Hi,
So I flashed Leaked MIUI 7 MM on Mi4 extended partition via TWRP 2.8.7.0 After successful flashing. I reboot phone just went off Display never turned on after that but at that time my device was being detected my PC as QHUSUB_BULK. Now nothing happens when I connect it to PC
If nothing works the last option is to wait for battery to get drained completely, which should get back ur fastboot probably (?)
Me_Ashish_ said:
If nothing works the last option is to wait for battery to get drained completely, which should get back ur fastboot probably (?)
Click to expand...
Click to collapse
Hi i managed to Fix it :good:
mm brick
Prince Chandela said:
Hi i managed it Fix it :good:
Click to expand...
Click to collapse
As I'm facing the same issue, how did you fix it?
Thanks a lot :crying:
knoxwalles said:
As I'm facing the same issue, how did you fix it?
Thanks a lot :crying:
Click to expand...
Click to collapse
push power+(volume-) keys at less 2 minutes, when the PC detect it as QHUSUB_BULK, install the "Qualcomm_QHSUSB 9008" driver, the "QHUSUB_BULK" should changed to "Qualcomm_QHSUSB 9008" , then use Miflash, flash the stable or develope package for Mi4, It should work again.
knoxwalles said:
As I'm facing the same issue, how did you fix it?
Thanks a lot :crying:
Click to expand...
Click to collapse
wky750 said:
push power+(volume-) keys at less 2 minutes, when the PC detect it as QHUSUB_BULK, install the "Qualcomm_QHSUSB 9008" driver, the "QHUSUB_BULK" should changed to "Qualcomm_QHSUSB 9008" , then use Miflash, flash the stable or develope package for Mi4, It should work again.
Click to expand...
Click to collapse
+1
If this doesn't work try to disconnect you battery and reconnect it or wait till the battery gets empty by itself (24+ Hrs)
I have posted the soln for this prob in dat Mi3 marshmallow thread .. Check it out..
thanks for the help, very much appreciated
Prince Chandela said:
Hi i managed to Fix it :good:
Click to expand...
Click to collapse
wky750 said:
push power+(volume-) keys at less 2 minutes, when the PC detect it as QHUSUB_BULK, install the "Qualcomm_QHSUSB 9008" driver, the "QHUSUB_BULK" should changed to "Qualcomm_QHSUSB 9008" , then use Miflash, flash the stable or develope package for Mi4, It should work again.
Click to expand...
Click to collapse
Could anyone of you post the link of Qualcomm_QHSUSB 9008 driver? tried searching it everywhere, could not get it anywhere. Thanks in Advance
SharkcpN said:
Could anyone of you post the link of Qualcomm_QHSUSB 9008 driver? tried searching it everywhere, could not get it anywhere. Thanks in Advance
Click to expand...
Click to collapse
No, You don't need any drivers for it. MiFlash will automatically detect it.
Prince Chandela said:
No, You don't need any drivers for it. MiFlash will automatically detect it.
Click to expand...
Click to collapse
I followed your step, thing is my PC fails to detect Mi4 as QHSUSB_BULK, tried it on Windows 8.1/10
SharkcpN said:
I followed your step, thing is my PC fails to detect Mi4 as QHSUSB_BULK, tried it on Windows 8.1/10
Click to expand...
Click to collapse
wait for 12-24 hours or reinsert your battery.
wky750 said:
push power+(volume-) keys at less 2 minutes, when the PC detect it as QHUSUB_BULK, install the "Qualcomm_QHSUSB 9008" driver, the "QHUSUB_BULK" should changed to "Qualcomm_QHSUSB 9008" , then use Miflash, flash the stable or develope package for Mi4, It should work again.
Click to expand...
Click to collapse
bro because of you now my phone is working again, thanks.
i just keep pressing volume down and power button for like 2 or 3 mins, until the logo is showing then i can flash it
Related
Tried rooting moto xt1060 5.1 with the locked boot loader method, and then got stuck at the black screen from running python. Computer still recognizes it as a QCUSB (COM4) or something similar to that, but screen doesn't turn on at all. Tried every button combo, usb port, how-to's, but I'm a newbie with this. Any help would be appreciated. Thanks.
Its hardbrick, run root file inside that package, but first read and install every drivers mention on that post.
Salik Iqbal said:
Its hardbrick, run root file inside that package, but first read and install every drivers mention on that post.
Click to expand...
Click to collapse
which package?
motoexuser said:
which package?
Click to expand...
Click to collapse
The one you tried too root?
Salik Iqbal said:
The one you tried too root?
Click to expand...
Click to collapse
i tried it. no errors, but phone screen is still black. i am gonna charge the phone over night and try again.
also i get this error every time i try to run RSD lite "phone failed to switch to fast boot"
other info if it helps:
- phone is always recognized as "Qualcomm HS-USB QDLoader 9008 (COM5)"
- computer makes connecting and disconnecting sound when button combinations are held
motoexuser said:
i tried it. no errors, but phone screen is still black. i am gonna charge the phone over night and try again.
also i get this error every time i try to run RSD lite "phone failed to switch to fast boot"
other info if it helps:
- phone is always recognized as "Qualcomm HS-USB QDLoader 9008 (COM5)"
- computer makes connecting and disconnecting sound when button combinations are held
Click to expand...
Click to collapse
Well you need some extra help now.. will send you a package on monday.
Salik Iqbal said:
Well you need some extra help now.. will send you a package on monday.
Click to expand...
Click to collapse
thanks
i have probably bricked my phone . not booting up. doesn't even charge. can't boot to recovery as well. now i am trying to unbrick it using sp flash tool but it isn't happening. the phone keeps on connecting and disconnecting. i can see it is being recognized as mt65xx pre loader in device manager and when i click download in sp flash tool it just gets stuck nothing happens. help:crying::crying::crying:
konankiakshay said:
i have probably bricked my phone . not booting up. doesn't even charge. can't boot to recovery as well. now i am trying to unbrick it using sp flash tool but it isn't happening. the phone keeps on connecting and disconnecting. i can see it is being recognized as mt65xx pre loader in device manager and when i click download in sp flash tool it just gets stuck nothing happens. help:crying::crying::crying:
Click to expand...
Click to collapse
@konankiakshay,
you should press download button first, and after that you should connect your phone.
Hope this helps.
Utkarsh_Tiwari said:
@konankiakshay,
you should press download button first, and after that you should connect your phone.
Hope this helps.
Click to expand...
Click to collapse
yes i know that buddy. the phone is connecting and disconnecting and the flashing process doesn't even start in sp flash tool.
konankiakshay said:
yes i know that buddy. the phone is connecting and disconnecting and the flashing process doesn't even start in sp flash tool.
Click to expand...
Click to collapse
bro, you haven't installed the drivers for your phone.
Install tinno preloader drivers (just google it & you'll find), and repeat the process.
thank you for commenting mate. got it back to life.
konankiakshay said:
thank you for commenting mate. got it back to life.
Click to expand...
Click to collapse
Bro where did u find the preloader drivers.
Today,I Using MsmDownloadTool V3.0.6 flashing OnePlus3T_28_A.23_161027 has an error : sahara protocol download failed, please power outage phone and try again.
The Qualcomm dirver is OK, right display 9008 COM1 port on my pc.
Most of friends send their phone to OnePlus.com to repair,but i cannot.I just want to try by myself.
So what should I do ?Thanks a lot!
Eh~I forget something:
I use win7 32' & 64' in my VMware Workstation.
As well as I have one question about this flash way : which files will be flash?
This is my Verify File：
dynamic_nvbk.bin: OK
emmc_appsboot.mbn: OK
gpt_backup0.bin: OK
gpt_main0.bin: OK
userdata.img: OK
rawprogram0.xml: OK
NON-HLOS.bin: OK
rpm.mbn: OK
static_nvbk.bin: OK
tz.mbn: OK
boot.img: OK
cache.img: OK
persist.img: OK
recovery.img: OK
system.img: OK
So, are these files will be flash?Maybe I can flash it by myself with command : fastboot flash xxx xxx.xxx
Alright？
Try to reboot your computer, reinstall the driver, use diffrent USB Port, diffrent USB cable, or even a diffrent computer.
I encountered this issue a couple of times and solved it by rebooting my PC or using a different USB port.
Try to hold the power up button the whole process this worked for me
weihan1102 said:
Try to reboot your computer, reinstall the driver, use diffrent USB Port, diffrent USB cable, or even a diffrent computer.
I encountered this issue a couple of times and solved it by rebooting my PC or using a different USB port.
Click to expand...
Click to collapse
Thank u for your reply.
Actually I did this just now expect use different usb cable and computer ,I just have one usb cable and computer >_<...........
So thank u so much again,maybe I can use my friend's computer and usb cable.^_^
CroW_D said:
Try to hold the power up button the whole process this worked for me
Click to expand...
Click to collapse
Yup,I tried it but not work on my phone.
Hi bro,thanks a lot!
M4CH0 said:
Yup,I tried it but not work on my phone.
Hi bro,thanks a lot!
Click to expand...
Click to collapse
Kind of confused now did it worked my way ?.
CroW_D said:
Kind of confused now did it worked my way ?.
Click to expand...
Click to collapse
No , I did it , just have same result : the driver is OK and sahara protocol download faild either.
M4CH0 said:
No , I did it , just have same result : the driver is OK and sahara protocol download faild either.
Click to expand...
Click to collapse
I can't help you much but I know it is your computer's fault, I changed my computer 2 times before going back to the first one and it worked! Which was odd. I did restart the computer after some sort of windows update. If possible take out your mouse or keyboard USB and plug your phone in those. Not much help, sorry.
ExjeetzZ said:
I can't help you much but I know it is your computer's fault, I changed my computer 2 times before going back to the first one and it worked! Which was odd. I did restart the computer after some sort of windows update. If possible take out your mouse or keyboard USB and plug your phone in those. Not much help, sorry.
Click to expand...
Click to collapse
You are so kind.As I think it was my computer's problem too .I decide try it on other computer .I just use Linux on my PC ,you know all of this operation I did it on my VM.
Completely turn of your phone by holding power button for 40 seconds. Then press volume up button for 10 seconds and proceed further..
It helped me.
Sent from my OnePlus3T using XDA Labs
rahulrs0029 said:
Completely turn of your phone by holding power button for 40 seconds. Then press volume up button for 10 seconds and proceed further..
It helped me.
Click to expand...
Click to collapse
Thanks bro.I'll try it next time.
rahulrs0029 said:
Completely turn of your phone by holding power button for 40 seconds. Then press volume up button for 10 seconds and proceed further..
It helped me.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
Thank you so much bro, I use your method to solve this problem quickly, much kind of you, and I told others this method to solve their problems.:good:
M4CH0 said:
Thank you so much bro, I use your method to solve this problem quickly, much kind of you, and I told others this method to solve their problems.:good:
Click to expand...
Click to collapse
Sent from my OnePlus3T using XDA Labs
Thank
Bro.
I want to solution
MsmDownloadTool ''show Connect Timeout!''
linesouth.fone said:
Bro.
I want to solution
MsmDownloadTool ''show Connect Timeout!''
Click to expand...
Click to collapse
Sorry for late reply.. issue solved?
M4CH0 said:
Today,I Using MsmDownloadTool V3.0.6 flashing OnePlus3T_28_A.23_161027 has an error : sahara protocol download failed, please power outage phone and try again.
The Qualcomm dirver is OK, right display 9008 COM1 port on my pc.
Most of friends send their phone to OnePlus.com to repair,but i cannot.I just want to try by myself.
So what should I do ?Thanks a lot!
Eh~I forget something:
I use win7 32' & 64' in my VMware Workstation.
As well as I have one question about this flash way : which files will be flash?
This is my Verify File：
dynamic_nvbk.bin: OK
emmc_appsboot.mbn: OK
gpt_backup0.bin: OK
gpt_main0.bin: OK
userdata.img: OK
rawprogram0.xml: OK
NON-HLOS.bin: OK
rpm.mbn: OK
static_nvbk.bin: OK
tz.mbn: OK
boot.img: OK
cache.img: OK
persist.img: OK
recovery.img: OK
system.img: OK
So, are these files will be flash?Maybe I can flash it by myself with command : fastboot flash xxx xxx.xxx
Alright？
Click to expand...
Click to collapse
Don't use a virtual machine as it doesn't automatically pass all devices through. I had a similar problem until i used a standard windows pc
Hey Guys,
yersterday i installed thrue TWRP the LineageOS + LOS Root + Gapps. Everything was fine... till today.
I would like to enter the bluetooth settings. After then, the display recognises no touch, went black. First i could restart the phone. After restart i was going to bluetooth again. But, the same... After that, no more response from the phone. No, Battery LED, No Fastboot, No Recovery. The phone seems dead.
When i connect the phone to PC there is a "qualcomm hs usb qdloader 9008" device listed but no more. Miflash recognises no phone, adb is not showing.
What can i do? In which state is the Phone? EDL?
tommy536 said:
Hey Guys,
yersterday i installed thrue TWRP the LineageOS + LOS Root + Gapps. Everything was fine... till today.
I would like to enter the bluetooth settings. After then, the display recognises no touch, went black. First i could restart the phone. After restart i was going to bluetooth again. But, the same... After that, no more response from the phone. No, Battery LED, No Fastboot, No Recovery. The phone seems dead.
When i connect the phone to PC there is a "qualcomm hs usb qdloader 9008" device listed but no more. Miflash recognises no phone, adb is not showing.
What can i do? In which state is the Phone? EDL?
Click to expand...
Click to collapse
Going black for no reason is a common problem of Mi5.
It's in EDL mode.
Flash a fastboot rom and you will be okay to go.
Sent from my MI 5 using Tapatalk
Ok, thanks!
How can i flash a fastboot rom? Miflash can not find the Mi5! Have i to use a another Miflash Version?
tommy536 said:
Ok, thanks!
How can i flash a fastboot rom? Miflash can not find the Mi5! Have i to use a another Miflash Version?
Click to expand...
Click to collapse
Did you tap refresh in MI flash tool after connecting the device?device shows up only after refreshing.
Or else try this version
http://api.bbs.miui.com/url/MiFlash
Don't forget to uninstall the older mi flash before installing it.
Sent from my MI 5 using Tapatalk
Should i use the original Qualcomm drivers or the MiFlash ones?
tommy536 said:
Should i use the original Qualcomm drivers or the MiFlash ones?
Click to expand...
Click to collapse
You don't need to flash anything. Just disconnect and reconnect the battery. 2 minutes job. You can find a tutorial on YouTube.
vladimir_carlan said:
You don't need to flash anything. Just disconnect and reconnect the battery. 2 minutes job. You can find a tutorial on YouTube.
Click to expand...
Click to collapse
But after then, the warranty is lost...
How often does the Mi5 land in this mode? This is already a risk because of the use in the long term.
tommy536 said:
But after then, the warranty is lost...
How often does the Mi5 land in this mode? This is already a risk because of the use in the long term.
Click to expand...
Click to collapse
I figured that opening up sealed phone might make people scared or worry for their warranty.
Fastboot flash is easier sometimes maybe?
tommy536 said:
Should i use the original Qualcomm drivers or the MiFlash ones?
Click to expand...
Click to collapse
MiFlash automatically installs drivers.
Sent from my MI 5 using Tapatalk
tommy536 said:
But after then, the warranty is lost...
How often does the Mi5 land in this mode? This is already a risk because of the use in the long term.
Click to expand...
Click to collapse
In my case it happened very often on stock Lineage OS kernel. Never happened on Lineage while I was on DragonXia kernel or on MIUI.
OK! What can i do? Is it possible to switch the Kernel?
I have good news! Phone works after disconnect the battery. But this is not a solution.
I had after rebooting to ROM the same issue when i go to bluetooth settings. BT seems not working probably. If i go twice to BT settings the phone will brick.
Gesendet von meinem MI 5 mit Tapatalk
I had made a new installation with lineage OS without Root and mini Gapps. Now it seems, that BT will work normaly.
Hi I just recived my mi5 and was wanting to put a stock android rom on it that is stable, I see a couple of ROMs on here but not sure what to use or where to start if anyone can give me a guide and correct ROM to use, I'm in UK Scotland
Sent from my HTC One using Tapatalk
Please help me my phone is in EDL mode and i can't flash anything on it. It does not turn on no led no light no display no response. Just Qualacomm QDLoader 9008
Everytime i flash it gives me an error.
Max buffer sector is 256.
Errors and so on.....
How to fix please
I have reinstalled all drivers and programs , tried a lot of miflash versions , fastboot roms like 6-8. Many pc restarts
casuk said:
Hi I just recived my mi5 and was wanting to put a stock android rom on it that is stable, I see a couple of ROMs on here but not sure what to use or where to start if anyone can give me a guide and correct ROM to use, I'm in UK Scotland
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
If I were you I would definitely flash Lineage OS, its really solid, fast and has a good battery life.
Check this post for instructions. And give him a big thank
Spevky said:
Please help me my phone is in EDL mode and i can't flash anything on it. It does not turn on no led no light no display no response. Just Qualacomm QDLoader 9008
Everytime i flash it gives me an error.
Max buffer sector is 256.
Errors and so on.....
How to fix please
I have reinstalled all drivers and programs , tried a lot of miflash versions , fastboot roms like 6-8. Many pc restarts
Click to expand...
Click to collapse
I had the exact same problem, it happened randomly after a normal reboot. I was considering taking it apart to disconnect the battery, try a deepflash cable and EDL but then I solved it.
The problem is your Windows driver. That's why you can't flash anything. Read up on Xiaomi forums about the problem. I can't remember exactly how I solved it, but I think I uninstalled the driver, plugged the phone back in, wait for the automatic install on Device Manager, then for it to update, do a roll back and then flash it via MiFlash.
xdadevet said:
I had the exact same problem, it happened randomly after a normal reboot. I was considering taking it apart to disconnect the battery, try a deepflash cable and EDL but then I solved it.
The problem is your Windows driver. That's why you can't flash anything. Read up on Xiaomi forums about the problem. I can't remember exactly how I solved it, but I think I uninstalled the driver, plugged the phone back in, wait for the automatic install on Device Manager, then for it to update, do a roll back and then flash it via MiFlash.
Click to expand...
Click to collapse
Thanks. THat must be the problem. But i tried on my friends pc too and it did not work. Maybe Windows 7 is the problem? Im installing Windows 10.
Which OS do you have?
Spevky said:
Thanks. THat must be the problem. But i tried on my friends pc too and it did not work. Maybe Windows 7 is the problem? Im installing Windows 10.
Which OS do you have?
Click to expand...
Click to collapse
I don't think Windows 7 is the problem, but I've been using Windows 10 for 3 years (as Beta user) so I can't tell. Boot into EDL (Phone must be powered off, then hold both "Volume UP" and "Volume Down" as you plug it into the computer, only then do you let go) and tell me what driver your phone is seen as in Device Manager.
xdadevet said:
I don't think Windows 7 is the problem, but I've been using Windows 10 for 3 years (as Beta user) so I can't tell. Boot into EDL (Phone must be powered off, then hold both "Volume UP" and "Volume Down" as you plug it into the computer, only then do you let go) and tell me what driver your phone is seen as in Device Manager.
Click to expand...
Click to collapse
It is detected as QDLoader 9008 version of QDLoader 9008
im trying to follow the guides but im not understanding what to do I have downloaded adb and fastboot I extracted the files to a folder and im now stuck, whats this mean
•Append ;%USERPROFILE%\adb-fastboot\platform-tools to the end of the existing Path definition (the semi-colon separates each path entry)
that's were im am so far and im basically lost and need so help if anyone is kind enough to go through the steps with me
thanks
Ok I've unlocked the phone but i can seem to be able to root it