Hi guys,
So I think I soft bricked my phone, and tried do fix it by trying to follow the guides on the forums, however i have no idea what i'm doing, and dont understand it at all :crying: . I really need some help..
Well I managed to flash something on it and it works, thanks for the help guys
Related
Hi I'm new in here...I have HTC dream from Rogers Canada...I got it a couple months ago
I just tried to root it..and worked fine, but the dialer didn't work
I couldn't call, just receive calls..so I tried to un-root it
but suddenly it stopped working...every time I turn it of
it keep the Rogers startup and stays that way
I really don't know what to do...if anyone have any solution..I really need it fast
sorry for the trouble and thanx
http://forum.xda-developers.com/showthread.php?t=512453
try looking through that and see if you can help yourself there.
thanx...I'll try
Also try posting question in the Q&A section
The general cause of malfunctions is because people don't flash their RADIO and SPL. Your phone is probably? not bricked... yet
I used the steps in this thread:
http://forum.xda-developers.com/showthread.php?p=4280573#post4280573
I don't know...if anyone can explain to me what to do...I'll be really thankful
nevermind....it finally worked.....I was about to lose hope
but I re-do the root steps...and it worked..although I did it yesterday, but it didn't work
anyway...thanx everyone
hello
ive got a samsung galaxy s gt 19000
i want to be able to overclock my phone so i was pointed to this site.
after reading the sticky threads it says first thing first get the download mode working
ive tried loads of times and it will not work.
could someone help me out please.
need some noob guides please.
also if someone could help me clock my phone or point me in the right direction that would be great
thanks alot in advanced
also its a car phone warehouse phone
NEXT QUESTION INSTEAD OF OPENING ANOTHER THREAD
ok guys ive got my 3 button mode working fine.
what do i do next.
i want to be able to overclock my phone but when i find a thread about flashing it it says ive got to do this first so i click on that link then that says ive got to do this first etc etc
can someone point me in the right direction PLEASE!
after ive done what i need to do i will make a guide for noobs like me
Three Key Stickies .
http://forum.xda-developers.com/showthread.php?t=819551
http://forum.xda-developers.com/showthread.php?t=723596
http://forum.xda-developers.com/showthread.php?t=939752
If you want to overclock or mess with your phone and know nothing read nothing and learn nothing before you start be prepared to throw a dead phone in the bin .
So take your time and read up first .
jje
Hi, I have no 3BR either but I found an app that gives you the 3BR, it's called Quick Boot and is available in the market, hope that helps.
brian.
That app just goes to force shut down all the time
Jj i understand that you can brick your phone. Ive messed with a psp and that took days of reading. Just need to get this 3 button working and then go from there
http://forum.xda-developers.com/showthread.php?t=785201
I restored download mode on my phone using this guide, you need to read it very carefully though, as I bricked my phone on the first time trying (used odin v1 instead of 1.3), luckily if you do brick then you can use the download mode jig.
got it going ha ha now try to find out how to clock this baby
is anyone can help me with that would be great.
+1 to jjgane and DrFredPhD
http://forum.xda-developers.com/showthread.php?t=966646
just go there, you will find what you looking for
derrzredeem said:
http://forum.xda-developers.com/showthread.php?t=966646
just go there, you will find what you looking for
Click to expand...
Click to collapse
better get the reading glasses out. thanks for that
from what guides ive read through they all seem to be for people who know what there doing.
dont get me wrong i build my own computers (not exactly rocket science) and ive flished my gpu and ive flash WII's and psp's although i did have to do alot of reading on them there were many noob guides or at least semi noob guides
all seem to be going over my head a little
OP updated with another question. dont want to keep opening new threads. so if someone could help i would be grateful thank you
of reading on them there were many noob guides or at least semi noob guides
No all you can do is read whats posted first ..
Noob guides are of no use 99% of noobs dont read guides .
Overclocking most definitely advanced users .
User must be able to recover from bad flash and no how to flash via Odin via CPW update get into download mode and use a recovery jig .
The beginning posts.
http://forum.xda-developers.com/showthread.php?t=723596
http://forum.xda-developers.com/showthread.php?t=939752
jje
i tried to downgrade my Samsung galaxy s i9000 with this guide:
theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/ (copy & paste in the address bar)
but in the middle of the flashing the ezodin just stopped and got stuck (during the file "factoryfs.rfs")
so i have waited something like an hour and a half but it didn't help so i did what my friends told me and shot-off my SGS then when i tried to power it on again it just stayed like it's off- black screen, wont light, wont go either to download or recovery mod
what should i do!?!?!? even when i eject the battery it won't turn on!!
please help me !!! im clueless and my dad will kill me if i'll tell him
please help me!!! im sorry that i kinda spamming this thread nut i must figure it out
Read this thread. Maybe it might help.
yea its bricked too bad.. but dont worry try usb jig(search it here in xda)..i'm sure ur problem will b solved
hard brick
Hello
it looks like you r hard bricked.
your bootloader is toust.
you still can fix it with riff jtag.
look it up
hope it helps.
I also bricked my captivate.
hi mike i'm from israel too[= do u know any store that sells that "jig" thing?
xpboy7 said:
hi mike i'm from israel too[= do u know any store that sells that "jig" thing?
Click to expand...
Click to collapse
you can get it on amazon or they are very easy to make with basic soldering skills
First of all im so sorry that my first post is that i need help.
Second i bricked my galaxy tab p1000 GSM Carrier while updating it to 2.3.3
and now stucked at hard brick. i searched the internet and found nothing that could help me out until i got in here . so is there is a way to fix without using jtag riff box cuz it didnt worked for me and if there is would you plz guide me to step by step guide and btw iam good at soldering so there is no prob with me .
LOOOOOOOOOOL 79 VIEWS AND NO REPLAY
ALL I need is step by step guide to unbrickable mod ??? plz help
lord-ghost said:
LOOOOOOOOOOL 79 VIEWS AND NO REPLAY
ALL I need is step by step guide to unbrickable mod ??? plz help
Click to expand...
Click to collapse
If you bricked following an official upgrade, contact Samsung.
If you bricked because you didn't follow a guide properly, or did not know what you were doing, then your mostly on your own.
I highly doubt your the 1st person to do this, and I would take a guess that there exists a guide or method to unbrick.
My advice to you is strangely the first rule of XDA, Search. The information is there, you just need to find it.
Hard Brick?
Is it hard bricked or soft bricked?
Can you get to the download screen by pressing power and vol down at the same time? Or can you get to the computer / exclamation mark screen? If you leave the phone to charge overnight?
That would be soft bricked.
If you can't get to either of those then you are prob hard bricked and will need serious help. But there are people who can help you out on these forums. I remember seeing someone in the U.S. who had a JTAG and charged $50. If you're in Europe that's probably not a solution though!
Try here
...and as per post #3 you could search yourself
I think i've bricked my phone because it's stuck on lg sign....smart flash tools does not find nothing on communication setup and i don't know what to do. Please help me!
Sorry for my bad english
JoKeR[RO-VL] said:
I think i've bricked my phone because it's stuck on lg sign....smart flash tools does not find nothing on communication setup and i don't know what to do. Please help me!
Sorry for my bad english
Click to expand...
Click to collapse
How long did you wait? 1 minute or 10? Initial boot can take a bit.
Look at the threads:
http://forum.xda-developers.com/showthread.php?t=1111771
http://forum.xda-developers.com/showthread.php?t=1487105
There are some tutorials on un-bricking and fixing stuck installs.
SOLVED
I managed to flash ics stock again with smart flash tool Bricking the phone was my fault,I know
where I did wrong,but I came in this situation because after i've flashed izs occured an error over and over again: lg.setupwizard.apk stopped unnexpectedly.
Any ideas?
JoKeR[RO-VL] said:
I managed to flash ics stock again with smart flash tool Bricking the phone was my fault,I know
where I did wrong,but I came in this situation because after i've flashed izs occured an error over and over again: lg.setupwizard.apk stopped unnexpectedly.
Any ideas?
Click to expand...
Click to collapse
I've had glitches on occasion during install, but was always able to get back to recovery and re-install. Re-wiping is VERY important.
I think the important thing is that you were following a procedure, and because of that, you were able to identify where your error was and recover from it.
Welcome to the world of hacking!