opening device: \\.\COM14
OKAY [ 0.016s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x6A19B4B
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.031s]
validating files
OKAY [ 0.016s]
switching to download mode
OKAY [ 0.000s]
greeting device for image downloading
OKAY [ 0.016s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
this is showing when i did blank flash ...
plz help!!!!!!!!!!!!
Welcome to the club.
zman01 said:
Welcome to the club.
Click to expand...
Click to collapse
plz suggest solution as soon as possible.............
For this i m very greatful to you
http://www.mobileunbrick.com/ contact them!, they can fix your Moto G2. Send them your model name(XT1068..) and send him your phone. Its located in India and costs ca. 10 Dollars for everything.
I bought a new Mainboard instead of this, because I didn't know from mobileunbrick.com.
Good Luck
EDIT: https://www.youtube.com/watch?v=WynBaVyW0oU
Related
i tried MBM-CI_4.3 and flackflash
that i can not unbrick this phone
how i can do it please
E:\moto\MBM-CI_4.3>.\qboot.exe blank-flash
< waiting for device >
opening device: \\.\COM44
OKAY [ 0.003s]
greeting device for command mode
OKAY [ 0.001s]
identifying device
...serial = 0x67809E4
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.006s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.004s]
validating files
OKAY [ 0.482s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.002s]
sending programmer
OKAY [ 0.012s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
my original firmware is 4.4.4
after my phone is bricked i cannot us method for unbrick with use MBM-CI_4.3 or flackflash
i tried 4.4.2 , 4.3 4.4.4 not unbrick
allwayse message FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet) and exit program
allwayse black screen driver Qualcomm HS-USB QDLoader 9008
not enter in recover
help me please
tks
yours post is a little confuse.
try to flash a xml ROM the one for yours device via command line.
do what is described in here in the 4° post.
i cannot access in fastboot mode
E:\moto\AMXPR_XT1063_4.4.4_KXB21.85-14_cid12_CFC_SVC.xml>mfastboot.exe flash partition gpt.bin
< waiting for device >
my phone in QDLoader mode
my computer found phone with driver Qualcomm HS-USB QDLoader 9008
its bricked
i tried unbrick with blank-flash and some problem
i hardbricked my moto x 2014. And i found a way to fix it, or that should have fixed it.
http://www.usoftsmartphone.com/t300062.html
But When i do everything and i open the .bat file i get an error message at the end.
C:\Users\USERNAME\Desktop\Blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ 0.016s]
greeting device for command mode
OKAY [ 0.000s]
identifying device
...serial = 0xSOMETHINGIHAVECENSORED
...chip-id = 0x7B4 (MSM8974_PRO)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.010s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.006s]
validating files
OKAY [ 0.001s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.003s]
sending programmer
OKAY [ 0.008s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\USERNAME\Desktop\Blankflash\blankflash>pause
Press any key to continue . . .
Is there anything i can do about that?
ulriks9 said:
i hardbricked my moto x 2014. And i found a way to fix it, or that should have fixed it.
http://www.usoftsmartphone.com/t300062.html
But When i do everything and i open the .bat file i get an error message at the end.
C:\Users\USERNAME\Desktop\Blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ 0.016s]
greeting device for command mode
OKAY [ 0.000s]
identifying device
...serial = 0xSOMETHINGIHAVECENSORED
...chip-id = 0x7B4 (MSM8974_PRO)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.010s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.006s]
validating files
OKAY [ 0.001s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.003s]
sending programmer
OKAY [ 0.008s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\USERNAME\Desktop\Blankflash\blankflash>pause
Press any key to continue . . .
Is there anything i can do about that?
Click to expand...
Click to collapse
No because that is not for this device. It won't work. And was it really necessary to start another thread about the same problem?
Sent from my XT1095 using Tapatalk
It says that it's for moto x 2014 (2nd gen) or is it for Verizon maybe?
Sent from my GT-N5110 using XDA Free mobile app
ulriks9 said:
It says that it's for moto x 2014 (2nd gen) or is it for Verizon maybe?
Sent from my GT-N5110 using XDA Free mobile app
Click to expand...
Click to collapse
It says it is but there are no blankflash files for the 2014 Moto X. More than likely it is the first gen Moto X files.
Sent from my XT1095 using Tapatalk
Those files are for the first gen moto x which is why it does not work. We need the second gen files which we do not have.
Sent from my XT1095 using Tapatalk
AGISCI said:
Those files are for the first gen moto x which is why it does not work. We need the second gen files which we do not have.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Is not look to moto x1 blankflash.
Msm8974 is moto x2 but i dont know why say pro becide msm8974.
Can you send again the link to test it?
Good night ... I have a Moto g2 lte xt1078. it does not start, no fastboot, no booting... they tried to install lolipop and did root procedure. already tried several tutorials, as the blankflash, but without results. I removed the battery several times; Full battery; when connected to PC without battery the LED flashes once; all drivers installed. current driver Qualcomm HS-USB QDloader 9008. The result of the blankflash this in content below.
help please.
sorry bad english.
C:\Users\Claus\Desktop\blankflash_lollipop>.\qboot.exe blank-flash
opening device: \\.\COM9
OKAY [ 0.002s]
greeting device for command mode
OKAY [ 0.002s]
identifying device
...serial = 0x7B72F04
...chip-id = 0x805 (MSM8926)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.008s]
finding files
...programmer = programmer_8926.mbn
...singleimage = singleimage_8926.bin
OKAY [ 0.005s]
validating files
OKAY [ 0.001s]
switching to download mode
OKAY [ 0.002s]
greeting device for image downloading
OKAY [ 0.002s]
sending programmer
OKAY [ 0.012s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\Claus\Desktop\blankflash_lollipop>pause
Pressione qualquer tecla para continuar. . .
tested: MBM-CI 4.3; 4.4.2; 4.4.4; 5.0.
It's the same error:
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
motherboard is dead.
Moto G 2014 xt1068/xt1069/xt1078
Is there any tool that can get the Moto G 2014 xt1068 / xt1069
/ Xt1078 hardblick in the development? if not I humbly ask that the group managed to get the g1 moto hardblick can also take other cell line motorola umm thanks to @ilikered for its beautiful job with the bike g1 parabens it stays that way and that can help us not only to me but to several people who are in the same situation , thanks
Hey, I've been trying to follow a guide on how to unbrick my Moto G but I keep getting the same error:
C:\Users\perdi\Desktop\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
OKAY [ 0.003s]
identifying device
...serial = 0x66CB552
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.009s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.006s]
validating files
OKAY [ 0.010s]
switching to download mode
OKAY [ 0.002s]
greeting device for image downloading
OKAY [ 0.002s]
sending programmer
OKAY [ 0.013s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\perdi\Desktop\blankflash>pause
Press any key to continue . . .
Everything goes well until I have to do that, and I would like some help.
(The guide: http://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788)
Thanks in advance.
Hi guys whats up? So anyone can make the dump ROM of Moto X4 (Android 8.0 or above) for me? My device was hard brick and i can save it, only with a DUMP ROM or a blank flash files that don't exist yet!! Thank You for attention...
LucasHanchop said:
Hi guys whats up? So anyone can make the dump ROM of Moto X4 (Android 8.0 or above) for me? My device was hard brick and i can save it, only with a DUMP ROM or a blank flash files that don't exist yet!! Thank You for attention...
Click to expand...
Click to collapse
The following apparently worked for someone:
https://forum.xda-developers.com/showpost.php?p=76918099&postcount=7
edufur said:
The following apparently worked for someone:
https://forum.xda-developers.com/showpost.php?p=76918099&postcount=7
Click to expand...
Click to collapse
I'll try bro! If works I will tell you soon! But if don't can you help me?
edufur said:
The following apparently worked for someone:
https://forum.xda-developers.com/showpost.php?p=76918099&postcount=7
Click to expand...
Click to collapse
[ -0.000] Opening device: \\.\COM4
[ 0.010] Detecting device
[ 34.031] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.031] Check qboot_log.txt for more details
[ 34.032] Total time: 34.032s
[ 34.032]
[ 34.032] qboot version 3.86
[ 34.032]
[ 34.032] DEVICE {
[ 34.032] name = "\\.\COM4",
[ 34.032] flags = "0x64",
[ 34.032] addr = "0x62FD64",
[ 34.032] api.bnr = "0xD82C88",
[ 34.032] }
[ 34.032]
[ 34.032]
[ 34.032] Backup & Restore {
[ 34.032] num_entries = 0,
[ 34.032] restoring = "false",
[ 34.032] backup_error = "not started",
[ 34.032] restore_error = "not started",
[ 34.032] }
[ 34.032]
Any Solution?
edufur said:
the following apparently worked for someone:
https://forum.xda-developers.com/showpost.php?p=76918099&postcount=7
Click to expand...
Click to collapse
man i did it thank you very muchhhh!!
edufur said:
The following apparently worked for someone:
https://forum.xda-developers.com/showpost.php?p=76918099&postcount=7
Click to expand...
Click to collapse
Mark this quote with solved! Please
LucasHanchop said:
[ -0.000] Opening device: \\.\COM4
[ 0.010] Detecting device
[ 34.031] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.031] Check qboot_log.txt for more details
[ 34.032] Total time: 34.032s
[ 34.032]
[ 34.032] qboot version 3.86
[ 34.032]
[ 34.032] DEVICE {
[ 34.032] name = "\\.\COM4",
[ 34.032] flags = "0x64",
[ 34.032] addr = "0x62FD64",
[ 34.032] api.bnr = "0xD82C88",
[ 34.032] }
[ 34.032]
[ 34.032]
[ 34.032] Backup & Restore {
[ 34.032] num_entries = 0,
[ 34.032] restoring = "false",
[ 34.032] backup_error = "not started",
[ 34.032] restore_error = "not started",
[ 34.032] }
[ 34.032]
Any Solution?
Click to expand...
Click to collapse
About this If dont work press the Power Button with the vol- Button and click in the blank-flash.bat on same time and wait the program recognize your board,storage,processor!
You can change the title and make it SOLVED I think!
abhi212b said:
You can change the title and make it SOLVED I think!
Click to expand...
Click to collapse
I've already did it! Thank you