Hey Guys,
I'am just really wondering and confused why the Triangle Away won't work on my Device.
I have a (Samsung Galaxy J3 2016 DUOS [SM-J320F]) Phone.
And i want reset my Flash counter, because i want to Unroot my device to have a normally unrooted and unflashed Phone, like a Phone that was bought shortly.
Yes i know that this Firmware isn't supported, but i'am wondering why is it not supported ??? That's massive unfair for the other peoples and i really need to reset my Flash counter.
I Hope anyone can answer me
Related
Hi all,
When re-flash the original ROM of my tab, follow link:
http://forum.xda-developers.com/showthread.php?t=967175
I don't read careful enough, I flash with Heimdall in Ubuntu, include boot.bin file (--primary-boot boot.bin). When success flash, my tab not run again. My battery is full (when began flash) but my tab not run, no live signal: no light, no signal to PC over cable.
What can I do? Should I take the my tab to producer for re-load bootloader?
Thank all.
If the flash went through fine then flashing a primary bootloader is fine as long as the bootloader is for your particular device. However my guess is that in this case the boot.bin you flashed was not designed for your particular tablet.
You can try a custom jig (search the forums), although I don't know if it will work with a busted primary bootloader. Otherwise you'll need to take the tablet back to Samsung and they'll fix it for you.
Benjamin Dobell said:
If the flash went through fine then flashing a primary bootloader is fine as long as the bootloader is for your particular device. However my guess is that in this case the boot.bin you flashed was not designed for your particular tablet.
You can try a custom jig (search the forums), although I don't know if it will work with a busted primary bootloader. Otherwise you'll need to take the tablet back to Samsung and they'll fix it for you.
Click to expand...
Click to collapse
Thank you.
Finish flash, Heimdall notify is success and auto re-boot my tab. But tab shutdown and .... die.
I was search by key "custom jig" and found some solutions, I will try tonight.
Thank you again.
Hello every body.
I have been tested all solution about baterry (included shock baterry), and my baterry is ok. But my tab still dead.
Hello everybody,
My tab can return to download mode now, repair by RIFF JTAG box.
Thank all.
I'm in the same situation. Battery ran out during Odin process. Now it won't acknowledge the Tab when plugged in. I've put it on charge but still nothing.
I am having the same problem, but my tab died in the middle of an odin, failed and now will not turn on. Can someone help me get it going again?
Hi,
Please PM me if you need help with this as I have the necessary tools and skill to revive hard bricked devices and can definitely JTAG any of the TAB variants and work with HTC and Galaxy Phones daily in terms of reviving hard bricks.
hard brick
Hi
after unsuccessful attempt to flash a ROM on my Samsung Galaxy Tab
there is no response from thedevice. It's completely dead. Can you fix
bootloader? Will I have to post the device? Im in UK
brgrds
Tim
Samsung Galaxy Tab (Sprint CDMA) full brick
Hi connexion2005
after unsuccessful attempt to flash a ROM on my Samsung Galaxy Tab
there is no response from thedevice. It's completely dead. Can you fix
bootloader? Will I have to post the device? Im in UK
brgrds
Tim
Hi Tim,
I've responded to your PM as well but I can fix your issue with my JTAG solution. Posting from the UK and getting back to you is no problem at all.
-Josh
I want to reset binary counter on samsung galaxy note n7000 and I flash bootloader of galaxy s2 by odin to my galaxy note n7000. Now my galaxy note can not boot. How can I do for repairing?
Thank for help me.
ysambo said:
I want to reset binary counter on samsung galaxy note n7000 and I flash bootloader of galaxy s2 by odin to my galaxy note n7000. Now my galaxy note can not boot. How can I do for repairing?
Thank for help me.
Click to expand...
Click to collapse
Damn dude that's intense.
Sent from my GT-N7000 using Tapatalk 2
ysambo said:
I want to reset binary counter on samsung galaxy note n7000 and I flash bootloader of galaxy s2 by odin to my galaxy note n7000. Now my galaxy note can not boot. How can I do for repairing?
Thank for help me.
Click to expand...
Click to collapse
Just follow this guide http://forum.xda-developers.com/showthread.php?t=1354888.
I believe you are at step 7 now.
ysambo said:
I want to reset binary counter on samsung galaxy note n7000 and I flash bootloader of galaxy s2 by odin to my galaxy note n7000. Now my galaxy note can not boot. How can I do for repairing?
Thank for help me.
Click to expand...
Click to collapse
Man what were you trying to achieve by flashing the bootloader of S2 ?
Not sure if jig will help you. Try that.
If it does not help then you got a brick. Send it to samsung service center and get a motherboard replacement done at your cost m afraid!
kopitalk said:
Just follow this guide http://forum.xda-developers.com/showthread.php?t=1354888.
I believe you are at step 7 now.
Click to expand...
Click to collapse
Thank you.
I follow you and my phone is work well.
Thank you again.
abhisahara said:
Man what were you trying to achieve by flashing the bootloader of S2 ?
Not sure if jig will help you. Try that.
If it does not help then you got a brick. Send it to samsung service center and get a motherboard replacement done at your cost m afraid!
Click to expand...
Click to collapse
Now my phone is working.
Thanks
ysambo said:
Now my phone is working.
Thanks
Click to expand...
Click to collapse
Did you use JIG to reset your binary counter? How did you do it?
Edit: I have solved the issue. I was able to remove the triangle and the binary counter as mentioned in this thread in post #13 of this thread. Please read the all the 13 posts for proper context.
Galaxy Note Boot Repair Without JTAG / RIFF box ??
I have to ask the originaltor of this thread - how did you fix your 'bricked' Samsung phone?
As I have made the same mistake...
I used odin on the pc and flashed (by mistake) the wrong bootloader into the phone (as part of flashing fresh rom procedure)!
So now....
Basically when I press power on the phone, nothing happens.
When I put the 'jig' into it - nothing happens - no download mode
when I press the recovery key / download key modes - nothing happens
When I plug the charger in - there is no battery charge icon
When I plug the usb cable into the laptop - nothing happens
Basically the phone is bricked and having read a similar thread on how to revive a Samsung without the phone having to be turned on, or the battery in, well I thought to ask.
Many thanks for any replies.
http://forum.gsmhosting.com/vbb/f200/gt-i9100g-usb-boot-repair-here-1488048/
Basically JTAG / RIFF box will repair the boot loader....but are there other ways??
..
Can you help me?
ysambo said:
Thank you.
I follow you and my phone is work well.
Thank you again.
Click to expand...
Click to collapse
I am in the same situation as you, could you tell me if you had to buy the jig thing to make your phone work? Which specific steps from the post did you have to follow? Thanks! Daniel.
http://forum.xda-developers.com/showthread.php?t=1354888
Hey its me danbo
i bricked my note so i thought about sending it to samsung
i have already resetted the binary counter with a jig
so i want to get the old original samsung recovery mode not cwm
can somebody in here help me ?
Phone g n7000
gingerbread 2.3.6
cwm based recovery v 5.5.0.4
Flash a stock rom with pc odin.
the whole rom or only the kernel ?
thanks
What I did was to flash a kernel which resets the counter. Then I began flashing a stock ROM and when it flashed about 50%, I pulled out the battery. This way you can't even enter recovery mode because you get an error.
I had it replaced without any comments.
alexdumitru said:
What I did was to flash a kernel which resets the counter. Then I began flashing a stock ROM and when it flashed about 50%, I pulled out the battery. This way you can't even enter recovery mode because you get an error.
I had it replaced without any comments.
Click to expand...
Click to collapse
Not a bad idea at all.
Heyy people i live in new delhi n was plaining to buy the galaxy note. what is the least price in new delhi that i can get it for.? reply asap
Lakshay Sethi said:
Heyy people i live in new delhi n was plaining to buy the galaxy note. what is the least price in new delhi that i can get it for.? reply asap
Click to expand...
Click to collapse
It's around 30450 INR.
Hi there
I just want to share my bad experience about bricking my s3mini. I had the fantastic idea of installing the wrong baseband version in. It did what I believe a soft-brick . My phone was constantly rebooting showing only the Samsung logo screen with model number. I did try to recover my phone using Odin but It fail all the time. May Be I have not used the right md5 file with Odin, anyway. Didn't work so Trying and trying I have ended using the samsung official Kies software and my mS3 is back to live. How ?
In Keis:
Tools--->firmware upgrade and initialisation--> and the follow the instruction on the screen of Keis.
Hope It will be helpful for someone else.
Sorry about my English
Hello guys
ive soft bricked my T mobile sgh-t759 when trying to update an app from the computer the phone was rooted when this happend
ive send it to the repair service and they fixed it for me now my question is
if i try to root my modile with the same method as last time will it have any chance to soft brick it since for this phone is kind of hard to find a rom and it will get me in trouble if i brick it again
the repair service told me that it may brick if i try it but last time i did not so what should i do
ps: sorry for my bad englisht
gakukid991 said:
Hello guys
ive soft bricked my T mobile sgh-t759 when trying to update an app from the computer the phone was rooted when this happend
ive send it to the repair service and they fixed it for me now my question is
if i try to root my modile with the same method as last time will it have any chance to soft brick it since for this phone is kind of hard to find a rom and it will get me in trouble if i brick it again
the repair service told me that it may brick if i try it but last time i did not so what should i do
ps: sorry for my bad englisht
Click to expand...
Click to collapse
The repair service will probably try to get you not to root. There are no roms for the t759, only for t769.
I guess you could root it again, but dont try to flash recoveries or roms. This is the forum for t679, even thought it has t759's picture on it.
Good luck rooting!
**remember root is at own risk
samsunggalaxyexhibit4g said:
The repair service will probably try to get you not to root. There are no roms for the t759, only for t769.
I guess you could root it again, but dont try to flash recoveries or roms. This is the forum for t679, even thought it has t759's picture on it.
Good luck rooting!
**remember root is at own risk
Click to expand...
Click to collapse
i want to root it to use an app that control processor speed since last time i used it it made my smartphone go 50% faster
i want to know only if i root it with the same app the second time will it cause probs with the rom since last time it did not i will not try to flash a new rom only install some apps that require root
To resurrect an old thread... I think this just happened to me....
Sent from my Samsung Galaxy Rush with Tapatalk.
Devices: Nook Color, Dell XPS 18, Galaxy Rush (All modded)