Hi. I am supporting my friend. Who has the i9305, via teamviewer so i am using the Universal android toolkit, and it worked ok.
I rooted it, and installed twrp 2.6.3.0 but here i failed. I could not install kitkat or anything else. So i had to revert to cm 10.1.3 and the camera does not work also the android keyboard from gapps 20130812 did fail to work. I had to push him a swiftkey apk, to work.
Now is my question what do i have to do to install cm 11 for i9305 ???
Just a new recovery?
Because every newer file just gets aborted and doesnt install, no liquid smooth or cm11.
Thanks.
My device was on 4.3 and I flashed Philz touch recovery and did a backup and restore. Then it stuck at Samsung logo when booting.
Wiping caches, resettings, fixing permissions, ...... non of them worked.
Finally I could get it booting by flashing 4.4.4 Stock Rom using Odin 3.07
http://forum.xda-developers.com/gal...ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807
Its working PERFECT now
also rooted using this guide
http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
(In this time I did not used any recovery mentioned in the post. I just rooted it)
:good:
Hi
I`m helping a friend rooting and flashing a custom os to his S4 active I9295
I have previous rooting experience with htc legend/desire, nexus 5 and galaxy tab.
I have done the following:
Method 1:
Flashed CWM with odin
Entered CWM trying to flash SuperSU, but here I failed.
Error message, and no supersu installed.
method 2:
Flashed CF auto root through ODIN
SuperSU installed and root access OK
Entered CWM
Full wipe
Trying to flash CM12 nightly latest build, but here I fail.
Error message and no Cyanogenmod installed.
Phone reboots with stock samsung OS automatically
can anyone point me in the right direction here?
Hello!
I made some ports of custom recoveries for Samsung Galaxy S4 Mini Plus both I9192I (serranove3gxx) and I9195I (serranoveltexx) variants:
CWM 6.0.5.1
[*]Philz Touch 6.59.0 (based on KK)
[*]TWRP 2.8.4.0 (based on KK)
[*]TWRP 2.8.7.1 (based on LP + new UI)
WARNING! Flashing custom recovery will trip your knox!
Installation instructions:
for ODIN:
1. Extract x.x.x.md5 from x.x.x.tar.zip
2. Flash with ODIN x.x.x.md5 file
for CWM:
1. Copy x.x.x.zip (without tar) to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select x.x.x.zip recovery and confirm installation.
NOTE: If used TWRP-2.8.4.0 wipe cache before do installing TWRP-2.8.7.1 and do the same if backwards.
Attention!
I9192I (serranove3gxx) /I9195I (serranoveltexx) are not the same as that I9192 (serrannodsxx) / I9195 (serranoltexx), and these recoveries are unsuitable for I9192/I9195
Download:
I9192I
I9195I
Hi,
A big thank for your recovery, even if I don't own an i9192i but an i9195i. It's a good start for a new ROM.
I think both are the same except than the i9192i have 2x3G and i9195i have only one 4G(lte).
zeLogik said:
Hi,
A big thank for your recovery, even if I don't own an i9192i but an i9195i. It's a good start for a new ROM.
I think both are the same except than the i9192i have 2x3G and i9195i have only one 4G(lte).
Click to expand...
Click to collapse
I released custom kernels for I9192I and I9195I:
http://forum.xda-developers.com/gal...-mini-plus-t3184231/post62450499#post62450499
Hi alexax66
Thank you to work with this new model but when i flash cwm recovery it say "signature verification failed" and it reboot my device. Any idea for the problem ?
Thanks
Envoyé de mon GT-I9195I en utilisant Tapatalk
@Math996: I don't have any error with TWRP, and a clean message that said that kernel was flashed, but when I boot, no new kernel...
alexax66 is on the way This could be the same problem, but TWRP is less verbose...
Math996 said:
Hi alexax66
Thank you to work with this new model but when i flash cwm recovery it say "signature verification failed" and it reboot my device. Any idea for the problem ?
Click to expand...
Click to collapse
You must flash cwm through Odin
Update:
added ported recoveries for I9195I (serranoveltexx) variant
Good job, you helped me a lot. I was searching for this about 5 month. And cant you make unnoficial roms like cyannogenmod lollipop or smth like this?ty anyway
Hey, I flashed CWM, and it worked great (on the I9195I), and then wanted to try out Philz and TWRP, which both work great, but 1 issue: with those recoveries, my phone only can boot to recoveries. Anyone else seeing this?
Hello,
Thanks for your effort.
I have i9195i.
I'm new here and my question is if I installed TWRP 2.8.7.1 using Odin.
My phone will be rooted?
Sorry for stupid question and thank you very much in advance.
Hello,
Do I have to root my i9195i using "Kingroot/SuperSU Me" before installing CWM or TWRP or can I install directly TWRP/CWM and then install SuperSu trough recovery to have a rooted phone?
Regards
the phone itself is turned off! rekaveri tried to flash. Odin says that rekaveri firmware was successful, but does not change rekaveri. worth it nevhodit on the splash screen reboot (openrecovery-twrp-3.0.0-0-serrano3gxx-STABLE). sewed 4 file from the pit file tube sews one Gowar perezagruzhaetsya all good phone himself and tries to log in rekaveri then reboot again forever! I hope the situation described is available! pomagite pliz Innet searched all about a certain sales deaf S4 mini Google translate Sorry for not knowing English
Kasimodo said:
Hello,
Do I have to root my i9195i using "Kingroot/SuperSU Me" before installing CWM or TWRP or can I install directly TWRP/CWM and then install SuperSu trough recovery to have a rooted phone?
Regards
Click to expand...
Click to collapse
I just installed TWRP and Supersu, my phone rooted now.
You don't need root before install TWRP/CWM .
lolipop or marsmallow custom rom for i9195i ? please
HI alexax66,
thansk for your CWM - it works fine with my GT-I9192I.
Unfortunately there is still no cyanogenmod 13
Best regards
HI alexax66,
now i tried TWRP - flashing worked perfekt but after installing superuser I got the same as with CWM.
Boot loop with: Recovery is not seandroid enforcing
Set warranty Bit: Recovery
How can I fix this?
Best regards
Dog
ok I fixed It myself- just use odin an reflash it and the problem is gone - AND u got root access
I was happy about found custom recovery for I9195I, but i cannot install. Neither by flashing with Odin, neither i can root with anything. Build is KTU84P.I9195IXXS1AQA1 . For these recoveries the Odin says Secure error, for all.
Can someone please point out what i'm doing wrong?
Solved! One must disable all security features (new reset lock, remote control, everything), before flashing.
Hello guys, im sorry for my broken english but i will try my best.
To my device, ive got an Samsung Galaxy S7 (SM-930F)
- Custom Rom HydraRom V1.2
- TWRP Herolte is installed and CP + BP was flashed with Odin (latest versions)
Now my question for you guys is, how am i able to root that phone/ cfw right ?
i was rooting it with the instructions of the XDA sites & youtube videos.
also the Rom itself comes with
- rooted with latest supersu 2.77 beta (aroma choice)
- xposed add (aroma choice)
- magisk added (aroma choice)
i selected everything of it in the aroma installer but it wont install afterwards.
i dont know what i can do now, i tryed to flash xposed with BL seperately but after that i got stuck in Bootloop.
it would be awesome if you could help me.
thanks, erik.
Hi dear developers,
I just got my new Galaxy Tab S2, T813. Updated it to Nougat, firmware T813XXU2BQD1_T813OXA2BQD1_DBT. I rooted it via Chainfire's autoroot and worked perfectly fine. I installed the latest TWRP (twrp-3.1.1-1-gts210vewifi), advance wiped in twrp (like tens of times before with Galaxy S5, Galaxy S7, Redmi 4, ZUK Z2, Xiaomi Mi 5s, LG G2 etc.). I flashed Lineage 14.1 (Lineage-14.1-20170516-nightly-gts210vewifi) but when I rebooted the phone Lineage setup would not start. I went back and advance wiped again and installed an older Lineage version but again the same. I advance wiped again and installed Omni (Omni-7.1.2-20170521-gts210vewifi-weekly), but here again setup would not start. I reformatted the data in twrp and reinstalled Lineage 14.1 but again the same. So I went back and flashed via Odin3_v3.12.3 the stock firmware (for Germany) T813XXU2BQD1_T813OXA2BQD1_DBT. Odin command was pass and i though everything was fine. When the original firmware rebooted i have the same problem, the setup would not start and starting apps would crash. I entered recovery (of course stock recovery because twrp has been wiped by odin), but it says "no command".
Smart Switch would not support my device although it actually should.
I tried to flash via odin also on my second PC but again the same problem. Both PCs are running Windows 10.
I never faced something like this before. And after hours of search I found nothing. Please help me solve my problem so that i can install at least one firmware (no matter which one: Stock, Lineage, Omni etc.).
When you flashed lineageOS or omni rom, did you also flash gapps?
musashiken said:
When you flashed lineageOS or omni rom, did you also flash gapps?
Click to expand...
Click to collapse
First time flash:
+ clean advanced wipe
+ lineage
+ gapps (ARM64, Android 7.1, Pico)
+ addonSU
other times flash:
+ clean advanced wipe
+ lineage
or
+ clean advanced wipe
+ omni
I believe either flashing Chainfire Autoroot file or flashing TWRP might have caused the problem and might have deleted something or maybe i deleted something during first time wipe via twrp.
Is there a patch or aboot or something to flash via Odin prior to flashing the stock firmware to correct the problem with stock rom setup blockade?
Ok, I'm not sure what went wrong with how you did stuff but let's not use Chainfire's autoroot again. The best way to root is to do it manually.
Anyway, firstly you should be able to go back to stock samsung firmware by using Odin and flashing the full tar file. I'm not sure why that is not working for you as that's the only way to reset and fix your tablet.
Please check how to flash the full firmware via Odin again.
- ensure you downloaded the correct nougat firmware file. Latest LineageOS should require the EU version of the nougat firmware. I think it is T813XXU2BQD3. Not the firmware you used.
Once you are able to load a fresh samsung firmware, then come back again. I'll see if I can guide you through the TWRP and rooting process again.
musashiken said:
ensure you downloaded the correct nougat firmware file. Latest LineageOS should require the EU version of the nougat firmware. I think it is T813XXU2BQD3. Not the firmware you used.
Click to expand...
Click to collapse
Thanks fo the tip with the new version of firmware. I installed the firmware ...QD3 via Odin...
Closed per OP request