Hi.
I have lg watch urbane and they are in hard brick mode. In device manager they named "Qualcomm HS-USB QLoader 9008".
I read about QPST and etc. but I can't find factory rom to build mbn image for QPST.
Maybe someone can help me? Because Ukraine has trouble with service centers, which can repaire smartwatch.
I know this is an old thread but this is also the same error you get on the g5 sometimes and sadly the only way to use it again is to send it for repair
Sent from my LG-H830 using XDA-Developers mobile app
If you want to get rid of it, I'll gladly take it off your hand
Send me a pm if interested
Related
Just wanted to let those who have accidentally (fully)bricked their phone, like I did, know that they are repairable with the jtag methood. So instead of throwing them away a jtag is a better option.
I damaged my bootloader whilst installing rspl/hspl, the information that I was following was unclear and I to inpatiant to read it carefully. Phone was still working though after that. Few weeks later I bricked it compleatly whilst flashing the firmware, hoping to fix the broken spl.
I couldn't find anyone in my country that has a Riff box, so I just ordered one for my self. There are some skills needed, but it's fairly easy. The Riff-box flashed the phone with a standard radio and working spl, and after that I could install a Rom of my choosing. Everything is working perfectly again. The riff box can also unlock the phone and make it "super Cid" so it will accept any Rom. Even change the IMEI number, not that theres anything to gain from that.
Im not selling this box or advertising. Just wanted do let those with fully bricked phones know, that it's not compleatly over
I can also share my experiance with the Jtag, if anyone is having trouble with it. I had some troubles at first, but they all got solved.
i have HD7 with same problem,what can i do? not connected with usb on boot loader
If You have completly damaged bootloader, only JTAG can help You.
I think We shoul make some sticked thread where anyone can find someone with JTAG device in near place. What do You think abut it?
Hoping this isn't my only option, but if it is, is there anyone willing to fix mine for a nominal fee? I'm really just trying to get the darn thing working and sim unlocked so I can sell it and it is bootlooping in USB host mode...
luna_c666 said:
Hoping this isn't my only option, but if it is, is there anyone willing to fix mine for a nominal fee? I'm really just trying to get the darn thing working and sim unlocked so I can sell it and it is bootlooping in USB host mode...
Click to expand...
Click to collapse
You need a Jtag Flasher .. (like Riff mentioned above)
Dissemble the phone and solder the Jtag pins
the pinout for HD7 can be found by searching google for HTC HD7 Jtag (image search helps better)
If you cant get a Jtag Flasher or If you dont have the skill to open and solder Jtag wires .. you need to take it to a service shop for repair
luna_c666 said:
Hoping this isn't my only option, but if it is, is there anyone willing to fix mine for a nominal fee? I'm really just trying to get the darn thing working and sim unlocked so I can sell it and it is bootlooping in USB host mode...
Click to expand...
Click to collapse
If your bootloader is working then you dont need riff (for sim unlock I dont know)
you should be able to flash it with a new rom to get it fixed.
But if the bootloader is broken, hard reset doesnt work and usb host mode wont work either then I think the riff jtag option is the best solution. It will certanly sim unlock the device. But if it's the T-mobile usa version, I wouldn't want to use it on any othe network, because of their special 3G frequency. (I could be wrong) The phone will then only have 2G speed or of course WiFi at home.
If you are besed in USA, then this service could do it for you.
http://mobiletechvideos.mybigcommerce.com/htc-hd7-jtag-brick-repair/
their price is $40 plus shipping. (riff box costs $150).
I dont know them, only found them with google when I was deciding what to do about my phone.
And thought their website looked legit.
Sounds nice.
I don't want to buy a Riffbox myself, so I'm wondering... anyone in the north of sweden got one that could help? For a fee ofcourse.
Can't get SPC/ MSL on Windows Phone 8 HTC 8XT Sprint.
You should be able to call Sprint to get them, just provide the IMEI or whatever they ask for. As long as you *had* an account with them you should be fine. If you can get DM Mode running you could get it yourself.
Dial ##MFG# in the normal dialer menu and go to Diag and flip the DM Mode switch.
Drivers might get installed automatically, but I'm not sure.
not that easy
thals1992 said:
You should be able to call Sprint to get them, just provide the IMEI or whatever they ask for. As long as you *had* an account with them you should be fine. If you can get DM Mode running you could get it yourself.
Dial ##MFG# in the normal dialer menu and go to Diag and flip the DM Mode switch.
Drivers might get installed automatically, but I'm not sure.
Click to expand...
Click to collapse
more often than not, the carriers won't give you the code especially if you don't have an account. and if you had an account, you probably wouldn't need it. also once you do the ##mfg# and select diag, guess what.... it asks for the "user unlock code" which as far as i can tell, is the six digit MSL we are trying to get. so you never get to the dm mode switch.
the problem with some of the methods that i've previously used like dfs or cdma workshop is i can't get windows to recognize the phone to prompt for a diag driver or in other words it won't show up as needing the diag driver or as a port, so i can't connect it to dfs, cdma workshop etc. i can get into the bootloader screen by holding the buttons during power on and windows then looks for a "usb bldr" driver and installs the old windows mobile interface, which i thought was great at first thinking i'd set the port manually but i couldn't get the device to show up there either.
can you or anybody offer any further advice, i know this isn't a new subject to say the least and i appreciate all the good info i've gotten from you guys over the years, i always type xda at the end of my google searches because there are so many great developers here. i have an 8xt bought from an auction, its awesome, i am a page plus dealer and i activated it through the dealer portal, it went through fine, but without being able to at least change the prl, or manually program it, i can't use it! help!
sonnyboy1221 said:
more often than not, the carriers won't give you the code especially if you don't have an account. and if you had an account, you probably wouldn't need it. also once you do the ##mfg# and select diag, guess what.... it asks for the "user unlock code" which as far as i can tell, is the six digit MSL we are trying to get. so you never get to the dm mode switch.
the problem with some of the methods that i've previously used like dfs or cdma workshop is i can't get windows to recognize the phone to prompt for a diag driver or in other words it won't show up as needing the diag driver or as a port, so i can't connect it to dfs, cdma workshop etc. i can get into the bootloader screen by holding the buttons during power on and windows then looks for a "usb bldr" driver and installs the old windows mobile interface, which i thought was great at first thinking i'd set the port manually but i couldn't get the device to show up there either.
can you or anybody offer any further advice? I have an 8xt bought from an auction, its awesome, i am a page plus dealer and i activated it through the dealer portal, it went through fine, but without being able to at least change the prl, or manually program it, i can't use it! help!
Click to expand...
Click to collapse
I don't remember where I found the unlock code, but I think its in my 8XT thread.
HTC has always had their own drivers for their diagnostic modes. If you still have an 8XT with 8.0 GDR2 or 3 try installing the webserver app and using the native toast launcher on one of their apps. I would work on one of those again, but its been forever since I had mine. My only issue is that the Qualcomm Diag mode (not the power+volup) seems to be in READ_ONLY mode. I'd try a few things first, but I'd be nice if someone could donate one of their old ones, so I can work on it again.
I'd recommend the ATIV S Neo if you want to attempt to reprogram stuff, its just much easier and you can do it on the phone too.
thals1992 said:
I don't remember where I found the unlock code, but I think its in my 8XT thread.
HTC has always had their own drivers for their diagnostic modes. If you still have an 8XT with 8.0 GDR2 or 3 try installing the webserver app and using the native toast launcher on one of their apps. I would work on one of those again, but its been forever since I had mine. My only issue is that the Qualcomm Diag mode (not the power+volup) seems to be in READ_ONLY mode. I'd try a few things first, but I'd be nice if someone could donate one of their old ones, so I can work on it again.
I'd recommend the ATIV S Neo if you want to attempt to reprogram stuff, its just much easier and you can do it on the phone too.
Click to expand...
Click to collapse
can you please tell me how can i found user unlock code or application or program to find security code
Hello,
I had recently upgraded a Lumia 928 to 8.1, but was having issues with exchange email. I wanted to reflash the ROM on it (like I have done a hundred times)... but this time the app crashed and it happened early on. The phone is no longer responding to anything I do. I have tried soft resets, hard resets, etc with no luck... it seems toast. I am guessing the bootloader is hosed, is there any way for me to fix this... could a shop fix this?
One other thing to note... when I plug it into a PC I see the QHSUSB_DLOAD device with no detected driver
Thanks in advance
Andy
A Verizon Repair Center might be able to fix it. They'll most likely just give you a refurbished one though. We don't have QUALCOMM roms for any windows phones....
thals1992 said:
A Verizon Repair Center might be able to fix it. They'll most likely just give you a refurbished one though. We don't have QUALCOMM roms for any windows phones....
Click to expand...
Click to collapse
thanks for the reply, I looked it up on the nokia site it is still under warranty, so it is headed back to Nokia now. Figure they will be able to take care of it better then any Verizon store would be able to.
I bought my K20 Pro off AliExpress being advertised as the "Global Version". I later found out that this was actually a Chinese version, rooted and with a custom ROM.
Due to this fact, I was not able to use Google Pay (gave me an error "not available on rooted devices".
I thought to be clever, googled, how to re-lock the bootloader, and got to work. That done ... and without realising I just BRICKED my brand new phone.
As I did not link my device to my Mi account I had no option to unlock it the official way either.
I spent the good part of 2 days researching and trying different tools .. and I am stuck!
As far as I can see I got only these options left:
- Open up my device, do the test point thingy.. and flash via Mi Flash. (do I need an authorised account for this??) .. Since the device is glued.. I am not comfortable doing this.
- Use a deep flash EDL cable .. does this actually solve the problem? Or do I still need to open up the device?
- Try to get a refund from Ali Express and send it back as "sold as Global, but is actually chinese" .. not sure I will ever see my money back (any experience?)
- Find a phone repair shop.
Any suggestions?
Any way I can fix this without having to open up my phone?
Hi.
Your are not alone with a bricked brand new k20
I did the exact same thing for the same reason (unable to use Google pay). However even worse I knew my device was a the Chinese version. I did manage to unbrick it, but only by open (test points) it and by paying someone with an authorized edl account to connect to my pc using TeamViewer. I also managed to accidentally remove and lose some micro components from the main board that are used for the screen. So in the end I have a device with black a screen. Learned an expensive lesson to not attempt repairs when tired in the middle of the night. Good luck with yours.
Same problem
Hello,
Did you manage to unbrick the device?
asaadreh said:
Hello,
Did you manage to unbrick the device?
Click to expand...
Click to collapse
If you have bricked the phone look here for the solution
https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012/post79852687
Read it all.
You will need to open the phone and use the test point method to put the phone into EDL mode, then you can unlock and flash a ROM.
You'll see a link for s-unlock. This paid service will allow you to EDL flash without an authorised account.
forzenl said:
I bought my K20 Pro off AliExpress being advertised as the "Global Version". I later found out that this was actually a Chinese version, rooted and with a custom ROM.
Due to this fact, I was not able to use Google Pay (gave me an error "not available on rooted devices".
I thought to be clever, googled, how to re-lock the bootloader, and got to work. That done ... and without realising I just BRICKED my brand new phone.
As I did not link my device to my Mi account I had no option to unlock it the official way either.
I spent the good part of 2 days researching and trying different tools .. and I am stuck!
As far as I can see I got only these options left:
- Open up my device, do the test point thingy.. and flash via Mi Flash. (do I need an authorised account for this??) .. Since the device is glued.. I am not comfortable doing this.
- Use a deep flash EDL cable .. does this actually solve the problem? Or do I still need to open up the device?
- Try to get a refund from Ali Express and send it back as "sold as Global, but is actually chinese" .. not sure I will ever see my money back (any experience?)
- Find a phone repair shop.
Any suggestions?
Any way I can fix this without having to open up my phone?
Click to expand...
Click to collapse
Deep flash cable doesnt work on this device, i got mine bricked but now its fixed, service centers doesnt accept phones that are chinese variants if there are xiaomi service centers near you, and if you find a phone repair shop, i dont know if they could handle your problem if its not Xiaomi Authorized, you can try and open your phone using the correct tools ( heat gun or hair dryer + suction) i opened mine using only plastic playing cards and old credit card combo, if you are worried about the glue just don't when the glue reheats it will pretty much seal the phone again at 90% of the time mine was pretty dusty and is pretty sturdy as it was already dried, ( tried to pull it out using a suction tool) just follow the guides and you will not encounter any problems, also if you dont have verified account I also suggest s-unlock, its super fast and easy plus a very responsive support team backs you up if you have questions regarding their services or if you wanted to have assistance. Have a great day!
Hi,
Today I was changing the Carrier aggregation file in a SM-G970U as I did some time ago but after the filo was uploaded and phone restarted I'm getting an intermittent port reading between "Unknown" and SDM855 with blank ESN field.
The phone restarts itself from time to time and is like modem dissapear, no signal and a hang up every time I use the dialer.
Could you help me to take my phone back to life?
Thanks.
Why no one replied to help? What is happening here with the community?
@Sig20, did you fix it? The repair should be possible from EDL at least.
However it is strange that these things are done manually and not by the manufacturer?
I am appalled by the lack of proper software for these machines.
Shame on Samsung Shame shame shame.
Thank you very much for your kindness @Network_Pro .
Unfortunately I had to send the phone to repair because I couldn't fin a software to fix it myself. A forced firmware update didn't work.
Just in case how is the process to use the EDL?
The reason why I had to set the CA combos is the phone model is the US and works ok here in Chle but no Carrier aggregation. After changing the CA Combos it works.
For example like this
In the video the guy said no loader yet for the specific U version (Bit version)
However the loaders usually can be found in the tools such as Miracle tool etc. (searching with yandex reveals some information)
The repair center, did they fix it by software or they had to replace the board?