hello folks
i have an xt1093 perfectly running on 5.1 with unlocked bootloader and twrp recovery and backup done, using it as gsm
i was just wondering if i can flash the xt1095 5.1 on it and go to 6.0 from there
any help guys?
http://forum.xda-developers.com/moto-x-2014/general/guide-xt1097-to-xt1095-nextel-t2972693/page58
thanks
successfully converted my 1093 to 1095 and upgraded to 6.0
happy
Related
Hello All.
I recently picked up a Comsumer Cellular Moto G 2014 Model XT1064. I am currently trying to allow it to receive OTA updates or at the very least upgrade it to lollipop. I've followed this guide [here] and I have unlocked the bootloader, however I am having trouble getting my hands on proper links. I managed to 'downgrade' to 21.11.13.titan_retuaws.retuaws.en.US cc however I cannot flash any other roms. I tried flashing an XT1068 5.2 rom using fastboot however with the dual sim ROM, I got no service from my sim card.
Information and links seem to be scarce for this model so any finger in the right direction would be appreciated.
Thanks!
You can forget OTA since Consumer Cellular will not push out OTA's. I personally am going to hold at 5.01 since Motorola is close to pushing out 5.1 which is supposed to fix a few things. I flashed my CC Moto with TWRP straight to 5.01 from 4.4.4 with the Titan Rom located in the General forum.
luthifer said:
Hello All.
I recently picked up a Comsumer Cellular Moto G 2014 Model XT1064. I am currently trying to allow it to receive OTA updates or at the very least upgrade it to lollipop. I've followed this guide [here] and I have unlocked the bootloader, however I am having trouble getting my hands on proper links. I managed to 'downgrade' to 21.11.13.titan_retuaws.retuaws.en.US cc however I cannot flash any other roms. I tried flashing an XT1068 5.2 rom using fastboot however with the dual sim ROM, I got no service from my sim card.
Information and links seem to be scarce for this model so any finger in the right direction would be appreciated.
Thanks!
Click to expand...
Click to collapse
think this may be your firmware please double check as I only have xt1068
http://www.filefactory.com/file/3yymlw94ra9v/RETUAWS_XT1064_5.0.2_LXB22.46-28_cid9_CFC.xml.zip
5.0.2 firmware installer
https://mega.co.nz/#!msVRSaRI!qFXI7_mCWkVcGF5cgXsL3KHQkpGFH4AiO0_aCQpE8oM
Hi
just fyi in case someone runs into this:
I have WIND Moto X (XT 1097) which was unlocked (I am on Bell Mobility Canada) - with the original 4.4.4 firmware:
system: 21.31.52.victara_retca.retca.en.CA
baseband: MSM8974BP_2147.127.04.57R,VICTARA_RETCA_CUST
I manually flashed the retail 5.01 image (I thought the Wind soak test issues came only from OTA)
RETCA_XT1097_5.0.1_LXE22.46-22_cid14_CFC.xml.zip
After I flashed it 5.01 booted fine, but I lost cellular radio. With no way to DOWNGRADE, I thought I was hosed, but after reflashing the 2 original modem files:
fsg.mbn
NON-HLOS.bin
I was back up in 5.01 Lollipop with the radios working again - so I picked up my Bell signal.
I am just wondering now, is there a way to downgrade from 5.01 to 4.4.4 and have the radios working ? Ideally I'd like to reflash this stock image:
RETCA_XT1097_4.4.4_KXE21.187-52_cid14_CFC.xml.zip
Thank you
spiritflare said:
Hi
just fyi in case someone runs into this:
I have WIND Moto X (XT 1097) which was unlocked (I am on Bell Mobility Canada) - with the original 4.4.4 firmware:
system: 21.31.52.victara_retca.retca.en.CA
baseband: MSM8974BP_2147.127.04.57R,VICTARA_RETCA_CUST
I manually flashed the retail 5.01 image (I thought the Wind soak test issues came only from OTA)
RETCA_XT1097_5.0.1_LXE22.46-22_cid14_CFC.xml.zip
After I flashed it 5.01 booted fine, but I lost cellular radio. With no way to DOWNGRADE, I thought I was hosed, but after reflashing the 2 original modem files:
fsg.mbn
NON-HLOS.bin
I was back up in 5.01 Lollipop with the radios working again - so I picked up my Bell signal.
I am just wondering now, is there a way to downgrade from 5.01 to 4.4.4 and have the radios working ? Ideally I'd like to reflash this stock image:
RETCA_XT1097_4.4.4_KXE21.187-52_cid14_CFC.xml.zip
Thank you
Click to expand...
Click to collapse
JUst do exactly the same process BUT dont flash fsg.mbn and NON-HLOS.bin. and your phone will restart on 4.4.4 with radio signal
The 5.0.1 image you flashed was the Telus image, not the Wind Mobile image, which is why you lost your radio. You can flash the original Wind mobile 4.4.4 firmware and you will be back to 4.4.4. You will need to flash the files manually(mfastboot) instead of using RSDlite as one of them will fail as it doesn't allow downgrades, this isn't an issue though.
No this won't work because it gives downgrade errors.
Steve
Hi, not flashing using rsdlite - using mfastboot.
Would you have a link to the original Wind firmware or the full name of the retail Wind firmware image ?
Also - seeing my phone is supposedly unlocked (works now on bell) why would flashing the telus radio vs wind break ?
Thank you!
No this won't work because it gives downgrade errors using mfastboot
Steve
Hi
The 4.4 and 5.01 image didn't have any reference to Telus or wind they both said RETCA. However If you have the name of the Wind retail 4.4 image I'd appreciate it.
I flashed
TMO_Retail_XT1053_5.1_LPA23.12-15.222.21.15.ghost_row.Retail.en.US
and XT1058_GHOST_RCICA_5.1_LPA23.12-15_cid14_CFC.xml
today, both get no signal and IMEI is "0"
It happened before when I was flashing RETAIL-XT1058_BR_5.1-222.21.7-BR and I fixed it by flashing (NON-HLOS, fsg, motoboot) from ATT_XT1058_4.4.4-KXA21.12-L1.26_CFC_1FF.xml
When I tried to do the same thing today, I get the error
downgraded security version
update sbl3 failed
Do anyone know how to fix this?
I use ATT in US.
I am not sure about my phone model. I believe I picked US Celluar Factory Unlocked phone, but it writes Model: xt1053 at back
You should've only flashed what's for your model only. If it says xt1053 in the back of the phone, only I repeat ONLY flash official firmware that is only for your phone. If you flash a different models firmware, then it causes hard brick. Since you flashed 5.1, there is no possible way to downgrade at the moment. And if it was uscc, it would say xt1055. I know because I have one.
Sent from my Moto X using Tapatalk
flash manually tmo retail xt1053 rom thats for you phone.
days ago i flashed brazil retail radio on top of my xt1053 with official stock US OTA 5.1 and got imei 0 as well. fixed it downloading tmo retail rom and flashing that radio only (NON-HLOS.bin and fsg)
Sent from my XT1053 using Tapatalk
if i update to 5.1 ota i lose internet data i had to go back to previous version 5.02.
Anyone know how to fix this on 5.1 us cellular moto x?
bump
yunior597 said:
if i update to 5.1 ota i lose internet data i had to go back to previous version 5.02.
Anyone know how to fix this on 5.1 us cellular moto x?
Click to expand...
Click to collapse
I just flashed the 5.1 pure edition over my XT1097 and everything is working great because the update has the bands of almost all the major carriers. If you update and you lose signal, data or IMEI just flash the modem of your original version and everything should work.
juliospinoza said:
I just flashed the 5.1 pure edition over my XT1097 and everything is working great because the update has the bands of almost all the major carriers. If you update and you lose signal, data or IMEI just flash the modem of your original version and everything should work.
Click to expand...
Click to collapse
the problem is xt1093 is cdma and no other rom works with it.
yunior597 said:
the problem is xt1093 is cdma and no other rom works with it.
Click to expand...
Click to collapse
did you flash the XT1093 firmware 5.1 and you lose signal? weird, because is the official for you model
http://www.filefactory.com/file/1fib372p0cbv/VICTARA_USC_XT1093_5.1_LPE23.32-21.3_cid9_CFC.xml.zip
I flashed the XT1093 version months ago over my 1097 because was the first to get 5.0.2 and stuck at "registering phone, please wait", what I did was to dirty flash over different version.
I understand that CDMA supports diffrentes bands but as I said, if you lose signal after the 5.1 update just try to flash the modems of the 5.0.2 or 5.0 of the XT1093
yes i flashed the original one... i even ota updated it.... seems to be problems with that version. not losing signal, only cant connect to data/internet.
Flash modem files from motorolas own stock image, worked for me
Sent from my XT1095 using XDA Free mobile app
My question is this, my phone is a Moto G 2014 XT1063 you install by backup upgrade to 6.0 for the model XT1068 all is well and my bootloader is in (48.82), now that is coming via OTA Update for the XT1063 US I wanted to return to the stock ROM to receive the OTA, which firmware should I download if I have no problem returning to 5.0.2 using the script of "Alkalinorap"
Thank you
Note: I do not want to leave my Moto useless