I am using the MR.SL (http://forum.xda-developers.com/xperia-z/development/rom-sl-lp-228-5-1-1-t3348536) Rom. But This rom doesn't have Tap2Wake mode. I would like to use the Tap2Wake.
Which would you recommend the kernel?
Zombie kernel?
ProPeace said:
I am using the MR.SL (http://forum.xda-developers.com/xperia-z/development/rom-sl-lp-228-5-1-1-t3348536) Rom. But This rom doesn't have Tap2Wake mode. I would like to use the Tap2Wake.
Which would you recommend the kernel?
Click to expand...
Click to collapse
first you should flash zombie kernel from : http://forum.xda-developers.com/xperia-z/orig-development/kernel-zombie-t3126417
then you should install kernel adiutor https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=en
then open kernel adiutor go to wake controls and enable Double Tap 2 Wake.
mrp1375 said:
first you should flash zombie kernel from : http://forum.xda-developers.com/xperia-z/orig-development/kernel-zombie-t3126417
then you should install kernel adiutor https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=en
then open kernel adiutor go to wake controls and enable Double Tap 2 Wake.
Click to expand...
Click to collapse
But This rom isn't work with Zombie Kernel. Can you help me this thread?
ProPeace said:
But This rom isn't work with Zombie Kernel. Can you help me this thread?
Click to expand...
Click to collapse
check the kernel adiutor wake options ,if your current kernel supports tap 2 wake feature then you should see enable option for it like this,press thanks if you find this helpful
mrp1375 said:
check the kernel adiutor wake options ,if your current kernel supports tap 2 wake feature then you should see enable option for it like this,press thanks if you find this helpful
Click to expand...
Click to collapse
It doesn't have this property.
ProPeace said:
It doesn't have this property.
Click to expand...
Click to collapse
so this means your kernel doesn't support this feature.
zombie kernel should work on stock 5.0.2 and 5.1.1 (.454/.222/.228) and any custom rom based on them.
you can test zombie on your rom ,i think it should work without any problems because Mr.sl rom is also based on stock 5.1.1 (.228).
mrp1375 said:
so this means your kernel doesn't support this feature.
zombie kernel should work on stock 5.0.2 and 5.1.1 (.454/.222/.228) and any custom rom based on them.
you can test zombie on your rom ,i think it should work without any problems because Mr.sl rom is also based on stock 5.1.1 (.228).
Click to expand...
Click to collapse
I install the zombie kernel but Phone isn't working. After then; I installed the my backup.
ProPeace said:
I install the zombie kernel but Phone isn't working. After then; I installed the my backup.
Click to expand...
Click to collapse
then maybe you should choose between them : DT2W or Mr.sl rom
mrp1375 said:
then maybe you should choose between them : DT2W or Mr.sl rom
Click to expand...
Click to collapse
You are right
Related
I like UltimatumXY -b2- ROM a lot. HALO and PIE features are really cool but I don't know how to setup zRam. Can anybody help me with that???
There is no options in settings>Performance like cyanogenmod and I've tried Terminal Emulator like so:
Code:
$ su
# zram enable
sh: zram: not found
#
Is there any other way to do it? Or is this feature not supported?
bittu.anni said:
I like UltimatumXY -b2- ROM a lot. HALO and PIE features are really cool but I don't know how to setup zRam. Can anybody help me with that???
There is no options in settings>Performance like cyanogenmod and I've tried Terminal Emulator like so:
Code:
$ su
# zram enable
sh: zram: not found
#
Is there any other way to do it? Or is this feature not supported?
Click to expand...
Click to collapse
If it's not there, it's not supported
A custom kernel may fix this if you really want zram
thunderserpent said:
If it's not there, it's not supported
A custom kernel may fix this if you really want zram
Click to expand...
Click to collapse
Can you suggest some other kernel for Galaxy S I9000 which supports zRam? I tried searching but could not find any.
bittu.anni said:
Can you suggest some other kernel for Galaxy S I9000 which supports zRam? I tried searching but could not find any.
Click to expand...
Click to collapse
devil kernel have zram....it is awesome kernel...you can activate zram with devil tools app. and stock CM kernel also
medovici said:
devil kernel have zram....it is awesome kernel...you can activate zram with devil tools app. and stock CM kernel also
Click to expand...
Click to collapse
I'll try devil kernel. But do you know how to get the CM kernel separately (not with ROM image as I want to use this xylon based ultimatumXY -b2- ROM)?
bittu.anni said:
I'll try devil kernel. But do you know how to get the CM kernel separately (not with ROM image as I want to use this xylon based ultimatumXY -b2- ROM)?
Click to expand...
Click to collapse
Only way is to extract it from cm zip and flash via odin. But,in my opinion, devil kernel is better,faster and very smooth. and you can find flashable zip here on xda in development section(last one is from 24/6/2013). In OP you have devil tool app also. I hope this helps
http://forum.xda-developers.com/showthread.php?t=2289159 this is link for tread
and if you like ultymatum rom and features....try carbon unofficial rom by aways,you will have halo,pie and even ribbons from aokp(i prefer ribbons over pie).also with devil kernel
medovici said:
Only way is to extract it from cm zip and flash via odin. But,in my opinion, devil kernel is better,faster and very smooth. and you can find flashable zip here on xda in development section(last one is from 24/6/2013). In OP you have devil tool app also. I hope this helps
http://forum.xda-developers.com/showthread.php?t=2289159 this is link for tread
Click to expand...
Click to collapse
I found that link and flashed latest devil's kernel. Till now everything is smooth and very responsive. Really fast and feature full kernel. Though I found Devil Kernel manager better than DevilTools apk given in the thread.
bittu.anni said:
I found that link and flashed latest devil's kernel. Till now everything is smooth and very responsive. Really fast and feature full kernel. Though I found Devil Kernel manager better than DevilTools apk given in the thread.
Click to expand...
Click to collapse
Yes it is,but sometimes after reboot settings return to default. That's why i prefer devil tools.
I would use doomkernel or nk kernel with a rom , but i don't know which roms support these kernel. Thank you.
saracerno said:
I would use doomkernel or nk kernel with a rom , but i don't know which roms support these kernel. Thank you.
Click to expand...
Click to collapse
Any rom based on stock
Be careful with compatibilities... or you will get bootloops.
istux said:
Any rom based on stock
Be careful with compatibilities... or you will get bootloops.
Click to expand...
Click to collapse
For example i have omnirom . i could change the kernel ?? I need this to add some cpu governor .
saracerno said:
For example i have omnirom . i could change the kernel ?? I need this to add some cpu governor .
Click to expand...
Click to collapse
No, omnirom is a custom rom with its own kernel.
Every rom you find in original development section is NOT from Sony.
To use Doomkernel you must use a rom from normal development section, where you can find roms BASED on original Sony firmware. For example ultimate pureXT...
Hey,
Whenever I try to flash another kernel which is required to flash a new rom to my SP, everything works just fine. Except that when I finish the flashing and boot up to the ROM, the screen seems to flicker a lot...
I tried turning auto brightness off, flashing another compatible kernel, and flashing a couple of scripts that claimed to fix the issue...
I am currently at the stock firmware, rooted and with unlocked bootloader.
What is weird is, when I flash the stock 12.1.A.1.205 firmware back...the screen stops flickering.
Any ideas?
Thanks in advance
LoizosAristides said:
Hey,
Whenever I try to flash another kernel which is required to flash a new rom to my SP, everything works just fine. Except that when I finish the flashing and boot up to the ROM, the screen seems to flicker a lot...
I tried turning auto brightness off, flashing another compatible kernel, and flashing a couple of scripts that claimed to fix the issue...
I am currently at the stock firmware, rooted and with unlocked bootloader.
What is weird is, when I flash the stock 12.1.A.1.205 firmware back...the screen stops flickering.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
it is bug cm11 kernel. (cm kernel based 12.1.A.0.266 kernel …=> flickeris bug
win32r said:
it is bug cm11 kernel. (cm kernel based 12.1.A.0.266 kernel …=> flickeris bug
Click to expand...
Click to collapse
It's not only the cm11 kernel, other kernels like DooMLoRD kernel, which is based on the stock fw also has this problem..
Are you saying that I use a lower firmware kernel on a newer firmware?
LoizosAristides said:
It's not only the cm11 kernel, other kernels like DooMLoRD kernel, which is based on the stock fw also has this problem..
Are you saying that I use a lower firmware kernel on a newer firmware?
Click to expand...
Click to collapse
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug
win32r said:
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug
Click to expand...
Click to collapse
Oh I didn't know that it's based on the .266
Thanks man, I hope Williams kernel works
win32r said:
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug
Click to expand...
Click to collapse
Ok so I should've mentioned that my bl is unlocked...
Also, williams kernel v7 is for 4.3...
I'm trying to flash cm11, for cm11 there's williams kernel v4...
I tried both the stock cm11 kernel and williams one and they both gave me flickering screen...
Any other ideas?
LoizosAristides said:
Any other ideas?
Click to expand...
Click to collapse
add to build.prop this lines:
Code:
# System property for cabl
ro.qualcomm.cabl=0
win32r said:
add to build.prop this lines:
Code:
# System property for cabl
ro.qualcomm.cabl=0
Click to expand...
Click to collapse
Can you tell me what does it do?
LoizosAristides said:
Can you tell me what does it do?
Click to expand...
Click to collapse
It is fix flikers bug! :laugh:
win32r said:
It is fix flikers bug! :laugh:
Click to expand...
Click to collapse
Hmm I'll try it tomorrow
Thanks for helping me dude...
Forget it)
win32r said:
Forget it)
Click to expand...
Click to collapse
Ok so I tested it out today...and it doesn't work
I am now convinced that it's a kernel problem, since I tried a lot of different versions of cm11, but I also used 4 different kernels, each one at the latest version, NOTHING!
Any other ideas?
LoizosAristides said:
Any other ideas?
Click to expand...
Click to collapse
Hm... I don't know..=( sorry
I tried to write in support of the CM. But the answer is no.
win32r said:
Hm... I don't know..=( sorry
I tried to write in support of the CM. But the answer is no.
Click to expand...
Click to collapse
That's ok...
Thanks for your time anyway
As win32r said, you should try a cm11 based ROM but for locked bootloader (they work for ubl too). With these roms you can use a kernel based on stock ( for example stock kernel or Williams kernel Sony version) which should fix your issue.
All roms that are for LBL will work with the stock kernel or Williams kernel v7. I wrote something about this in the Williams kernel website : http://williams-kernel.tk/help.php and I'll probably write this info on xda too if I have some time.
Wow. Apparently, your kernel is the only one that that doesn't give me a flickering screen
I tried an unofficial cm11 build along with it and it worked like a charm!
I just can't thank you both enough...
Finally I got a fully working cm11 on my SP
Hey guys, since there are new AOSP based ROMs around, I decided to help you guys get Boeffla on these AOSP based ROMs.
NOTE: These are builds by @Lord Boeffla, I just extract the zImage and put it in a Anykernel zip
Downloads: https://basketbuild.com/devs/Alectradar/Kernel/i9300
Source: https://github.com/andip71/boeffla-kernel-cm-s3/tree/ng_boeffla12.0
AnyKernel source: https://github.com/Alectradar/boeffla_samsung_i9300_Anykernel
nice.. thanks..
2 questions..
aosp rom is like omnirom, pa rom and nameless rom? and does it support cm12 based rom too?
cangcan said:
nice.. thanks..
2 questions..
aosp rom is like omnirom, pa rom and nameless rom? and does it support cm12 based rom too?
Click to expand...
Click to collapse
Yep, it will work with any 5.0+ ROM.
This works with 5.1.1 Nameless?
Sent for the sweetest Lollipop'd SGS3 i9300
TheTurbanater1298 said:
This works with 5.1.1 Nameless?
Sent for the sweetest Lollipop'd SGS3 i9300
Click to expand...
Click to collapse
Yes
Gokulbalram said:
Yes
Click to expand...
Click to collapse
Awesome. Finally Bofflea kernel on better more stable ROMs. This includes boffela sound and everything works as it should compared to the real kernel?
Sent for the sweetest Lollipop'd SGS3 i9300
Other than extra comparability are there any other advantages?
Sent from my GT-I9300 using XDA Free mobile app
ng1998 said:
Other than extra comparability are there any other advantages?
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
This has the stuff as the normal Boeffla
Gokulbalram said:
This has the stuff as the normal Boeffla
Click to expand...
Click to collapse
Just for extra confirmation, does this work on omnirom 5.1.1 also and does it have the sound mod that I can use the boeffla config app to tweak?
ASVP_MSFT said:
Just for extra confirmation, does this work on omnirom 5.1.1 also and does it have the sound mod that I can use the boeffla config app to tweak?
Click to expand...
Click to collapse
Should work fine. But don't flash it after a data wipe, the first boot (after a data wipe) should be on the stock kernel.
MIUI
What about MIUI roms? Boeffla gave bootloops with miui.
Zlatan13 said:
What about MIUI roms? Boeffla gave bootloops with miui.
Click to expand...
Click to collapse
MIUI is 4.4 I don't think many kernels work with MIUI
hay which kernel should i use on blisspop 3.2. and how can I flash it
girish5233 said:
hay which kernel should i use on blisspop 3.2. and how can I flash it
Click to expand...
Click to collapse
You can flash the official kernel from Boeffla.
Gokulbalram said:
You can flash the official kernel from Boeffla.
Click to expand...
Click to collapse
Plz give me direct link
Gokulbalram said:
MIUI is 4.4 I don't think many kernels work with MIUI
Click to expand...
Click to collapse
actually it's 4.4.4 based on aosp roms if I'm not wrong.
Great thread thanks. I have a question. I installed nameless today and boeffla from this thread, if i update with tonight nightly will lose the boeffla kernel?
eldoggor said:
Great thread thanks. I have a question. I installed nameless today and boeffla from this thread, if i update with tonight nightly will lose the boeffla kernel?
Click to expand...
Click to collapse
Yes, you'll need to reflash the kernel
Thanks, man.
Gokulbalram said:
Yes, you'll need to reflash the kernel
Click to expand...
Click to collapse
Hi. I'm triying this kernel on blissPop rom but i have a issue with cifs module. I have enabled it, of course, inside boeffla app but i can't reach my directories. Please can you take a look ?
It's not first time that i have this kind of issues with previous boeffla versions (for ex. with v5.1 (stock rom) cifs module worked, with v.5.2 doesn't ).
Thanks.
NIK60 ROM 4.4.4 (QA5) I9300 PORT
HI
THIS TIME I MADE ROM KIT KAT 4.4.4 STOCK FROM I9305 ...QA5 FIRMWARE BASED-(LATEST FIRMWARE 2017)
IDEA IS ROM PURE STOCK WITH SOME LITTLE ADD IN AROMA ...LIKE 5 LAUNCHER WITH DIFF GRID
SO WE HAVE ROM WITH GOOD BATTERY USAGE AND STABLE
SO ....ROM FOR DAILY USAGE
thank to @RΞ:D¥ tester
CHANGELOG
-deknoxed and deodexed
-rooted
-QA5 fw based from
-morokernel 1.8
-bloatware Samsung apps in aroma
-Google apps in aroma
-note boot animation
-S8 boot animation
download link
https://www.mediafire.com/file/y0dup768seuj3eh/NIK60_4.4.4_QA5_i9300_AROMA.zip
credit and thank
[email protected] for kernel
[email protected] for quick launch OP http://forum.xda-developers.com/show...10&postcount=1
[email protected] - For Superuser and a bunch of things
[email protected] for Aroma Installer
Contributors
@nik60
ROM OS Version: 4.4.4 KitKat
Based On: Stock
Version Information
Status: Stable
Created 2017-11-08
Last Updated 2017-11-08
res
Waiting
Looking forward for this one too...
there is a problem with gallery : it does not work
medsalah said:
there is a problem with gallery : it does not work
Click to expand...
Click to collapse
yes
is note gallery..not work
replace SecGallery2014.apk with stock ....SecGallery2013.apk
file is in aroma/gallery/stock folder
please screenshot ...
I installed it and it works very well. thanks nik60
hi dev.. can i use boeffla kernel in this rom?
also an you provide screen shots as well
i really wanna try this rom..
thanks
rom~addict5555 said:
hi dev.. can i use boeffla kernel in this rom?
also an you provide screen shots as well
i really wanna try this rom..
thanks
Click to expand...
Click to collapse
hi
yes boeffla 7.9 work --tested
and arter kernel work-tested
i think all kernels for 4.4.4 work
kernel test by @RΞ:D¥ thank to him
rom~addict5555 said:
hi dev.. can i use boeffla kernel in this rom?
also an you provide screen shots as well
i really wanna try this rom..
thanks
Click to expand...
Click to collapse
hi
yes boeffla 7.9 work --tested
and arter kernel work-tested
i think all kernels for 4.4.4 work
kernel test by @RΞ:D¥ thank to him
rom~addict5555 said:
hi dev.. can i use boeffla kernel in this rom?
also an you provide screen shots as well
i really wanna try this rom..
thanks
Click to expand...
Click to collapse
hi
yes boeffla 7.9 work --tested
and arter kernel work-tested
i think all kernels for 4.4.4 work
kernel test by @RΞ:D¥ thank to him
nik60 said:
hi
yes boeffla 7.9 work --tested
and arter kernel work-tested
i think all kernels for 4.4.4 work
kernel test by @RΞ:D¥ thank to him
Click to expand...
Click to collapse
wow!thats great..
i'll be testing the rom later and report back..
thanks dev for the effort!
The Best TouchWiz Based ROM for i9300. Works very Smooth, no Random Reboots, Good Battery life and Performance with Boeffla Kernel (ZaneZam Builds).
Best ROM ever
Working Good till now! Just flashed a more complete keyboard with number row and its nice!
Thanks for this ROM.
@nik60
great rom! rock solid,stable and smooth..
if posible could you add 4 way reboot and flashlight/torch in the toogles..
thanks
I can,t install this rom " Zip file is corrupt" i using TWRP recovery
Finnishman said:
I can,t install this rom " Zip file is corrupt" i using TWRP recovery
Click to expand...
Click to collapse
try to redownload the rom bro.. maybe its corrupted..
or try the latest twrp.. it works just fine
@nik60 there are 2 icons of radio in the app drawer
also..could you make the radio a regular app without needing root permission if possible..
its a small bug/issue i found so far in this rom
other than that everything is fine
rom~addict5555 said:
@nik60 there are 2 icons of radio in the app drawer
also..could you make the radio a regular app without needing root permission if possible..
its a small bug/issue i found so far in this rom
other than that everything is fine
Click to expand...
Click to collapse
Yes
One is stock radio fm ..is aroma choice
Lte device not have radio fm ..so it don't work..no sound...i putted It for test and fix
Other is mod radio fm..spirit...need root
You can delete stock radio...Is hibryd.apk..in system\app
Other radio fm..spirit is in data/app..not work as system/app..