hello . when i was flashing cm14.1 on my device , the error 7 caused to stop installing progress .
then i opened the partition option in twrp3 and choosed the legacy storage to set partition .
After doing partition settings i rebooted the phone but my phone dont reloaded at all .
even Sony logo was not displayed . . . . . . Power Button is not working .
the phone can not connent in fastbootmod and flashmod in flashtools . blue lamp of fastboot mod Does not turn on .
my phone is completely killed . it is not work at all . ......... it is probably hardbriked .
What is the way to solve the problem ?
excuse me . I do not know English well
Please reply
I am still waiting
no led . no vibrate . no fastboot & flashmod .
QHSUSB_DLOAD showed when connect it to pc .
Related
Hi all ,
Please help me . When I upgrade my liquid by acer-a1-tool . suddenly my acer liquid is close and the acer-a1-tool tell me your device it is not connect .
After that I am separated wire from my liquid and I am try to turn on my acer liquid but it did not respond . And the all buttons not respond .
Please help me . Because it is new and I am bought is before 2 weeks .
Sorry my English is poor .
help is here !
try copying the .zip files of any custom rom.. n then copy to SD card n insert in phone n run the phone is recovery mode (volume dwn + camera + power)
phone will vibrate thrice n then release the buttons.. u r ready to insatll the new rom..
or
if u want to get it done on A1 tool, then proceed normally, if it tells device not connected or something, simply unplug the usb (from phone, NOT from PC) and re-insert. A1 tool will re detect n proceed with installation !
cheers
iDiamond said:
Hi all ,
Please help me . When I upgrade my liquid by acer-a1-tool . suddenly my acer liquid is close and the acer-a1-tool tell me your device it is not connect .
After that I am separated wire from my liquid and I am try to turn on my acer liquid but it did not respond . And the all buttons not respond .
Please help me . Because it is new and I am bought is before 2 weeks .
Sorry my English is poor .
Click to expand...
Click to collapse
Go to modaco. there are more developpers for liquid. I think someone could help you
I have S3 mini GT-I8910 .. I have Tried to root it sing "CR-root" for S3 ... the device caught an isuse
then i solved this problem by flash my device using odin v3 ... and installing rooted firmware .. and solved the probem with PARAM_i8190
and everything is done well .. but I have some probles i found that my device status changed to " Modified "
and in download mode ... el flash count is not = 0 .. =1 ... and system status is :custom... and current binary is :custom
i have tried to isnstall Triangle away v2.6 and it did'nt work ... msg shwn " No Magic header "
not only this ... wehen i do Factory Rest from Settings ... the phone rest and freeze ... and to solve this problem flash .. I Param ..
:ssss
soo .. how can i solve this problem ... PLZ HELP MEE
what problem ? reseting custom binary counter ? there is no solution for it at the moment.
enox.co said:
what problem ? reseting custom binary counter ? there is no solution for it at the moment.
Click to expand...
Click to collapse
as a reslut of this problem ... i can't do Factory Rest... even on flashing Wipe_I8910 ... !!!
i found ... on rest counter on ACE devices .. that the file "/dev/block/mmcblk0 " is responsiple for the counter !
so if that can help :/
how i cant access this file ??
Ghannam said:
I have S3 mini GT-I8910 .. I have Tried to root it sing "CR-root" for S3 ... the device caught an isuse
then i solved this problem by flash my device using odin v3 ... and installing rooted firmware .. and solved the probem with PARAM_i8190
and everything is done well .. but I have some probles i found that my device status changed to " Modified "
and in download mode ... el flash count is not = 0 .. =1 ... and system status is :custom... and current binary is :custom
i have tried to isnstall Triangle away v2.6 and it did'nt work ... msg shwn " No Magic header "
not only this ... wehen i do Factory Rest from Settings ... the phone rest and freeze ... and to solve this problem flash .. I Param ..
:ssss
soo .. how can i solve this problem ... PLZ HELP MEE
Click to expand...
Click to collapse
The only problem is that your download count isn't at 0. Get used to it for now. The devs are working on it, just be patient. Development on this phone is progressing pretty fast, considering it was released a month and a half ago (for example, there's official CWM and TWRP recoveries already and there's a working-ish CyanogenMod port available to be compiled).
its not so fast. we dont have any roms and we are not supported as other phones
Shapeshift said:
its not so fast. we dont have any roms and we are not supported as other phones
Click to expand...
Click to collapse
said the one who calls himself a "Galaxy S3 mini" developer.
Shapeshift said:
its not so fast. we dont have any roms and we are not supported as other phones
Click to expand...
Click to collapse
okk .. is there any solution for factory rest ???
yes i am a developer but since i have no grounds where cani start developing? I can start porting MIUI or anything but that doesnt mean it will work properly. i have ported it but it only boots there are serious issues with it
I personally think that a developer saying that there is no development very hilarious, please don't take it as an insult, just laugh with me
Sent from my GT-I8190 using xda app-developers app
Ghannam said:
I have S3 mini GT-I8910 .. I have Tried to root it sing "CR-root" for S3 ... the device caught an isuse
then i solved this problem by flash my device using odin v3 ... and installing rooted firmware .. and solved the probem with PARAM_i8190
and everything is done well .. but I have some probles i found that my device status changed to " Modified "
and in download mode ... el flash count is not = 0 .. =1 ... and system status is :custom... and current binary is :custom
i have tried to isnstall Triangle away v2.6 and it did'nt work ... msg shwn " No Magic header "
not only this ... wehen i do Factory Rest from Settings ... the phone rest and freeze ... and to solve this problem flash .. I Param ..
:ssss
soo .. how can i solve this problem ... PLZ HELP MEE
Click to expand...
Click to collapse
That works for me (from my galaxy SIII mini XDA Group on facebook)
HOWTO: Root Galaxy SIII mini
Download this ROM: http://www.chip.de/downloads/Android-Jelly-Bean-4.1.2-fuer-Samsung-Galaxy-S3-Mini_61222609.html
Download Odin: http://www.chip.de/downloads/Odin3_12992520.html
Now:
- Turn off your phone
- Press volume down + power + home
- if you see "Download mode" press volume up
- Start odin and connect your phone with usb
- Select the rom in field: pda
- "auto reboot" and "f. reset time" must be checked !!!
- now klick "start"
Done! your SIII mini is rooted
HOWTO: Install CWM on SIII mini
Download: http://www.android-hilfe.de/attachm...workmod-clockworkmod-cwm-recovery-6.0.2.7.zip and unzip!
- Turn off your phone
- Press volume down + power + home
- if you see "Download mode" press volume up
- Start odin and connect your phone with usb
- Select "recovery.tar" in pda
- "auto reboot" and "f. reset time" must be checked !!!
- now klick "start"
Done! CWM is installed!
Now you can install custom Rom's
While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
AlamX said:
While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
Click to expand...
Click to collapse
Use flashtool, it should flash it with no issues. Google it and install the drivers. Download the ftf for your model (C6902, C6903, C6906, or the other one) and flash it. There's a guide on the forums, find it and read it.
AnrgKrshn said:
Use flashtool, it should flash it with no issues. Google it and install the drivers. Download the ftf for your model (C6902, C6903, C6906, or the other one) and flash it. There's a guide on the forums, find it and read it.
Click to expand...
Click to collapse
basic step and always working
Hello everyone .
This morning I was working as normal on my Note n7000 with official stock rom JB 4.1.2 UAE , I was taking some photos , the battery was low , and then he just stopped working , I plug it into charger until 100 % then tried to start it but stays on the Samsung's logo !
I tried to pass the official rom again using odin but the same problem it stays on the Samsung's logo .
only download mode is working , recovery mode shows the green android logo and after that restart to the 1st situation again.
I felt tired and just removed the battery from the phone and let it like that ( did not mean to do that ) and after about 1 hour I turned on the phone and the problem was solved by itself ! But how ?
and what that means ? is that going to happen again ?
what should I do ?
Kindly help me determine where to look fo the problem
Phone : Xperia Z3+ / Z4
Current Software : Marshmellow 6.0.1
Bootloader : Unlocked
Details :
1) Problem started with a regular hang , restarted the phone with force shutdown ( Power + Volume Up ).
2) The phone wont open and no LEDs but it force shutdowns and vibrate three times .
3) when i put it on charger , after a while a Red LED then it went Yellow and a charging screen appeared , the phone started .
4) After that was repeated I repaired the phone and reseted it variable times , then it kept happening .
5) I unlocked the bootloader , then flashed two diffirent FTFs (ROMS) , with still the same issue .
I just want to know what can be wrong with the phone , because this time it wont open with any way , but still force shutdows and gives 3 vibrations .
Thank you
Amr Ashram said:
Kindly help me determine where to look fo the problem
Phone : Xperia Z3+ / Z4
Current Software : Marshmellow 6.0.1
Bootloader : Unlocked
Details :
1) Problem started with a regular hang , restarted the phone with force shutdown ( Power + Volume Up ).
2) The phone wont open and no LEDs but it force shutdowns and vibrate three times .
3) when i put it on charger , after a while a Red LED then it went Yellow and a charging screen appeared , the phone started .
4) After that was repeated I repaired the phone and reseted it variable times , then it kept happening .
5) I unlocked the bootloader , then flashed two diffirent FTFs (ROMS) , with still the same issue .
I just want to know what can be wrong with the phone , because this time it wont open with any way , but still force shutdows and gives 3 vibrations .
Thank you
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
To best assist you with your issue, I'm going to move this thread to your device's Q&A section.
You should receive expert advice there.
Good luck!