but I'll paste the chat with the instructions in here. I'm about to start the process, maybe it helps you.
Quote:
Originally Posted by RafaB
Hi guys, I upgraded my Huawei P7 to B832 and Emui 3.1 but I can root it. Can I do this procedure to install the version B805 and try to get it rooted?
-When i installed this version, i couldn't change theme, I hadn't keyboard installed, there wasn't application updater. It is the same for you?
-Yes. It's the same. How did you fixed it? I really appreciate your help!
Nothing, i did a force update to B800 and then to B621 because miss the app updater. Now i'm on 830 and still waiting a real stable beta..
-Sorry but I'm learning about this Android world. Can you tell me how did you do this force update to B800, please?
Force update is a different way to start the update. So, download B800, extract the update.app file on PC (no on file manager of the phone because then don't work), after that create a folder called "dload" and put the UPDATE.APP file here. Turn off your phone and press vol+, vol- and power buttons all together, in this way will start the process of upgrade( or downgrade like this). before restart of phone the dload folder with update.app inside has to be put on the root of the sdcard or the internal storage..
RafaB said:
I have the same problem. Somebody in XDA is helping me to fix it. I don't know if is possible but I'll paste the chat with the instructions in here. I'm about to start the process, maybe it helps you.
Quote:
Originally Posted by RafaB
Hi guys, I upgraded my Huawei P7 to B832 and Emui 3.1 but I can root it. Can I do this procedure to install the version B805 and try to get it rooted?
-When i installed this version, i couldn't change theme, I hadn't keyboard installed, there wasn't application updater. It is the same for you?
-Yes. It's the same. How did you fixed it? I really appreciate your help!
Nothing, i did a force update to B800 and then to B621 because miss the app updater. Now i'm on 830 and still waiting a real stable beta..
-Sorry but I'm learning about this Android world. Can you tell me how did you do this force update to B800, please?
Force update is a different way to start the update. So, download B800, extract the update.app file on PC (no on file manager of the phone because then don't work), after that create a folder called "dload" and put the UPDATE.APP file here. Turn off your phone and press vol+, vol- and power buttons all together, in this way will start the process of upgrade( or downgrade like this). before restart of phone the dload folder with update.app inside has to be put on the root of the sdcard or the internal storage..
Click to expand...
Click to collapse
Sounds interesting! Were you successful with this instructions? Has the phone to be rootet? Where did you get the b800 file? And which Android version did you have in the end? I'm a little confused because you mentioned B805, B800 and B621...
the steve said:
Sounds interesting! Were you successful with this instructions? Has the phone to be rootet? Where did you get the b800 file? And which Android version did you have in the end? I'm a little confused because you mentioned B805, B800 and B621...
Click to expand...
Click to collapse
Unfortunately I couldn´t "downgrade" the EMUI version from 3.1, but I could change from B832 to B830. Still can't get root access. For now, I'm gonna try this version and if I find something wrong, I'll try to change to B800 (as transitional rom) and go back to B621, as the instructions above.
RafaB said:
Unfortunately I couldn´t "downgrade" the EMUI version from 3.1, but I could change from B832 to B830. Still can't get root access. For now, I'm gonna try this version and if I find something wrong, I'll try to change to B800 (as transitional rom) and go back to B621, as the instructions above.
Click to expand...
Click to collapse
OK, I don't want to root the phone or install a custom recovery, because my girlfriend doesn't want to void her warranty. I'm just looking for a way to reverse the last update and get back to the stock android version before, because with the last update she got lots of problems with her phone.
Deinstall facebook app, use facebook in browser that will fix the crashes
MrBreadMan said:
Deinstall facebook app, use facebook in browser that will fix the crashes
Click to expand...
Click to collapse
Meh... not very helpful. It is not just facebook, also other apps have problems. It is no solution not to use any apps anymore.
the steve said:
Meh... not very helpful. It is not just facebook, also other apps have problems. It is no solution not to use any apps anymore.
Click to expand...
Click to collapse
My wife's phone after upgrade to B830 has some problems but the one most critical is with the audio service.
If you turn off sound, vibro or total silence, sound does not work at all, even after you turn it back on.
When you enter ringtone choosing settings you can't get out, phone stucks, you can't go to alarm clock, also - you are stuck here, nothing works, you can't change alarm time etc...
Phone calls make no sound, just vibro. Only way to get out of this is to reboot a phone.
Can i fix it without doing full factory reset?
Hi guys, I am only a very junior user who randomly flash his phone but most of the time I want my phone to be stable for work. I have had the situation since the recent OTA available, suffered a lot, would like to seek any help or advice.
I have a L09C635B361, Japan version. I updated to Android 7 via OTA, then unlocked / rooted under the instructions in this forum, forgot which exact thread though. Never thought of flashing any customized rom so I haven't realized the update problem until the recent OTA update (from B361 to B382) released. I got the push, downloaded B382 OTA package, restart to TWRP, then the flash was failed in TWRP screen. Restart again, the system notified there was a recent update failure. Then I installed Firmware Finder, downloaded the 3 update zip files, restart back to TWRP, still failed installing. Please refer to the failure screenshot for detailed reson. I have no idea what it said and how I should do differently.
No other way to go, I backed up my system, then wiped my phone, reset to factory mode, but brand new system was very strange: only voice input, no keyboard, missing several key functions such as camera. So I have to restore to my previous system, everything worked well except I can't open "clock".
Right now I am looking at system notification of B382 all the time, but I can't figure out how to get it updated, I don't mind if there's a way enables me go back to stock rom, but it's really hard to find the stock firmware for C635......
Thanks, appreciate your help in advance.
Hey man, try follow this guide to debrand your phone (get onto C432). It will probably unroot you and get you back to stock firmware as well.
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
Might want to check around first though, I dont want you bricking your phone on my account.
Good luck
xMrTROLLIPOPx said:
Hey man, try follow this guide to debrand your phone (get onto C432). It will probably unroot you and get you back to stock firmware as well.
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
Might want to check around first though, I dont want you bricking your phone on my account.
Good luck
Click to expand...
Click to collapse
Thanks bro. I will try the entire process when I have a backup phone.
One more thing is when I first tried to wipe phone, failed for several times. Plus the TWRP flashing error, I have suspect that there's something wrong with my partition information or format error. Can anyone help me to eliminate the possibility by the screenshot please?
On the other hand, I found 3 zip files on Firmware for same version update. Which one should I flash? If I need to flash all of the 3, is there a sequence?
The screenshot for the 3 zip files.
oushouseki said:
The screenshot for the 3 zip files.
Click to expand...
Click to collapse
You flash those in the order they appear. Except the last one, don't flash that (I think). From what I know it's always been update.zip and then update_hw.zip.
I see you're going to flash hw_jp which is the Japanese cust, so ignore the advice above about debranding to c432 as that's essentially the same thing as what you are about to do with those files. (C432 is the European version, which is called update_hw_eu.zip)
Also the voice input only bug is well known. You need to rollback to marshmallow (I forget which firmware but there's a thread on it here somewhere) and then OTA back to nougat and it should fix it.
lostunsunghero said:
You flash those in the order they appear. Except the last one, don't flash that (I think). From what I know it's always been update.zip and then update_hw.zip.
I see you're going to flash hw_jp which is the Japanese cust, so ignore the advice above about debranding to c432 as that's essentially the same thing as what you are about to do with those files. (C432 is the European version, which is called update_hw_eu.zip)
Also the voice input only bug is well known. You need to rollback to marshmallow (I forget which firmware but there's a thread on it here somewhere) and then OTA back to nougat and it should fix it.
Click to expand...
Click to collapse
Well, it ended up with paying 20USD to some "pro"s on taobao.com to unbrick my P9...sigh...am I too old to do this :crying:
I'm on EVA-L09C09 and would like to go to L09C432 so I can use the RROS ROM. Is it possible to debrand it without downgrading to 6.x? (I have an unlocked bootloader)
Thank you!
I was with a situation very similar and did it.
I was on EVA-L09C02B345 and debranded to EVA-L09C432B383 to test OTA Updates and received the EVA-L09C432B386 correctly via System Update and applied it successfully.
The process was not very clean I was with the same problem all tutorials are for android 6.x and none for 7.x, but I risked to follow this one:
https://forum.xda-developers.com/p9/how-to/vdo-guide-how-to-debrand-huawei-phone-t3410045
Of course before, I unlocked bootloader, installed TWRP and rooted, with help of latest topics about the subject, but you already have this.
Now, the problem on that tutorial was after applying the oeminfo and custombin of C432 the phone needs reboot and it was supposed to reboot and do some more actions on the system but when you reboot it enters in a bootloop that sent me to erecovery... At this point I had another problem, because after this I tried to put with dload an original C02 rom and give up, but the original rom on FF available for C02 was from a test branch(I didn't kown) and it didn't have updates and some other things, at this point I din't have updates to receive the latest C02 rom and had to try again for the C432 so I unlocked again and put TWRP and as a desperate measure I installed via TWRP the zip files of C432B383 and despite my beliefs it didn't gave any error, after reboot It booted correctly and phone info was already EVA-L09C432B383 and all working. At fist the OTA update to B386 didn't apear but after a factory data reset it appeared right after initial setup and wifi configuration, downloaded full update and applied successfully.
This was my story, after this I am with the idea that after the problem of oeminfo and custombin I should have gone to TWRP and flash the C432 rom and everything would be ok but I'm not sure if the "test" rom influenced anything on the process...
Hope it helps...
So did it go out of the bootloop after re-unlocking?
WhatWhatInTheRoot said:
So did it go out of the bootloop after re-unlocking?
Click to expand...
Click to collapse
After re-unlock I didn't followed the tutorial I just unlocked bootloader then installed TWRP and on TWRP installed the zip files of the EVA-L09C432B383 firmware.
I assume that the oeminfo and custombin from the tutorial was still in place because I ended up with a L09C432 and not with a crossflashed L09B900, so probably you can't skip the bootloop, but I'm not sure I'm no expert I just risked and got lucky I guess!
It would be nice If someone who really understand this procedure, to tell us what's the appropriate procedure to do this without problems and bootloops...
If you're willing to risk my recipe is this:
1 - unlock bootloader (you already have this)
2 - install twrp (https://forum.xda-developers.com/p9/development/twrp-t3565703)
3 - root (https://forum.xda-developers.com/p9/development/root-supersu-2-81-emui-5-t3612258)
4 - follow tutorial until reboot after apply C432 oeminfo and custombin (https://forum.xda-developers.com/p9/how-to/vdo-guide-how-to-debrand-huawei-phone-t3410045)
5 - when the phone boot to e-recovery, don't do anything just reboot it to TWRP
6 - on TWRP install the zip files of EVA-L09C432B386 previously saved on the sdcard
If step 5 and 6 fail try to flash the EVA-L09C432B386 via dload folder on sdcard. If this fails too I don't really know what I did more to solve the problem because at that point I was a bit scared and trying everything...
Don't forget before you do anything make sure you have your original firmware available don't do like me that only had a old test keys firmware available, and do a full nandroid backup on TWRP so you have more options to revert back!!!
Probably it's best to way for a more expert opinion/tutorial...
Thanks, but sounds way too risky, I think I'll wait for a more proper method.
Sorry for bumping, but has anyone found out a solution?
I and mfPPC can't be the only ones with this problem, surely. :/
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
SideSkroll said:
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
Click to expand...
Click to collapse
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
zgfg said:
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
Click to expand...
Click to collapse
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
SideSkroll said:
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
Click to expand...
Click to collapse
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
zgfg said:
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
Click to expand...
Click to collapse
Thank you. Thats exactly what I was looking for. I really appreciateyour help.
Btw, no one should have the "hide extensions for known file types" checkbox marked...
Edit: Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
SideSkroll said:
....Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
Click to expand...
Click to collapse
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
SideSkroll said:
Thats exactly what I was looking for...
Click to expand...
Click to collapse
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
zgfg said:
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
Click to expand...
Click to collapse
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
SideSkroll said:
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
Click to expand...
Click to collapse
This small OTA bringing Patch02 over b540 installs even over TWRP (but that was not the case for OTA from eg b535 to b540)
Cannot discuss/compare battery for Omni Pie, since not using Omni
Problem with Camera app does not show on stock Oreo. Even if the app was somehow ported from Huawei, there are maybe problems with integration to Omni.
Various Huawei/Mate models come with different cameras, but there is only one OK Omni ROM (with one Camera app) given to work on all Huawei/Mate models
Btw, somebody else also complained about issues with Camera (and GPS) and decided to go back to stock Oreo.
Similarly, issues you described about black notifications or so must be related to the custom ROM, theme or so.
As a general rule:
- for installing OK ROM, you flash System partition, and nothing else
- you also wipe Data partitiom (containing all your installed apps, incl Magisk Manager, also containing your user settings)
It does not affect any other partition.
Therefore, changes given by NW patch persist - without, you will have (also in that OK ROMs) problems with SIM card(s) and connecting to the network
Also, Magisk, which was flashed to Ramdisk, persists. You must only install Magisk Manager again, because it is user apo, installed to Data partition that was wiped
You must check on the OK side how they advice installing the updates of OK ROMs
(It is questionable if they will get updates any more, since OK team switched to development of ROMs which install over the stock Pie, whereas on P9 you have no stock Pie - only Oreo, and most likely, we will never see stock Pie for P9.
Just check when OK team released last ROM for stock Oreo, and compare with their releases of OK ROMs for stock Pie:
https://openkirin.net/download/
Hence IMO, for updating the OK ROM (if/when it comes), you will again just need to flash its System and to wipe Data (and then to reinstall user apps like Magisk Manager).
Hopefully, you can backup and restore some apps and settings by Titanium.
Whether you don't need to wipe Data for such update - check from the OK support.
On the Open Kirin site you will find Support pages (Faq, HowTo) and also a link to the live Telegram channel