Brick after flash 6.0 from 5.1 (XT1097) - X 2014 Q&A, Help & Troubleshooting

Hello guys, i dont know what to do...
I was on 5.1 on my XT1097 and tried to manually update to 6.0 because i had TWRP/ROOT/XPOSED.
So, reading this post: http://forum.xda-developers.com/moto-x-2014/general/install-image-marshmallow-6-0-xt-1097-t3266858 i decided to get started.
Everything were flashed OK but after first reboot, my phone stays all the time in the Warning Blootloader Unlocked screen (more than 30 minutes).
Also, i flashed TWRP to flash this: http://www.htcmania.com/showthread.php?t=1118710 but TWRP shows a lot of errors as "no system found" "0mb internal storage", etc.
¿What happened? ¿What i did wrong? Please, help!

Im a f****** idiot!
Really, im an big i d i o t.
Forget it, please close this thread.

Related

[Q] {Q}Please Help me out. Stopped Flashing Eclipse 3.0 install on formatting..

Hello everybody, I am a bit new to Android, but have already owned the HTC ONE rooted unlocked it and flashed all diff good ol roms.
I switched to MOTO X and love this phone.
I really hope someone can help me out.
Since I have less than 10 posts, I cannot ask a question within the Eclipse thread.
I have rooted my Moto X and was able to flash Eclips 2.2 and loved it! When Eclipse 3.0 was released yesterday I naturally grabbed it to install.
I wiped as instructed and started to flash, it was stuck on formatting for a very long time, and dumbass me just restarted the phone.
Big mistake. Now my phone is stuck on the initial Motorola splash screen.
I cannot get into recovery, the Hboot screen tells me "Flash Failure". I tried flashing a new copy of Safestrap through the moto x toolkit, the phone tells me "invalid image size for partition recovery".
I am running a windows 7, my computer sees the phone when its in Hboot.
PLEASE PLEASE direct me to the right place to fix this.
THANKS IN ADVANCE

[Help XT1058 ATT] Bricked after flashing (Solved)

Hey guys,
I made the biggest mistake and have been trying to find a solution. Long story short, I have bricked my Moto X xt1058. I can only load into the bootloader, which is locked. When doing any kind of boot, it will pop up a Motorola logo then go to a black screen.
After a few seconds you can sometimes see a green android guy that looks like it says no command quickly flash and go away.
Now my mess up was not paying attention to the ROM I was flashing and flashing a 4.4.4 rom to a 5.1 bootloader (30.BE).
Has anyone got a solution or any help for me?
Update:
Turns out, I needed to flash a newer 5.1 than I could find before. Flashed everything from the update and my phone booted after everything.

Bricked XT1068 after failed OTA

I recently tried to install a lot of ROMs, with few success because I'm a beginner at this kind of things. I still managed to reinstall completely a stock KitKat version, and tried to do the OTA update to Lollipop. The screen turned down when the update reached approximately 60% and I can't even restart the phone in bootloader to restore with adb since. Can someone help me or is it helpless?
Same here.
I have a xt1068 and I was on MM, but after found that gps was not working properly, decided to downgrade to Lollipop.
The downgrade worked fine, but then came the OTA stagefright update notification and I tried to install it.
It was on the recovery screen, in the middle of the update, it suddenly blacked out and made no response to charging ou power button. I cant make it into bootloader, nothing. Dead.
Help!
same thing happened to me
So sad
Same here. I tried following some tutorials on bricked phones, but my pc won't even recognize the device as they say it should. Can someone help us? I'm about to go out and go to a technical support store, but I'd like to try on my own first... Someone there to help me?
http://forum.xda-developers.com/showthread.php?t=3345416

Trying to restore ROM

Hello,
A couple of days ago, i received a call and my phone just turned off. Since then, it just get stuck in the M powered by android logo. My phone is not rooted and nothing is modified since i acquired it.
I tried to reset the phone with a hard reset or reseting it to factory or recovery from bootloader, but it did not fix anything, so the last try i was doing was restoring the Stock ROM, following the steps in the following thread: https://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657/
The problem I have found is that I have tried 3 different roms for XT1068 4.4.4
RETAILDSDSALL_XT1068_4.4.4_KXB21.85-14_cid7_CFC_SVC.xml
RETAILDSDSALL_XT1068_4.4.4_KXB21.85-23_cid7_CFC.xml
RETAILDSDSALL_XT1068_4.4.4_KXB21.85-27_cid7_CFC_SVC.xml
but I have received the same error message from all of them: "invalid PIV signed system image"
could anybody try to help me with this issue? i think i am not too far to solve and fix the phone, but i dont know what else i can try.
Thank you very much in advance.
yukovski said:
Hello,
A couple of days ago, i received a call and my phone just turned off. Since then, it just get stuck in the M powered by android logo. My phone is not rooted and nothing is modified since i acquired it.
I tried to reset the phone with a hard reset or reseting it to factory or recovery from bootloader, but it did not fix anything, so the last try i was doing was restoring the Stock ROM, following the steps in the following thread: https://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657/
The problem I have found is that I have tried 3 different roms for XT1068 4.4.4
RETAILDSDSALL_XT1068_4.4.4_KXB21.85-14_cid7_CFC_SVC.xml
RETAILDSDSALL_XT1068_4.4.4_KXB21.85-23_cid7_CFC.xml
RETAILDSDSALL_XT1068_4.4.4_KXB21.85-27_cid7_CFC_SVC.xml
but I have received the same error message from all of them: "invalid PIV signed system image"
could anybody try to help me with this issue? i think i am not too far to solve and fix the phone, but i dont know what else i can try.
Thank you very much in advance.
Click to expand...
Click to collapse
What was the last OS you were using??
avrockz11 said:
What was the last OS you were using??
Click to expand...
Click to collapse
I think it was 6.0 but, is it relevant? I mean, I understood that the important data is the one that was in the phone from factory, in this case the 4.4.4
yukovski said:
I think it was 6.0 but, is it relevant? I mean, I understood that the important data is the one that was in the phone from factory, in this case the 4.4.4
Click to expand...
Click to collapse
With OTA update to Marshmallow, your bootloader too was upgraded..therefore you can't flash the KitKat version again without risking a hard brick..so try flashing a MM build.
To restore to MM,follow this thread
https://forum.xda-developers.com/moto-g-2014/general/official-firmware-titan-xt1068-t3312933

Rooted one plus 3t with corrupted recovery stuck on bootloader

Hello everyone. First of all, sorry for the long post.
I just bought a OnePlus 3t three days back. Updated it to oxygen 4.1.3 and then rooted it as well. Everything was working fine. But then I decided to downgrade to 3.5.4 since I wanted to try out Xposed Framework. So I downloaded the OS from OP Support website, and went to twrp recovery and installed the os 3.5.4 from the internal memory of the phone. It seemed to install properly but when I rebooted the phone, it started asking for a password. I tried every possible combinations of my passwords but to no avail. I saw online and found some video where I was supposed to flash a new recovery which I did. After that the phone got stuck in Bootloader. There is no bootloader and recovery version detail available on this screen.
If I try to restart the phone it gives me the following error, "Decryption Unsuccessful - Your phone storage has been damaged, unable to read data stored in your phone! To continue to use the phone, you need to reset the phone." There's a button at the bottom of the screen to Reset Phone. When I click that the phone goes back to bootloader mode.
Please help me out here. I have no clue what to do right now. I have tried flashing several recoveries but they give an error "cannot determine the image filename for abcd.img"
Any and all suggestions are welcome. Thanks in anticipation.
Bro looks like a brick device did you check this post?
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
maybe you can find the answer there, hope you can manage to fix the problem :good:
Crash said:
Bro looks like a brick device did you check this post?
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
maybe you can find the answer there, hope you can manage to fix the problem :good:
Click to expand...
Click to collapse
Thank you for the reply. I haven't yet tried it, since the computer recognises the phone just fine. It even shows up in the fastboot devices list in cmd. Maybe, I should give it a go.
Crash said:
Bro looks like a brick device did you check this post?
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
maybe you can find the answer there, hope you can manage to fix the problem :good:
Click to expand...
Click to collapse
Ok so I did manage to reinstall twrp. But I have no idea what to do next. Any suggestions ?
I managed to fix it. After the twrp recovery was installed, it started asking me for a password. Which I tried and didn't work. But then I just wiped the phone and it went back to factory settings somehow.
Now the phone is back to oxygen 3.5.4 and works fine.
Hope this can be helpful to someone else.
I'm glad u fixed it
Can u please post the correct steps to avoid this issue in the first place .
I'm on 3.5.4 but I may want to try latest versions and come back to 3.5.4

Categories

Resources