No Text Notification or Call ability when at home - LG Watch Urbane

My Setup: LG G5 with Urbane 2nd Edition -
I am unable to get have any text messaging notifications or phone call ability when I am at home. calls and texts ring on phone, and watch sits there no response. I get that it is cellular signal issues, but my phone works fine and there isn't any kind of Bluetooth connection between them that I can tell.
I came from a Galaxy Gear S2, and in the basement when phone would get a call or text, they'd show up just fine on the watch. Not with my new LG G5 and Urbane 2nd edition.
The S2 would work as a Bluetooth external mic and speaker basically, so it didn't rely on the data connectivity for this functionality. Any idea if the Android Wear Urbane 2 can do it?
I'm also working on getting a Microcell from AT&T -
Here is troubleshooting I have performed in get this working:
Factory Reset Watch -
Removed Bluetooth Pairing from Phone -
Uninstalled/Reinstalled Android Wear -
That did nothing, still remembers watch -
"Forget Watch" in Android Wear -
100% from scratch redid "Pair with your watch" process now that both watch and phone have been system updated -
Set to ignore Optimizations while setting up the "Always be connected" options -
Set Screen Always on to OFF -
Started Syncing 21 apps back process automatically -
Successfully reactivated AT&T Number Sync as factory reset sent me a text it disabled -
Verified apps aren't in the blocked notification list -
~~
STILL cannot get text notifications or calls on it when at home -

The other problem I have found with this is my Bluetooth does not have a call or media audio profile option.
Everything else, my car, headset, Gear S2's etc, show "Call" and "Media Audio" profiles in the Bluetooth sync menu for that device.
This Watch only shows Change Watch name and Unpair.
I've read people saying that the Cellular Urbane should be like "Do you want to use watch or phone to place call"

theratdude64 said:
The other problem I have found with this is my Bluetooth does not have a call or media audio profile option.
Everything else, my car, headset, Gear S2's etc, show "Call" and "Media Audio" profiles in the Bluetooth sync menu for that device.
This Watch only shows Change Watch name and Unpair.
I've read people saying that the Cellular Urbane should be like "Do you want to use watch or phone to place call"
Click to expand...
Click to collapse
I believe it works this way when numbersync isn't activated. I don't have AT&T so I don't have the numbersync option. Without numbersync, I have an option in my bluetooth settings on the watch for "play phone audio on watch". When paired by bluetooth I have the option to call with phone or watch. I have to use the call forwarding option when I leave the phone behind to get calls to the phone to be sent to the watch.

hm, I tried disabling the Number Sync and re-pairing but it doesn't change the bluetooth profile.
Perhaps it is just AT&T Models don't have it
This thread here confirms that An Urbane 2nd edition should ask "Watch or Phone" when making a call
https://productforums.google.com/forum/m/#!msg/android-wear/v5-gJCTwa3w/VO_ap8b_AQAJ
I see where it specifies watch calling but it never asks which I wanna use

theratdude64 said:
hm, I tried disabling the Number Sync and re-pairing but it doesn't change the bluetooth profile.
Perhaps it is just AT&T Models don't have it
This thread here confirms that An Urbane 2nd edition should ask "Watch or Phone" when making a call
https://productforums.google.com/forum/m/#!msg/android-wear/v5-gJCTwa3w/VO_ap8b_AQAJ
I see where it specifies watch calling but it never asks which I wanna use
Click to expand...
Click to collapse
I have the AT&T model. I just don't use AT&T service. I have the option under bluetooth settings on the watch to 'play phone audio on watch'. I believe you have to turn off numbersync in the watch settings and not just through AT&T. Is there a setting on the watch under settings>cellular>number sync.... to deactivate it?

mward1995 said:
I have the AT&T model. I just don't use AT&T service. I have the option under bluetooth settings on the watch to 'play phone audio on watch'. I believe you have to turn off numbersync in the watch settings and not just through AT&T. Is there a setting on the watch under settings>cellular>number sync.... to deactivate it?
Click to expand...
Click to collapse
Hi there you need to make sure that you uncheck the options to share number with phone for calls and also texts, you will then have the option to 'pay audio on watch' under bluetooth settings, this was it will notify you of call on watch and phone (much like a standard non LTE/3G wear watch

Related

[CM7] Bluetooth launches voice service when pairing with car's stereo

Hi all,
I have an O2X and a JVC KD-X50BT digital receiver installed on my car. With this setup I'm supposed to be able to play my phone's music through car's speakers using the bluetooth from both devices and also answer or make phone calls, everything without the need of getting my phone out of my pocket. Since I installed CM7.2 a few days ago every time I pair both devices I get a message in the receiver "WAIT VOICE Optimus 2X" and I can't do anything, it seems like the receiver is waiting for me to say something. If I click "Back" button (it's the only button I can click =S) in the receiver the message disappears but the music won't play even if the player in the phone shows the music is playing. The only thing I've found that I can do is go to the properties of the BT pairing connection in the phone and disable the "phone" profile leaving only "Media" profile enabled. By doing this I'm able to listen to my music but I lose the phone capabilities in the receiver. If I enabled again the phone profile the music mutes and the "WAIT VOICE" message appears again.
With CM7 comes installed the Voice Dialer app. which if I open it while paired with the receiver the message "WAIT VOICE Optimus 2X" appears and if I close it the message disappears. I have tried uninstalling this app. and also TTS Service and Pico TTS but nothing works. I really don't need and don't want to have voice commands, for that I have the receiver which comes with a microphone and a lot of options for calling.
This never happened before with the stock ROM and yesterday I tested with a second Android phone with stock ROM and it paired with no problems and with both "phone" and "media" profiles, no "WAIT VOICE" messages or anything like that, everything just perfect, music, phone calls, messages, everything.
So, before CM7 everything was perfect, any ideas? maybe a service running in the background that launches some kind of app or something when it pairs? an app that makes the receiver think that I entered in "talk" mode so it is waiting for me to say something?
Right now I have a piece of useless technology installed in my car that I can't use and I'm not going to sacrifice phone or music capabilities =/!

Automatic Call Forwarding: SOLVED

Answering a question no one asked but functionality I was after.
Borne of a good post on Reddit if your Android Wear watch is hijacking your bluetooth so your phone won't connect to your cars handsfree:
https://www.reddit.com/r/hwatch/comm...adset_profile/
It's a good app and works well for me.
Got me to thinking whether it could be adapted to automatically forward calls to my phone when out of bluetooth range and back to the phone's voicemail when connected via BT. The problem with the inbuilt call forward function is that when you turn it off it erases all the forwarding options including to the phone's voicemail. What the phone's option to turn off/on the forwarding does is send an MMI code to the cell network to update the forwarding options - the same can be done by just entering them numerically.
The list of MMI codes on wikipedia makes it a versatile tool:
https://en.wikipedia.org/wiki/Call_forwarding#Europe
Using the Reddit post as a guide I created 2 flows:
1) Forward to voicemail on BT connect -> Trigger: BT device connected (Urbane) -> Action: Call number *004*[voicemail number]#
2) Forward to Urbane on BT disconnect -> Trigger: BT device disconnected (Urbane) -> Action: Call number *004*[watch number]#
Works really well, so if I walk out of BT range the phone forwards calls to the watch if busy/unanswered etc and back to voicemail once back in range.
Hope this is of use to someone.

Urbane 2 - Use bluetooth calls from phone instead watch

Hi,
By default when i use ok google call XYZ the call is being made on the watch itself and not on the mobile phone.
How can i make or switch between watch call or bluetooth call on my phone?
Svid said:
Hi,
By default when i use ok google call XYZ the call is being made on the watch itself and not on the mobile phone.
How can i make or switch between watch call or bluetooth call on my phone?
Click to expand...
Click to collapse
If you're paired to phone via Bluetooth, make sure you're not connected to number sync... In order to use the voice diameter to initiate a call from your phone: settings -> Bluetooth -> enable phone audio: ON
Note when you "OK Google, call Batman" it will dial through your phone (if data is enabled it will prompt you to choose phone or watch).
Two annoyances:
1. Even though it's now using your phone, it will default to the watch speaker and microphone- obviously you can change on your phone's call screen to phone. Unfortunately, without phone audio enabled in Bluetooth it will not route calls through your phone.
2. If numbersync is on, the watch will assume it's a phone, even if paired. But, you just have to toggle it off (rather than disassociating).
Good luck!
Sent from my LG-V930 using Tapatalk
JCred said:
If you're paired to phone via Bluetooth, make sure you're not connected to number sync... In order to use the voice diameter to initiate a call from your phone: settings -> Bluetooth -> enable phone audio: ON
Note when you "OK Google, call Batman" it will dial through your phone (if data is enabled it will prompt you to choose phone or watch).
Two annoyances:
1. Even though it's now using your phone, it will default to the watch speaker and microphone- obviously you can change on your phone's call screen to phone. Unfortunately, without phone audio enabled in Bluetooth it will not route calls through your phone.
2. If numbersync is on, the watch will assume it's a phone, even if paired. But, you just have to toggle it off (rather than disassociating).
Good luck!
Sent from my LG-V930 using Tapatalk
Click to expand...
Click to collapse
Hi.
I have a similar problem. In the LG Watch Urbane 1 gen all worked fine, in 2 I have a problem because I am using a Bluetooth headset. And I wanted to call with a Bluetooth set instead of a watch. If enabled "enable phone audio: ON" then the watch is ringing only by the watch, as I turn off it stops ringing completely. Is there any way to solve this problem?
Solved
I solved the problem using two applications "Bluetooth Auto Connect" and "MacroDroid".

Call notification on Urbane 2

Just got the watch and apart from the belt I really like it. The one thing that I can't get it to do is to show notification when someone is calling my phone... it simply doesn't do anything. Everything else works perfectly (gmail, whatsapp notifications etc). No custom image or anything - just updated OTA after I powered it on. I don't know if call notifications worked before.
Any clues?
Thanks.
stargatesg1 said:
Just got the watch and apart from the belt I really like it. The one thing that I can't get it to do is to show notification when someone is calling my phone... it simply doesn't do anything. Everything else works perfectly (gmail, whatsapp notifications etc). No custom image or anything - just updated OTA after I powered it on. I don't know if call notifications worked before.
Any clues?
Thanks.
Click to expand...
Click to collapse
Under the bluetooth settings in the watch have you enabled 'play phone audio on watch'?
I only have the options to rename or unpair under LG 7993.
stargatesg1 said:
I only have the options to rename or unpair under LG 7993.
Click to expand...
Click to collapse
You may have to disable numbersync or the 'watch shares number with phone' option in order for the 'play audio on watch' option to appear in the bluetooth settings. On my watch it's under settings> cellular> advanced>'watch shares number with phone '. If I turn this off, then I see the audio option in the bluetooth settings. There was a thread about this in the AC forums. Maybe it will help..... http://forums.androidcentral.com/showthread.php?t=664344
Both call and text are off in watch shares number with phone. But this setting in bluetooth would not make all audio from the phone go through the watch just like a bluetooth headset? Doesn't sound good - forget the pun
stargatesg1 said:
Both call and text are off in watch shares number with phone. But this setting in bluetooth would not make all audio from the phone go through the watch just like a bluetooth headset? Doesn't sound good - forget the pun
Click to expand...
Click to collapse
It doesn't make every sound go through the watch but it does need to be enabled for calls to ring through the watch. No luck with the option appearing? No way to disable numbering? (If it's enabled) The linked thread didn't help?
This is the way mine looks.....
Hah! Found it under settings - bluetooth. I was looking under cellular.
Thank you!
stargatesg1 said:
Hah! Found it under settings - bluetooth. I was looking under cellular.
Thank you!
Click to expand...
Click to collapse
No problem. Calls coming through now?
Yep! And media is on the phone exactly as it should be. Thanks.
stargatesg1 said:
Yep! And media is on the phone exactly as it should be. Thanks.
Click to expand...
Click to collapse
No problem.
Hello,
I was searching for this options also, with setups in this thread - now my watch see when somebody is calling, but when I answer it sound is directed to the watch... also it disconnects my other bluetooth headphone device... any other way so that LG will notify about call connection and just that?
Thanks for reply...
When I enable 'play phone audio on watch' my car bluetooth is not able to connect to the phone and bluetooth in-ear handsfree has the same problem. Looking at the BT icon on the phone it seems that the watch is acting as a hands-free and the phone does not allow to connect more of them. But the choice between having call notification on the watch and having car handsfree working is a hard one. Anyway able to have both of them simultaneously?
rastik said:
When I enable 'play phone audio on watch' my car bluetooth is not able to connect to the phone and bluetooth in-ear handsfree has the same problem. Looking at the BT icon on the phone it seems that the watch is acting as a hands-free and the phone does not allow to connect more of them. But the choice between having call notification on the watch and having car handsfree working is a hard one. Anyway able to have both of them simultaneously?
Click to expand...
Click to collapse
If you place a SIM card in the watch, then it is possible. Of course, the SIM card in the watch must have the same number as the one in your phone. Please note that not a provider offer this so-called MultiSIM option.
Thank you for the explanation. Is 'play phone audio on watch' working the same on Wear 1.5? I'm using AW2.0 and I haven't tried it on original firmware before upgrade.
Small update: on AW2.0 DP4 call notification works even without setting 'play phone audio on watch', active BT connection is enough. So it works and does not collide with hands-free.
Its pity that there is no way to pair AW 2.0 preview watch with iPhone

OnePlus 3T will send all notifications except phone calls to my Moto 360 2nd gen

Anyone else have this issue?
I get calendar , messages by text and email card notifications and it will vibrate my watch. If I get a phone call my phone will ring and\or vibrate but my watch will not vibrate nor show an incoming call.
I'm having the same issue with my zenwatch 2. Everything goes to my watch except calls. Never shows me who's calling.
c_86 said:
I'm having the same issue with my zenwatch 2. Everything goes to my watch except calls. Never shows me who's calling.
Click to expand...
Click to collapse
I'll have to hook my ZW2 to my phone and test this myself.
Check whether "Phone audio" is enabled in phone's Bluetooth settings for paired watch.
Although this option should be checked only in case you want to use built-in speaker of watch (if it has one).
Did any of you guys set your phone up by NFC? There's a known issue, need too set it to manually.
I pair mine manually all the time. Never one used nfc to pair.

Categories

Resources