tried to flash xposed arm7 and now im stuck on the tmob boot screen, i cant get the unistaller to show in recovery, cant odin stock rom, says not ath/ fail im running stock mm 6.01 from ota
Never mind, found out my SD card was bad, seems like it going to start now.
Related
I just got a Nexus One. I have OEM unlocked, rooted and kinda put CWM recovery on it. I tried TWRP but it never went past the splash screen. CWM works sometimes and sometimes it goes back to stock recovery. Also, Every ROM I try to install, fails. Anyone have threads to point me too?
TigerDNA said:
I just got a Nexus One. I have OEM unlocked, rooted and kinda put CWM recovery on it. I tried TWRP but it never went past the splash screen. CWM works sometimes and sometimes it goes back to stock recovery. Also, Every ROM I try to install, fails. Anyone have threads to point me too?
Click to expand...
Click to collapse
kinda put CWM ?
Which ROMs are you trying to install? ICS , Sense and JB ROMs need updated HBOOTS.
For info/steps on repartitioning system, check here:
http://forum.xda-developers.com/showthread.php?t=1804571
I had a russian stock 4.1.3 firmware on my i9070 with standard samsung recovery and it was kinda buggy(Google Play wouldn't work) and I decided to flash TWRP (yes, I now realize it couldn't have worked since it is for gingerbread) and I got stuck in boot screen with no recovery. The only solution I could think of is to flash stock JB again, so I downloaded stock Romania(Cosmote) Firmware and tried to flash it with both Odin v1.87(with and without pit file) and v3.07 and Odin gave me a PASS each time, but I am still stuck in boot screen with no recovery.
Clearly I am doing something wrong, and it probably is something I should have read somewhere, but there are so many details that I don't know where to start looking...
Later Edit:
It finally booted! Sorry for the new thread.
I don't know why it wasn't working with the Romanian firmware but I used the Greece one and it works fine.
Hi, my friend is facing same problem. Its showing PASS always.
But, its not booting to custom recovery.
It goes to samsung recovey and says "Downloading"
How you got it cleared? Do u need to wait at that previous screen?
aby2aby said:
Hi, my friend is facing same problem. Its showing PASS always.
But, its not booting to custom recovery.
It goes to samsung recovey and says "Downloading"
How you got it cleared? Do u need to wait at that previous screen?
Click to expand...
Click to collapse
If you are flashing custom recovery, but you still have stock Samsung recovery, you are clearly doing something wrong.
When I flashed custom recovery, I had JellyBean Android installed and the recovery was made to work with Gingerbread, so it wouldn't boot recovery at all.
Since you are still getting the standard Samsung recovery, you haven't flashed the custom recovery correctly.
I suggest you retrace your steps and find some tutorial that could help you with your problem HERE.
When I couldn't access recovery, I just flashed stock JellyBean again with Odin.
So I flashed the Alliance Rom for my t-mo Note 4 and all I get is the boot logo.
I've gone through with Odin and the CF auto root junk, used TWRP to wipe and flash this rom.
I got TWRP on there, but I can't seem to put any files onto my phone. Like I select mount, and when I try to drag a file over, windows wont let me.
You see, I've got this error, and it says Kernel is Not SEandroid enforcing. I have looked for a fix, and people say that I need to flash a file called stocK_kernel, which I have.
I can't get this file onto the device it seems. Anyone have any ideas of what is going on?
EDIT: tried flashing another rom using odin and now all i get the t-mobile logo...
and I can't register for sammobile because I can't pass the captcha !! It's frustrating... I can't download what I think I need >_>
Any help would be awesome
I know this is a typical problem, I've been around XDA for a while, but never made an account until I decided to actually root and try to flash my device.
DaltonMplz said:
So I flashed the Alliance Rom for my t-mo Note 4 and all I get is the boot logo.
I've gone through with Odin and the CF auto root junk, used TWRP to wipe and flash this rom.
I got TWRP on there, but I can't seem to put any files onto my phone. Like I select mount, and when I try to drag a file over, windows wont let me.
You see, I've got this error, and it says Kernel is Not SEandroid enforcing. I have looked for a fix, and people say that I need to flash a file called stocK_kernel, which I have.
I can't get this file onto the device it seems. Anyone have any ideas of what is going on?
EDIT: tried flashing another rom using odin and now all i get the t-mobile logo...
and I can't register for sammobile because I can't pass the captcha !! It's frustrating... I can't download what I think I need >_>
Any help would be awesome
I know this is a typical problem, I've been around XDA for a while, but never made an account until I decided to actually root and try to flash my device.
Click to expand...
Click to collapse
A ROM using ODIN? Which one? If it's Lollipop...and you are on the T-Mobile logo screen, how long did you wait? It takes ~10 minutes to boot. But, if you are on the Samsung screen, there is a problem. So, I'm currently thinking you are not waiting long enough?
Try putting your rom in the extsd or internal and flash from there.
I would grab the stock firmware and flash that using Odin. Don't forget to factory reset using stock recovery after flashing stock firmware.
Just start over.
Then root and install twrp, once your back at square one, then put your rom of choice on either of the SD locations and flash using twrp.
A bootloop after flashing a rom is usually, in my experience, a kernel issue. So it couldn't hurt to have an alternate compatible kernel to flash if you need it.
If you have TWRP all is not lost. If you flashed the stock ROM then you probably don't have TWRP anymore. Its just about impossible to wreck this phone by flashing ROMs. I would ODIN to the stock COD6 build. I believe there is a thread with all the files you need in one zip. Follow those instructions and it should get you back to stock rooted and you can go from there with flashing ROMs again.
Sent from my SM-T900 using XDA Free mobile app
No the rom doesn't use Odin. But I imagine the person had to root and flash a custom recovery as well. The rom of course had to be flashed in recovery.
Trying to flash my Note 4 (Canadian version - N910W8) with either the AllianceROM 1.1 or TEKXodus 3.6 ROMs. Can't seem to get it done and I'm so incredibly frustrated.
Chronologically-speaking, here's what I did.
1. Rooted with appropriate Auto-Root file with Odin 3.09
2. Used Flashify to flash the latest TWRP files (2.8.7)
Most of the time, I just reboot onto "dm-verity verification failed." I've tried everything I can think of.
Sometimes, I get lucky and boot into TWRP. When I flash using TEKXodus 3.6 ROM, it proceeds to do everything but then, the screen goes black and I can never boot. I've read it can take 15 min for it to boot. I've waited 30 min with nothing. Only thing I could do is boot back into Download mode to reflash it with a stock ROM through Odin.
I don't understand why this doesn't work and I've flashed a bunch of phones before without any issue! Help? Anybody? UGH!
need help
Strat-Mangler said:
Trying to flash my Note 4 (Canadian version - N910W8) with either the AllianceROM 1.1 or TEKXodus 3.6 ROMs. Can't seem to get it done and I'm so incredibly frustrated.
Chronologically-speaking, here's what I did.
1. Rooted with appropriate Auto-Root file with Odin 3.09
2. Used Flashify to flash the latest TWRP files (2.8.7)
Most of the time, I just reboot onto "dm-verity verification failed." I've tried everything I can think of.
Sometimes, I get lucky and boot into TWRP. When I flash using TEKXodus 3.6 ROM, it proceeds to do everything but then, the screen goes black and I can never boot. I've read it can take 15 min for it to boot. I've waited 30 min with nothing. Only thing I could do is boot back into Download mode to reflash it with a stock ROM through Odin.
I don't understand why this doesn't work and I've flashed a bunch of phones before without any issue! Help? Anybody? UGH!
Click to expand...
Click to collapse
i m also having the same problem
did u find any solution
Strat-Mangler said:
Trying to flash my Note 4 (Canadian version - N910W8) with either the AllianceROM 1.1 or TEKXodus 3.6 ROMs. Can't seem to get it done and I'm so incredibly frustrated.
Chronologically-speaking, here's what I did.
1. Rooted with appropriate Auto-Root file with Odin 3.09
2. Used Flashify to flash the latest TWRP files (2.8.7)
Most of the time, I just reboot onto "dm-verity verification failed." I've tried everything I can think of.
Sometimes, I get lucky and boot into TWRP. When I flash using TEKXodus 3.6 ROM, it proceeds to do everything but then, the screen goes black and I can never boot. I've read it can take 15 min for it to boot. I've waited 30 min with nothing. Only thing I could do is boot back into Download mode to reflash it with a stock ROM through Odin.
I don't understand why this doesn't work and I've flashed a bunch of phones before without any issue! Help? Anybody? UGH!
Click to expand...
Click to collapse
So i see your posting about your flashing but what about your wipes..
Nandroid backup ext sd.
Then reboot twrp.
Wipe sys/dal/cache/data..
Include the internal if after what i posted above doesnt work.
Check the md5 sum of your downloaded rom..
Nav to your ext sd were you should have the rom stored..
And flash the rom..
Curious as to why you used flashify to get twrp.. it comes in a tar and flashes easy in odin..
You might wanna try that as well twrp may not be installed 100% corectlly.
Ok..[emoji41] [emoji106]
Last but not least you need to use bishock kern in your flash after the Rom flash, in the same session before reboot.
Or it will never work.
You booting problem more than likely kernel related..
Flashvetrin
So I flashed TWRP 3.0 on my SM-G920T and it didn't allow me to enter recovery but it was able to boot my phone.. but when I flashed TWRP 3.0.2.1 so i can install a custom rom it started doing a boot loop. I tried flashing 3.0 but now it just stays frozen on the screen.
UPDATE: I was able to use smart switch to restore my phone.
yeah i was gonna say just to use that program to go back to factory. Glad you did.
I used that to flash back to stock after a soft brick but my battery sucks now.