New message alert sound loops [ROM][OFFICIAL][7.0]Tesla-N - OnePlus 3 Guides, News, & Discussion

Hi,
I just flashed my OnePlus3 with this rom. Works really smooth and stable.
There is thow one bug; message alert sound loos sometimes until restart. There is no message/alert to close, yet it plays the tune over and over again.
any advice?
Kari

Karl_J0han said:
Hi,
I just flashed my OnePlus3 with this rom. Works really smooth and stable.
There is thow one bug; message alert sound loos sometimes until restart. There is no message/alert to close, yet it plays the tune over and over again.
any advice?
Kari
Click to expand...
Click to collapse
I am using Tesla for 2 days now and dont have any bug

Related

Weird Bugs

Ive installed the latest cyanogen mod rom and i have been using it for a while. There are a few bugs i have noticed through my use of the phone and they are kinda getting annoying.
First of all i have noticed randomly while i am listening to music the music app that came with cyanogen will freeze up and then it will start again but after it does that there is no sound. And when i force close the application, i use the controls on the side of the phone to change the volume and it will only change the media volume not the ringer volume. to fix this when it happens i have been having to restart the phone and go on from there.
Another bug i have been noticing is when i turn the phone to vibrate mode using the controls on the left of the phone when i recieve a text i do not get a notification. I would excpect that it would vibrate as well.
Another one is that when i am listening to music and i recieve a text it will turn off the sound similar to the first bug i talked about. It says it is still playing but there is no sound coming from it. To fix it i have been having to restart the phone.
To listen to my music with my earphones i have an adapter and some times when i am using that the phone will go into a reboot loop until i take out the adapter and then once the phone is back up plug the adapter back in.
These are all quite annoying and i would like to see if you guys have any input on the matter. Thank you
I don't think that any of these are platform bugs, but rather are cyanogen bugs. I suggest you post bug reports to cyanogen's bug tracker.
lbcoder said:
I don't think that any of these are platform bugs, but rather are cyanogen bugs. I suggest you post bug reports to cyanogen's bug tracker.
Click to expand...
Click to collapse
Well i thought about that as well but i looked at the rules for the bug tracker and i am currently in the process of making more accurate bug reports for the bug tracker. I came here to see if i could get any quick fixes or to ask if these are common things or i may just have to format my phone and reinstall cyanogen. So yeah i hope i can get some feedback from other users. I may just have to format as i said but i hope that there could be something else i could do. dont want to just go to all that trouble to not get it fixed.
edit: I looked further into the bug tracker for cyanogen and i dont have the required materials to make a report as i dont have a log of the issue. its just something that tends to happen.
Its happening alot today and well yeah its getting really bad, i dont think there is anything wrong with my phone. So i think i am just going to format and reinstall a new rom. idk if i will stay cyanogen or not. anyone have any recomendations for the rom i should install?
Super D is pretty awesome. It's an improvement on the Cyan roms. So you get Cyan plus some extras.
Could i get a link to the correct version i should use?
Yep here is the link for Super D
thank you installed it and i am no longer having any issues. Wonderful

GingerDX Screen-ON animation lag

GingerDX lags for 3 seconds every time when it has to turn screen on to accept phone calls.. also lags few seconds everytime i want to unlock.. any fixes for this?
or isit a CM7 problem?
Zj89 said:
GingerDX lags for 3 seconds every time when it has to turn screen on to accept phone calls.. also lags few seconds everytime i want to unlock.. any fixes for this?
or isit a CM7 problem?
Click to expand...
Click to collapse
i have the same problem, when someone calls me the phone starts ringing but the screen stils for 3/5 seconds only showing the statusbar.
i only get this only in call screen 1-2 seconds lag but don't have lag in look screen gdx 011 no o/c.
i remove some of the system apk files that i don't use ie theme chooser, a theme and some other's
Try using GoDialerEx and see if the problem persists. Could just be an oddity with the stock dialler.
You wipe the phone before putting the rom on your phone? I didn't at first but did just last night and it fixed most of my issues TBH.
yeah i always do factory wipes before rebooting new roms.. i didn't have this problem with froyobread so i'm guessing its a cm7 problem.. =(
Zj89 said:
yeah i always do factory wipes before rebooting new roms.. i didn't have this problem with froyobread so i'm guessing its a cm7 problem.. =(
Click to expand...
Click to collapse
Maybe I get lag sometimes but it is not to that level and I use GingerDX V011. Usually a second or so. Was way worse before I did a full wipe. Sound distortion and sometimes couldn't even answer calls as phone froze.
I didn't realise the difference a full wipe would make, how naive of me

Call problems with ICS

I recently swtiched my ROM to RemICS-UX from a stock Gingerbread. I have been having problems with calls ever since. When I get a call, I answer it and cannot hear any sound, while the person who called can hear me. Just like that, I can call someone but cannot hear the other side.
This doesn't happen all the time. Most of the time I can call people without problems but it happens at least once everyday. A restart is required when this happens. It goes back to normal after restart. I never experienced this with Gingerbread. Really annoying..
I am quite happy with RemICS-UX otherwise, it is really fast so I don't want to switch to Gingerbread again.
My current kernel is Semaphore_ICS but this happened with the kernel, which came with RemICS-UX as well. Any suggestions?
zewzeq said:
I recently swtiched my ROM to RemICS-UX from a stock Gingerbread. I have been having problems with calls ever since. When I get a call, I answer it and cannot hear any sound, while the person who called can hear me. Just like that, I can call someone but cannot hear the other side.
This doesn't happen all the time. Most of the time I can call people without problems but it happens at least once everyday. A restart is required when this happens. It goes back to normal after restart. I never experienced this with Gingerbread. Really annoying..
I am quite happy with RemICS-UX otherwise, it is really fast so I don't want to switch to Gingerbread again.
My current kernel is Semaphore_ICS but this happened with the kernel, which came with RemICS-UX as well. Any suggestions?
Click to expand...
Click to collapse
Hmm.. u shud do all three wipes and then in clear data of phone.apk
If my post helped, don't mind hitting THANKS
Sent from my GT-I9000 using xda app-developers app
I think I found the problem. It is the Spirit FM application i'm using. I haven't been using it for a week and never encountered the problem again.

[Q] Need to wait a while for the screen to turn on

Hey,
So my dad isnt exactly satisfied with the custom ROM I flashed on his device, he needs to wait about 4 - 5 seconds (!) when theres an incoming call for the screen to turn on. The ringtone will keep on going off during that few seconds, but the screen will be black.
So I tested it on my Nexus 4, and no such issue has been spotted by me. Although, on his device, no matter how many times I tried, the issue was never gone and I had to wait a couple of seconds for the screen to turn on so I could see who's calling.
I'm not sure whether it is a kitkat issue or not, I tried 2 different roms, first BeanStalk, and now CyanFox, both had the same issue.
I also tried to flash CM10.1, but the keyboard kept on crashing after a fresh flash, wipes didnt help (maybe someone could give me a hand here?).
Another question is, where can I find some good call recording app? the ones from the play store aren't good, they only record one side of the call, never both
tl;dr:
is there some setting that I should change for the screen to turn on quicker when theres an incoming call on kitkat?
what to do if I want to downgrade from kitkat to jellybean?
is there some GOOD call recorder app around?
thank you
Pawelss said:
Hey,
So my dad isnt exactly satisfied with the custom ROM I flashed on his device, he needs to wait about 4 - 5 seconds (!) when theres an incoming call for the screen to turn on. The ringtone will keep on going off during that few seconds, but the screen will be black.
So I tested it on my Nexus 4, and no such issue has been spotted by me. Although, on his device, no matter how many times I tried, the issue was never gone and I had to wait a couple of seconds for the screen to turn on so I could see who's calling.
I'm not sure whether it is a kitkat issue or not, I tried 2 different roms, first BeanStalk, and now CyanFox, both had the same issue.
I also tried to flash CM10.1, but the keyboard kept on crashing after a fresh flash, wipes didnt help (maybe someone could give me a hand here?).
Another question is, where can I find some good call recording app? the ones from the play store aren't good, they only record one side of the call, never both
tl;dr:
is there some setting that I should change for the screen to turn on quicker when theres an incoming call on kitkat?
what to do if I want to downgrade from kitkat to jellybean?
is there some GOOD call recorder app around?
thank you
Click to expand...
Click to collapse
If you still on cm10.1 then download keyboard from market and you are good to go Also stock 4.1.2 has this lag issue when incoming call its pretty annoying really
tuncay_93 said:
If you still on cm10.1 then download keyboard from market and you are good to go Also stock 4.1.2 has this lag issue when incoming call its pretty annoying really
Click to expand...
Click to collapse
hey, thanks for your reply
actually no, STOCK 4.1.2 didnt have this issue, it started to show when I flashed 4.4.2 on it, is there some sort of fix for this or do I have to downgrade to JB? I'd rather stick to KK as I prefer it more.
on the other hand my dad hated google hangouts and he wants the stock messaging app back, I guess I can only go with CM
also I cant install a keyboard from the market, because I cant even log in to my google account, I cant get through the setup without a few things crashing over and over again, every second or so. the keyboard doesnt even show up
delete the latinIme.apk from the zip file you are trying to flash and substitute it with one from the other roms you tried flashing.
I know how to control the delay with which the ringer starts but not screen :s
These commands I think only help when call ends but it doesn't hurt to try, add them (or check the values if already present)
to build.prop in zipfile before you flash it
Code:
ro.lge.proximity.delay=5
mot.proximity.delay=5
I am on kitkat right now and have no lag issue...have you tried changing kernel?
Rudjgaard said:
delete the latinIme.apk from the zip file you are trying to flash and substitute it with one from the other roms you tried flashing.
I know how to control the delay with which the ringer starts but not screen :s
These commands I think only help when call ends but it doesn't hurt to try, add them (or check the values if already present)
to build.prop in zipfile before you flash it
Code:
ro.lge.proximity.delay=5
mot.proximity.delay=5
I am on kitkat right now and have no lag issue...have you tried changing kernel?
Click to expand...
Click to collapse
hey, thanks for your reply
I flashed Nameless ROM and surprisingly the lag issue is gone, and due to stripped gapps I flashed, I got the old messaging app back, which is quite the perfect combo, now the only thing I am missing is a good call recording app, is there a chance you can suggest one to me?
thanks again!
Pawelss said:
hey, thanks for your reply
I flashed Nameless ROM and surprisingly the lag issue is gone, and due to stripped gapps I flashed, I got the old messaging app back, which is quite the perfect combo, now the only thing I am missing is a good call recording app, is there a chance you can suggest one to me?
thanks again!
Click to expand...
Click to collapse
Still havent tried nameless but i did red the thread about it. Seems everyone likes it. It should be good
tuncay_93 said:
Still havent tried nameless but i did red the thread about it. Seems everyone likes it. It should be good
Click to expand...
Click to collapse
well I tried it out, the rom is nice and all, but my phone is extremely slow, the lag issue with phone calls is back, sometimes turning the screen off is impossible, or takes up to 2 minutes (!). turning it back on isnt much better either, I dont know what the problem is, the same thing happened on the BeanStalk ROM so I assume it isnt a software issue, but a hardware one, do you have any ideas what could be the problem and how can I solve it?
I want to tell you my experience about custom roms.
I don't know if you tried this combo: CM11 + kicos kernel (modified iodak's kernel) + minimal PA gapps
I works for me very well.
LGaljo said:
I want to tell you my experience about custom roms.
I don't know if you tried this combo: CM11 + kicos kernel (modified iodak's kernel) + minimal PA gapps
I works for me very well.
Click to expand...
Click to collapse
yeah, but shouldnt all the 4.4.2 ROMs be quite snappy? doesn't kitkat reduce the hardware requirements? why would JB work fine (or so I think, I'll go back to stock in a few mins and see) and KK be laggy as hell?
I've got a theory, I'm not a hardware guy and I dont know if I'm right or not, but:
could be that one of the cores is damaged and the system tries to switch some tasks to the damaged core (if android handles different cores the way I think) and that core doesnt really work the way it should, causing the entire system to work like a granny?
Pawelss said:
well I tried it out, the rom is nice and all, but my phone is extremely slow, the lag issue with phone calls is back, sometimes turning the screen off is impossible, or takes up to 2 minutes (!). turning it back on isnt much better either, I dont know what the problem is, the same thing happened on the BeanStalk ROM so I assume it isnt a software issue, but a hardware one, do you have any ideas what could be the problem and how can I solve it?
Click to expand...
Click to collapse
This is probably some wake/lock problem with software. Also on my o2x i've noticed strange lag when i press the power key it has lag until the screen comes on buttons below the screen light and after a couple of seconds the screen. It has 4.3 CM rom there if your father is using this phone i would suggest you some stock based rom with custom kernel. They should not have problems like these.
tuncay_93 said:
This is probably some wake/lock problem with software. Also on my o2x i've noticed strange lag when i press the power key it has lag until the screen comes on buttons below the screen light and after a couple of seconds the screen. It has 4.3 CM rom there if your father is using this phone i would suggest you some stock based rom with custom kernel. They should not have problems like these.
Click to expand...
Click to collapse
That still the best sollution for him - optimized kernel with stable ROM. He probably isn't techno freak?
tuncay_93 said:
This is probably some wake/lock problem with software. Also on my o2x i've noticed strange lag when i press the power key it has lag until the screen comes on buttons below the screen light and after a couple of seconds the screen. It has 4.3 CM rom there if your father is using this phone i would suggest you some stock based rom with custom kernel. They should not have problems like these.
Click to expand...
Click to collapse
could be, however, it isnt only for the power button, when the screen is off and a call is coming, it needs a few seconds for the screen to turn on, after the call is done, the system is all choppy and laggy. Turning the screen off after that is also nearly impossible, due to power button malfunction. I went back to stock for now and I'll see if the lag is gone, if it isnt, then its probably a hardware issue.
edit:
yeah, I'm on stock 4.1.2 and the issue isnt gone.
crap.
sounds like a problem in the timing the processor uses for scaling frequencies...
hav no idea what could be causing it unless you have some kernel tweak app and set wrong values
Have you tried clean flashing the Roms you installed? Have you Factory-Reset, Cleared cache, cleared Dalvik cache, and maybe did a system partition format before flashing?
Inviato dal mio GT-P3110 utilizzando Tapatalk

No matter what I do, I always have problems

hello all, ive just been having these issues, their always random, either its screen of death, random reboots, google services f/c'ing, it doesnt matter what rom i flash, or if i fastboot back to stock, nothing changes, theres always "something" that goes wrong. I've tried, and tried and tried but something always seems to be messed up with this phone. I dont know what im doing wrong, I've been flashing roms for years and never had so many problems, except, I had these same issues on the nexus 5, same thing.
anybody ells going through this? or is it just me?
i have both nexus 5 and nexus 6, i know both of them very well, is there anything i can help you with? ive figured out solutions to the majority of random things theyve thrown at me..
Thanks for the help. Well, every rom i try has browser f/cs, google play f/cs random reboots sometimes it reboots and wipes cache for some reason. Sometimes its like system ui f/cs so it just does a "soft" reboot, i have audio issues even on stock, like when i get a call, the ringtone starts out real quiet then boosts all the way up, sound is distorted over 50%, i tried to up my voltage by 15mv global and that didnt help anything..... Im not sure what to do, i already switched out the phone once, i think im at the end of my 15 day byers remorse period
Sent from my Nexus 6 using Tapatalk
Andromendous said:
Thanks for the help. Well, every rom i try has browser f/cs, google play f/cs random reboots sometimes it reboots and wipes cache for some reason. Sometimes its like system ui f/cs so it just does a "soft" reboot, i have audio issues even on stock, like when i get a call, the ringtone starts out real quiet then boosts all the way up, sound is distorted over 50%, i tried to up my voltage by 15mv global and that didnt help anything..... Im not sure what to do, i already switched out the phone once, i think im at the end of my 15 day byers remorse period
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Ima jump in here and try to provide a helpful response.
The nexus 6 is the best device I've ever owned beside my beloved g2, I did have to get my nexus 6 replaced the second day I had it because of a battery issue, but no problems ever since.
As far as the Gapps force closing, try using a different set of Gapps. I prefer to use the latest version of the multirom twrp and always use Banks Gapps(pm me if you can't find them.)
Only onn two, maybe three, roms have I had soft reboots/blackscreens/systemui closes. And most of the time they can be solved with a different kernel and a bit of tuning with an app such as faux123 or kernel auditor.
Audio problems can be hard to fix, but let's make sure you can distinguish the problems from the features. An example of a common misconceptions is the audio "clipping" or "lagging" when rotating the screen. This is a feature, it is swapping the left and right channels to keep the audio correct. There is a build prop line you can edit to diable this.
The phone ringtone volume steadily increasing is also a feature in most roms, including stock. It can be found in Settings>sound and notifications> and somewhere near the vibrate option.
Sound distortion is a problem I suffered from on older roms. I eventually started using viper4android on ALL of the roms I install with the superior audio driver (power drain is unnoticeable). All the settings are super easy to use, and easy to discover while playing a song and listening to the differences. Just make sure selinux is set to permissive.
I don't think increasing/decreasing the voltage can be any good for the hardware. If your car says "premium only" then you shouldn't run regular or racing fuel, you should stick to what was intended to work. You can kill battery life, starve the cpu/gpu, increase lag and overheating when messing with voltages.
Try this.
Go get the LATEST version of twrp, go find the Pure nexus rom and download it and Banks gapps, also go find francos kernel and download the latest release.
WIPE EVERYTHING TWICE (cache, dalvik, system, data) and install ROM>KERNEL>GAPPS and reboot into your super stable phone!
Message me for anything else!
Andromendous said:
Thanks for the help. Well, every rom i try has browser f/cs, google play f/cs random reboots sometimes it reboots and wipes cache for some reason. Sometimes its like system ui f/cs so it just does a "soft" reboot, i have audio issues even on stock, like when i get a call, the ringtone starts out real quiet then boosts all the way up, sound is distorted over 50%, i tried to up my voltage by 15mv global and that didnt help anything..... Im not sure what to do, i already switched out the phone once, i think im at the end of my 15 day byers remorse period
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
what bin number does your phone have? try raising your cpu, inly at your highest cpu, by 20-30mV more. about it wiping the cache, what build android are you on? it used to do that to me all the time, but not since android 5.1.1 hit aosp.
noidea24 said:
Ima jump in here and try to provide a helpful response.
The nexus 6 is the best device I've ever owned beside my beloved g2, I did have to get my nexus 6 replaced the second day I had it because of a battery issue, but no problems ever since.
As far as the Gapps force closing, try using a different set of Gapps. I prefer to use the latest version of the multirom twrp and always use Banks Gapps(pm me if you can't find them.)
Only onn two, maybe three, roms have I had soft reboots/blackscreens/systemui closes. And most of the time they can be solved with a different kernel and a bit of tuning with an app such as faux123 or kernel auditor.
Audio problems can be hard to fix, but let's make sure you can distinguish the problems from the features. An example of a common misconceptions is the audio "clipping" or "lagging" when rotating the screen. This is a feature, it is swapping the left and right channels to keep the audio correct. There is a build prop line you can edit to diable this.
The phone ringtone volume steadily increasing is also a feature in most roms, including stock. It can be found in Settings>sound and notifications> and somewhere near the vibrate option.
Sound distortion is a problem I suffered from on older roms. I eventually started using viper4android on ALL of the roms I install with the superior audio driver (power drain is unnoticeable). All the settings are super easy to use, and easy to discover while playing a song and listening to the differences. Just make sure selinux is set to permissive.
I don't think increasing/decreasing the voltage can be any good for the hardware. If your car says "premium only" then you shouldn't run regular or racing fuel, you should stick to what was intended to work. You can kill battery life, starve the cpu/gpu, increase lag and overheating when messing with voltages.
Try this.
Go get the LATEST version of twrp, go find the Pure nexus rom and download it and Banks gapps, also go find francos kernel and download the latest release.
WIPE EVERYTHING TWICE (cache, dalvik, system, data) and install ROM>KERNEL>GAPPS and reboot into your super stable phone!
Message me for anything else!
Click to expand...
Click to collapse
Thanks for the info. As for the google f/cs, so far that was only on one rom, and i havent had it since. Only browser f/cs are what im dealing with now. As for the sound. I understand the differences between the features, this is not a feature, i know what you mean by increasing ringtone, my issue is nothing like that, its not like, the sound slowly gets louder and louder... It starts out real quiet, and then BOOM full volume. Sometimes the speakers pop a little. Its weird, because it only does this the very first time a sound is played, if i have for instance, touch sounds enabled, and go through my ringtones, i dont have any sound issues. But if i turn off touch sounds, then go back to ringtones, the very first one i select will be reeeeal low.... And then BOOM full volume. This was the very first thing i checked when i switched out phones, and the very first time i tryed it on the brand new phone it did this very same thing. I just assumed it was a known issue.
Sent from my Nexus 6 using Tapatalk
simms22 said:
what bin number does your phone have? try raising your cpu, inly at your highest cpu, by 20-30mV more. about it wiping the cache, what build android are you on? it used to do that to me all the time, but not since android 5.1.1 hit aosp.
Click to expand...
Click to collapse
bin number? do you mean BUILD number? I have the tmobile variant of the nexus 6, before i started flashing roms, the first thing i did was download the factory image of 5.1.1 for the tmobile version, which is (LYZ28E), then i found the unenforced encryption boot.img someone posted which is the same boot.img, I unlocked, flashed the stock 5.1.1 image, unencrypted the device, then went on to flashing roms, right now, im on cyanideL which is LYZ28E, and so far, ive had two reboots, one of them had wiped cache by itself apon rebooting, same sound issues, same browser force closing, i even tried chrome, which force closed the second i loaded a web page, other than that, taptalk, g+ hangouts all work fine, its just these 3 or 4 same issues with pretty much all roms
Andromendous said:
bin number? do you mean BUILD number? I have the tmobile variant of the nexus 6, before i started flashing roms, the first thing i did was download the factory image of 5.1.1 for the tmobile version, which is (LYZ28E), then i found the unenforced encryption boot.img someone posted which is the same boot.img, I unlocked, flashed the stock 5.1.1 image, unencrypted the device, then went on to flashing roms
Click to expand...
Click to collapse
ok, got ya.
which browser do you use btw?
simms22 said:
ok, got ya.
which browser do you use btw?
Click to expand...
Click to collapse
sorry, i edited my post above, I try to use AOSP, which seems to be the best, it force closes the least, but chrome immediately f/c's, firefox works pretty good too, but it has graphical glitches all over the place,
ugh..... so i just wiped everything twice and flashed pure nexus rom, and i have no service, at all... . it just never ends.
Andromendous said:
ugh..... so i just wiped everything twice and flashed pure nexus rom, and i have no service, at all... . it just never ends.
Click to expand...
Click to collapse
reboot.
try this rom, with the latest gapps, and supersu, its Terminus https://goo.gl/ojD6Z6
now i know that this rom has no issues. if you start developing issues, its either something that your doing, or defective(or something else?).
simms22 said:
reboot.
try this rom, with the latest gapps, and supersu, its Terminus https://goo.gl/ojD6Z6
now i know that this rom has no issues. if you start developing issues, its either something that your doing, or defective(or something else?).
Click to expand...
Click to collapse
well, its definitely getting interesting. I just tried optipop, and my sound was working normaly! but to my amazement, it was very laggy and system animations werent working correctly, if i backed out of a screen, sometimes it would slide down, sometimes the creen would just flash white and would switch to the last screen, if that makes any sense. I got the same thing as all roms, no network, but i went and searched for networks and it failed, but then my network signal popped up, and when i tried it a gain, tmobile popped up.
so now im trying tremindous, and its doing the same thing with the network, im testing everythnig ells now.
BTW, what kernel would you suggest?
Andromendous said:
BTW, what kernel would you suggest?
Click to expand...
Click to collapse
either elementalx, vindicator, despair, or lean kernel.
simms22 said:
either elementalx, vindicator, despair, or lean kernel.
Click to expand...
Click to collapse
Why not Franco kernel? Just a question
gee2012 said:
Why not Franco kernel? Just a question
Click to expand...
Click to collapse
he doesn't include ondemand and no oc. i know his conservative is similar to ondemand, but its not the same. and i strictly use ondemand. about oc, he made me an oc kernel that i used for a little, but its old now. amyways, i dont really use his kernel, but we are still friends
simms22 said:
he doesn't include ondemand and no oc. i know his conservative is similar to ondemand, but its not the same. and i strictly use ondemand. about oc, he made me an oc kernel that i used for a little, but its old now. amyways, i dont really use his kernel, but we are still friends
Click to expand...
Click to collapse
How is OC for batterylife? Is there a big difference when you OC to say 3Ghz and what about heat issues or do you undervolt?
gee2012 said:
How is OC for batterylife? Is there a big difference when you OC to say 3Ghz and what about heat issues or do you undervolt?
Click to expand...
Click to collapse
i get from 5-6.5h sot using 3033mhz/300mhz ondemand/deadline. and the n6 doesnt have a heat issue. in fact, i have a hard time getting it over 75C whwn im pushing it to try and get hot.
simms22 said:
i get from 5-6.5h sot using 3033mhz/300mhz ondemand/deadline. and the n6 doesnt have a heat issue. in fact, i have a hard time getting it over 75C whwn im pushing it to try and get hot.
Click to expand...
Click to collapse
Ok, running Terminus with the latest hellscore kernel and i cant believe it but everything is working good so far. Gonna test some more now. Thanks for the help simms
Andromendous said:
Ok, running Terminus with the latest hellscore kernel and i cant believe it but everything is working good so far. Gonna test some more now. Thanks for the help simms
Click to expand...
Click to collapse

Categories

Resources