Database Develop

Milestone doesn't boot anymore

Hi there,
my brother's Milestone doesn't boot at all, not even the "M" logo at the beginning. It's a rooted phone, with stock 2.2
He was using it (with enough battery) and it suddenly switched off.
I have tried with the battery of my own Milestone, but still his phone doesn't boot up at all.
Is there anything I can do to fix it?
Thanks in advance.

plug it into a wall charger without a battery.. see if anything happens

Thanks. While light surrounds the microUSB connection in the phone, but screen doesn't show anything.

what if you tap the power button and hold it down?
Does the screen light up a little or is it pitch black?

Nope, screen doesn't light up at all. Guess there's no home-made solution then.

Dunno... I guess you tried holding x or camera with it plugged in and no battery?
Normally you can get to recovery without the battery when plugged in
Sent from my Milestone using Tapatalk

Exactly, tried all that altogether with power button, but ... nothing.
It's not a problem during the flashing process, which can be usually fixed by that, is just that it doesn't do anything anymore.
Guess I'll send it to Motorola. Maybe I'll get "lucky" and get a Milestone 2 in exchange as someone else in the forum.

Moto G xt1069 dead after discharge batery!

hello everyone!
i have a big problem with my MotoG (xt1069).
At about 5 days it was working normally, however when discharged he not charged more.
Put another battery and did not work but his battery ran into another motoG.
I tried to put into recovery mode, but he did not enter.
Could someone help me?

It may be due to wrong battery calibration. Try to connect your phone to charger for 5-6 hours and then turn on the mobile. If it works charge the mobile only after the remaining charge become less than 15 ℅ repeat the same for three times

You could also try to hold power and volume down for 2 minuets. Do you get a white screen with a battery?
Sent from my XT1039 using XDA Free mobile app

[Q] Charging Problem

Hi, so my moto g 2014 is odd.
When I plug it in to charge (btw it is at 0% right now) it would charge, flash the 0% battery symbol and then go to the motorola symbol (the thing when you first turn it on) and vibrate one pulse. After that it would go black. It would do this continuously. I plugged it into my computer and heard it charge for a few seconds and then stops and disconnects ...how do I fix this?

The quickest thing to do would be trying another cord to rule that out.

My moto g 2nd gen drained out completely last night, and today morning when I try to charge it,the initial screen shows up i.e. the blue M logo with the powered by android written below.Then it vibrates exactly one pulse and then goes off.Have you guys faced a similiar problem?Why is this exactly happening? I bought the phone just a week after it's release. Also,sometimes the phone just randomly starts and then does the same thing mentioned above,and goes off.
I already tried using a different cord, but that doesn't work.

I really need your guys help with my bootlooped Moto g. Please Im desperate

Hi!,
Today I was using my Moto g 2014 LTE XT1072 and suddenly it crashed and it got stuck in a bootloop. Im running cyanpop 6.0.1 and TWRP as recovery. Now I get the unlocked bootloader warning, the fibration and than it goes black. Sometimes it get to see a small portion of the cyanpop boot animation, but it stil goes black after that. I can't get into recovery. If I hold the power and volume down button the bootloop stops for 20 secs. After that it begins again. My PC does not spot the phone when I plug it in with Motorola Device Manager installed.
I really do not know what to do anymore. Do I have to buy a new phone? Please save me from the suffering. If you need any more information please ask.
EDIT: Good news everyone! After the battery drained and leaving it alone for 24 houres the phone booted normally. Thanks guys for the help!

have you tried to enter in fastboot mode?

Zagomah said:
have you tried to enter in fastboot mode?
Click to expand...
Click to collapse
Well I can't get into it from recovery, because I can't get excase it. My Pc did start seeing it when its in 'charge mode' (not sure what the real name is), but when I type 'adb devices' in minimal ADB and Fastboot it just says 'list of devices attached'. And when I try 'fastboot devices' it does nothing. Not sure what to know.

Captain_Bacon said:
If I hold the power and volume down button the bootloop stops for 20 secs.
Click to expand...
Click to collapse
While powered off and no cables connected
hold power + vol-down 3/4 seconds (screen stay black) then release the power and keep vol-down pushed (bootloader screen is visible now) release vol-down, .
Not working ? are you sure ?

dr.nic said:
While powered off and no cables connected
hold power + vol-down 3/4 seconds (screen stay black) then release the power and keep vol-down pushed (bootloader screen is visible now) release vol-down, .
Not working ? are you sure ?
Click to expand...
Click to collapse
Will try this at home!

Nope, still the same thing. The loop stops for 20 secs and just continues after

Captain_Bacon said:
Hi!,
Today I was using my Moto g 2014 LTE XT1072 and suddenly it crashed and it got stuck in a bootloop. Im running cyanpop 6.0.1 and TWRP as recovery. Now I get the unlocked bootloader warning, the fibration and than it goes black. Sometimes it get to see a small portion of the cyanpop boot animation, but it stil goes black after that. I can't get into recovery. If I hold the power and volume down button the bootloop stops for 20 secs. After that it begins again. My PC does not spot the phone when I plug it in with Motorola Device Manager installed.
I really do not know what to do anymore. Do I have to buy a new phone? Please save me from the suffering. If you need any more information please ask.
EDIT: Good news everyone! After the battery drained and leaving it alone for 24 houres the phone booted normally. Thanks guys for the help!
Click to expand...
Click to collapse
Nice to know. Moto G family phones tend to suffer from battery-motherboard problems, usually related to current issues. Is your charger at least 1.0A? My Thea's battery drained at school, I tried to connect it to a generic charger and the phone misbehaved and became trapped in a 0% screen loop, and did not appear to grab some charge. I thought to myself "Oh no! My expensive phone is now ruined forever and my warranty is void! What I'm gonna do?" But I walked home, connected it to my old reliable Samsung charger to see what happens and voila! The phone started charging and I could turn it on again.

benjausen said:
Nice to know. Moto G family phones tend to suffer from battery-motherboard problems, usually related to current issues. Is your charger at least 1.0A? My Thea's battery drained at school, I tried to connect it to a generic charger and the phone misbehaved and became trapped in a 0% screen loop, and did not appear to grab some charge. I thought to myself "Oh no! My expensive phone is now ruined forever and my warranty is void! What I'm gonna do?" But I walked home, connected it to my old reliable Samsung charger to see what happens and voila! The phone started charging and I could turn it on again.
Click to expand...
Click to collapse
I used my Nvidia Shield Tablet charger, which is pretty beafy. I experienced somewhat the same thing. Did yours keep trying to boot aswhile?

Captain_Bacon said:
I used my Nvidia Shield Tablet charger, which is pretty beafy. I experienced somewhat the same thing. Did yours keep trying to boot aswhile?
Click to expand...
Click to collapse
Kind of. The phone would not respond nor turn it's LED on. When connected into any charger the phone screen would turn on in the 0% battery screen. If I touched anything, the phone turned off and the 0% screen appeared again. Also sometimes it would just appear again like crazy, like if I killed the bootloader or something alike. After connecting to the Samsung charger, the 0% screen appeared again and the screen turned off. I didn't touch anything out of fear. After three minutes, the Bootloader Unlocked message appeared and finally the phone booted to TWRP's charging screen. I let it charge to 4% and tried to start the phone. The phone booted into CM12.1 and problem solved. I hope these issues never happen to us again. It would mean motherboard degeneration/wearing out/side effect from bootloader unlock and flashing or something alike. Thanks for the answer.

benjausen said:
Kind of. The phone would not respond nor turn it's LED on. When connected into any charger the phone screen would turn on in the 0% battery screen. If I touched anything, the phone turned off and the 0% screen appeared again. Also sometimes it would just appear again like crazy, like if I killed the bootloader or something alike. After connecting to the Samsung charger, the 0% screen appeared again and the screen turned off. I didn't touch anything out of fear. After three minutes, the Bootloader Unlocked message appeared and finally the phone booted to TWRP's charging screen. I let it charge to 4% and tried to start the phone. The phone booted into CM12.1 and problem solved. I hope these issues never happen to us again. It would mean motherboard degeneration/wearing out/side effect from bootloader unlock and flashing or something alike. Thanks for the answer.
Click to expand...
Click to collapse
No probs my friend and I wish you the same. Let the moto gods protect us.

Moto g (1st gen), dead but can it be revived enough to backup data?

My moto g (1st gen) started just turning off randomly and then failed to restart. I tried all the tricks of holding the volume and power on for 2+ minutes but all to no avail. I purchased a new battery thinking that was the issue but changing it achieved nothing.
I checked the voltage of the new battery before I installed in and it showed approx. 3.7v but after leaving in the phone for a couple of days it read 0.00 volts, exactly the same as the old battery - any ideas what could cause this? A short somewhere? With both reading zero, i'm guessing they are toast?
I've tried removing the battery and connecting to a known good usb charger, swapped out usb cables. But noting seems to be working. When connected to power I get the single white LED I think notifying there is insufficient power to show the battery indicator on screen. With the battery in I got a screeching noise from the speaker which did not sound too healthy....
I've downloaded the moto windows software but the laptop cannot see the mobile, so no luck there.
Does anyone have any idead how I can revive it from the dead to get some pictures and whatsapp chats off it?
Cheers!