Database Develop

Bootloader version 3.41 problems

I had a mostly-stock Nexus 7 running 4.1.1 - unlocked, rooted, TWRP installed, but no major /system changes. When the update came in, I figured "what the heck, I'll just see if it applies - worst case I lose root and my recovery console, but it's a nexus, it's easy to get those back". I applied the update, and it worked! It applied and rebooted, worked fine - but it did lose root and recovery as I expected.
So I tried to get recovery back. It won't come back. Here are the ways I tried:
Hold down VolUp+VolDown+Power to get to fastboot mode. Ran
Code:
fastboot boot recovery.img
(using a number of different copies of both clockwork and TWRP recovery). Each time, the screen went black, google logo came up, but then it booted to AndroidOS
Tried to do
Code:
fastboot flash recovery recovery.img
The flash seemed to look like it did fine, but when I selected "Boot Recovery", it didn't. It booted Android OS
I can get into STOCK recovery using the normal method of selecting it from the menu just fine.
Stock recovery doesn't have ADB running. Fastboot mode doesn't have adb running. Fastboot doesn't have any command for rebooting into recovery apart from the method I mentioned (fastboot boot recovery.img). Booting into AndroidOS reflashes the recovery console with the stock console (I tried to race it running adb reboot recovery, but lost).
I tore my hair out for hours. Nothing I tried would let me boot into a custom recovery. I eventually backed everything up as best as I could using adb (Since luckily Android OS still worked), and reflashed to stock everything. PROBLEM IS STILL HERE! Then I decide to revert the bootloader from 3.41 to 3.34. SUCCESS. 3.34 booted to recovery without any problems at all.
Any idea what the heck is going on here? Anybody else seen this? All the threads I've seen with people having problems booting into recovery end with somebody suggesting "Just get app xyz that will reboot into recovery" - but that is NOT an option if A). you cannot get it to boot or B). you are not rooted/are running stock, because you can't be in AndroidOS and still have the custom recovery flashed UNTIL you are able to get into recovery to actually fix it.
Here's a video of me trying to flash recovery, since nobody will believe me that it doesn't work. Turn off the audio, the bell noise is obnoxious, sorry.
http://www.youtube.com/watch?v=zhHWiu7pO34

I brought up the same concerns when I did a manual flash to 4.1.2 and went through a mess eventually reverting to 4.1.1, using OTA rootkeeper than updating again because on bootloader 3.41 *NO* custom recoveries successfully boot.

how do you flash the old bootloader? if you don't mind me asking.

I have been on boot loader 3.41 for a few days and no issues with twrp. I have flashed a few things since and all is good? Sorry not sure why its not working for some.

ls3c6 said:
I brought up the same concerns when I did a manual flash to 4.1.2 and went through a mess eventually reverting to 4.1.1, using OTA rootkeeper than updating again because on bootloader 3.41 *NO* custom recoveries successfully boot.
Click to expand...
Click to collapse
Huh? I have 3.41 and can go from bootloader to recovery with no problems. Even got a video of it if you don't believe me
Sent from my Galaxy Nexus

You are not alone in this issue, me too, and others more, http://forum.xda-developers.com/showthread.php?t=1932063

I update to 4.1.2 using CWM, didn't lose root. Then changed back to TWRP 2.2.2.0 with bootloader 3.41, now I just updated to TWRP 2.2.3. Everything went smooth even though I'm android noobie.

anotherxyz said:
how do you flash the old bootloader? if you don't mind me asking.
Click to expand...
Click to collapse
Code:
fastboot flash bootloader bootloader-3.34-grouper.img
(or whatever the actual filename is). Then you do:
Code:
fastboot reboot-bootloader
You should at that point see the correct version listed in fastboot
masully84 said:
Huh? I have 3.41 and can go from bootloader to recovery with no problems. Even got a video of it if you don't believe me
Click to expand...
Click to collapse
I think the issue comes from going back to stock recovery without a rooted AndroidOS. Either one by itself seems to be fine. If you still have the CWR or TWRP recovery already flashed, 3.41 can boot to that. If you have root in AndroidOS, you can always re-flash recovery from ROM Manager or something, and that will work fine. And you can boot to recovery from Android OS (so long as you have root).
If you have stock recovery and no root, your only option is fastboot. And that fastboot flash and boot commands do not work. They look like they work - but they don't. So if you already HAVE a custom recovery, it probably won't even break it.
If you really want to do a proper test / prove this, go back to stock recovery with 3.41. Turn the tablet off completely. Boot up holding the three buttons and go into recovery to see that it can go into the stock recovery console. Then reboot with the three buttons again (don't boot AndroidOS), and run the fastboot boot command to run a custom recovery. If that works, I'll eat my hat.
(well, really all that means is that the problem isn't occurring on all systems. Doesn't mean it's not happening to me and many others)
The problem might not be that 3.41 can't boot to recovery -it might just be that 3.41 can't FLASH or BOOT a recovery console through fastboot. Many people will never notice that because:
A). They already have a recovery console flashed, so it still works
B). They flash their recovery from ROM Manager, GooManager, or whatever
If you lose root, you no longer have B as an option. If you also lose your recovery console, you can't get root access back without fastboot, so you have to use fastboot.

Se7enLC said:
Code:
I think the issue comes from going back to stock recovery without a rooted AndroidOS. Either one by itself seems to be fine. If you still have the CWR or TWRP recovery already flashed, 3.41 can boot to that. If you have root in AndroidOS, you can always re-flash recovery from ROM Manager or something, and that will work fine. And you can boot to recovery from Android OS (so long as you have root)[...]
[/QUOTE]
Not sure you've got it right. At least on my N7. My first try was flashing the update.zip in another thread without updating my ROM at all. Running Paranoid Android (2.1799 then) and TWRP. Not sure when in the mix I updated TWRP though.
Thought it might have been a problem with the update.zip, so downloaded the full update.zip from google and tried installing bootloader*.img from that via fastboot.
No change. Reverted to 3.34 without any playing around with deleting files and all is good.
Click to expand...
Click to collapse

Se7enLC said:
I had a mostly-stock Nexus 7 running 4.1.1 - unlocked, rooted, TWRP installed, but no major /system changes. When the update came in, I figured "what the heck, I'll just see if it applies - worst case I lose root and my recovery console, but it's a nexus, it's easy to get those back". I applied the update, and it worked! It applied and rebooted, worked fine - but it did lose root and recovery as I expected.
So I tried to get recovery back. It won't come back. Here are the ways I tried:
Hold down VolUp+VolDown+Power to get to fastboot mode. Ran
Code:
fastboot boot recovery.img
(using a number of different copies of both clockwork and TWRP recovery). Each time, the screen went black, google logo came up, but then it booted to AndroidOS
Tried to do
Code:
fastboot flash recovery recovery.img
The flash seemed to look like it did fine, but when I selected "Boot Recovery", it didn't. It booted Android OS
I can get into STOCK recovery using the normal method of selecting it from the menu just fine.
Stock recovery doesn't have ADB running. Fastboot mode doesn't have adb running. Fastboot doesn't have any command for rebooting into recovery apart from the method I mentioned (fastboot boot recovery.img). Booting into AndroidOS reflashes the recovery console with the stock console (I tried to race it running adb reboot recovery, but lost).
I tore my hair out for hours. Nothing I tried would let me boot into a custom recovery. I eventually backed everything up as best as I could using adb (Since luckily Android OS still worked), and reflashed to stock everything. PROBLEM IS STILL HERE! Then I decide to revert the bootloader from 3.41 to 3.34. SUCCESS. 3.34 booted to recovery without any problems at all.
Any idea what the heck is going on here? Anybody else seen this? All the threads I've seen with people having problems booting into recovery end with somebody suggesting "Just get app xyz that will reboot into recovery" - but that is NOT an option if A). you cannot get it to boot or B). you are not rooted/are running stock, because you can't be in AndroidOS and still have the custom recovery flashed UNTIL you are able to get into recovery to actually fix it.
Here's a video of me trying to flash recovery, since nobody will believe me that it doesn't work. Turn off the audio, the bell noise is obnoxious, sorry.
http://www.youtube.com/watch?v=zhHWiu7pO34
Click to expand...
Click to collapse
Found the solution to the the issue (sorta), I too went through all this trouble as you did in your OP.
I did not have to do anything other then straight up flash this version "recovery-clockwork-touch-6.0.1.5.b8147-grouper.img" via fastboot and bam! recovery works. Link - http://forum.xda-developers.com/showpost.php?p=32810167&postcount=228
Problem is with previous versions of 6.0.1.0 (Official) and TWRP 2.3.1
I still prefer TWRP, but hey This is better then the alternative (No recovery at all)
Now we need to figure out what changed between CWM 6.0.1.0 and 6.0.1.5 and get the other guys (TWRP) to fix their **** for us poor saps that seem to be a minority in the Nexus 7 world having this issue.
I would love to know what actually the fix is and why only some have these issues with older versions of CWM and TWRP.

TWRP not sticking

Just used NRT to flash the nougat factory image downloaded from image website. Everything worked great, phone is up and running. tried using NRT to flash just TWRP without root or anything else and it completes and I'm able to get into it once its done (sitting in fastboot, up to recovery, power button to enter). once I boot into android I power off and hold Vdown and power and get fastboot, go to recovery, press power, phone reboots and gives me android guy with red triangle... any idea what is going on?

icedclown said:
Just used NRT to flash the nougat factory image downloaded from image website. Everything worked great, phone is up and running. tried using NRT to flash just TWRP without root or anything else and it completes and I'm able to get into it once its done (sitting in fastboot, up to recovery, power button to enter). once I boot into android I power off and hold Vdown and power and get fastboot, go to recovery, press power, phone reboots and gives me android guy with red triangle... any idea what is going on?
Click to expand...
Click to collapse
I've read a lot of threads recently that say TWRP won't stick unless you root your phone. I've always rooted my phone after installing TWRP so I can't verify that this is true, but again, a lot of threads are saying that it's so.

alryder said:
I've read a lot of threads recently that say TWRP won't stick unless you root your phone. I've always rooted my phone after installing TWRP so I can't verify that this is true, but again, a lot of threads are saying that it's so.
Click to expand...
Click to collapse
you need to delete a recovery-from-boot file in system. or itll keep getting rid of twrp after a reboot.

simms22 said:
you need to delete a recovery-from-boot file in system. or itll keep getting rid of twrp after a reboot.
Click to expand...
Click to collapse
This is assuming you are running a modified boot.img (unencrypted, etc), no?

yes the recovery from boot file. If you allow TWRP to write system partition it will rename this file to .bak.

Str8gahbidge said:
yes the recovery from boot file. If you allow TWRP to write system partition it will rename this file to .bak.
Click to expand...
Click to collapse
Nice, a clear explanation that explains why so many dont have this issue. Like me. When I flash recovery I boot TWRP and delete a few keyboards... so yea I have mounted system writable.

I had the same issue. flashed TWRP several times, never could boot into recovery. rooting worked fine though. I went ahead and installed the TWRP installer/updater from the Google Play store and installed it from there. worked like a charm....

TWRP Install Being Rejected??

Hello,
I am new to this forum, but have done a bit of unlocking and installing custom roms on other phones (mostly OPO's, both my old one and friends). But this new OP 3T I just got is giving me some troubles I have not encountered before. I would LOVE to put this into the correct forum, but of course with my being new to this forum...rules...
I am following the standard install over on the TWRP site and on the OP3T, the install finishes and then I reboot and I get a screen that says:
"Your device has been unlocked and can't be trusted. If you don't want to see this screen, please lock your device by "fastboot oem lock" an erase userdata..."
I have never seen this before. Can someone give me a idea what could be going on here? Do I need to re-lock it? What did OP do to their phones!!?!
Oh and also, I am planning on installing LineageOS. Any reason I shouldn't?
Thanks!

Blenderite said:
Hello,
I am new to this forum, but have done a bit of unlocking and installing custom roms on other phones (mostly OPO's, both my old one and friends). But this new OP 3T I just got is giving me some troubles I have not encountered before. I would LOVE to put this into the correct forum, but of course with my being new to this forum...rules...
I am following the standard install over on the TWRP site and on the OP3T, the install finishes and then I reboot and I get a screen that says:
"Your device has been unlocked and can't be trusted. If you don't want to see this screen, please lock your device by "fastboot oem lock" an erase userdata..."
I have never seen this before. Can someone give me a idea what could be going on here? Do I need to re-lock it? What did OP do to their phones!!?!
Oh and also, I am planning on installing LineageOS. Any reason I shouldn't?
Thanks!
Click to expand...
Click to collapse
Is nothing wrong with your device ..What you get is a warning that your bootloader is unlocked ...
You gonna get this every time you want to boot to your ROM or to twrp....
You can proceed further to install any ROM that you like...
I think you can find a guide on XDA forums to disable this warning if you want...

cultofluna said:
Is nothing wrong with your device ..What you get is a warning that your bootloader is unlocked ...
You gonna get this every time you want to boot to your ROM or to twrp....
You can proceed further to install any ROM that you like...
I think you can find a guide on XDA forums to disable this warning if you want...
Click to expand...
Click to collapse
Ok I tried that and a new problem came up!! When I try to reboot into recovery, I do not get TWRP, but the stock recovery that was there originally! Unless they have completely changed the look of TWRP. I will try to upload a picture of it if that helps.

You can't get rid of the bootloader-unlocked warning without re-locking your bootloader, which you really should not do while you have a custom recovery installed.
Are you sure you've flashed TWRP and not just booted it it from a local file on your computer? Try using fastboot to wipe recovery first before flashing TWRP.

Anova's Origin said:
You can't get rid of the bootloader-unlocked warning without re-locking your bootloader, which you really should not do while you have a custom recovery installed.
Are you sure you've flashed TWRP and not just booted it it from a local file on your computer? Try using fastboot to wipe recovery first before flashing TWRP.
Click to expand...
Click to collapse
I followed the Fastboot method on this page (rules won't let me post the link normally): twrp. me/devices/oneplus3t.html

Blenderite said:
I followed the Fastboot method on this page (rules won't let me post the link normally): twrp. me/devices/oneplus3t.html
Click to expand...
Click to collapse
Right on that page (last paragraph of fastboot install method), you will see:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I had a heck of a time with this myself (even reading the above). Even rebooting (after flash TWRP) to recovery (power+vol down), the TWRP install would still not "stick". Had to try multiple times. I also rooted with SuperSU 2.79 at some point in that process, which may or may not have helped TWRP to finally "stick".

redpoint73 said:
Right on that page (last paragraph of fastboot install method), you will see:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I had a heck of a time with this myself (even reading the above). Even rebooting (after flash TWRP) to recovery (power+vol down), the TWRP install would still not "stick". Had to try multiple times. I also rooted with SuperSU 2.79 at some point in that process, which may or may not have helped TWRP to finally "stick".
Click to expand...
Click to collapse
I tried this once before, but after your suggestion to try it several times, it finally worked! Thanks!!

Flash TWRP, reboot, press the volume down key before the phone boots, go into recovery, you should see TWRP flash screen, that usually works but I'm glad you got it going

Cant Flash back to MR1 from MR2 to get arter, magisk & twrp.

I can only seem to get into fastboot mode with a Menu saying:
Restart Bootloader
Unlock Bootloader (Unlocked)
Wipe Userdata
Exit
I haven't been able to get to any download mode at all, just this menu and stock recovery, can someone please give me instructions on this? I've gotten different files and ways to root this from many different threads and I'm confused as hell.
Never rooted this RP2 before, it's on latest OTA MR2-RC001-RZR-190914.3123. Got it unlocked before and it's been unlocked for a while but didn't go further with rooting because I got confused and didn't want to brick my expensive phone. Last phone I rooted was back on kitkat or lollipop before I switched to iPhone, so I'm not a total noob just rusty. But Razer got me back to Android and it''s changed alot. I need detailed advice please. :good: And if my instinct is telling me correctly I'd assume something is changed about the bootloader in MR2 thats affecting me right now?

That menu is the bootloader/download mode.

DarkestSpawn said:
That menu is the bootloader/download mode.
Click to expand...
Click to collapse
My issue was not having Bootloader interface installed. Fixed

MarkusGingles said:
My issue was not having Bootloader interface installed. Fixed
Click to expand...
Click to collapse
Have you unlocked critical partition?
https://developer.razer.com/razer-p...6.1692205032.1582602359-1206928491.1581902985
Razer recommends you use a USB 3 Type-A to Type-C spec-compliant cable for any device flashing.
THE CABLE THAT CAME WITH THE PHONE WILL NOT WORK.
If you have everything unlocked then make sure you do this
https://s3.amazonaws.com/cheryl-fac...stall_Android_Fastboot_Drivers_on_Windows.pdf
Or install using this tool
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
If you make it this far then it's a matter of typing in the correct path in fastboot.
fastboot flash boot "arter97 name here".img
Then from the fastboot menu scroll down to boot to recovery or type fastboot reboot recovery
TWRP should boot if you installed the correct kernel.
In TWRP hit cancel then swipe to make modifications and install magisk 20.3
Profit

JDBarlow said:
Have you unlocked critical partition?
https://developer.razer.com/razer-p...6.1692205032.1582602359-1206928491.1581902985
Razer recommends you use a USB 3 Type-A to Type-C spec-compliant cable for any device flashing.
THE CABLE THAT CAME WITH THE PHONE WILL NOT WORK.
If you have everything unlocked then make sure you do this
https://s3.amazonaws.com/cheryl-fac...stall_Android_Fastboot_Drivers_on_Windows.pdf
Or install using this tool
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
If you make it this far then it's a matter of typing in the correct path in fastboot.
fastboot flash boot "arter97 name here".img
Then from the fastboot menu scroll down to boot to recovery or type fastboot reboot recovery
TWRP should boot if you installed the correct kernel.
In TWRP hit cancel then swipe to make modifications and install magisk 20.3
Profit
Click to expand...
Click to collapse
Okay so I couldn't flash anything originally simply because i didn't have Bootloader Interface installed. Figured that out and had everything working, unlocked, Arter Kernel 12, Magisk 20.3, EdXposed, and now after I edited build.prop to enable my regular hotspot without carrier permission and reboot. Well now I really can't flash sh?t. Even though I can get into bootloader & Recovery, when I try to fastboot flash MR1 Stock or MR2 stock just to get back into the phone it freezes on the razer logo and eventually reboots and repeats. Then i have to Reflash arter to get back into TWRP after I try to flash anything else which otherwrites Arter97.img. Finally read the red text in TWRP and /data was refusing to mount, fixed that by a basic ass wipe (DUH) Hoping that might have been the issue, my data folder was corrupt or my old data folder was mismatching with the rest of the new roms i tried to flash? Idk someone smarter plz tell me. So far my next attempt is going to be downloading a flashable Stock Deodoxed ZIP to see if flashing from within TWRP now that /Data will mount makes a difference compared to Fastboot. Tried fastboot flashing MR1 and MR2 Normal Razer Stock Rom after data remounted and now i can get to the green vortex/visualizer screen instead of just the Razer Logo before it STILL loops and then when it loops again a second time it sends me to TWRP automatically.

MarkusGingles said:
Okay so I couldn't flash anything originally simply because i didn't have Bootloader Interface installed. Figured that out and had everything working, unlocked, Arter Kernel 12, Magisk 20.3, EdXposed, and now after I edited build.prop to enable my regular hotspot without carrier permission and reboot. Well now I really can't flash sh?t. Even though I can get into bootloader & Recovery, when I try to fastboot flash MR1 Stock or MR2 stock just to get back into the phone it freezes on the razer logo and eventually reboots and repeats. Then i have to Reflash arter to get back into TWRP after I try to flash anything else which otherwrites Arter97.img. Finally read the red text in TWRP and /data was refusing to mount, fixed that by a basic ass wipe (DUH) Hoping that might have been the issue, my data folder was corrupt or my old data folder was mismatching with the rest of the new roms i tried to flash? Idk someone smarter plz tell me. So far my next attempt is going to be downloading a flashable Stock Deodoxed ZIP to see if flashing from within TWRP now that /Data will mount makes a difference compared to Fastboot. Tried fastboot flashing MR1 and MR2 Normal Razer Stock Rom after data remounted and now i can get to the green vortex/visualizer screen instead of just the Razer Logo before it STILL loops and then when it loops again a second time it sends me to TWRP automatically.
Click to expand...
Click to collapse
Have you tried the format data partition ?

MarkusGingles said:
Okay so I couldn't flash anything originally simply because i didn't have Bootloader Interface installed. Figured that out and had everything working, unlocked, Arter Kernel 12, Magisk 20.3, EdXposed, and now after I edited build.prop to enable my regular hotspot without carrier permission and reboot. Well now I really can't flash sh?t. Even though I can get into bootloader & Recovery, when I try to fastboot flash MR1 Stock or MR2 stock just to get back into the phone it freezes on the razer logo and eventually reboots and repeats. Then i have to Reflash arter to get back into TWRP after I try to flash anything else which otherwrites Arter97.img. Finally read the red text in TWRP and /data was refusing to mount, fixed that by a basic ass wipe (DUH) Hoping that might have been the issue, my data folder was corrupt or my old data folder was mismatching with the rest of the new roms i tried to flash? Idk someone smarter plz tell me. So far my next attempt is going to be downloading a flashable Stock Deodoxed ZIP to see if flashing from within TWRP now that /Data will mount makes a difference compared to Fastboot. Tried fastboot flashing MR1 and MR2 Normal Razer Stock Rom after data remounted and now i can get to the green vortex/visualizer screen instead of just the Razer Logo before it STILL loops and then when it loops again a second time it sends me to TWRP automatically.
Click to expand...
Click to collapse
Will it not let you flash stock using flash_all.bat file while in fastboot mode?
I would definitely try and start over for sure if possible

Moto G7+ Flashing Lineage fails -> Touch doesn't work anymore - Brick?

Hello guys!
Yesterday I tried to flash the newest Lineage-built to my new G7+ (XT1965-3, bought in Germany via Amazon), but something went wrong and now I'm afraid, I bricked my phone.
It's not my first flash of Lineage, as I did this in the past already on some older Phones (SII, SIII, S5), but it's the first time, that I have a major issue.
So I followed all the steps on the Lineage-Wiki (on Win10).
After flashing the recovery (the lineage-recovery, not TWRP) I wasn't able to enter the recovery-mode, so the phone booted to StockRom. And probably this was the problem: As it didn't react to VolumeDown+Power, I reflashed the recovery a second time. After that the touch-screen is not working any more.
I am able to enter the recovery-mode and I can boot to Stock-Rom, but in both modes the phone does not react to touch, so I can only use the Volume- and Power-Buttons.
Probably I made more mistakes after that: I thought, that a factory-reset would help, but It didn't. I also relocked the bootloader, but as I saw, that it also did not bring any solution, I unlocked it a second time.
Conclusion: I have a brand new phone, with lineage-recovery, an unlocked bootloader but without touch working.
I also tried to flash Lineage, but the sideload got stuck at 47%. So Lineage is not installed and it boots into Stock, where I can not get any further without touch.
Has anyone any idea, what could be the issue and how I can fix it? I would like to start from scratch, but I don't know, what is the exact problem and if i can for example return to stock recovery.
Thank you!
---- EDIT ----
If it helps: I am able to boot TWRP via "fastboot boot twrp-xxx.img". And in TWRP the touch works!
I could flash lineage directly via TWRP from external sd-card, but i am afraid that after that I won't be able to return if something goes wron.

probably your best bet is to go right back to stock using the LMSA tool and starting fresh. I've seen others encounter similar issues on different devices and always the cleaneast solution was just to role back everything and start over.

Thank you so much. With LMSA I managed to restore everything to stock and touch is working!
So I'm going to start from scratch and finally install Lineage.
Is is indicated to use the Lineage-Recovery, as the Lineage-Wiki says, or would it better to use TWRP?
TWRP gives me the option to flash from sd-card, which seems to me better than via sideload.

joglxv said:
Thank you so much. With LMSA I managed to restore everything to stock and touch is working!
So I'm going to start from scratch and finally install Lineage.
Is is indicated to use the Lineage-Recovery, as the Lineage-Wiki says, or would it better to use TWRP?
TWRP gives me the option to flash from sd-card, which seems to me better than via sideload.
Click to expand...
Click to collapse
Glad your back up and running. Take a look in the lineage thread, but it does appear most people lean towards using twrp, shouldnt have an issue with either however.

digitaljeff said:
Glad your back up and running. Take a look in the lineage thread, but it does appear most people lean towards using twrp, shouldnt have an issue with either however.
Click to expand...
Click to collapse
I'm having a similar problem. At first touch was fubar but I was able to return to stock using LMSA and now touch works. I can load TWRP with fastboot and even install a custom ROM and TWRP, but installing any custom ROM results in a boot loop during the finding and installing updates part of the phone setup during first boot. I'm tried Evolution X which I was running previously(for about a month, and then a boot loop started yesterday), PixelOS 10, and AncientOS, but all result in the boot loop on first boot after connecting to wifi.

Fixed
I fixed this somehow by manually flashing the latest stock firmware to slot a, and then extracting the evolution x Rom and manually extracting the IMG files inside and manually fastboot flashing those to slot b. I then set b as the active slot and booted up, patched the boot image with magisk, flashed that, and everything works. Not sure why twrp wouldn't do the trick.

Finally had the time to install Lineage. Now everything works.
I followed the instructions someone posted in the [ROM][OFFICIAL] LineageOS 17.1 [nightlies]-thread and the instructions of the lineage-wiki:
1. fastboot boot TWRP
2. sideload the copy-partitions.zip from lineage-wiki
3. factory reset via TWRP (wipe cache, dalvik and data)
4. sideload lineage
5. reboot bootloader
6. fastboot boot TWRP
7. sideload magisk
8. reboot system
Had a little bootloop the first time rebooting the system, but that was because I forgot to wipe data-partition in step 3. Wiping data and rebooting did it for me.
So I have a working Lineage17.1 with root via Magisk.
Thank you for the help!

I had exactly the same problem like you had. Bought a brand new moto g7 plus and after recovery flash, Touchscreen was not working anymore. I could manage to go back to the bootloader, sideloaded TWRP, but side loading lineage worked for me then. It seemed to be stuck on 47 percent, but this seems to be a normal issue, the file was there and after installing, touchscreen worked normally.