Related
Hello,
I tried to install MIUI10 so I followed the tutorial. When I flashed I realized that I had checked the wrong case (clean all and lock instead of clean all) I panicked and unplugged my phone.
I only have access to the fastboot but pc no longer detects the phone I have a waiting device error
Your help will be appreciated.
Enter edl mode and try to flash stock rom with miflash.
Do not lock bootloader on custom rom, ever.
Sent from my Mi A2 using Tapatalk
I can't enter in edl mod because my device isn't longer detected by my pc
Since thé flash fastboot say WAITING DEVICE
FieryAura said:
I can't enter in edl mod because my device isn't longer detected by my pc
Since thé flash fastboot say WAITING DEVICE
Click to expand...
Click to collapse
Restart device and fastboot mode and only then connect it to the pc
Okay I've turn my phone on fastboot mode
I try fastboot.exe oem edl
But error waiting device
And mi flash doesn't detect device.
I can't see my device ony device manager..
FieryAura said:
Okay I've turn my phone on fastboot mode
I try fastboot.exe oem edl
But error waiting device
And mi flash doesn't detect device.
I can't see my device ony device manager..
Click to expand...
Click to collapse
Did you try connecting it after you restarted to fastboot mode? This helped me some time.
Already try...
FieryAura said:
Already try...
Click to expand...
Click to collapse
It's bricked. Try forcing edl mode by shorting pins. Method given here in the thread.
Sent from my Mi A2 using Tapatalk
I see it but I search à software method :/
Thanks
Downloadhttp://xiaomi-miui-ota-3rdrom.ks3-cn-beijing.ksyun.com/rom/u265827351/3.3.525.23/miflash_unlock-en-3.3.525.23.zip this and after extracting open drivers application . boot to fastboot and then connect device .
Already try my device still no detected
There's no other way. I have the same issue (panicked and unplugged my phone) and successfully revived it by shorting the pins. Should try that method, it works!
Thanks you for all your reply. I will try shorting pins
even i tried eld by shorting two pins its not working for me
:crying: bro even i am in same condition bro please do help me if it works for you
hii ,
my screen is stuck on fastboot screen, it asks me to try again or power off . if i try again it asks me to try again or factory reset. dont want to do factory reset as i have too much data on phone. please help me regarding this.
Thanks
Nishi
Hello guys. I accidentally wiped out my xiaomi mi 5 including the internal storage from TWRP . Whenever I try to connect phone to PC through fast boot mode , device redirects to TWRP .
Also , another issue I'm encountering is that my device, despite using numerous USB c cables , doesn't get recognized by my PC, I've even tried a different system still the same issue .
Therefore , with the PC not detecting my phone , and no USB otg being detected by TWRP ,I'm not able to copy rom into internal storage and hence I'm doomed and helpless . I've tried everything I could , adb fastboot miflash , but no solution for me.
It will be so nice of any of you to guide me and help me with this situation . Thank you
Try to connect it on different PC ? Unistall all drivers and see if PC detects it in fastboot mode ? Maybe see if charging port is damaged ? Sometimes data pins has some issues.
If nothing works, you need to open up your phone and short boot point, which will make it go in Qualcomm 9001 mode, I am not sure which mode is in mi5, could be edl. You can find videos on YouTube, and 4pda mi5 forum has details guide, but it's Russian you need to use Google translate.
https://in.c.mi.com/thread-387857-1-0.html
I found this link , please check it and let me know that is this how I should do it ?
About that you mentioned before , I have tried 3 different devices for this phone and none of them detects the device , although I have windows running in macbook I havent tried on that. Thank you
mi tool v2
Xiaomi mi tool v2
xiaomitool com V2
try the tool worked for me.
last solution would be adb.i hope you have a good cable
-fastboot flash boot boot.img
-fastboot flash system system.img
-fastboot flash recovery recovery.img
-fastboot flash cache cache.img
-fastboot flash modem NON-HLOS.bin
-fastboot flash sbl1 sbl1.mbn
-fastboot flash dbi sdi.mbn
-fastboot flash aboot emmc_appsboot.mbn
-fastboot flash rpm rpm.mbn
-fastboot flash tz tz.mbn
-fastboot flash LOGO logo.bin
-fastboot reboot
something like that ^
eddieim3000 said:
Xiaomi mi tool v2
xiaomitool com V2
try the tool worked for me.
last solution would be adb.i hope you have a good cable
-fastboot flash boot boot.img
-fastboot flash system system.img
-fastboot flash recovery recovery.img
-fastboot flash cache cache.img
-fastboot flash modem NON-HLOS.bin
-fastboot flash sbl1 sbl1.mbn
-fastboot flash dbi sdi.mbn
-fastboot flash aboot emmc_appsboot.mbn
-fastboot flash rpm rpm.mbn
-fastboot flash tz tz.mbn
-fastboot flash LOGO logo.bin
-fastboot reboot
something like that ^
Click to expand...
Click to collapse
The thing is whenever I connect the phone to my computer , it isn't recognized. It doesn't show up on device manager and first and foremost, it doesn't make the *ping* sound whenever a new device is connected.
So I'm not sure whether mitool will work although I'll give it a try .
I've already tried adb with nice cables (samsung). Since my problem is that it doesn't get detected , so adb is already no use
Flash rom via otg. Thats all
ali.f said:
Flash rom via otg. Thats all
Click to expand...
Click to collapse
Otg not detecting on twrp. From the instructions I was supposed to go to mount > select USB otg but it doesn't get selected and even after connecting the otg , it shows 0MB .
I even bought another otg just to make sure
try to flash zip with adb sideload method ? i dont know in your sitution but i use this method often when i wanna clean flash in my device. sorry maybe it cant help you but i just want to help you.
burakmi5 said:
try to flash zip with adb sideload method ? i dont know in your sitution but i use this method often when i wanna clean flash in my device. sorry maybe it cant help you but i just want to help you.
Click to expand...
Click to collapse
Thanks , but since I cant get to see my device on PC, so doing it through adb sideload doesn't even come near
What did yo do with your phone? I had same problem before. I try to switch to f2fs, cache and data only. I lost verything. And i revert back to ext4. Lucky me i still can flash rom using otg.
ali.f said:
What did yo do with your phone? I had same problem before. I try to switch to f2fs, cache and data only. I lost verything. And i revert back to ext4. Lucky me i still can flash rom using otg.
Click to expand...
Click to collapse
I wanted to install a new rom , and without taking a backup I wiped out everything before even copying the rom . Honestly I dont know what's causing this , before the wipe my otg was always working in twrp. Is it because of the twrp ; I use zcx twrp 3.0.2 by XM (while booting to twrp it shows an alien logo)
Thats the problem. Any chance you replace your twrp to official twrp?
ali.f said:
Thats the problem. Any chance you replace your twrp to official twrp?
Click to expand...
Click to collapse
Can you guide me ? I'm not able to copy anything into the mobile.
mirzaarslaan said:
The thing is whenever I connect the phone to my computer , it isn't recognized. It doesn't show up on device manager and first and foremost, it doesn't make the *ping* sound whenever a new device is connected.
So I'm not sure whether mitool will work although I'll give it a try .
I've already tried adb with nice cables (samsung). Since my problem is that it doesn't get detected , so adb is already no use
Click to expand...
Click to collapse
Firstly samsung most likely wont give you a good data cable.i meant a edl cable .i should have said so .doesnt matter if windows shows it or not.launch cmd as admin and try to flash something... fastboot flash recovery recovery.img .does it take any time at all or doesnt do anything?try an other cable if nothing s happening
eddieim3000 said:
Firstly samsung most likely wont give you a good data cable.i meant a edl cable .i should have said so .doesnt matter if windows shows it or not.launch cmd as admin and try to flash something... fastboot flash recovery recovery.img .does it take any time at all or doesnt do anything?try an other cable if nothing s happening
Click to expand...
Click to collapse
I never got the idea of using edl cable. I'm probably gonna make my own edl cable by following online and then let's see. I really hope this does the trick
eddieim3000 said:
Firstly samsung most likely wont give you a good data cable.i meant a edl cable .i should have said so .doesnt matter if windows shows it or not.launch cmd as admin and try to flash something... fastboot flash recovery recovery.img .does it take any time at all or doesnt do anything?try an other cable if nothing s happening
Click to expand...
Click to collapse
I wanted to give an update. I tried the test point method and it didn't work . The device isn't detecting on my PC
sunilromy said:
Try to connect it on different PC ? Unistall all drivers and see if PC detects it in fastboot mode ? Maybe see if charging port is damaged ? Sometimes data pins has some issues.
If nothing works, you need to open up your phone and short boot point, which will make it go in Qualcomm 9001 mode, I am not sure which mode is in mi5, could be edl. You can find videos on YouTube, and 4pda mi5 forum has details guide, but it's Russian you need to use Google translate.
Click to expand...
Click to collapse
Nothing worked for me . I even opened up my phone and did the short boot point , after 5 seconds or so , it goes to charging. Can it be that i should get a new usb c port or is it time to put an end to this dead phone :/
mirzaarslaan said:
I wanted to give an update. I tried the test point method and it didn't work . The device isn't detecting on my PC
Click to expand...
Click to collapse
1 windows 10 are in test mode
2 xiaomi tool is installed
3 exit aps like bluestacks
4 you have a good data cable
5 you have adb and in the same folder unpacked the recovery.
6 power and volume - to enter fastboot mode
fastboot flash recovery recovery.img
try to flash the recovery even its not recognized at the time.does it take any time at all ?or does it just waits ?
eddieim3000 said:
1 windows 10 are in test mode
2 xiaomi tool is installed
3 exit aps like bluestacks
4 you have a good data cable
5 you have adb and in the same folder unpacked the recovery.
6 power and volume - to enter fastboot mode
fastboot flash recovery recovery.img
try to flash the recovery even its not recognized at the time.does it take any time at all ?or does it just waits ?
Click to expand...
Click to collapse
Is it necessary to enable test mode , my PC is not allowing test mode to be enabled.
Although what you've mentioned , I have already tried , when I run the command flash recovery.img it says 'waiting for any device' and within 15 seconds , phone reboots to charging mode with a battery logo
mirzaarslaan said:
Is it necessary to enable test mode , my PC is not allowing test mode to be enabled.
Although what you've mentioned , I have already tried , when I run the command flash recovery.img it says 'waiting for any device' and within 15 seconds , phone reboots to charging mode with a battery logo
Click to expand...
Click to collapse
without test mode you can not install xiaomi tools2 therefore no correct drivers
cmd run as admin
bcdedit -set TESTSIGNING on
restart
hello guys..
iam getting Black screen instead of fastboot mode !!!!
after rolling back from Wayne to jasmine (mi 6x to mi A2)
if i try to get into fastboot mode (vol down + power btn).. its not even working..
please help... Bootloader is already unlocked. and currently iam using android one. (rolled back from mi 6x)
current Rom is working fine but i want to install miui 10 pie..
plss tell me how to fix fastboot mode...
Reflash stock splash.img
Aerobatic said:
Reflash stock splash.img
Click to expand...
Click to collapse
How to reflash bro... fastboot mode is not working. Is there any other way to install rom without fastboot
hackerh2 said:
How to reflash bro... fastboot mode is not working. Is there any other way to install rom without fastboot
Click to expand...
Click to collapse
You'r fastboot is working, you just lost the image for bunny in proces of reverting
mariosenta said:
You'r fastboot is working, you just lost the image for bunny in proces of reverting
Click to expand...
Click to collapse
i am facing the same problem. pls help... how to recover lost image
Open your phone, flash in EDL mode... it is simple... Find in youtube edl guide for mi a2
Sorry my bad english
I had this problem too. I was trying to flash stock jasmine rom from my amd ryzen pc and this happened. It was the first time I was using ryzen pc for flashing. In a reddit post, I saw this: "fastboot is broken on ryzen pcs". Then I tried to flash from my intel laptop and problem solved.
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
can you access the twrp?
foneiamone said:
can you access the twrp?
Click to expand...
Click to collapse
No. I can only access fastboot.
Somebody please help...
unbrick
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
PierceB said:
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
Click to expand...
Click to collapse
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
jaseemharry said:
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
Click to expand...
Click to collapse
Did already share a description! https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3 Or U can buy a deepflash cable this should also work.
jaseemharry said:
No. I can only access fastboot.
Click to expand...
Click to collapse
Have you tried installing TWRP via fastboot?
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
obstinate_penguin said:
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
Click to expand...
Click to collapse
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
jaseemharry said:
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
Click to expand...
Click to collapse
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Harshad patel R said:
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Click to expand...
Click to collapse
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
PierceB said:
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
Click to expand...
Click to collapse
One time fail in flashing = locked boot loader
Or for unlocking bootloader from official (easy) need live mobile not dead
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
Tried but failed. Boot loader was locked again somehow.
PierceB said:
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
Click to expand...
Click to collapse
Tried unlocking boot loader and was not successful because the phone was bricked. My only option was to use edl test point. Now i installed miui 11. (Aprart from some minor bugs which can be eliminated by reflashing some other roms) Thank you guys. Now my phone is successfully unbricked.
For somebody who is having the same issues,
My phone (Redmi 4_Santoni) was completely bricked. The only thing i can access was fastboot by pressing the volume down + Power button combination. But i could not install twrp or any other recovery because my boot loader was locked. I got it fixed completely with the help of you guys (Thanks again) and i want to share the procedure i went through.
Condition: Completely bricked with only fastboot access, Locked bootloader.
I tried this video (https://www.youtube.com/watch?v=j27x5iJSS40) but failed because i could not access recovery. So my only solution was to use edl test point flashing. I followed this guide https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3. It was very easy to do. But in the device manager (Press Windows key + R and then type devmgmt.msc and press enter) instead of showing "Qualcomm HS-USB QDloader 9008", the device is shown as "Qualcomm HS-USB Diagnostics 900E". The problem was you have to plug in in USB cable while the test points is being connected with a pair of tweezers or a paperclip as shown in the link above.
Make sure you already downloaded the latest mi flash tool from here https://xiaomiflashtool.com/ and download fast boot rom from the official website. (Go to https://en.miui.com/ Click rom downloads. Click flashing guide. Download the fastboot rom from there for your device.) Now flash your device using mi flash tool and voila. your phone is unbricked.
Thank you guys..
Hello,
could someone help me? I got this phone. where only the REDMI logo is displayed and restarted.
First time when I connected the phone and pressed vol.down and pwr btn. fastboot mode loaded. Tried loaded recovery but pwr up didnt work.
I downloaded stock rom and I wanted to flash. But phone turnned off and did not load again to fastboot. (I did nothing, I had only connected phone via usb and watching fotbal)
When I connect without battery and holding down and up shows mediatek com 3 but it will disappear after a while.
Canot load to fastboot and canot load to recovery. Tried miflash but device doesnt show.
Do you have any seizures? solution ?
thank you. I am ready to donate for good tips
willda2122 said:
Hello,
could someone help me? I got this phone. where only the REDMI logo is displayed and restarted.
First time when I connected the phone and pressed vol.down and pwr btn. fastboot mode loaded. Tried loaded recovery but pwr up didnt work.
I downloaded stock rom and I wanted to flash. But phone turnned off and did not load again to fastboot. (I did nothing, I had only connected phone via usb and watching fotbal)
When I connect without battery and holding down and up shows mediatek com 3 but it will disappear after a while.
Canot load to fastboot and canot load to recovery. Tried miflash but device doesnt show.
Do you have any seizures? solution ?
thank you. I am ready to donate for good tips
Click to expand...
Click to collapse
Try this:
Thread '[GUIDE] UNBRICK YOUR HARD-BRICKED MTK' https://forum.xda-developers.com/t/guide-unbrick-your-hard-bricked-mtk.4564029/
1lopes said:
Try this:
Thread '[GUIDE] UNBRICK YOUR HARD-BRICKED MTK' https://forum.xda-developers.com/t/guide-unbrick-your-hard-bricked-mtk.4564029/
Click to expand...
Click to collapse
Thank you for reply. I will try
Were you able to solve it? I am in the same situation and I don't know what to do, the only difference is that my PC detects it
TheZian said:
Were you able to solve it? I am in the same situation and I don't know what to do, the only difference is that my PC detects it
Click to expand...
Click to collapse
1lopes said:
Try this:
Thread '[GUIDE] UNBRICK YOUR HARD-BRICKED MTK' https://forum.xda-developers.com/t/guide-unbrick-your-hard-bricked-mtk.4564029/
Click to expand...
Click to collapse