I have decided to switch my AT&T Htc One M7 from GPE back to Sense. This device is S-Off and Bootloader Unlocked. This m7 was originally used on AT&T with Sense 4.4 Kitkat before being converted it to GPE.
My setup:
Windows 10 Pro
Latest HTC Drivers with USB 3.0 and 2.0 working correctly (Tested and working with fastboot commands)
HTC Sync Disabled.
Latest Android SDK (Updated)
New HTC Cable (Old one works too)
HTC One M7 - getvar all
C:\asdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.36.3218.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.04.1700.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT38ZW900702
(bootloader) imei: 354439056913306
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4187mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0ddc65a3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.113s
To continue, I have tried two different HTC RUU.exe. They both give the same error code.
ERROR [155]: Unknown Error
RUU_M7_UL_L50_SENSE60_MR_BrightstarUS_WWE_7.17.1540.51.exe
RUU_M7_UL_L50_SENSE60_MR_BrightstarUS_WWE_7.17.1540.35_Radio_4T.35.3218.16_10.33Q.1718.01L_release_448825_signed_2.exe
I also tried two AT&T RUU's. These had the same results as the above two.
RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_Radio_4M.32.3218.06_10.46.1718.01L_release_449059_signed_2.exe
RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.1_Radio_4M.32.3218.06_10.46.1718.01L_release_424933_signed_2.exe
I extracted the Rom.zip from both of these RUU's and tried flashing them thru fastboot oem rebootRUU. It failed to flash giving me this error; target reported max download size of 1526722560 bytes
target reported max download size of 1526722560 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 25202263 is not a multiple of the block size 4096
sending sparse 'zip' (1490936 KB)...
error: write_sparse_skip_chunk: don't care size 25202263 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 25202263 is not a multiple of the block size 4096
OKAY [106.289s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 106.624s
-------------------------------------------------------
I have read a lot of information from XDA and the internet. But I feel I am missing a step At this point I figure all of these flashing errors are due to the difference in filesystem sizes between Sense and GPE. If you have any suggestions I'd really appreciate it. Please include links and files if possible. Thanks
*** I have included pics in the attachments.
LightWeight_CO said:
I have decided to switch my AT&T Htc One M7 from GPE back to Sense. This device is S-Off and Bootloader Unlocked. This m7 was originally used on AT&T with Sense 4.4 Kitkat before being converted it to GPE.
My setup:
Windows 10 Pro
Latest HTC Drivers with USB 3.0 and 2.0 working correctly (Tested and working with fastboot commands)
HTC Sync Disabled.
Latest Android SDK (Updated)
New HTC Cable (Old one works too)
HTC One M7 - getvar all
C:\asdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.36.3218.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.04.1700.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4187mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0ddc65a3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.113s
Click to expand...
Click to collapse
At this point you are 90% there :good:
I'll give you the last 10% you need
In order to flash a 7.xx.xxx.x RUU (exe or zip) you must have at least hboot 1.57
And finally, to flash a 7.xx.xxx.x ruu.zip you must use the fastboot version that comes inside the ruu.exe (on the forum we call this one htc_fastboot but inside the ruu.exe it will simply be named "fastboot.exe"). Google's fastboot version can't handle files as big as the newer 7.xx.xxx.x RUUs. Anyway, that was just for your information since after flashing hboot 1.57 or 1.61, you should be able to flash the 7.17.154051 RUU.exe without any problem.
Here is the 1.61 hboot: https://www.androidfilehost.com/?fid=24269982087014709
to flash it:
Code:
fastboot oem rebootRUU
fastboot flash zip 7.17.1540.51_hboot_signedbyaa.img
fastboot flash zip 7.17.1540.51_hboot_signedbyaa.img
fastboot reboot-bootloader
then launch your RUU.exe or flash the ruu.zip using htc_fastboot
and don't panic if your phone is stuck at the white "HTC" splash screen for a while when booting for the fist time after the flash, the first boot can be a little longer than usual.
My One M7 is converted to GPE too, version HBOOT is 1.54, can i flash HBOOT 1.61 above?
Related
Okay - Don't want to say NOOB mistake but, failure to follow direction - YES. In any case I NEED HELP!!! Like everyone else, sold my phone and attempted to put it back to stock.
Changes made - Changed to Google Edition from AT&T.
- Rooted Phone - S-OFF - Changed CID to GOOGL001 - flashed GE RUU.zip -- Enough said
Changes made to go back to stock
- Changed CID back to CWS__001 -- Turned S-On ** First mistake -- Locked bootloader -- attempted to flash ATTRUU
- Went to flash cyanogenmod just to have a rom and accidentally FORMATTED in TWRP -- 2nd mistake
I have also tried every RUU that might have an inkling of success but all i get is the 12 signature verify fail
I have tried everything twice. But with out S-OFF i think i'm dead in the water.
I tried - flashing hboot1.44 (modifing android-info) and get error
c:\androidsdk\sdk\platform-tools>fastboot flash zip hboot144.zip
target reported max download size of 1526722560 bytes
sending 'zip' (508 KB)...
OKAY [ 0.230s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.279s
** I have tried RUU.exe's but nothing will go because of the CID/HBOOT mismatch
Here is what I have
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.06.1700.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35GW903487
(bootloader) imei: 354439055133427
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4305mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 6.940s
** If i could just flash an hboot - I could get an RUU working but again I need S-OFF.
- Also when I try to flash cyanogenmod from recovery, it says Unable to mount system, data, can't mount **** and I assume because recovery reformatted them and the correct file systems are not in place.
FML!!! PLEASE HELP
Read Vomers great post, and follow the instructions very carefully
http://forum.xda-developers.com/showthread.php?t=2365506&page=4
Also remove your imei number from your post
Sent from my HTC One using xda app-developers app
Guys, absolute noob here, so please bear with me.
I have a European HTC One with HTC Sense, long time ago I loaded Cyanogen on it.
now I want to sell it, so I am trying to put Sense back.
first, I locked the phone with ./Fastboot oem Lock.
I downloaded the RUU for the stock, I got a ZIP instead of an exe because I do not have access to a windows machine (please dont tell me to create a VM because my Mac for some reason doesnt deal well with vmware/bootcamp. so I have to do this on OSX).
this is the RUU name:
RUU Zip M7_UL_JB_50_HTC_Europe_1.29.401.16_R_Radio_4A.14.3250.13_10.33.1150.01_release_318486_signed_2_4_decrypted
so this is what I did:
fastboot oem rebootRUU
fastboot flash zip RUU.zip (I had renamed the zip file for short).
this is the output:
ahmads-mac-mini:android ahmadshaheen$ ./fastboot flash zip RUU.zip
sending 'zip' (1010240 KB)...
OKAY [ 42.967s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 143.829s
I tried doing it more than ten times, rebooted the mac, the phone, no result, same error. I thought this error has to do with the version, the rom version is exactly the same as the mainver on the phone.
here's a getvar all output:
ahmads-mac-mini:android ahmadshaheen$ ./fastboot getvar mainver
mainver: 1.29.401.16
finished. total time: 3.382s
ahmads-mac-mini:android ahmadshaheen$ ./fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4049mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
I am pretty much stuck in fastboot, I cant get into recovery or bootloader or anything, just fastboot.
I hope I have not bricked the phone !
Hi,
First of all, edit your post and remove imei numbers from:
(bootloader) imei:
And
(bootloader) serialno:
Now, try this:
http://www.htc1guru.com/downloads/stock-rom-downloads/
But you must do s-off to totally revert back to stock without tempered flags or relocked.
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA34GS900427
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4331mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
akijikan said:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA34GS900427
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4331mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
What is the ruu version you are trying to flash?
RUU_M7_WL_L50_SENSE60_SPCS_MR_Sprint_WWE_6.23.651.6_Radio_1.01.20.1225_CNV_CNV_SPCS_4.38_003_release_425282_signed_2.exe
I don't really care about anything other than having the phone be functional. I'm selling it.
akijikan said:
RUU_M7_WL_L50_SENSE60_SPCS_MR_Sprint_WWE_6.23.651.6_Radio_1.01.20.1225_CNV_CNV_SPCS_4.38_003_release_425282_signed_2.exe
Click to expand...
Click to collapse
your firmware must be at least kitkat to use a lollipop ruu (hboot 1.57) update your firmware then try to flash the ruu again.
https://www.androidfilehost.com/?fid=95916177934550539
Code:
fastboot oem rebootRUU
fastboot flash zip 6.23.651.6_full_firmware.zip
fastboot flash zip 6.23.651.6_full_firmware.zip
fastboot reboot-bootloader
then launch the ruu
I don't think it's flashing the firmware correctly? Both times it said this.
Code:
D:\>fastboot flash zip 6.23.651.6_full_firmware.zip
target reported max download size of 1514139648 bytes
sending 'zip' (45576 KB)...
OKAY [ 2.736s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 8.483s
akijikan said:
I don't think it's flashing the firmware correctly? Both times it said this.
Code:
D:\>fastboot flash zip 6.23.651.6_full_firmware.zip
target reported max download size of 1514139648 bytes
sending 'zip' (45576 KB)...
OKAY [ 2.736s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 8.483s
Click to expand...
Click to collapse
Your bootloader is Unlocked, it must be relocked for flashing ruu and firmware when s-on. So relock it
I don't believe that's the case? It says relocked at the top of the bootloader screen.
akijikan said:
I don't believe that's the case? It says relocked at the top of the bootloader screen.
Click to expand...
Click to collapse
Then it might be my fault, maybe the firmware linked is not signed (means you cant flash it on a s-on phone) sorry .
Do you remember what was the version-main number before it got deleted?
According to your hboot and radio version I think you were on a 3.xx.651.x or 4.xx.651.x version. Try an older RUU like this one (use the signed version, not the decrypted one)
Let me know if this is working
Thank you so much. The Sprint_HTC_One_m7wls_4.06.651.4_RUU.zip completed successfully!
I'm trying to flash 7.19.401.22 firmware with no red text, & I've also tried 7.19.401.2 with the same result.
S-OFF, cid: 11111111, model id: PN0720000.
Current ROM/Kernel: ViperOne 9.0/ElementalX 19.2.
Have tried on Windows 10 and WinXP
C:\sdk\platform-tools>fastboot flash zip firmware.zip
target reported max download size of 1514139648 bytes
sending 'zip' (29678 KB)...
OKAY [ 2.334s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 2.750s
C:\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.01.20.1225
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.23.651.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: *************
(bootloader) imei:***************
(bootloader) meid: ************
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4288mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.096s
Thanks for any help. I've tried searching but no answers for my particular situation(correct cid/model id)
Wls is Sprint phone. You can't flash WWE firmware on Sprint phone. Also, WWE mid is PN0721000, that's why you're getting modelid error
aSilvrHaze said:
I'm trying to flash 7.19.401.22 firmware with no red text, & I've also tried 7.19.401.2 with the same result.
S-OFF, cid: 11111111, model id: PN0720000.
Current ROM/Kernel: ViperOne 9.0/ElementalX 19.2.
Have tried on Windows 10 and WinXP
C:\sdk\platform-tools>fastboot flash zip firmware.zip
target reported max download size of 1514139648 bytes
sending 'zip' (29678 KB)...
OKAY [ 2.334s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 2.750s
C:\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.01.20.1225
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.23.651.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: *************
(bootloader) imei:***************
(bootloader) meid: ************
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4288mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.096s
Thanks for any help. I've tried searching but no answers for my particular situation(correct cid/model id)
Click to expand...
Click to collapse
Good thing it did not worked. You have a M7_WLS (PN0720000) variant and you are trying to flash a M7_UL (PN0710000) firmware on it. Flashing a M7_UL firmware on your phone will brick it. Fortunately the MID check failed and it did not happened. Be extra careful when flashing files on a s-off phone. You want to flash files that are compatible with M7_WLS (Sprint HTC One) only, better to visit the Sprint HTC One forum. The sprint HTC One is a CDMA phone not the same as the GSM variant of this forum.
alray said:
Good thing it did not worked. You have a M7_WLS (PN0720000) variant and you are trying to flash a M7_UL (PN0710000) firmware on it. Flashing a M7_UL firmware on your phone will brick it. Fortunately the MID check failed and it did not happened. Be extra careful when flashing files on a s-off phone. You want to flash files that are compatible with M7_WLS (Sprint HTC One) only, better to visit the Sprint HTC One forum. The sprint HTC One is a CDMA phone not the same as the GSM variant of this forum.
Click to expand...
Click to collapse
and after checking the sprint section, i feel like a dummy. I just upgraded to Viper 9.0, noticed a few bugs and someone mentioned latest firmware, & my search pulled up non sprint firmwares, should have known better, thanks for pointing it out.
aSilvrHaze said:
and after checking the sprint section, i feel like a dummy. I just upgraded to Viper 9.0, noticed a few bugs and someone mentioned latest firmware, & my search pulled up non sprint firmwares, should have known better, thanks for pointing it out.
Click to expand...
Click to collapse
Afaik, the latest sprint firmware is 6.23.651.7, the one currently installed on your phone is 6.23.651.6 so its not really old and should work fine imo. Since ViperOne is said to be compatible with sprint variant since version 8.0 it should work fine your phone. Make sure to flash it using the recommended recovery version (if any) and also that you are using a sprint compatible recovery to flash it, like twrp for sprint.
Otherwise it might only be some bugs not corrected yet by the dev, might worth reading the discussion and q&a section of the ViperOne to see if anyone is having the same bugs and finally asking in the rom thread.
Good luck :good:
Btw if you want to update the firmware, you can use the 6.23.651.7 RUU from htc website: http://www.htc.com/us/support/rom-downloads.html
Remember that flashing a ruu will wipe everything from your phone, you'll have to reflash the custom recovery + custom rom after. Don't forget to backup your important data before flashing the RUU
Hello Guys,
I own an HTC One m7 AT&T
MID: PN0712000
CID: CWS__001
I had a cyanogen mod 12 on my device but i wanted to get it back to stock. so i searched on google and downloaded this RUU file (RUU_M7_UL_JB_50_Cingular_US_1.26.502.15_Radio_4A.17.3250.20_10.40.1150.04_release_326691_signed_2_2) and tried to flash it to my device. 1st I relocked my bootloader and then tried to flash it with my PC. After some proccessing it showed an error that it not the right RUU file.
Now I am helpless and cant do anything with my device.
I can only get into the Boot loader and thats all.
My bootloader display shows this:
***TAMPERED***
***RELOCKED***
*** Security warning***
m7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4m.27.3218.14
OpenDSP-v32.120.274.0909
OS-
And my Getvar all details are:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT361W902272
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4316mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.094s
I will be very glad if you helped me...!!
amir_khan007 said:
Hello Guys,
I own an HTC One m7 AT&T
MID: PN0712000
CID: CWS__001
I had a cyanogen mod 12 on my device but i wanted to get it back to stock. so i searched on google and downloaded this RUU file (RUU_M7_UL_JB_50_Cingular_US_1.26.502.15_Radio_4A.17.3250.20_10.40.1150.04_release_326691_signed_2_2) and tried to flash it to my device. 1st I relocked my bootloader and then tried to flash it with my PC. After some proccessing it showed an error that it not the right RUU file.
Now I am helpless and cant do anything with my device.
I can only get into the Boot loader and thats all.
My bootloader display shows this:
***TAMPERED***
***RELOCKED***
*** Security warning***
m7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4m.27.3218.14
OpenDSP-v32.120.274.0909
OS-
And my Getvar all details are:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT361W902272
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4316mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.094s
I will be very glad if you helped me...!!
Click to expand...
Click to collapse
You can't downgrade with s-on. Flash a recent AT&T ruu. Look at the sticky threads in the general section
How to flash a zip?
alray said:
You can't downgrade with s-on. Flash a recent AT&T ruu. Look at the sticky threads in the general section
Click to expand...
Click to collapse
NOW THAT I HAVE DOWNLOADED THE ZIP FILE
PN07IMG_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.1_Radio_4M.32.3218.06_10.46.1718.01L_release_424933_signed.zip
I DONT KNOW HOW TO FLASH IT.
PLEASE EXPLAIN IT TO ME STEP BY STEP AND ALSO GIVE THE LINKS TO REQUIRED FILES...!
alray said:
You can't downgrade with s-on. Flash a recent AT&T ruu. Look at the sticky threads in the general section
Click to expand...
Click to collapse
i downloaded the file PN07IMG_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.1_Radio_4M.32.3218.06_10.46.1718.01L_release_424933_signed
and tried to flash it in fastboot mode and it shows the following display:
E:\Fastboot>fastboot flash zip RUU.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 131874611 is not a multiple of the block size 4096
sending sparse 'zip' (1478648 KB)...
error: write_sparse_skip_chunk: don't care size 131874611 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 131874611 is not a multiple of the block size 4096
OKAY [125.143s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 275.091s
E:\Fastboot>fastboot reboot
rebooting...
finished. total time: 0.031s
alray said:
You can't downgrade with s-on. Flash a recent AT&T ruu. Look at the sticky threads in the general section
Click to expand...
Click to collapse
OH MY GOODNESS
ITS DONE
ITS BACK
I CANT BELIEVE IT
@alray I dont know how to thank you. but I will pray to GOD to give you all the heavens HE made.................!!!
Amen
thanks buddy
thank you really very much....!!
Hello I have the same problem my HTC m7 says tampered relocked security warning and is in 's-on I'm on sprint what do I do .
Phones2phones said:
Hello I have the same problem my HTC m7 says tampered relocked security warning and is in 's-on I'm on sprint what do I do .
Click to expand...
Click to collapse
If you want to go back to stock flash the Sprint RUU.