i tried MBM-CI_4.3 and flackflash
that i can not unbrick this phone
how i can do it please
E:\moto\MBM-CI_4.3>.\qboot.exe blank-flash
< waiting for device >
opening device: \\.\COM44
OKAY [ 0.003s]
greeting device for command mode
OKAY [ 0.001s]
identifying device
...serial = 0x67809E4
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.006s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.004s]
validating files
OKAY [ 0.482s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.002s]
sending programmer
OKAY [ 0.012s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
my original firmware is 4.4.4
after my phone is bricked i cannot us method for unbrick with use MBM-CI_4.3 or flackflash
i tried 4.4.2 , 4.3 4.4.4 not unbrick
allwayse message FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet) and exit program
allwayse black screen driver Qualcomm HS-USB QDLoader 9008
not enter in recover
help me please
tks
yours post is a little confuse.
try to flash a xml ROM the one for yours device via command line.
do what is described in here in the 4° post.
i cannot access in fastboot mode
E:\moto\AMXPR_XT1063_4.4.4_KXB21.85-14_cid12_CFC_SVC.xml>mfastboot.exe flash partition gpt.bin
< waiting for device >
my phone in QDLoader mode
my computer found phone with driver Qualcomm HS-USB QDLoader 9008
its bricked
i tried unbrick with blank-flash and some problem
Hello guys, I bought a motorola g6 some time ago. It was rooted. I went back to rom stock to remove root and installed it normally, but the phone updated, and after didn't turn on anymore, even pressing the power and volume buttons. It only turns on a led light when plugged into the computer.. I already followed the steps from the topic below, but my phone is G6, not G6 Plus
https://forum.xda-developers.com/g6-plus/how-to/ultimate-guide-how-to-unbrick-moto-g6-t3862927
This is the blankflash error
*** Log buffer [000001] 2019-08-17_19:01:29 ****
[ -0.000] Opening device: \\.\COM5
[ 0.002] Detecting device
[ 0.005] ...cpu.id = 154 (0x9a)
[ 0.005] ...cpu.sn = 2421618069 (0x9056f595)
[ 0.005] Opening singleimage
[ 0.052] Loading package
[ 0.056] ...filename = singleimage.pkg.xml
[ 0.058] Loading programmer
[ 0.058] ...filename = programmer.mbn
[ 0.059] Sending programmer
[ 1.063] ERROR: sahara_download()->IO error
[ 1.063] Check qboot_log.txt for more details
[ 1.063] Total time: 1.063s
[ 1.064]
[ 1.064] qboot version 3.40
[ 1.064]
[ 1.064] DEVICE {
[ 1.064] name = "\\.\COM5",
[ 1.064] flags = "0x64",
[ 1.064] addr = "0x61FE4C",
[ 1.064] sahara.current_mode = "0",
[ 1.064] api.buffer = "0x1400020",
[ 1.064] cpu.serial = "2421618069",
[ 1.064] cpu.id = "154",
[ 1.064] cpu.sv_sbl = "0",
[ 1.064] cpu.name = "MSM8953",
[ 1.064] storage.type = "eMMC",
[ 1.064] sahara.programmer = "programmer.mbn",
[ 1.064] api.bnr = "0x1345FF8",
[ 1.064] }
[ 1.064]
[ 1.064]
[ 1.064] Backup & Restore {
[ 1.064] num_entries = 0,
[ 1.064] restoring = "false",
[ 1.064] backup_error = "not started",
[ 1.064] restore_error = "not started",
[ 1.064] }
[ 1.064]
I don't know if an upgrade could damage the motherboard.
I really hope you can help me, I'm realy sad, new phone
davigiolo said:
Hello guys, I bought a motorola g6 some time ago. It was rooted. I went back to rom stock to remove root and installed it normally, but the phone updated, and after didn't turn on anymore, even pressing the power and volume buttons. It only turns on a led light when plugged into the computer.. I already followed the steps from the topic below, but my phone is G6, not G6 Plus
https://forum.xda-developers.com/g6-plus/how-to/ultimate-guide-how-to-unbrick-moto-g6-t3862927
This is the blankflash error
*** Log buffer [000001] 2019-08-17_19:01:29 ****
[ -0.000] Opening device: \\.\COM5
[ 0.002] Detecting device
[ 0.005] ...cpu.id = 154 (0x9a)
[ 0.005] ...cpu.sn = 2421618069 (0x9056f595)
[ 0.005] Opening singleimage
[ 0.052] Loading package
[ 0.056] ...filename = singleimage.pkg.xml
[ 0.058] Loading programmer
[ 0.058] ...filename = programmer.mbn
[ 0.059] Sending programmer
[ 1.063] ERROR: sahara_download()->IO error
[ 1.063] Check qboot_log.txt for more details
[ 1.063] Total time: 1.063s
[ 1.064]
[ 1.064] qboot version 3.40
[ 1.064]
[ 1.064] DEVICE {
[ 1.064] name = "\\.\COM5",
[ 1.064] flags = "0x64",
[ 1.064] addr = "0x61FE4C",
[ 1.064] sahara.current_mode = "0",
[ 1.064] api.buffer = "0x1400020",
[ 1.064] cpu.serial = "2421618069",
[ 1.064] cpu.id = "154",
[ 1.064] cpu.sv_sbl = "0",
[ 1.064] cpu.name = "MSM8953",
[ 1.064] storage.type = "eMMC",
[ 1.064] sahara.programmer = "programmer.mbn",
[ 1.064] api.bnr = "0x1345FF8",
[ 1.064] }
[ 1.064]
[ 1.064]
[ 1.064] Backup & Restore {
[ 1.064] num_entries = 0,
[ 1.064] restoring = "false",
[ 1.064] backup_error = "not started",
[ 1.064] restore_error = "not started",
[ 1.064] }
[ 1.064]
I don't know if an upgrade could damage the motherboard.
I really hope you can help me, I'm realy sad, new phone
Click to expand...
Click to collapse
I believe you can enter download mode, or fastboot mode by doing the following:
1. First of all, turn off your phone – press power button and then select “power off”.
2. The USB cord must be near you, as a connection between your device and your computer must be established at some point.
3. Press and hold the volume down button on your Moto G.
4. While pressing the mentioned key also press Power button.
5. Now connect your Moto G with your computer by plugging in the USB cable.
6. Download mode / bootloader mode should now be installed – some drivers might be installed automatically.
From here you can reflash the stock rom. As long as your bootloader is unlocked, its ALMOST impossible to hardbrick your phone.
davigiolo said:
Hello guys, I bought a motorola g6 some time ago. It was rooted. I went back to rom stock to remove root and installed it normally, but the phone updated, and after didn't turn on anymore, even pressing the power and volume buttons. It only turns on a led light when plugged into the computer.. I already followed the steps from the topic below, but my phone is G6, not G6 Plus
https://forum.xda-developers.com/g6-plus/how-to/ultimate-guide-how-to-unbrick-moto-g6-t3862927
This is the blankflash error
*** Log buffer [000001] 2019-08-17_19:01:29 ****
[ -0.000] Opening device: \.\COM5
[ 0.002] Detecting device
[ 0.005] ...cpu.id = 154 (0x9a)
[ 0.005] ...cpu.sn = 2421618069 (0x9056f595)
[ 0.005] Opening singleimage
[ 0.052] Loading package
[ 0.056] ...filename = singleimage.pkg.xml
[ 0.058] Loading programmer
[ 0.058] ...filename = programmer.mbn
[ 0.059] Sending programmer
[ 1.063] ERROR: sahara_download()->IO error
[ 1.063] Check qboot_log.txt for more details
[ 1.063] Total time: 1.063s
[ 1.064]
[ 1.064] qboot version 3.40
[ 1.064]
[ 1.064] DEVICE {
[ 1.064] name = "\.\COM5",
[ 1.064] flags = "0x64",
[ 1.064] addr = "0x61FE4C",
[ 1.064] sahara.current_mode = "0",
[ 1.064] api.buffer = "0x1400020",
[ 1.064] cpu.serial = "2421618069",
[ 1.064] cpu.id = "154",
[ 1.064] cpu.sv_sbl = "0",
[ 1.064] cpu.name = "MSM8953",
[ 1.064] storage.type = "eMMC",
[ 1.064] sahara.programmer = "programmer.mbn",
[ 1.064] api.bnr = "0x1345FF8",
[ 1.064] }
[ 1.064]
[ 1.064]
[ 1.064] Backup & Restore {
[ 1.064] num_entries = 0,
[ 1.064] restoring = "false",
[ 1.064] backup_error = "not started",
[ 1.064] restore_error = "not started",
[ 1.064] }
[ 1.064]
I don't know if an upgrade could damage the motherboard.
I really hope you can help me, I'm realy sad, new phone
Click to expand...
Click to collapse
Sahara is the g7....
What the heck are talking g6 stuff for? Wrong phone, firmware, forum, everything.
madbat99 said:
Sahara is the g7....
What the heck are talking g6 stuff for? Wrong phone, firmware, forum, everything.
Click to expand...
Click to collapse
What the heck... ??
1. G7 is called "river"
2. There isn't any Moto device which is called "sahara"
3. Sahara is a GUI tool for working with devices in Qualcomm DLOAD mode (bricked devices)!! So the "sahara_downloader" doesn't stand in any relationship to the Moto G7!!!
WoKoschekk said:
What the heck... ??
1. G7 is called "river"
2. There isn't any Moto device which is called "sahara"
3. Sahara is a GUI tool for working with devices in Qualcomm DLOAD mode (bricked devices)!! So the "sahara_downloader" doesn't stand in any relationship to the Moto G7!!!
Click to expand...
Click to collapse
Yep, I misread "Sahara"
There are some g7's called "lake(plus) and River"
My mistake.
Same problem
davigiolo said:
Hello guys, I bought a motorola g6 some time ago. It was rooted. I went back to rom stock to remove root and installed it normally, but the phone updated, and after didn't turn on anymore, even pressing the power and volume buttons. It only turns on a led light when plugged into the computer.. I already followed the steps from the topic below, but my phone is G6, not G6 Plus
https://forum.xda-developers.com/g6-plus/how-to/ultimate-guide-how-to-unbrick-moto-g6-t3862927
This is the blankflash error
*** Log buffer [000001] 2019-08-17_19:01:29 ****
[ -0.000] Opening device: \\.\COM5
[ 0.002] Detecting device
[ 0.005] ...cpu.id = 154 (0x9a)
[ 0.005] ...cpu.sn = 2421618069 (0x9056f595)
[ 0.005] Opening singleimage
[ 0.052] Loading package
[ 0.056] ...filename = singleimage.pkg.xml
[ 0.058] Loading programmer
[ 0.058] ...filename = programmer.mbn
[ 0.059] Sending programmer
[ 1.063] ERROR: sahara_download()->IO error
[ 1.063] Check qboot_log.txt for more details
[ 1.063] Total time: 1.063s
[ 1.064]
[ 1.064] qboot version 3.40
[ 1.064]
[ 1.064] DEVICE {
[ 1.064] name = "\\.\COM5",
[ 1.064] flags = "0x64",
[ 1.064] addr = "0x61FE4C",
[ 1.064] sahara.current_mode = "0",
[ 1.064] api.buffer = "0x1400020",
[ 1.064] cpu.serial = "2421618069",
[ 1.064] cpu.id = "154",
[ 1.064] cpu.sv_sbl = "0",
[ 1.064] cpu.name = "MSM8953",
[ 1.064] storage.type = "eMMC",
[ 1.064] sahara.programmer = "programmer.mbn",
[ 1.064] api.bnr = "0x1345FF8",
[ 1.064] }
[ 1.064]
[ 1.064]
[ 1.064] Backup & Restore {
[ 1.064] num_entries = 0,
[ 1.064] restoring = "false",
[ 1.064] backup_error = "not started",
[ 1.064] restore_error = "not started",
[ 1.064] }
[ 1.064]
I don't know if an upgrade could damage the motherboard.
I really hope you can help me, I'm realy sad, new phone
Click to expand...
Click to collapse
I have de same problem, only blinking led when you plug it to usb, nothing else.
Did you figure out how to solve it?
nibx said:
I have de same problem, only blinking led when you plug it to usb, nothing else.
Did you figure out how to solve it?
Click to expand...
Click to collapse
Hello dear happy owners of Moto G6 bricks.
Please, would you be so kind as to accept me into your team of elite owners of useless nutcrackers based on the Motorola Moto G6.
My XT1925-5 device was also hardbricked, after upgrading to Android 9.0 Pie and installing the latest security updates.
Also, when trying to flash the blankflash_PPS29.26 utility.bat receive
error: Sahara Download IO Error.
Email me if there are any positive results when getting a smartphone memory dump and creating a new blankflash for the latest OTA.
This is my contact email ([email protected]) if there are people willing to collaborate to write a new Blank Flash together.
ZulC_Silence said:
Hello dear happy owners of Moto G6 bricks.
Please, would you be so kind as to accept me into your team of elite owners of useless nutcrackers based on the Motorola Moto G6.
My XT1925-5 device was also hardbricked, after upgrading to Android 9.0 Pie and installing the latest security updates.
Also, when trying to flash the blankflash_PPS29.26 utility.bat receive
error: Sahara Download IO Error.
Email me if there are any positive results when getting a smartphone memory dump and creating a new blankflash for the latest OTA.
This is my contact email ([email protected]) if there are people willing to collaborate to write a new Blank Flash together.
Click to expand...
Click to collapse
Flash the latest RETAIL (PPSS29.55...) from here: https://mirrors.lolinet.com/firmware/moto/ali/official/RETAIL/ with RSD Lite 6.2.4, this happened to me days ago with a XT1925-2 RETLA and this was the way to recover it.
pdloud said:
Flash the latest RETAIL (PPSS29.55...) from here: https://mirrors.lolinet.com/firmware/moto/ali/official/RETAIL/ with RSD Lite 6.2.4, this happened to me days ago with a XT1925-2 RETLA and this was the way to recover it.
Click to expand...
Click to collapse
I do not understand, please tell me the algorithm of actions?
I have the official firmware for XT1925-5 for Android 9 Pie ,you can get SBL1 from it.bin, SingleImage.Bin.
And redo BlankFlash_from_29. 26 for my firmware version?
ZulC_Silence said:
I do not understand, please tell me the algorithm of actions?
I have the official firmware for XT1925-5 for Android 9 Pie ,you can get SBL1 from it.bin, SingleImage.Bin.
And redo BlankFlash_from_29. 26 for my firmware version?
Click to expand...
Click to collapse
I have an XT1295-2 RETLA and there is no official Pie firmware for this model, so what happened to me was that I've received an update and the OTA bricked my device, what I did was:
1.- Downloaded de latest RETAIL Pie firmware from the link I've posted before.
2.- Flashed this firmware with RSDLite (I've tried to flash it manually but no luck).
3.- Nothing else, the device booted without problems.
pdloud said:
I have an XT1295-2 RETLA and there is no official Pie firmware for this model, so what happened to me was that I've received an update and the OTA bricked my device, what I did was:
1.- Downloaded de latest RETAIL Pie firmware from the link I've posted before.
2.- Flashed this firmware with RSDLite (I've tried to flash it manually but no luck).
3.- Nothing else, the device booted without problems.
Click to expand...
Click to collapse
thank you for your answer.
ZulC_Silence said:
I do not understand, please tell me the algorithm of actions?
I have the official firmware for XT1925-5 for Android 9 Pie ,you can get SBL1 from it.bin, SingleImage.Bin.
And redo BlankFlash_from_29. 26 for my firmware version?
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/ali/official/RETRU/
XT1925-5_ALI_RETRU_9.0_PPSS29.55-37-7-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Thats the image you want to flash. As long as you can still boot into fastboot mode you can recover.
theseeker2654 said:
https://mirrors.lolinet.com/firmware/moto/ali/official/RETRU/
XT1925-5_ALI_RETRU_9.0_PPSS29.55-37-7-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Thats the image you want to flash. As long as you can still boot into fastboot mode you can recover.
Click to expand...
Click to collapse
I can 't boot in any way at all.
Fastboot doesn 't see the device.
It is only defined as Qualcomm HS-USB QDloader 9008.
Neither fastboot nor Qfill.exe does not see the device.
Here you need a working blank flash.bin, specifically for my version of the SOFTWARE (PPSS29.55-37-4-3), which will be kindly merged with Motorola's technical servers .
Otherwise, there is no way to restore the loader Chains.
I have a Motorola e5 play XT1921-6 hardbricked, and when I run the blankflash it returns the following error:
Motorola qboot utility version 3.40
[ 0.000] Opening device: \\.\COM7
[ 0.001] Detecting device
[ 0.003] ...cpu.id = 86 (0x56)
[ 0.004] ...cpu.sn = 3091640600 (0xb846b118)
[ 0.004] Opening singleimage
[ 0.119] Loading package
[ 0.129] ...filename = singleimage.pkg.xml
[ 0.133] Loading programmer
[ 0.135] ...filename = programmer.mbn
[ 0.136] Sending programmer
[ 0.216] ReadFile() failed, GetLastError()=0
[ 0.216] ERROR: sahara_download()->IO error
[ 0.217] Check qboot_log.txt for more details
[ 0.224] Total time: 0.226s
FAILED: qb_flash_singleimage()->sahara_download()->IO error
I check the qboot_log.txt and what I find is the following:
**** Log buffer [000001] 2020-07-01_12:16:19 ****
[ -0.000] Opening device: \\.\COM7
[ 0.001] Detecting device
[ 0.003] ...cpu.id = 86 (0x56)
[ 0.003] ...cpu.sn = 3091640600 (0xb846b118)
[ 0.003] Opening singleimage
[ 0.012] Loading package
[ 0.017] ...filename = singleimage.pkg.xml
[ 0.019] Loading programmer
[ 0.019] ...filename = programmer.mbn
[ 0.019] Sending programmer
[ 0.099] ReadFile() failed, GetLastError()=0
[ 0.099] ERROR: sahara_download()->IO error
[ 0.100] Check qboot_log.txt for more details
[ 0.105] Total time: 0.106s
[ 0.106]
[ 0.106] qboot version 3.40
[ 0.106]
[ 0.106] DEVICE {
[ 0.106] name = "\\.\COM7",
[ 0.106] flags = "0x64",
[ 0.106] addr = "0x61FE4C",
[ 0.106] sahara.current_mode = "0",
[ 0.106] api.buffer = "0x1558020",
[ 0.106] cpu.serial = "3091640600",
[ 0.106] cpu.id = "86",
[ 0.106] cpu.sv_sbl = "0",
[ 0.106] cpu.name = "MSM8917",
[ 0.106] storage.type = "eMMC",
[ 0.106] sahara.programmer = "programmer.mbn",
[ 0.106] api.bnr = "0x1055E00",
[ 0.106] }
[ 0.106]
[ 0.106]
[ 0.106] Backup & Restore {
[ 0.106] num_entries = 0,
[ 0.106] restoring = "false",
[ 0.106] backup_error = "not started",
[ 0.106] restore_error = "not started",
[ 0.106] }
[ 0.106]
can someone tell me what is the problem? what should I do? is there any solution for my phone?
someone help me please...
try this https://mirrors.lolinet.com/firmware/moto/james/blankflash/
Hallo Moto Users
Last few days, it was a nightmare to find some ready and working solution on hardbricked Motorola. After 5 or 6 days finally bootloader screen appeared
Just to mention - until one week ago I was just and only Samsung user for last 6-7 years. So I clearly admit I am a n00b regarding other brands/systems. (probably someone who is PRO user for ages, would solve that 'at the fly', however I digged whole entire Internet and found only ONE TIP how-to).
To be clear - below I share a link to the orginal poster of the method which resurrected my Moto - all I have done was to read, understand and follow...
https://www.reddit.com/r/MotoG/comments/k73n66
I am pretty sure this could also be a way for many Motorola models. Hope it will help someone in the future to save some valuable time (and money as the local worshops have 99% predictions that it is DEAD MOTHERBOARD signs and evidence!).
Enjoy the New Started Year Ladies and Gents!
my moto g52 is not starting (hardbrick), I tried the method informed but the flahs always gives an error
my model is xt2221-2 RETBR
LOG qboot:
*** Log buffer [000001] 2022-09-05_22:21:13 ****
[ 0.000] Opening device: \\.\COM3
[ 0.002] Detecting device
[ 0.004] ...cpu.id = 440 (0x1b8)
[ 0.004] ...cpu.sn = 233431865 (0xde9e339)
[ 0.004] Opening singleimage
[ 0.004] Loading package
[ 0.007] ...filename = pkg.xml
[ 0.008] Loading programmer
[ 0.008] ...filename = programmer.elf
[ 0.009] Sending programmer
[ 11.192] ERROR: sahara_download()->IO error
[ 11.193] Check qboot_log.txt for more details
[ 11.194] Total time: 11.195s
[ 11.194]
[ 11.194] qboot version 3.86
[ 11.194]
[ 11.194] DEVICE {
[ 11.194] name = "\\.\COM3",
[ 11.194] flags = "0x64",
[ 11.194] addr = "0x62FD54",
[ 11.194] sahara.current_mode = "0",
[ 11.194] api.buffer = "0x2BD9020",
[ 11.194] cpu.serial = "233431865",
[ 11.194] cpu.id = "440",
[ 11.194] cpu.sv_sbl = "0",
[ 11.194] cpu.name = "SM_DIVAR",
[ 11.194] storage.type = "UFS",
[ 11.194] sahara.programmer = "programmer.elf",
[ 11.194] api.bnr = "0xFF1E50",
[ 11.194] }
[ 11.194]
[ 11.194]
[ 11.194] Backup & Restore {
[ 11.194] num_entries = 0,
[ 11.194] restoring = "false",
[ 11.194] backup_error = "not started",
[ 11.194] restore_error = "not started",
[ 11.194] }
[ 11.194]
cmd message
[ 0.000] Opening device: \\.\COM3
[ 0.002] Detecting device
[ 0.004] ...cpu.id = 440 (0x1b8)
[ 0.004] ...cpu.sn = 233431865 (0xde9e339)
[ 0.004] Opening singleimage
[ 0.004] Loading package
[ 0.007] ...filename = pkg.xml
[ 0.008] Loading programmer
[ 0.008] ...filename = programmer.elf
[ 0.009] Sending programmer
[ 11.192] ERROR: sahara_download()->IO error
[ 11.193] Check qboot_log.txt for more details
[ 11.194] Total time: 11.195s
FAILED: qb_flash_singleimage()->sahara_download()->IO error